mx51_babbage: Add AT24C512 EEPROM support
Subsystems (2)
PATCH 1/1 mx51_babbage: Add AT24C512 EEPROM support
MX51 Babbage has an AT24C512 connected to I2C1 on its expansion board.
Add support for it.
Signed-off-by Fabio Estevam <[email protected]>
--- arch/arm/mach-mx5/board-mx51_babbage.c | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)
arch/arm/mach-mx5/board-mx51_babbage.c +16 -0
@@ -22,6 +22,7 @@#include <linux/input.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> +#include <linux/i2c/at24.h> #include <mach/common.h> #include <mach/hardware.h>
@@ -342,6 +343,19 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), }; +static struct at24_platform_data at24c512 = { + .byte_len =SZ_512K /8 , + .page_size =128 , + .flags =AT24_FLAG_ADDR16 , +}; + +static struct i2c_board_info mx51_babbage_i2c_devices[] = { + { +I2C_BOARD_INFO ("at24-eeprom" ,0x50 ), + .platform_data = &at24c512, + }, +}; +/* * Board specific initialization. */
@@ -364,6 +378,8 @@ static void __init mxc_board_init(void)mxc_iomux_v3_setup_pad (&power_key);imx51_add_gpio_keys (&imx_button_data); +i2c_register_board_info (0 , mx51_babbage_i2c_devices, +ARRAY_SIZE (mx51_babbage_i2c_devices));imx51_add_imx_i2c (0 , &babbage_i2c_data);imx51_add_imx_i2c (1 , &babbage_i2c_data);mxc_register_device (&mxc_hsi2c_device, &babbage_hsi2c_data);
Signature · 1 line
1.6.0.4
PATCH 1/1 mx51_babbage: Add AT24C512 EEPROM support
Hi Fabio,
Quoted 43 lines · Fabio Estevam
MX51 Babbage has an AT24C512 connected to I2C1 on its expansion board.
Add support for it.
Signed-off-by Fabio Estevam <[email protected]>--- arch/arm/mach-mx5/board-mx51_babbage.c | 16 ++++++++++++++++ 1 files changed, 16 insertions(+), 0 deletions(-)arch/arm/mach-mx5/board-mx51_babbage.c +14
-0@@ -22,6 +22,7 @@#include <linux/input.h> #include <linux/spi/flash.h> #include <linux/spi/spi.h> +#include <linux/i2c/at24.h> #include <mach/common.h> #include <mach/hardware.h> @@ -342,6 +343,19 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), }; +static struct at24_platform_data at24c512 = { + .byte_len =SZ_512K /8 , + .page_size =128 , + .flags =AT24_FLAG_ADDR16 , +}; + +static struct i2c_board_info mx51_babbage_i2c_devices[] = { + { +I2C_BOARD_INFO ("at24-eeprom" ,0x50 ), + .platform_data = &at24c512, + }, +}; +/* * Board specific initialization. */
arch/arm/mach-mx5/board-mx51_babbage.c static void __init mxc_board_init(void) · line 382
Quoted 5 lines
arch/arm/mach-mx5/board-mx51_babbage.c +2
-0@@ -364,6 +378,8 @@ static void __init mxc_board_init(void)mxc_iomux_v3_setup_pad (&power_key);imx51_add_gpio_keys (&imx_button_data); +i2c_register_board_info (0 , mx51_babbage_i2c_devices, +ARRAY_SIZE (mx51_babbage_i2c_devices));
Can we move this call to a mx51_babbage_epansionboard_init() function? This makes it clear that this is not available without the expansion board and we can decide later to call this function only when an expansion board is connected.
Sascha
Signature · 4 lines
Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |