missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02)

DISCUSSION Arkadiusz Miskiewicz 2 participants 5 messages Nov 19, 2010 SCSI

lore

Share & tools

lore

Arkadiusz Miskiewicz

author

2010-11-19 17:42 UTC #0 lore raw

Hi,

I wonder if mptsas driver is able to support this hardware?

04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI- X Fusion-MPT SAS [1000:0055] (rev 02)

        Subsystem: Intel Corporation Device [8086:3504]

Currently driver doesn't handle 1000:0055 pciid. The problem seems quite old since I found someone asking for it long time ago
http://lkml.org/lkml/2007/1/23/87

Signature · 6 lines

Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Arkadiusz Miskiewicz

author

2010-11-19 18:39 UTC #1 lore raw

Quoted 11 lines · Arkadiusz Miskiewicz

Hi,
I wonder if mptsas driver is able to support this hardware?
04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI- X Fusion-MPT SAS [1000:0055] (rev 02)
        Subsystem: Intel Corporation Device [8086:3504]
Currently driver doesn't handle 1000:0055 pciid. The problem seems quite old since I found someone asking for it long time ago
http://lkml.org/lkml/2007/1/23/87

[root@rescue mptsas]# echo 1000 0055 > new_id
[root@rescue mptsas]#

drives were detected, I was able to create filesystem, write, read few files and these short tests worked well.

So I wonder what's the case with it not being added to mptsas driver? Thanks.

[ 5689.436551] mptsas 0000:04:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5689.436886] mptbase: ioc0: Initiating bringup
[ 5690.042770] ioc0: : Capabilities={Initiator}
[ 5699.421066] scsi8 : ioc0: , FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16
[ 5699.458704] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
[ 5699.461495] scsi 8:0:0:0: Direct-Access     ATA      ST9500420AS      SDM1 PQ: 0 ANSI: 5
[ 5699.465182] sd 8:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.465822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
[ 5699.466599] sd 8:0:0:0: Attached scsi generic sg0 type 0
[ 5699.469232] scsi 8:0:1:0: Direct-Access     ATA      ST9500420AS      SDM1 PQ: 0 ANSI: 5
[ 5699.471140] sd 8:0:1:0: Attached scsi generic sg1 type 0
[ 5699.472842] sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.801422] sd 8:0:0:0: [sda] Write Protect is off
[ 5699.801425] sd 8:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 5699.806427] sd 8:0:1:0: [sdb] Write Protect is off
[ 5699.806431] sd 8:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 5699.822024] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.827135] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.928108]  sda:
[ 5699.933163]  sdb: unknown partition table
[ 5699.962440]  unknown partition table
[ 5700.068369] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5700.073759] sd 8:0:1:0: [sdb] Attached SCSI disk

Signature · 6 lines

Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Is this an on board MPT chip or is it an add-in HBA? I'm not aware of a DID of 0x55. More than likely it’s either a megaraid board or a customer tweaked something of ours. A photo of it if it's an add-in or a link to the product it's in would help narrow it down. Also, if it's an mptlinux card, there should be two identifications on it. Both should be on a white label with a barcode. One will be SAS3####X... The other will be L#-####-###.

-----Original Message-----
From: Arkadiusz Miskiewicz [mailto:[email protected]]
Sent: Friday, November 19, 2010 12:39 PM
To: Moore, Eric
Cc: DL-MPT Fusion Linux; [email protected]
Subject: Re: missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02)

Quoted 11 lines · Arkadiusz Miskiewicz

Hi,
I wonder if mptsas driver is able to support this hardware?
04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI- X Fusion-MPT SAS [1000:0055] (rev 02)
        Subsystem: Intel Corporation Device [8086:3504]
Currently driver doesn't handle 1000:0055 pciid. The problem seems quite old since I found someone asking for it long time ago
http://lkml.org/lkml/2007/1/23/87

[root@rescue mptsas]# echo 1000 0055 > new_id
[root@rescue mptsas]#

drives were detected, I was able to create filesystem, write, read few files and these short tests worked well.

So I wonder what's the case with it not being added to mptsas driver? Thanks.

[ 5689.436551] mptsas 0000:04:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5689.436886] mptbase: ioc0: Initiating bringup
[ 5690.042770] ioc0: : Capabilities={Initiator}
[ 5699.421066] scsi8 : ioc0: , FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16
[ 5699.458704] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0, phy 0, sas_addr 0x1221000000000000
[ 5699.461495] scsi 8:0:0:0: Direct-Access     ATA      ST9500420AS      SDM1 PQ: 0 ANSI: 5
[ 5699.465182] sd 8:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.465822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000
[ 5699.466599] sd 8:0:0:0: Attached scsi generic sg0 type 0
[ 5699.469232] scsi 8:0:1:0: Direct-Access     ATA      ST9500420AS      SDM1 PQ: 0 ANSI: 5
[ 5699.471140] sd 8:0:1:0: Attached scsi generic sg1 type 0
[ 5699.472842] sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5699.801422] sd 8:0:0:0: [sda] Write Protect is off
[ 5699.801425] sd 8:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 5699.806427] sd 8:0:1:0: [sdb] Write Protect is off
[ 5699.806431] sd 8:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 5699.822024] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.827135] sd 8:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5699.928108]  sda:
[ 5699.933163]  sdb: unknown partition table
[ 5699.962440]  unknown partition table
[ 5700.068369] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5700.073759] sd 8:0:1:0: [sdb] Attached SCSI disk

Signature · 2 lines

Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/

Arkadiusz Miskiewicz

author

2010-11-19 20:30 UTC #3 lore raw

Quoted 7 lines · Jason

Is this an on board MPT chip or is it an add-in HBA? I'm not aware of a DID of 0x55. More than likely it’s either a megaraid board or a customer tweaked something of ours. A photo of it if it's an add-in or a link to the product it's in would help narrow it down. Also, if it's an mptlinux card, there should be two identifications on it. Both should be on a white label with a barcode. One will be SAS3####X... The other will be L#-####-###.

I'm almost sure it's onboard controller (cannot check, machine is available remotely only). It's Intel SR1550 server.

Anyway I found a option in normal BIOS to disable "intel swraid" and now it is detected nicely by mptsas without any new_id tweaks (becomes visible under pciid already known to mptsas).

Thanks!

Quoted 58 lines

-----Original Message-----
From: Arkadiusz Miskiewicz [mailto:[email protected]]
Sent: Friday, November 19, 2010 12:39 PM
To: Moore, Eric
Cc: DL-MPT Fusion Linux; [email protected]
Subject: Re: missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02)
Quoted 4 lines · Arkadiusz Miskiewicz
Hi,
I wonder if mptsas driver is able to support this hardware?
Quoted 8 lines
04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI- X Fusion-MPT SAS [1000:0055] (rev 02)
        Subsystem: Intel Corporation Device [8086:3504]
Currently driver doesn't handle 1000:0055 pciid. The problem seems quite old since I found someone asking for it long time ago
http://lkml.org/lkml/2007/1/23/87
[root@rescue mptsas]# echo 1000 0055 > new_id
[root@rescue mptsas]#
drives were detected, I was able to create filesystem, write, read few files and these short tests worked well.
So I wonder what's the case with it not being added to mptsas driver? Thanks.
[ 5689.436551] mptsas 0000:04:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16 [ 5689.436886] mptbase: ioc0: Initiating bringup
[ 5690.042770] ioc0: : Capabilities={Initiator}
[ 5699.421066] scsi8 : ioc0: , FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16
[ 5699.458704] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0,
phy 0, sas_addr 0x1221000000000000 [ 5699.461495] scsi 8:0:0:0:
Direct-Access ATA ST9500420AS SDM1 PQ: 0 ANSI: 5 [
5699.465182] sd 8:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5699.465822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000 [ 5699.466599] sd 8:0:0:0:
Attached scsi generic sg0 type 0
[ 5699.469232] scsi 8:0:1:0: Direct-Access     ATA      ST9500420AS     
SDM1 PQ: 0 ANSI: 5 [ 5699.471140] sd 8:0:1:0: Attached scsi generic sg1
type 0
[ 5699.472842] sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB) [ 5699.801422] sd 8:0:0:0: [sda] Write Protect is off
[ 5699.801425] sd 8:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 5699.806427] sd 8:0:1:0: [sdb] Write Protect is off
[ 5699.806431] sd 8:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 5699.822024] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA [ 5699.827135] sd 8:0:1:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA [ 5699.928108] 
sda:
[ 5699.933163]  sdb: unknown partition table
[ 5699.962440]  unknown partition table
[ 5700.068369] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5700.073759] sd 8:0:1:0: [sdb] Attached SCSI disk

Signature · 6 lines

Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Unrein, Jason

2010-11-19 20:37 UTC #4 lore raw

So it sounds like they're just tweaking the ID so it will be identified by their driver or megaraid driver instead of ours. I'm assuming the new device ID is 0x54 instead which should be recognized and work fine like you mentioned.

-----Original Message-----
From: Arkadiusz Miskiewicz [mailto:[email protected]]
Sent: Friday, November 19, 2010 2:31 PM
To: Unrein, Jason
Cc: Moore, Eric; DL-MPT Fusion Linux; [email protected]
Subject: Re: missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02)

Quoted 7 lines · Jason

Is this an on board MPT chip or is it an add-in HBA? I'm not aware of a DID of 0x55. More than likely it’s either a megaraid board or a customer tweaked something of ours. A photo of it if it's an add-in or a link to the product it's in would help narrow it down. Also, if it's an mptlinux card, there should be two identifications on it. Both should be on a white label with a barcode. One will be SAS3####X... The other will be L#-####-###.

I'm almost sure it's onboard controller (cannot check, machine is available remotely only). It's Intel SR1550 server.

Anyway I found a option in normal BIOS to disable "intel swraid" and now it is detected nicely by mptsas without any new_id tweaks (becomes visible under pciid already known to mptsas).

Thanks!

Quoted 58 lines

-----Original Message-----
From: Arkadiusz Miskiewicz [mailto:[email protected]]
Sent: Friday, November 19, 2010 12:39 PM
To: Moore, Eric
Cc: DL-MPT Fusion Linux; [email protected]
Subject: Re: missing mptsas support for LSI Logic / Symbios Logic SAS1068 PCI-X Fusion-MPT SAS [1000:0055] (rev 02)
Quoted 4 lines · Arkadiusz Miskiewicz
Hi,
I wonder if mptsas driver is able to support this hardware?
Quoted 8 lines
04:08.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI- X Fusion-MPT SAS [1000:0055] (rev 02)
        Subsystem: Intel Corporation Device [8086:3504]
Currently driver doesn't handle 1000:0055 pciid. The problem seems quite old since I found someone asking for it long time ago
http://lkml.org/lkml/2007/1/23/87
[root@rescue mptsas]# echo 1000 0055 > new_id
[root@rescue mptsas]#
drives were detected, I was able to create filesystem, write, read few files and these short tests worked well.
So I wonder what's the case with it not being added to mptsas driver? Thanks.
[ 5689.436551] mptsas 0000:04:08.0: PCI INT A -> GSI 16 (level, low) -> IRQ
16 [ 5689.436886] mptbase: ioc0: Initiating bringup
[ 5690.042770] ioc0: : Capabilities={Initiator}
[ 5699.421066] scsi8 : ioc0: , FwRev=01120000h, Ports=1, MaxQ=511, IRQ=16
[ 5699.458704] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 0,
phy 0, sas_addr 0x1221000000000000 [ 5699.461495] scsi 8:0:0:0:
Direct-Access ATA ST9500420AS SDM1 PQ: 0 ANSI: 5 [
5699.465182] sd 8:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 5699.465822] mptsas: ioc0: attaching sata device: fw_channel 0, fw_id 1, phy 1, sas_addr 0x1221000001000000 [ 5699.466599] sd 8:0:0:0:
Attached scsi generic sg0 type 0
[ 5699.469232] scsi 8:0:1:0: Direct-Access     ATA      ST9500420AS     
SDM1 PQ: 0 ANSI: 5 [ 5699.471140] sd 8:0:1:0: Attached scsi generic sg1
type 0
[ 5699.472842] sd 8:0:1:0: [sdb] 976773168 512-byte logical blocks: (500
GB/465 GiB) [ 5699.801422] sd 8:0:0:0: [sda] Write Protect is off
[ 5699.801425] sd 8:0:0:0: [sda] Mode Sense: 73 00 00 08
[ 5699.806427] sd 8:0:1:0: [sdb] Write Protect is off
[ 5699.806431] sd 8:0:1:0: [sdb] Mode Sense: 73 00 00 08
[ 5699.822024] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA [ 5699.827135] sd 8:0:1:0: [sdb] Write cache:
enabled, read cache: enabled, doesn't support DPO or FUA [ 5699.928108] 
sda:
[ 5699.933163]  sdb: unknown partition table
[ 5699.962440]  unknown partition table
[ 5700.068369] sd 8:0:0:0: [sda] Attached SCSI disk
[ 5700.073759] sd 8:0:1:0: [sdb] Attached SCSI disk

Signature · 2 lines

Arkadiusz Miśkiewicz        PLD/Linux Team
arekm / maven.pl            http://ftp.pld-linux.org/