Skip to contentSkip to conversation

still an issue ?? - Can't get strong symbol to override weak one

U-Boot Joachim Rahn 3 participants 4 messages Nov 17, 2010 – Nov 18, 2010

lore
Share & tools
lore
#0 lore raw

Hi all,

I've ported u-boot to our ARM board based on at91sam9263.

When I try to use the LED functions I have problems getting strong symbols overriden by weak ones.

I'm just stumbling upon the archive entries

	http://lists.denx.de/pipermail/u-boot/2008-June/035540.html
and
	http://lists.denx.de/pipermail/u-boot/2008-July/037619.html

Seems I have exact that problem.
Has this been solved?

Any hints how I should proceed to stay compatible with u-boot?

Cheers,
Joachim

#1 lore raw

Dear Joachim,

Quoted 8 lines · Joachim Rahn

Hi all,

I've ported u-boot to our ARM board based on at91sam9263.

When I try to use the LED functions I have problems getting strong symbols overriden by weak ones.

Quoted 7 lines

I'm just stumbling upon the archive entries

	http://lists.denx.de/pipermail/u-boot/2008-June/035540.html
and
	http://lists.denx.de/pipermail/u-boot/2008-July/037619.html

Seems I have exact that problem.
Has this been solved?

This issue is solved by this patch:

http://www.denx.de/wiki/pub/U-Boot/TooBigPatches/0001-Switch-from-archive-libraries-to-partial-linking-v4.patch

Here is the relevant thread from the mailing list:

    http://www.mail-archive.com/u-boot at lists.denx.de/msg41959.html

Note that the patch has not yet made it into U-Boot and may change again before it is accepted.

Regards,

Signature · 1 line
Sebastien
#2 lore raw

Dear Sebastian,

thanks for the fast response!

O.k. so I will use my small local workaround until your proposed patch is accepted and included in the official source tree.

Best regards,
Joachim

Quoted 31 lines · Sebastien Carlier

Dear Joachim,

Quoted 8 lines · Joachim Rahn

Hi all,

I've ported u-boot to our ARM board based on at91sam9263.

When I try to use the LED functions I have problems getting strong symbols overriden by weak ones.

Quoted 7 lines

I'm just stumbling upon the archive entries

	http://lists.denx.de/pipermail/u-boot/2008-June/035540.html
and
	http://lists.denx.de/pipermail/u-boot/2008-July/037619.html

Seems I have exact that problem.
Has this been solved?

This issue is solved by this patch:

http://www.denx.de/wiki/pub/U-Boot/TooBigPatches/0001-Switch-from-archive-libraries-to-partial-linking-v4.patch

Here is the relevant thread from the mailing list:

    http://www.mail-archive.com/u-boot at lists.denx.de/msg41959.html

Note that the patch has not yet made it into U-Boot and may change again before it is accepted.

Regards,

#3 lore raw

Dear Joachim Rahn,

Quoted 3 lines · In message <[email protected]> you wrote:

O.k. so I will use my small local workaround until your proposed patch is accepted and included in the official source tree.

That was pulled into mainline last night.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There's no honorable way to kill, no gentle way to destroy.  There is
nothing good in war.  Except its ending.
	-- Abraham Lincoln, "The Savage Curtain", stardate 5906.5