Skip to contentSkip to conversation

BKL removal

RFC PATCH In review Hans Verkuil 4 participants 24 messages Nov 16, 2010 – Nov 18, 2010

Subsystems (8)
lore
Share & tools
lore
#0 lore raw

v2 cover BKL removal

This is my second patch series for the BKL removal project.

While this series is against the v2.6.38 staging tree I think it would be good to target 2.6.37 instead. A lot of files are changed, but the changes are all trivial. And this will hopefully take care of most of the BKL removal problems, except for uvc.

This patch also contains the improved core locking patch which doesn't lock the VIDIOC_DQBUF ioctl.

Regards,

Hans

Hans Verkuil (15):
v4l2-dev: use mutex_lock_interruptible instead of plain mutex_lock
BKL: trivial BKL removal from V4L2 radio drivers
cadet: use unlocked_ioctl
tea5764: convert to unlocked_ioctl
si4713: convert to unlocked_ioctl
typhoon: convert to unlocked_ioctl.
dsbr100: convert to unlocked_ioctl.
BKL: trivial ioctl -> unlocked_ioctl video driver conversions
sn9c102: convert to unlocked_ioctl.
et61x251_core: trivial conversion to unlocked_ioctl.
cafe_ccic: replace ioctl by unlocked_ioctl.
sh_vou: convert to unlocked_ioctl.
radio-timb: convert to unlocked_ioctl.
V4L: improve the BKL replacement heuristic
cx18: convert to unlocked_ioctl.

 drivers/media/radio/dsbr100.c                |    2 +-
 drivers/media/radio/radio-aimslab.c          |   16 +++---
 drivers/media/radio/radio-aztech.c           |    6 +-
 drivers/media/radio/radio-cadet.c            |   12 +++-
 drivers/media/radio/radio-gemtek-pci.c       |    6 +-
 drivers/media/radio/radio-gemtek.c           |   14 ++--
 drivers/media/radio/radio-maestro.c          |   14 ++---
 drivers/media/radio/radio-maxiradio.c        |    2 +-
 drivers/media/radio/radio-miropcm20.c        |    6 +-
 drivers/media/radio/radio-rtrack2.c          |   10 ++--
 drivers/media/radio/radio-sf16fmi.c          |    7 +-
 drivers/media/radio/radio-sf16fmr2.c         |   11 ++--
 drivers/media/radio/radio-si4713.c           |    3 +-
 drivers/media/radio/radio-tea5764.c          |   49 +++-------------
 drivers/media/radio/radio-terratec.c         |    8 +-
 drivers/media/radio/radio-timb.c             |    5 +-
 drivers/media/radio/radio-trust.c            |   18 +++---
 drivers/media/radio/radio-typhoon.c          |   16 +++---
 drivers/media/radio/radio-zoltrix.c          |   30 +++++-----
 drivers/media/video/arv.c                    |    2 +-
 drivers/media/video/bw-qcam.c                |    2 +-
 drivers/media/video/c-qcam.c                 |    2 +-
 drivers/media/video/cafe_ccic.c              |    2 +-
 drivers/media/video/cx18/cx18-streams.c      |    2 +-
 drivers/media/video/et61x251/et61x251_core.c |    2 +-
 drivers/media/video/meye.c                   |   14 ++--
 drivers/media/video/pms.c                    |    2 +-
 drivers/media/video/sh_vou.c                 |   13 +++--
 drivers/media/video/sn9c102/sn9c102_core.c   |    2 +-
 drivers/media/video/v4l2-dev.c               |   81 +++++++++++++++++++++-----
 drivers/media/video/v4l2-device.c            |    1 +
 drivers/media/video/w9966.c                  |    2 +-
 include/media/v4l2-dev.h                     |    2 +-
 include/media/v4l2-device.h                  |    2 +
 34 files changed, 201 insertions(+), 165 deletions(-)
#1 lore raw

RFC PATCH v2 1/15 v4l2-dev: use mutex_lock_interruptible instead of plain mutex_lock

Where reasonable use mutex_lock_interruptible instead of mutex_lock.

---
 drivers/media/video/v4l2-dev.c |   44 +++++++++++++++++++++++++++++----------
 1 files changed, 32 insertions(+), 12 deletions(-)
drivers/media/video/v4l2-dev.c +32 -12
index 0ca7978..8eb0756 100644
@@ -191,8 +191,12 @@ static ssize_t v4l2_read(struct file *filp, char __user *buf,
 
 	if (!vdev->fops->read)
 		return -EINVAL;
-	if (vdev->lock)
-		mutex_lock(vdev->lock);
+	if (vdev->lock) {
+		int res = mutex_lock_interruptible(vdev->lock);
+
+		if (res)
+			return res;
+	}
 	if (video_is_registered(vdev))
 		ret = vdev->fops->read(filp, buf, sz, off);
 	if (vdev->lock)
@@ -208,8 +212,12 @@ static ssize_t v4l2_write(struct file *filp, const char __user *buf,
 
 	if (!vdev->fops->write)
 		return -EINVAL;
-	if (vdev->lock)
-		mutex_lock(vdev->lock);
+	if (vdev->lock) {
+		int res = mutex_lock_interruptible(vdev->lock);
+
+		if (res)
+			return res;
+	}
 	if (video_is_registered(vdev))
 		ret = vdev->fops->write(filp, buf, sz, off);
 	if (vdev->lock)
@@ -224,8 +232,8 @@ static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll)
 
 	if (!vdev->fops->poll)
 		return ret;
-	if (vdev->lock)
-		mutex_lock(vdev->lock);
+	if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+		return ret;
 	if (video_is_registered(vdev))
 		ret = vdev->fops->poll(filp, poll);
 	if (vdev->lock)
@@ -239,8 +247,12 @@ static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 	int ret = -ENODEV;
 
 	if (vdev->fops->unlocked_ioctl) {
-		if (vdev->lock)
-			mutex_lock(vdev->lock);
+		if (vdev->lock) {
+			int res = mutex_lock_interruptible(vdev->lock);
+
+			if (res)
+				return res;
+		}
 		if (video_is_registered(vdev))
 			ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
 		if (vdev->lock)
@@ -264,8 +276,12 @@ static int v4l2_mmap(struct file *filp, struct vm_area_struct *vm)
 
 	if (!vdev->fops->mmap)
 		return ret;
-	if (vdev->lock)
-		mutex_lock(vdev->lock);
+	if (vdev->lock) {
+		int res = mutex_lock_interruptible(vdev->lock);
+
+		if (res)
+			return res;
+	}
 	if (video_is_registered(vdev))
 		ret = vdev->fops->mmap(filp, vm);
 	if (vdev->lock)
@@ -291,8 +307,11 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 	video_get(vdev);
 	mutex_unlock(&videodev_lock);
 	if (vdev->fops->open) {
-		if (vdev->lock)
-			mutex_lock(vdev->lock);
+		if (vdev->lock) {
+			ret = mutex_lock_interruptible(vdev->lock);
+			if (ret)
+				goto err;
+		}
 		if (video_is_registered(vdev))
 			ret = vdev->fops->open(filp);
 		else
@@ -301,6 +320,7 @@ static int v4l2_open(struct inode *inode, struct file *filp)
 			mutex_unlock(vdev->lock);
 	}
 
+err:
 	/* decrease the refcount in case of an error */
 	if (ret)
 		video_put(vdev);
Signature · 1 line
1.7.0.4
#3 lore raw

RFC PATCH v2 2/15 BKL: trivial BKL removal from V4L2 radio drivers

In reply to Hans Verkuil

The patch converts a bunch of V4L2 radio drivers to unlocked_ioctl.

These are all simple conversions: most already had a lock and so the ioctl fop could simply be replaced by unlocked_ioctl.

radio-miropcm20.c was converted to use the new V4L2 core lock.

While doing this work I noticed that many of these drivers initialized some more fields or muted audio or something like that *after* creating the device node. This should be done before the device node is created to prevent problems. Especially hal tends to grab a device node as soon as it is created.

In one or two cases the mutex_init was even done after the device creation!

---
 drivers/media/radio/radio-aimslab.c    |   16 ++++++++--------
 drivers/media/radio/radio-aztech.c     |    6 +++---
 drivers/media/radio/radio-gemtek-pci.c |    6 +++---
 drivers/media/radio/radio-gemtek.c     |   14 +++++++-------
 drivers/media/radio/radio-maestro.c    |   14 ++++++--------
 drivers/media/radio/radio-maxiradio.c  |    2 +-
 drivers/media/radio/radio-miropcm20.c  |    6 ++++--
 drivers/media/radio/radio-rtrack2.c    |   10 +++++-----
 drivers/media/radio/radio-sf16fmi.c    |    7 ++++---
 drivers/media/radio/radio-sf16fmr2.c   |   11 +++++------
 drivers/media/radio/radio-terratec.c   |    8 ++++----
 drivers/media/radio/radio-trust.c      |   18 +++++++++---------
 drivers/media/radio/radio-zoltrix.c    |   30 +++++++++++++++---------------
 13 files changed, 74 insertions(+), 74 deletions(-)
drivers/media/radio/radio-aimslab.c +8 -8
index 5bf4985..05e832f 100644
@@ -361,7 +361,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations rtrack_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
@@ -412,13 +412,6 @@ static int __init rtrack_init(void)
 	rt->vdev.release = video_device_release_empty;
 	video_set_drvdata(&rt->vdev, rt);
 
-	if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(&rt->v4l2_dev);
-		release_region(rt->io, 2);
-		return -EINVAL;
-	}
-	v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
-
 	/* Set up the I/O locking */
 
 	mutex_init(&rt->lock);
@@ -430,6 +423,13 @@ static int __init rtrack_init(void)
 	sleep_delay(2000000);	/* make sure it's totally down	*/
 	outb(0xc0, rt->io);		/* steady volume, mute card	*/
 
+	if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(&rt->v4l2_dev);
+		release_region(rt->io, 2);
+		return -EINVAL;
+	}
+	v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
+
 	return 0;
 }
 
drivers/media/radio/radio-aztech.c +3 -3
index c223113..dd8a6ab 100644
@@ -324,7 +324,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 static const struct v4l2_file_operations aztech_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
@@ -375,6 +375,8 @@ static int __init aztech_init(void)
 	az->vdev.ioctl_ops = &aztech_ioctl_ops;
 	az->vdev.release = video_device_release_empty;
 	video_set_drvdata(&az->vdev, az);
+	/* mute card - prevents noisy bootups */
+	outb(0, az->io);
 
 	if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
@@ -383,8 +385,6 @@ static int __init aztech_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 [email protected]\n");
-	/* mute card - prevents noisy bootups */
-	outb(0, az->io);
 	return 0;
 }
 
drivers/media/radio/radio-gemtek-pci.c +3 -3
index 7903967..28fa85b 100644
@@ -361,7 +361,7 @@ MODULE_DEVICE_TABLE(pci, gemtek_pci_id);
 
 static const struct v4l2_file_operations gemtek_pci_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
@@ -422,11 +422,11 @@ static int __devinit gemtek_pci_probe(struct pci_dev *pdev, const struct pci_dev
 	card->vdev.release = video_device_release_empty;
 	video_set_drvdata(&card->vdev, card);
 
+	gemtek_pci_mute(card);
+
 	if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0)
 		goto err_video;
 
-	gemtek_pci_mute(card);
-
 	v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
 		pdev->revision, card->iobase, card->iobase + card->length - 1);
 
drivers/media/radio/radio-gemtek.c +7 -7
index 73985f6..2599364 100644
@@ -378,7 +378,7 @@ static int gemtek_probe(struct gemtek *gt)
 
 static const struct v4l2_file_operations gemtek_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static int vidioc_querycap(struct file *file, void *priv,
@@ -577,12 +577,6 @@ static int __init gemtek_init(void)
 	gt->vdev.release = video_device_release_empty;
 	video_set_drvdata(&gt->vdev, gt);
 
-	if (video_register_device(&gt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
-		release_region(gt->io, 1);
-		return -EBUSY;
-	}
-
 	/* Set defaults */
 	gt->lastfreq = GEMTEK_LOWFREQ;
 	gt->bu2614data = 0;
@@ -590,6 +584,12 @@ static int __init gemtek_init(void)
 	if (initmute)
 		gemtek_mute(gt);
 
+	if (video_register_device(&gt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(v4l2_dev);
+		release_region(gt->io, 1);
+		return -EBUSY;
+	}
+
 	return 0;
 }
 
drivers/media/radio/radio-maestro.c +6 -8
index 08f1051..6af61bf 100644
@@ -299,7 +299,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations maestro_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops maestro_ioctl_ops = {
@@ -383,22 +383,20 @@ static int __devinit maestro_probe(struct pci_dev *pdev,
 	dev->vdev.release = video_device_release_empty;
 	video_set_drvdata(&dev->vdev, dev);
 
+	if (!radio_power_on(dev)) {
+		retval = -EIO;
+		goto errfr1;
+	}
+
 	retval = video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr);
 	if (retval) {
 		v4l2_err(v4l2_dev, "can't register video device!\n");
 		goto errfr1;
 	}
 
-	if (!radio_power_on(dev)) {
-		retval = -EIO;
-		goto errunr;
-	}
-
 	v4l2_info(v4l2_dev, "version " DRIVER_VERSION "\n");
 
 	return 0;
-errunr:
-	video_unregister_device(&dev->vdev);
 errfr1:
 	v4l2_device_unregister(v4l2_dev);
 errfr:
drivers/media/radio/radio-maxiradio.c +1 -1
index 255d40d..6459a22 100644
@@ -346,7 +346,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 static const struct v4l2_file_operations maxiradio_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
drivers/media/radio/radio-miropcm20.c +4 -2
index 4ff8854..3fb76e3 100644
@@ -33,6 +33,7 @@ struct pcm20 {
 	unsigned long freq;
 	int muted;
 	struct snd_miro_aci *aci;
+	struct mutex lock;
 };
 
 static struct pcm20 pcm20_card = {
@@ -72,7 +73,7 @@ static int pcm20_setfreq(struct pcm20 *dev, unsigned long freq)
 
 static const struct v4l2_file_operations pcm20_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static int vidioc_querycap(struct file *file, void *priv,
@@ -229,7 +230,7 @@ static int __init pcm20_init(void)
 		return -ENODEV;
 	}
 	strlcpy(v4l2_dev->name, "miropcm20", sizeof(v4l2_dev->name));
-
+	mutex_init(&dev->lock);
 
 	res = v4l2_device_register(NULL, v4l2_dev);
 	if (res < 0) {
@@ -242,6 +243,7 @@ static int __init pcm20_init(void)
 	dev->vdev.fops = &pcm20_fops;
 	dev->vdev.ioctl_ops = &pcm20_ioctl_ops;
 	dev->vdev.release = video_device_release_empty;
+	dev->vdev.lock = &dev->lock;
 	video_set_drvdata(&dev->vdev, dev);
 
 	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0)
drivers/media/radio/radio-rtrack2.c +5 -5
index a79296a..8d6ea59 100644
@@ -266,7 +266,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations rtrack2_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = {
@@ -315,6 +315,10 @@ static int __init rtrack2_init(void)
 	dev->vdev.release = video_device_release_empty;
 	video_set_drvdata(&dev->vdev, dev);
 
+	/* mute card - prevents noisy bootups */
+	outb(1, dev->io);
+	dev->muted = 1;
+
 	mutex_init(&dev->lock);
 	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
@@ -324,10 +328,6 @@ static int __init rtrack2_init(void)
 
 	v4l2_info(v4l2_dev, "AIMSlab Radiotrack II card driver.\n");
 
-	/* mute card - prevents noisy bootups */
-	outb(1, dev->io);
-	dev->muted = 1;
-
 	return 0;
 }
 
drivers/media/radio/radio-sf16fmi.c +4 -3
index 985359d..b5a5f89 100644
@@ -260,7 +260,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations fmi_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
@@ -382,6 +382,9 @@ static int __init fmi_init(void)
 
 	mutex_init(&fmi->lock);
 
+	/* mute card - prevents noisy bootups */
+	fmi_mute(fmi);
+
 	if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
 		release_region(fmi->io, 2);
@@ -391,8 +394,6 @@ static int __init fmi_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
-	/* mute card - prevents noisy bootups */
-	fmi_mute(fmi);
 	return 0;
 }
 
drivers/media/radio/radio-sf16fmr2.c +5 -6
index 52c7bbb..dc3f04c 100644
@@ -376,7 +376,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations fmr2_fops = {
 	.owner          = THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
@@ -424,6 +424,10 @@ static int __init fmr2_init(void)
 	fmr2->vdev.release = video_device_release_empty;
 	video_set_drvdata(&fmr2->vdev, fmr2);
 
+	/* mute card - prevents noisy bootups */
+	fmr2_mute(fmr2->io);
+	fmr2_product_info(fmr2);
+
 	if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(v4l2_dev);
 		release_region(fmr2->io, 2);
@@ -431,11 +435,6 @@ static int __init fmr2_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
-	/* mute card - prevents noisy bootups */
-	mutex_lock(&fmr2->lock);
-	fmr2_mute(fmr2->io);
-	fmr2_product_info(fmr2);
-	mutex_unlock(&fmr2->lock);
 	debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
 	return 0;
 }
drivers/media/radio/radio-terratec.c +4 -4
index fc1c860..a326639 100644
@@ -338,7 +338,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations terratec_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops terratec_ioctl_ops = {
@@ -389,6 +389,9 @@ static int __init terratec_init(void)
 
 	mutex_init(&tt->lock);
 
+	/* mute card - prevents noisy bootups */
+	tt_write_vol(tt, 0);
+
 	if (video_register_device(&tt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(&tt->v4l2_dev);
 		release_region(tt->io, 2);
@@ -396,9 +399,6 @@ static int __init terratec_init(void)
 	}
 
 	v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver.\n");
-
-	/* mute card - prevents noisy bootups */
-	tt_write_vol(tt, 0);
 	return 0;
 }
 
drivers/media/radio/radio-trust.c +9 -9
index 9d6dcf8..22fa9cc 100644
@@ -344,7 +344,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 
 static const struct v4l2_file_operations trust_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops trust_ioctl_ops = {
@@ -396,14 +396,6 @@ static int __init trust_init(void)
 	tr->vdev.release = video_device_release_empty;
 	video_set_drvdata(&tr->vdev, tr);
 
-	if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
-		release_region(tr->io, 2);
-		return -EINVAL;
-	}
-
-	v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
-
 	write_i2c(tr, 2, TDA7318_ADDR, 0x80);	/* speaker att. LF = 0 dB */
 	write_i2c(tr, 2, TDA7318_ADDR, 0xa0);	/* speaker att. RF = 0 dB */
 	write_i2c(tr, 2, TDA7318_ADDR, 0xc0);	/* speaker att. LR = 0 dB */
@@ -418,6 +410,14 @@ static int __init trust_init(void)
 	/* mute card - prevents noisy bootups */
 	tr_setmute(tr, 1);
 
+	if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(v4l2_dev);
+		release_region(tr->io, 2);
+		return -EINVAL;
+	}
+
+	v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
+
 	return 0;
 }
 
drivers/media/radio/radio-zoltrix.c +15 -15
index f31eab9..af99c5b 100644
@@ -377,7 +377,7 @@ static int vidioc_s_audio(struct file *file, void *priv,
 static const struct v4l2_file_operations zoltrix_fops =
 {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = {
@@ -424,20 +424,6 @@ static int __init zoltrix_init(void)
 		return res;
 	}
 
-	strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
-	zol->vdev.v4l2_dev = v4l2_dev;
-	zol->vdev.fops = &zoltrix_fops;
-	zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
-	zol->vdev.release = video_device_release_empty;
-	video_set_drvdata(&zol->vdev, zol);
-
-	if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
-		v4l2_device_unregister(v4l2_dev);
-		release_region(zol->io, 2);
-		return -EINVAL;
-	}
-	v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
-
 	mutex_init(&zol->lock);
 
 	/* mute card - prevents noisy bootups */
@@ -452,6 +438,20 @@ static int __init zoltrix_init(void)
 	zol->curvol = 0;
 	zol->stereo = 1;
 
+	strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
+	zol->vdev.v4l2_dev = v4l2_dev;
+	zol->vdev.fops = &zoltrix_fops;
+	zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
+	zol->vdev.release = video_device_release_empty;
+	video_set_drvdata(&zol->vdev, zol);
+
+	if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+		v4l2_device_unregister(v4l2_dev);
+		release_region(zol->io, 2);
+		return -EINVAL;
+	}
+	v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
+
 	return 0;
 }
 
Signature · 1 line
1.7.0.4
#4 lore raw

RFC PATCH v2 3/15 cadet: use unlocked_ioctl

In reply to Hans Verkuil

Converted from ioctl to unlocked_ioctl.

This driver already used an internal lock, but it was missing in cadet_open and cadet_release and it was not used correctly in cadet_read.

---
 drivers/media/radio/radio-cadet.c |   12 +++++++++---
 1 files changed, 9 insertions(+), 3 deletions(-)
drivers/media/radio/radio-cadet.c +9 -3
index b701ea6..bc9ad08 100644
@@ -328,11 +328,10 @@ static ssize_t cadet_read(struct file *file, char __user *data, size_t count, lo
 	unsigned char readbuf[RDS_BUFFER];
 	int i = 0;
 
+	mutex_lock(&dev->lock);
 	if (dev->rdsstat == 0) {
-		mutex_lock(&dev->lock);
 		dev->rdsstat = 1;
 		outb(0x80, dev->io);        /* Select RDS fifo */
-		mutex_unlock(&dev->lock);
 		init_timer(&dev->readtimer);
 		dev->readtimer.function = cadet_handler;
 		dev->readtimer.data = (unsigned long)dev;
@@ -340,12 +339,15 @@ static ssize_t cadet_read(struct file *file, char __user *data, size_t count, lo
 		add_timer(&dev->readtimer);
 	}
 	if (dev->rdsin == dev->rdsout) {
+		mutex_unlock(&dev->lock);
 		if (file->f_flags & O_NONBLOCK)
 			return -EWOULDBLOCK;
 		interruptible_sleep_on(&dev->read_queue);
+		mutex_lock(&dev->lock);
 	}
 	while (i < count && dev->rdsin != dev->rdsout)
 		readbuf[i++] = dev->rdsbuf[dev->rdsout++];
+	mutex_unlock(&dev->lock);
 
 	if (copy_to_user(data, readbuf, i))
 		return -EFAULT;
@@ -525,9 +527,11 @@ static int cadet_open(struct file *file)
 {
 	struct cadet *dev = video_drvdata(file);
 
+	mutex_lock(&dev->lock);
 	dev->users++;
 	if (1 == dev->users)
 		init_waitqueue_head(&dev->read_queue);
+	mutex_unlock(&dev->lock);
 	return 0;
 }
 
@@ -535,11 +539,13 @@ static int cadet_release(struct file *file)
 {
 	struct cadet *dev = video_drvdata(file);
 
+	mutex_lock(&dev->lock);
 	dev->users--;
 	if (0 == dev->users) {
 		del_timer_sync(&dev->readtimer);
 		dev->rdsstat = 0;
 	}
+	mutex_unlock(&dev->lock);
 	return 0;
 }
 
@@ -559,7 +565,7 @@ static const struct v4l2_file_operations cadet_fops = {
 	.open		= cadet_open,
 	.release       	= cadet_release,
 	.read		= cadet_read,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.poll		= cadet_poll,
 };
 
Signature · 1 line
1.7.0.4
#5 lore raw

RFC PATCH v2 4/15 tea5764: convert to unlocked_ioctl

In reply to Hans Verkuil

Convert from ioctl to unlocked_ioctl using the v4l2 core lock.

Also removed the 'exclusive access' limitation. There was no need for it and it violates the v4l2 spec as well.

---
 drivers/media/radio/radio-tea5764.c |   49 ++++++----------------------------
 1 files changed, 9 insertions(+), 40 deletions(-)
drivers/media/radio/radio-tea5764.c +9 -40
index 789d2ec..0e71d81 100644
@@ -142,7 +142,6 @@ struct tea5764_device {
 	struct video_device		*videodev;
 	struct tea5764_regs		regs;
 	struct mutex			mutex;
-	int				users;
 };
 
 /* I2C code related */
@@ -458,41 +457,10 @@ static int vidioc_s_audio(struct file *file, void *priv,
 	return 0;
 }
 
-static int tea5764_open(struct file *file)
-{
-	/* Currently we support only one device */
-	struct tea5764_device *radio = video_drvdata(file);
-
-	mutex_lock(&radio->mutex);
-	/* Only exclusive access */
-	if (radio->users) {
-		mutex_unlock(&radio->mutex);
-		return -EBUSY;
-	}
-	radio->users++;
-	mutex_unlock(&radio->mutex);
-	file->private_data = radio;
-	return 0;
-}
-
-static int tea5764_close(struct file *file)
-{
-	struct tea5764_device *radio = video_drvdata(file);
-
-	if (!radio)
-		return -ENODEV;
-	mutex_lock(&radio->mutex);
-	radio->users--;
-	mutex_unlock(&radio->mutex);
-	return 0;
-}
-
 /* File system interface */
 static const struct v4l2_file_operations tea5764_fops = {
 	.owner		= THIS_MODULE,
-	.open           = tea5764_open,
-	.release        = tea5764_close,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
@@ -527,7 +495,7 @@ static int __devinit tea5764_i2c_probe(struct i2c_client *client,
 	int ret;
 
 	PDEBUG("probe");
-	radio = kmalloc(sizeof(struct tea5764_device), GFP_KERNEL);
+	radio = kzalloc(sizeof(struct tea5764_device), GFP_KERNEL);
 	if (!radio)
 		return -ENOMEM;
 
@@ -555,12 +523,7 @@ static int __devinit tea5764_i2c_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, radio);
 	video_set_drvdata(radio->videodev, radio);
-
-	ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
-	if (ret < 0) {
-		PWARN("Could not register video device!");
-		goto errrel;
-	}
+	radio->videodev->lock = &radio->mutex;
 
 	/* initialize and power off the chip */
 	tea5764_i2c_read(radio);
@@ -568,6 +531,12 @@ static int __devinit tea5764_i2c_probe(struct i2c_client *client,
 	tea5764_mute(radio, 1);
 	tea5764_power_down(radio);
 
+	ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+	if (ret < 0) {
+		PWARN("Could not register video device!");
+		goto errrel;
+	}
+
 	PINFO("registered.");
 	return 0;
 errrel:
Signature · 1 line
1.7.0.4
#6 lore raw

RFC PATCH v2 5/15 si4713: convert to unlocked_ioctl

In reply to Hans Verkuil

Convert ioctl to unlocked_ioctl. Note that for this driver the locking is done inside the sub-device.

---
 drivers/media/radio/radio-si4713.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)
drivers/media/radio/radio-si4713.c +2 -1
index 6a43578..3a84c3d 100644
@@ -53,7 +53,8 @@ struct radio_si4713_device {
 /* radio_si4713_fops - file operations interface */
 static const struct v4l2_file_operations radio_si4713_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	/* Note: locking is done at the subdev level in the i2c driver. */
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 /* Video4Linux Interface */
Signature · 1 line
1.7.0.4
#7 lore raw

RFC PATCH v2 6/15 typhoon: convert to unlocked_ioctl.

In reply to Hans Verkuil

Convert the typhoon driver from ioctl to unlocked_ioctl.

When doing this I noticed a bug where curfreq was not initialized correctly to mutefreq (it wasn't multiplied by 16).

The initialization is now also done before the device node is created.

---
 drivers/media/radio/radio-typhoon.c |   16 ++++++++--------
 1 files changed, 8 insertions(+), 8 deletions(-)
drivers/media/radio/radio-typhoon.c +8 -8
index b1f6305..8dbbf08 100644
@@ -317,7 +317,7 @@ static int vidioc_log_status(struct file *file, void *priv)
 
 static const struct v4l2_file_operations typhoon_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
@@ -344,18 +344,18 @@ static int __init typhoon_init(void)
 
 	strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
 	dev->io = io;
-	dev->curfreq = dev->mutefreq = mutefreq;
 
 	if (dev->io == -1) {
 		v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
 		return -EINVAL;
 	}
 
-	if (dev->mutefreq < 87000 || dev->mutefreq > 108500) {
+	if (mutefreq < 87000 || mutefreq > 108500) {
 		v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
 		v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
 		return -EINVAL;
 	}
+	dev->curfreq = dev->mutefreq = mutefreq << 4;
 
 	mutex_init(&dev->lock);
 	if (!request_region(dev->io, 8, "typhoon")) {
@@ -378,17 +378,17 @@ static int __init typhoon_init(void)
 	dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
 	dev->vdev.release = video_device_release_empty;
 	video_set_drvdata(&dev->vdev, dev);
+
+	/* mute card - prevents noisy bootups */
+	typhoon_mute(dev);
+
 	if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
 		v4l2_device_unregister(&dev->v4l2_dev);
 		release_region(dev->io, 8);
 		return -EINVAL;
 	}
 	v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
-	v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", dev->mutefreq);
-	dev->mutefreq <<= 4;
-
-	/* mute card - prevents noisy bootups */
-	typhoon_mute(dev);
+	v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq);
 
 	return 0;
 }
Signature · 1 line
1.7.0.4
#8 lore raw

RFC PATCH v2 7/15 dsbr100: convert to unlocked_ioctl.

In reply to Hans Verkuil

Trivial conversion to unlocked_ioctl.

---
 drivers/media/radio/dsbr100.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/radio/dsbr100.c +1 -1
index ed9cd7a..c3e952f 100644
@@ -605,7 +605,7 @@ static void usb_dsbr100_video_device_release(struct video_device *videodev)
 /* File system interface */
 static const struct v4l2_file_operations usb_dsbr100_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops usb_dsbr100_ioctl_ops = {
Signature · 1 line
1.7.0.4
#10 lore raw

Re: [RFCv2 PATCH 07/15] dsbr100: convert to unlocked_ioctl.

Quoted 5 lines

This driver has quite a few locking issues that would only be made worse by your patch. A much better patch for this can be found here:

http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9af46902c5f3d4d4cc80227d3f7c

Much too big for 2.6.37. I'll just drop this patch from my patch series. Instead it will rely on the new lock in v4l2_device (BKL replacement) that serializes all ioctls. For 2.6.38 we can convert it to core assisted locking which is much easier.

Regards,

Hans

Signature · 1 line
Hans Verkuil - video4linux developer - sponsored by Cisco
#11 lore raw

Re: [RFCv2 PATCH 07/15] dsbr100: convert to unlocked_ioctl.

Quoted 11 lines · Hans Verkuil
Quoted 5 lines

This driver has quite a few locking issues that would only be made worse by your patch. A much better patch for this can be found here:

http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9af46902c5f3d4d4cc80227d3f7c

Much too big for 2.6.37. I'll just drop this patch from my patch series. Instead it will rely on the new lock in v4l2_device (BKL replacement) that serializes all ioctls. For 2.6.38 we can convert it to core assisted locking which is much easier.

I don't see how this patch is really any bigger than some of the others in your series. Sure there are a lot of deletions, but the number of additions is quite small. There are much worse ways all the locking issues in this driver could have been corrected. This patch manages to do just that while reducing the overall size of the driver at the same time.

Regards,

David Ellingsworth

#12 lore raw

Re: [RFCv2 PATCH 07/15] dsbr100: convert to unlocked_ioctl.

Quoted 15 lines · Hans Verkuil
Quoted 4 lines
Quoted 4 lines

This driver has quite a few locking issues that would only be made worse by your patch. A much better patch for this can be found here:

Quoted 8 lines
Quoted 1 line

http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9af46902c5f3d4d4cc80227d3f7c

Much too big for 2.6.37. I'll just drop this patch from my patch series. Instead it will rely on the new lock in v4l2_device (BKL replacement) that
serializes all ioctls. For 2.6.38 we can convert it to core assisted locking which is much easier.

Quoted 6 lines

I don't see how this patch is really any bigger than some of the others in your series. Sure there are a lot of deletions, but the number of additions is quite small. There are much worse ways all the locking issues in this driver could have been corrected. This patch manages to do just that while reducing the overall size of the driver at the same time.

Basically there are two reasons why I'm not including this in my patch
series: 1) you disagreed with my patch and 2) I disagree with your patch.

In this case the patch for 2.6.37 should either be small and trivial, or we should postpone it to 2.6.38 and use proper core-assisted locking (which makes the most sense for this driver in my opinion). And I really dislike those BUG_ONs you've added, to be honest. Sorry about that...

Anyway, feel free to post your own patch for this driver. I've no problems with that at all. It is clear that this driver takes more time to get a proper patch for that makes everyone happy, and I really need to make the git pull request for 2.6.37 tomorrow as we don't want to do this too late in the 2.6.37 cycle.

Regards,

Hans

Signature · 1 line
Hans Verkuil - video4linux developer - sponsored by Cisco
#13 lore raw

Re: [RFCv2 PATCH 07/15] dsbr100: convert to unlocked_ioctl.

Quoted 22 lines · Hans Verkuil
Quoted 15 lines · Hans Verkuil
Quoted 4 lines
Quoted 4 lines

This driver has quite a few locking issues that would only be made worse by your patch. A much better patch for this can be found here:

Quoted 8 lines
Quoted 1 line

http://desource.dyndns.org/~atog/gitweb?p=linux-media.git;a=commitdiff;h=9c5d8ebb602e9af46902c5f3d4d4cc80227d3f7c

Much too big for 2.6.37. I'll just drop this patch from my patch series. Instead it will rely on the new lock in v4l2_device (BKL replacement) that
serializes all ioctls. For 2.6.38 we can convert it to core assisted locking which is much easier.

Quoted 6 lines

I don't see how this patch is really any bigger than some of the others in your series. Sure there are a lot of deletions, but the number of additions is quite small. There are much worse ways all the locking issues in this driver could have been corrected. This patch manages to do just that while reducing the overall size of the driver at the same time.

Quoted 7 lines

Basically there are two reasons why I'm not including this in my patch
series: 1) you disagreed with my patch and 2) I disagree with your patch.

In this case the patch for 2.6.37 should either be small and trivial, or we should postpone it to 2.6.38 and use proper core-assisted locking (which makes the most sense for this driver in my opinion). And I really dislike those BUG_ONs you've added, to be honest. Sorry about that...

The reality is that the BUG_ONs should never be hit. I added those because I don't have the hardware needed to test my changes. So if I missed something, the issue would be very apparent to whoever was doing the testing. If someone would actually test this series, the BUG_ONs could be removed. Maybe a WARN_ON would have been better, but to me accessing the device struct without holding the lock is a bug. The only valid case where it would be okay to do that would be from within the probe function before the device is registered.

Quoted 7 lines

Anyway, feel free to post your own patch for this driver. I've no problems with that at all. It is clear that this driver takes more time to get a proper patch for that makes everyone happy, and I really need to make the git pull request for 2.6.37 tomorrow as we don't want to do this too late in the 2.6.37 cycle.

I understand, but if you or anyone else had actually bothered to review this patch when it was submitted back in May then it might have made its way into the kernel by now. At the time the patch was written, core assisted locking wasn't even implemented. Granted the ioctl added to correct the locking might cause a cache miss, but this is acceptable for such a simple driver. This is a good first step towards core assisted locking.

Regards,

David Ellingsworth

#14 lore raw

RFC PATCH v2 8/15 BKL: trivial ioctl -> unlocked_ioctl video driver conversions

In reply to Hans Verkuil

These drivers could be trivially converted to unlocked_ioctl since they already did locking.

---
 drivers/media/video/arv.c     |    2 +-
 drivers/media/video/bw-qcam.c |    2 +-
 drivers/media/video/c-qcam.c  |    2 +-
 drivers/media/video/meye.c    |   14 +++++++-------
 drivers/media/video/pms.c     |    2 +-
 drivers/media/video/w9966.c   |    2 +-
 6 files changed, 12 insertions(+), 12 deletions(-)
drivers/media/video/arv.c +1 -1
index 31e7a12..f989f28 100644
@@ -712,7 +712,7 @@ static int ar_initialize(struct ar *ar)
 static const struct v4l2_file_operations ar_fops = {
 	.owner		= THIS_MODULE,
 	.read		= ar_read,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops ar_ioctl_ops = {
drivers/media/video/bw-qcam.c +1 -1
index 935e0c9..c119350 100644
@@ -860,7 +860,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 
 static const struct v4l2_file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 	.read		= qcam_read,
 };
 
drivers/media/video/c-qcam.c +1 -1
index 6e4b196..24fc009 100644
@@ -718,7 +718,7 @@ static ssize_t qcam_read(struct file *file, char __user *buf,
 
 static const struct v4l2_file_operations qcam_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.read		= qcam_read,
 };
 
drivers/media/video/meye.c +7 -7
index 2be23bc..48d2c24 100644
@@ -1659,7 +1659,7 @@ static const struct v4l2_file_operations meye_fops = {
 	.open		= meye_open,
 	.release	= meye_release,
 	.mmap		= meye_mmap,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.poll		= meye_poll,
 };
 
@@ -1831,12 +1831,6 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	msleep(1);
 	mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK);
 
-	if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
-				  video_nr) < 0) {
-		v4l2_err(v4l2_dev, "video_register_device failed\n");
-		goto outvideoreg;
-	}
-
 	mutex_init(&meye.lock);
 	init_waitqueue_head(&meye.proc_list);
 	meye.brightness = 32 << 10;
@@ -1858,6 +1852,12 @@ static int __devinit meye_probe(struct pci_dev *pcidev,
 	sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0);
 	sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48);
 
+	if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
+				  video_nr) < 0) {
+		v4l2_err(v4l2_dev, "video_register_device failed\n");
+		goto outvideoreg;
+	}
+
 	v4l2_info(v4l2_dev, "Motion Eye Camera Driver v%s.\n",
 	       MEYE_DRIVER_VERSION);
 	v4l2_info(v4l2_dev, "mchip KL5A72002 rev. %d, base %lx, irq %d\n",
drivers/media/video/pms.c +1 -1
index 7129b50..7551907 100644
@@ -932,7 +932,7 @@ static ssize_t pms_read(struct file *file, char __user *buf,
 
 static const struct v4l2_file_operations pms_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.read           = pms_read,
 };
 
drivers/media/video/w9966.c +1 -1
index 635420d..019ee20 100644
@@ -815,7 +815,7 @@ out:
 
 static const struct v4l2_file_operations w9966_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl          = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 	.read           = w9966_v4l_read,
 };
 
Signature · 1 line
1.7.0.4
#15 lore raw

RFC PATCH v2 9/15 sn9c102: convert to unlocked_ioctl.

In reply to Hans Verkuil

Trivial conversion, this driver used a mutex already.

---
 drivers/media/video/sn9c102/sn9c102_core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/sn9c102/sn9c102_core.c +1 -1
index 28e19da..f49fbfb 100644
@@ -3238,7 +3238,7 @@ static const struct v4l2_file_operations sn9c102_fops = {
 	.owner = THIS_MODULE,
 	.open = sn9c102_open,
 	.release = sn9c102_release,
-	.ioctl = sn9c102_ioctl,
+	.unlocked_ioctl = sn9c102_ioctl,
 	.read = sn9c102_read,
 	.poll = sn9c102_poll,
 	.mmap = sn9c102_mmap,
Signature · 1 line
1.7.0.4
#16 lore raw

RFC PATCH v2 10/15 et61x251_core: trivial conversion to unlocked_ioctl.

In reply to Hans Verkuil
---
 drivers/media/video/et61x251/et61x251_core.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/et61x251/et61x251_core.c +1 -1
index a5cfc76..bb16409 100644
@@ -2530,7 +2530,7 @@ static const struct v4l2_file_operations et61x251_fops = {
 	.owner = THIS_MODULE,
 	.open =    et61x251_open,
 	.release = et61x251_release,
-	.ioctl =   et61x251_ioctl,
+	.unlocked_ioctl =   et61x251_ioctl,
 	.read =    et61x251_read,
 	.poll =    et61x251_poll,
 	.mmap =    et61x251_mmap,
Signature · 1 line
1.7.0.4
#17 lore raw

RFC PATCH v2 11/15 cafe_ccic: replace ioctl by unlocked_ioctl.

In reply to Hans Verkuil

Trivial change, approved by Jonathan Corbet <[email protected]>.

---
 drivers/media/video/cafe_ccic.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/cafe_ccic.c +1 -1
index d147525..f85c933 100644
@@ -1773,7 +1773,7 @@ static const struct v4l2_file_operations cafe_v4l_fops = {
 	.read = cafe_v4l_read,
 	.poll = cafe_v4l_poll,
 	.mmap = cafe_v4l_mmap,
-	.ioctl = video_ioctl2,
+	.unlocked_ioctl = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
Signature · 1 line
1.7.0.4
#18 lore raw

RFC PATCH v2 12/15 sh_vou: convert to unlocked_ioctl.

In reply to Hans Verkuil
---
 drivers/media/video/sh_vou.c |   13 ++++++++-----
 1 files changed, 8 insertions(+), 5 deletions(-)
drivers/media/video/sh_vou.c +8 -5
index 0f49061..858b2f8 100644
@@ -75,6 +75,7 @@ struct sh_vou_device {
 	int pix_idx;
 	struct videobuf_buffer *active;
 	enum sh_vou_status status;
+	struct mutex fop_lock;
 };
 
 struct sh_vou_file {
@@ -235,7 +236,7 @@ static void free_buffer(struct videobuf_queue *vq, struct videobuf_buffer *vb)
 	vb->state = VIDEOBUF_NEEDS_INIT;
 }
 
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
 static int sh_vou_buf_setup(struct videobuf_queue *vq, unsigned int *count,
 			    unsigned int *size)
 {
@@ -257,7 +258,7 @@ static int sh_vou_buf_setup(struct videobuf_queue *vq, unsigned int *count,
 	return 0;
 }
 
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
 static int sh_vou_buf_prepare(struct videobuf_queue *vq,
 			      struct videobuf_buffer *vb,
 			      enum v4l2_field field)
@@ -306,7 +307,7 @@ static int sh_vou_buf_prepare(struct videobuf_queue *vq,
 	return 0;
 }
 
-/* Locking: caller holds vq->vb_lock mutex and vq->irqlock spinlock */
+/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
 static void sh_vou_buf_queue(struct videobuf_queue *vq,
 			     struct videobuf_buffer *vb)
 {
@@ -1190,7 +1191,7 @@ static int sh_vou_open(struct file *file)
 				       V4L2_BUF_TYPE_VIDEO_OUTPUT,
 				       V4L2_FIELD_NONE,
 				       sizeof(struct videobuf_buffer), vdev,
-				       NULL);
+				       &vou_dev->fop_lock);
 
 	return 0;
 }
@@ -1292,7 +1293,7 @@ static const struct v4l2_file_operations sh_vou_fops = {
 	.owner		= THIS_MODULE,
 	.open		= sh_vou_open,
 	.release	= sh_vou_release,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 	.mmap		= sh_vou_mmap,
 	.poll		= sh_vou_poll,
 };
@@ -1331,6 +1332,7 @@ static int __devinit sh_vou_probe(struct platform_device *pdev)
 
 	INIT_LIST_HEAD(&vou_dev->queue);
 	spin_lock_init(&vou_dev->lock);
+	mutex_init(&vou_dev->fop_lock);
 	atomic_set(&vou_dev->use_count, 0);
 	vou_dev->pdata = vou_pdata;
 	vou_dev->status = SH_VOU_IDLE;
@@ -1388,6 +1390,7 @@ static int __devinit sh_vou_probe(struct platform_device *pdev)
 		vdev->tvnorms |= V4L2_STD_PAL;
 	vdev->v4l2_dev = &vou_dev->v4l2_dev;
 	vdev->release = video_device_release;
+	vdev->lock = &vou_dev->fop_lock;
 
 	vou_dev->vdev = vdev;
 	video_set_drvdata(vdev, vou_dev);
Signature · 1 line
1.7.0.4
#19 lore raw

RFC PATCH v2 13/15 radio-timb: convert to unlocked_ioctl.

In reply to Hans Verkuil
---
 drivers/media/radio/radio-timb.c |    5 ++++-
 1 files changed, 4 insertions(+), 1 deletions(-)
drivers/media/radio/radio-timb.c +4 -1
index b8bb3ef..a185610 100644
@@ -34,6 +34,7 @@ struct timbradio {
 	struct v4l2_subdev	*sd_dsp;
 	struct video_device	video_dev;
 	struct v4l2_device	v4l2_dev;
+	struct mutex		lock;
 };
 
 
@@ -142,7 +143,7 @@ static const struct v4l2_ioctl_ops timbradio_ioctl_ops = {
 
 static const struct v4l2_file_operations timbradio_fops = {
 	.owner		= THIS_MODULE,
-	.ioctl		= video_ioctl2,
+	.unlocked_ioctl	= video_ioctl2,
 };
 
 static int __devinit timbradio_probe(struct platform_device *pdev)
@@ -164,6 +165,7 @@ static int __devinit timbradio_probe(struct platform_device *pdev)
 	}
 
 	tr->pdata = *pdata;
+	mutex_init(&tr->lock);
 
 	strlcpy(tr->video_dev.name, "Timberdale Radio",
 		sizeof(tr->video_dev.name));
@@ -171,6 +173,7 @@ static int __devinit timbradio_probe(struct platform_device *pdev)
 	tr->video_dev.ioctl_ops = &timbradio_ioctl_ops;
 	tr->video_dev.release = video_device_release_empty;
 	tr->video_dev.minor = -1;
+	tr->video_dev.lock = &tr->lock;
 
 	strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
 	err = v4l2_device_register(NULL, &tr->v4l2_dev);
Signature · 1 line
1.7.0.4
#20 lore raw

RFC PATCH v2 14/15 V4L: improve the BKL replacement heuristic

In reply to Hans Verkuil

The BKL replacement mutex had some serious performance side-effects on V4L drivers. It is replaced by a better heuristic that works around the worst of the side-effects.

Read the v4l2-dev.c comments for the whole sorry story. This is a temporary measure only until we can convert all v4l drivers to use unlocked_ioctl.

---
 drivers/media/video/v4l2-dev.c    |   37 ++++++++++++++++++++++++++++++++++---
 drivers/media/video/v4l2-device.c |    1 +
 include/media/v4l2-dev.h          |    2 +-
 include/media/v4l2-device.h       |    2 ++
 4 files changed, 38 insertions(+), 4 deletions(-)
drivers/media/video/v4l2-dev.c +34 -3
index 8eb0756..59ef642 100644
@@ -258,11 +258,42 @@ static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		if (vdev->lock)
 			mutex_unlock(vdev->lock);
 	} else if (vdev->fops->ioctl) {
-		/* TODO: convert all drivers to unlocked_ioctl */
-		lock_kernel();
+		/* This code path is a replacement for the BKL. It is a major
+		 * hack but it will have to do for those drivers that are not
+		 * yet converted to use unlocked_ioctl.
+		 *
+		 * There are two options: if the driver implements struct
+		 * v4l2_device, then the lock defined there is used to
+		 * serialize the ioctls. Otherwise the v4l2 core lock defined
+		 * below is used. This lock is really bad since it serializes
+		 * completely independent devices.
+		 *
+		 * Both variants suffer from the same problem: if the driver
+		 * sleeps, then it blocks all ioctls since the lock is still
+		 * held. This is very common for VIDIOC_DQBUF since that
+		 * normally waits for a frame to arrive. As a result any other
+		 * ioctl calls will proceed very, very slowly since each call
+		 * will have to wait for the VIDIOC_QBUF to finish. Things that
+		 * should take 0.01s may now take 10-20 seconds.
+		 *
+		 * The workaround is to *not* take the lock for VIDIOC_DQBUF.
+		 * This actually works OK for videobuf-based drivers, since
+		 * videobuf will take its own internal lock.
+		 */
+		static DEFINE_MUTEX(v4l2_ioctl_mutex);
+		struct mutex *m = vdev->v4l2_dev ?
+			&vdev->v4l2_dev->ioctl_lock : &v4l2_ioctl_mutex;
+
+		if (cmd != VIDIOC_DQBUF) {
+			int res = mutex_lock_interruptible(m);
+
+			if (res)
+				return res;
+		}
 		if (video_is_registered(vdev))
 			ret = vdev->fops->ioctl(filp, cmd, arg);
-		unlock_kernel();
+		if (cmd != VIDIOC_DQBUF)
+			mutex_unlock(m);
 	} else
 		ret = -ENOTTY;
 
drivers/media/video/v4l2-device.c +1 -0
index 0b08f96..7fe6f92 100644
@@ -35,6 +35,7 @@ int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
 
 	INIT_LIST_HEAD(&v4l2_dev->subdevs);
 	spin_lock_init(&v4l2_dev->lock);
+	mutex_init(&v4l2_dev->ioctl_lock);
 	v4l2_dev->dev = dev;
 	if (dev == NULL) {
 		/* If dev == NULL, then name must be filled in by the caller */
include/media/v4l2-dev.h +1 -1
index 15802a0..59dec5a 100644
@@ -39,7 +39,7 @@ struct v4l2_file_operations {
 	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
 	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
-	long (*ioctl) (struct file *, unsigned int, unsigned long);
+	long (*ioctl __deprecated) (struct file *, unsigned int, unsigned long);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
 	int (*open) (struct file *);
include/media/v4l2-device.h +2 -0
index 6648036..b16f307 100644
@@ -51,6 +51,8 @@ struct v4l2_device {
 			unsigned int notification, void *arg);
 	/* The control handler. May be NULL. */
 	struct v4l2_ctrl_handler *ctrl_handler;
+	/* BKL replacement mutex. Temporary solution only. */
+	struct mutex ioctl_lock;
 };
 
 /* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
Signature · 1 line
1.7.0.4
Acked-by on v2 14/15
#21 lore raw

Re: [RFCv2 PATCH 14/15] V4L: improve the BKL replacement heuristic

Quoted 9 lines · On Tuesday 16 November 2010 22:56:45 Hans Verkuil wrote:

The BKL replacement mutex had some serious performance side-effects on V4L drivers. It is replaced by a better heuristic that works around the worst of the side-effects.

Read the v4l2-dev.c comments for the whole sorry story. This is a temporary measure only until we can convert all v4l drivers to use unlocked_ioctl.

Quoted 96 lines
---
 drivers/media/video/v4l2-dev.c    |   37 ++++++++++++++++++++++++++++++++++---
 drivers/media/video/v4l2-device.c |    1 +
 include/media/v4l2-dev.h          |    2 +-
 include/media/v4l2-device.h       |    2 ++
 4 files changed, 38 insertions(+), 4 deletions(-)
drivers/media/video/v4l2-dev.c +34 -3
index 8eb0756..59ef642 100644
@@ -258,11 +258,42 @@ static long v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
 		if (vdev->lock)
 			mutex_unlock(vdev->lock);
 	} else if (vdev->fops->ioctl) {
-		/* TODO: convert all drivers to unlocked_ioctl */
-		lock_kernel();
+		/* This code path is a replacement for the BKL. It is a major
+		 * hack but it will have to do for those drivers that are not
+		 * yet converted to use unlocked_ioctl.
+		 *
+		 * There are two options: if the driver implements struct
+		 * v4l2_device, then the lock defined there is used to
+		 * serialize the ioctls. Otherwise the v4l2 core lock defined
+		 * below is used. This lock is really bad since it serializes
+		 * completely independent devices.
+		 *
+		 * Both variants suffer from the same problem: if the driver
+		 * sleeps, then it blocks all ioctls since the lock is still
+		 * held. This is very common for VIDIOC_DQBUF since that
+		 * normally waits for a frame to arrive. As a result any other
+		 * ioctl calls will proceed very, very slowly since each call
+		 * will have to wait for the VIDIOC_QBUF to finish. Things that
+		 * should take 0.01s may now take 10-20 seconds.
+		 *
+		 * The workaround is to *not* take the lock for VIDIOC_DQBUF.
+		 * This actually works OK for videobuf-based drivers, since
+		 * videobuf will take its own internal lock.
+		 */
+		static DEFINE_MUTEX(v4l2_ioctl_mutex);
+		struct mutex *m = vdev->v4l2_dev ?
+			&vdev->v4l2_dev->ioctl_lock : &v4l2_ioctl_mutex;
+
+		if (cmd != VIDIOC_DQBUF) {
+			int res = mutex_lock_interruptible(m);
+
+			if (res)
+				return res;
+		}
 		if (video_is_registered(vdev))
 			ret = vdev->fops->ioctl(filp, cmd, arg);
-		unlock_kernel();
+		if (cmd != VIDIOC_DQBUF)
+			mutex_unlock(m);
 	} else
 		ret = -ENOTTY;
 
drivers/media/video/v4l2-device.c +1 -0
index 0b08f96..7fe6f92 100644
@@ -35,6 +35,7 @@ int v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev)
 
 	INIT_LIST_HEAD(&v4l2_dev->subdevs);
 	spin_lock_init(&v4l2_dev->lock);
+	mutex_init(&v4l2_dev->ioctl_lock);
 	v4l2_dev->dev = dev;
 	if (dev == NULL) {
 		/* If dev == NULL, then name must be filled in by the caller */
include/media/v4l2-dev.h +1 -1
index 15802a0..59dec5a 100644
@@ -39,7 +39,7 @@ struct v4l2_file_operations {
 	ssize_t (*read) (struct file *, char __user *, size_t, loff_t *);
 	ssize_t (*write) (struct file *, const char __user *, size_t, loff_t *);
 	unsigned int (*poll) (struct file *, struct poll_table_struct *);
-	long (*ioctl) (struct file *, unsigned int, unsigned long);
+	long (*ioctl __deprecated) (struct file *, unsigned int, unsigned long);
 	long (*unlocked_ioctl) (struct file *, unsigned int, unsigned long);
 	int (*mmap) (struct file *, struct vm_area_struct *);
 	int (*open) (struct file *);
include/media/v4l2-device.h +2 -0
index 6648036..b16f307 100644
@@ -51,6 +51,8 @@ struct v4l2_device {
 			unsigned int notification, void *arg);
 	/* The control handler. May be NULL. */
 	struct v4l2_ctrl_handler *ctrl_handler;
+	/* BKL replacement mutex. Temporary solution only. */
+	struct mutex ioctl_lock;
 };
 
 /* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
#22 lore raw

RFC PATCH v2 15/15 cx18: convert to unlocked_ioctl.

In reply to Hans Verkuil
---
 drivers/media/video/cx18/cx18-streams.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/cx18/cx18-streams.c +1 -1
index 9045f1e..ab461e2 100644
@@ -41,7 +41,7 @@ static struct v4l2_file_operations cx18_v4l2_enc_fops = {
 	.read = cx18_v4l2_read,
 	.open = cx18_v4l2_open,
 	/* FIXME change to video_ioctl2 if serialization lock can be removed */
-	.ioctl = cx18_v4l2_ioctl,
+	.unlocked_ioctl = cx18_v4l2_ioctl,
 	.release = cx18_v4l2_close,
 	.poll = cx18_v4l2_enc_poll,
 };
Signature · 1 line
1.7.0.4
#23 lore raw

Re: [RFCv2 PATCH 15/15] cx18: convert to unlocked_ioctl.

Quoted 10 lines · Hans Verkuil
---
 drivers/media/video/cx18/cx18-streams.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
drivers/media/video/cx18/cx18-streams.c +0 -0
index 9045f1e..ab461e2 100644

drivers/media/video/cx18/cx18-streams.c static struct v4l2_file_operations cx18_v4l2_enc_fops = { · line 47

Quoted 8 lines
drivers/media/video/cx18/cx18-streams.c +1 -1
@@ -41,7 +41,7 @@ static struct v4l2_file_operations cx18_v4l2_enc_fops = {
 	.read = cx18_v4l2_read,
 	.open = cx18_v4l2_open,
 	/* FIXME change to video_ioctl2 if serialization lock can be removed */
-	.ioctl = cx18_v4l2_ioctl,
+	.unlocked_ioctl = cx18_v4l2_ioctl,
 	.release = cx18_v4l2_close,
 	.poll = cx18_v4l2_enc_poll,
 };

Hans,

Because I haven't done my homework on the ALSA API, could you also add snd_cx18_lock()/snd_cx18_unlock() in snd_cx18_pcm_ioctl()?

Devin,

Do you know off the top of your head if any other operations in cx18-alsa-* may need additional locking?

I am an ALSA API callback idiot. :)

Regards,
Andy