Skip to contentSkip to conversation

ext3: Add batched discard support for ext3

PATCH In review Lukas Czerner 3 participants 9 messages Nov 22, 2010 – Nov 24, 2010 VFS

lore
Share & tools
lore
#0 lore raw

PATCH 1/2 ext3: Add batched discard support for ext3

Walk through allocation groups and trim all free extents. It can be invoked through FITRIM ioctl on the file system. The main idea is to provide a way to trim the whole file system if needed, since some SSD's may suffer from performance loss after the whole device was filled (it does not mean that fs is full!).

It search for free extents in allocation groups specified by Byte range start -> start+len. When the free extent is within this range, blocks are marked as used and then trimmed. Afterwards these blocks are marked as free in per-group bitmap.

---
 fs/ext3/balloc.c        |  262 +++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/ext3_fs.h |    1 +
 2 files changed, 263 insertions(+), 0 deletions(-)
fs/ext3/balloc.c +262 -0
index b3db226..8393abf 100644
@@ -20,6 +20,7 @@
 #include <linux/ext3_jbd.h>
 #include <linux/quotaops.h>
 #include <linux/buffer_head.h>
+#include <linux/blkdev.h>
 
 /*
  * balloc.c contains the blocks allocation and deallocation routines
@@ -39,6 +40,23 @@
 
 #define in_range(b, first, len)	((b) >= (first) && (b) <= (first) + (len) - 1)
 
+/*
+ * Calculate the block group number and offset, given a block number
+ */
+void ext3_get_group_no_and_offset(struct super_block *sb, ext3_fsblk_t blocknr,
+		unsigned long *blockgrpp, ext3_grpblk_t *offsetp)
+{
+	struct ext3_super_block *es = EXT3_SB(sb)->s_es;
+	ext3_grpblk_t offset;
+
+	blocknr = blocknr - le32_to_cpu(es->s_first_data_block);
+	offset = do_div(blocknr, EXT3_BLOCKS_PER_GROUP(sb));
+	if (offsetp)
+		*offsetp = offset;
+	if (blockgrpp)
+		*blockgrpp = blocknr;
+}
+
 /**
  * ext3_get_group_desc() -- load group descriptor from disk
  * @sb:			super block
@@ -1885,3 +1903,247 @@ unsigned long ext3_bg_num_gdb(struct super_block *sb, int group)
 	return ext3_bg_num_gdb_meta(sb,group);
 
 }
+
+/**
+ * ext3_trim_all_free -- function to trim all free space in alloc. group
+ * @sb:			super block for file system
+ * @group:		allocation group to trim
+ * @start:		first group block to examine
+ * @max:		last group block to examine
+ * @gdp:		allocation group description structure
+ * @minblocks:		minimum extent block count
+ *
+ * ext3_trim_all_free walks through group's block bitmap searching for free
+ * blocks. When the free block is found, it tries to allocate this block and
+ * consequent free block to get the biggest free extent possible, until it
+ * reaches any used block. Then issue a TRIM command on this extent and free
+ * the extent in the block bitmap. This is done until whole group is scanned.
+ */
+ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, unsigned int group,
+				ext3_grpblk_t start, ext3_grpblk_t max,
+				ext3_grpblk_t minblocks)
+{
+	handle_t *handle;
+	ext3_grpblk_t next, free_blocks, bit, freed, count = 0;
+	ext3_fsblk_t discard_block;
+	struct ext3_sb_info *sbi;
+	struct buffer_head *gdp_bh, *bitmap_bh = NULL;
+	struct ext3_group_desc *gdp;
+	int err = 0, ret = 0;
+
+	/*
+	 * We will update one block bitmap, and one group descriptor
+	 */
+	handle = ext3_journal_start_sb(sb, 2);
+	if (IS_ERR(handle)) {
+		err = PTR_ERR(handle);
+		return err;
+	}
+
+	bitmap_bh = read_block_bitmap(sb, group);
+	if (!bitmap_bh)
+		goto err_out;
+
+	BUFFER_TRACE(bitmap_bh, "getting undo access");
+	err = ext3_journal_get_undo_access(handle, bitmap_bh);
+	if (err)
+		goto err_out;
+
+	gdp = ext3_get_group_desc(sb, group, &gdp_bh);
+	if (!gdp)
+		goto err_out;
+
+	BUFFER_TRACE(gdp_bh, "get_write_access");
+	err = ext3_journal_get_write_access(handle, gdp_bh);
+	if (err)
+		goto err_out;
+
+	free_blocks = le16_to_cpu(gdp->bg_free_blocks_count);
+	sbi = EXT3_SB(sb);
+
+	 /* Walk through the whole group */
+	while (start < max) {
+
+		start = bitmap_search_next_usable_block(start, bitmap_bh, max);
+		if (start < 0)
+			break;
+		next = start;
+
+		/*
+		 * Allocate contiguous free extents by setting bits in the
+		 * block bitmap
+		 */
+		while (next < max
+			&& claim_block(sb_bgl_lock(sbi, group),
+					next, bitmap_bh)) {
+			next++;
+		}
+
+		 /* We did not claim any blocks */
+		if (next == start)
+			continue;
+
+		discard_block = (ext3_fsblk_t)start +
+				ext3_group_first_block_no(sb, group);
+
+		/* Update counters */
+		spin_lock(sb_bgl_lock(sbi, group));
+		le16_add_cpu(&gdp->bg_free_blocks_count, start - next);
+		spin_unlock(sb_bgl_lock(sbi, group));
+		percpu_counter_sub(&sbi->s_freeblocks_counter, next - start);
+
+		/* Do not issue a TRIM on extents smaller than minblocks */
+		if ((next - start) < minblocks)
+			goto free_extent;
+
+		 /* Send the TRIM command down to the device */
+		ret = sb_issue_discard(sb, discard_block, next - start,
+				       GFP_NOFS, 0);
+		count += (next - start);
+free_extent:
+		freed = 0;
+
+		/*
+		 * Clear bits in the bitmap
+		 */
+		for (bit = start; bit < next; bit++) {
+			BUFFER_TRACE(bitmap_bh, "clear bit");
+			if (!ext3_clear_bit_atomic(sb_bgl_lock(sbi, group),
+						bit, bitmap_bh->b_data)) {
+				ext3_error(sb, __func__,
+					"bit already cleared for block "E3FSBLK,
+					 (unsigned long)bit);
+				BUFFER_TRACE(bitmap_bh, "bit already cleared");
+			} else {
+				freed++;
+			}
+		}
+
+		/* Update couters */
+		spin_lock(sb_bgl_lock(sbi, group));
+		le16_add_cpu(&gdp->bg_free_blocks_count, freed);
+		spin_unlock(sb_bgl_lock(sbi, group));
+		percpu_counter_add(&sbi->s_freeblocks_counter, next - start);
+
+		start = next;
+		if (ret < 0) {
+			if (ret == -EOPNOTSUPP) {
+				ext3_warning(sb, __func__,
+					"discard not supported!");
+				count = ret;
+				break;
+			}
+			err = ret;
+			break;
+		}
+
+		if (fatal_signal_pending(current)) {
+			count = -ERESTARTSYS;
+			break;
+		}
+
+		cond_resched();
+
+		/* No more suitable extents */
+		if ((free_blocks - count) < minblocks)
+			break;
+	}
+
+	/* We dirtied the bitmap block */
+	BUFFER_TRACE(bitmap_bh, "dirtied bitmap block");
+	err = ext3_journal_dirty_metadata(handle, bitmap_bh);
+
+	/* And the group descriptor block */
+	BUFFER_TRACE(gdp_bh, "dirtied group descriptor block");
+	ret = ext3_journal_dirty_metadata(handle, gdp_bh);
+	if (!err)
+		err = ret;
+
+	ext3_debug("trimmed %d blocks in the group %d\n",
+		count, group);
+
+err_out:
+	if (err) {
+		ext3_std_error(sb, err);
+		count = err;
+	}
+	ext3_journal_stop(handle);
+	brelse(bitmap_bh);
+
+	return count;
+}
+
+/**
+ * ext3_trim_fs() -- trim ioctl handle function
+ * @sb:			superblock for filesystem
+ * @start:		First Byte to trim
+ * @len:		number of Bytes to trim from start
+ * @minlen:		minimum extent length in Bytes
+ *
+ * ext3_trim_fs goes through all allocation groups containing Bytes from
+ * start to start+len. For each such a group ext3_trim_all_free function
+ * is invoked to trim all free space.
+ */
+int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range)
+{
+	ext3_grpblk_t last_block, first_block, free_blocks;
+	unsigned long first_group, last_group;
+	unsigned long group, ngroups;
+	struct ext3_group_desc *gdp;
+	struct ext3_super_block *es;
+	uint64_t start, len, minlen, trimmed;
+	int ret = 0;
+
+	start = range->start >> sb->s_blocksize_bits;
+	len = range->len >> sb->s_blocksize_bits;
+	minlen = range->minlen >> sb->s_blocksize_bits;
+	trimmed = 0;
+
+	if (unlikely(minlen > EXT3_BLOCKS_PER_GROUP(sb)))
+		return -EINVAL;
+
+	es = EXT3_SB(sb)->s_es;
+	ngroups = EXT3_SB(sb)->s_groups_count;
+	smp_rmb();
+
+	/* Determine first and last group to examine based on start and len */
+	ext3_get_group_no_and_offset(sb, (ext3_fsblk_t) start,
+				     &first_group, &first_block);
+	ext3_get_group_no_and_offset(sb, (ext3_fsblk_t) (start + len),
+				     &last_group, &last_block);
+	last_group = (last_group > ngroups - 1) ? ngroups - 1 : last_group;
+	last_block = EXT3_BLOCKS_PER_GROUP(sb);
+
+	if (first_group > last_group)
+		return -EINVAL;
+
+	for (group = first_group; group <= last_group; group++) {
+		gdp = ext3_get_group_desc(sb, group, NULL);
+		if (!gdp)
+			break;
+
+		free_blocks = le16_to_cpu(gdp->bg_free_blocks_count);
+		if (free_blocks < minlen)
+			continue;
+
+		if (len >= EXT3_BLOCKS_PER_GROUP(sb))
+			len -= (EXT3_BLOCKS_PER_GROUP(sb) - first_block);
+		else
+			last_block = len;
+
+		ret = ext3_trim_all_free(sb, group, first_block,
+					last_block, minlen);
+		if (ret < 0)
+			break;
+
+		trimmed += ret;
+		first_block = 0;
+	}
+
+	if (ret >= 0)
+		ret = 0;
+
+	range->len = trimmed * sb->s_blocksize;
+
+	return ret;
+}
include/linux/ext3_fs.h +1 -0
index 6ce1bca..a443965 100644
@@ -856,6 +856,7 @@ extern struct ext3_group_desc * ext3_get_group_desc(struct super_block * sb,
 extern int ext3_should_retry_alloc(struct super_block *sb, int *retries);
 extern void ext3_init_block_alloc_info(struct inode *);
 extern void ext3_rsv_window_add(struct super_block *sb, struct ext3_reserve_window_node *rsv);
+extern int ext3_trim_fs(struct super_block *sb, struct fstrim_range *range);
 
 /* dir.c */
 extern int ext3_check_dir_entry(const char *, struct inode *,
Signature · 1 line
1.7.2.3
#1 lore raw

PATCH 2/2 ext3: Add FITRIM handle for ext3

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

---
 fs/ext3/ioctl.c |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)
fs/ext3/ioctl.c +22 -0
index 8897481..fc080dd 100644
@@ -276,7 +276,29 @@ group_add_out:
 		mnt_drop_write(filp->f_path.mnt);
 		return err;
 	}
+	case FITRIM: {
 
+		struct super_block *sb = inode->i_sb;
+		struct fstrim_range range;
+		int ret = 0;
+
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&range, (struct fstrim_range *)arg,
+				   sizeof(range)))
+			return -EFAULT;
+
+		ret = ext3_trim_fs(sb, &range);
+		if (ret < 0)
+			return ret;
+
+		if (copy_to_user((struct fstrim_range *)arg, &range,
+				 sizeof(range)))
+			return -EFAULT;
+
+		return 0;
+	}
 
 	default:
 		return -ENOTTY;
Signature · 1 line
1.7.2.3
#2 lore raw

Re: [PATCH 2/2] ext3: Add FITRIM handle for ext3

Quoted 8 lines · Lukas Czerner

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

That's a misleading description in my opinion, from my understanding this is more accurate:

===
After the FITRIM is done, the number of bytes passed from the filesystem down the block stack to the device for potential discard is stored in fstrim_range.len. This number is a maximum discard amount from the storage device's perspective, because FITRIM called repeated will keep sending the same sectors for discard repeatedly. fstrim_range.len will report the same potential discard bytes each time, but only sectors which had been written to between the discards would actually be discarded by the storage device. Further, the kernel block layer reserves the right to adjust the discard ranges to fit raid stripe geometry, non-trim capable devices in a LVM setup, etc. These reductions would not be reflected in fstrim_range.len.

As 2.6.37, the kernel block layer does not fully support discard and as such will simply ignore all discard requests sent to volumes created by device mapper or mdraid. This is done in a silent way, so these failures to discard are also not reflected in fstrim_range.len.

Thus fstrim_range.len can give the user better insight on how much storage space has potentially been released for wear-leveling, but it needs to be one of only one criteria the userspace tools take into account when trying to optimize calls to FITRIM.
===

Obviously, I'd like to also see that also in API documentation for FITRIM. (And correct me if I'm wrong about device mapper / mdraid. I'd love to be wrong about that statement..)

Greg

#3 lore raw

Re: [PATCH 2/2] ext3: Add FITRIM handle for ext3

Quoted 26 lines · Greg Freemyer
Quoted 8 lines · Lukas Czerner

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

That's a misleading description in my opinion, from my understanding this is more accurate:

===
After the FITRIM is done, the number of bytes passed from the filesystem down the block stack to the device for potential discard is stored in fstrim_range.len. This number is a maximum discard amount from the storage device's perspective, because FITRIM called repeated will keep sending the same sectors for discard repeatedly. fstrim_range.len will report the same potential discard bytes each time, but only sectors which had been written to between the discards would actually be discarded by the storage device. Further, the kernel block layer reserves the right to adjust the discard ranges to fit raid stripe geometry, non-trim capable devices in a LVM setup, etc. These reductions would not be reflected in fstrim_range.len.

Quoted 4 lines

As 2.6.37, the kernel block layer does not fully support discard and as such will simply ignore all discard requests sent to volumes created by device mapper or mdraid. This is done in a silent way, so these failures to discard are also not reflected in fstrim_range.len.

I think this is not entirely true, because we have discard support for dm linear and stripe:

http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=5ae89a8720c28caf35c4e53711d77df2856c404e
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=7b76ec11fec40203836b488496d2df082d5b2022

(Adding Mike Snitzer into cc)

Quoted 7 lines

Thus fstrim_range.len can give the user better insight on how much storage space has potentially been released for wear-leveling, but it needs to be one of only one criteria the userspace tools take into account when trying to optimize calls to FITRIM.
===

Quoted 6 lines

Obviously, I'd like to also see that also in API documentation for FITRIM. (And correct me if I'm wrong about device mapper / mdraid. I'd love to be wrong about that statement..)

Greg

Greg, thank you for this, aside the dm thing, this is definitely a lot better explanation and it would be nice to include this into commit message (it is too late for ext4:).

Jan, do you want me to repost this with new commit message or you can add it yourself ?

Thanks!

-Lukas

reviewer
#4 lore raw

Re: [PATCH 2/2] ext3: Add FITRIM handle for ext3

In reply to Lukas Czerner
Quoted 6 lines · Lukas Czerner

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

Umm, why do we have to do this when FITRIM is already handled in
fs/ioctl.c? I'd expect us to just provide .trim_fs ioctl, no?

Honza

Quoted 43 lines
---
 fs/ext3/ioctl.c |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)
fs/ext3/ioctl.c +22 -0
index 8897481..fc080dd 100644
@@ -276,7 +276,29 @@ group_add_out:
 		mnt_drop_write(filp->f_path.mnt);
 		return err;
 	}
+	case FITRIM: {
 
+		struct super_block *sb = inode->i_sb;
+		struct fstrim_range range;
+		int ret = 0;
+
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&range, (struct fstrim_range *)arg,
+				   sizeof(range)))
+			return -EFAULT;
+
+		ret = ext3_trim_fs(sb, &range);
+		if (ret < 0)
+			return ret;
+
+		if (copy_to_user((struct fstrim_range *)arg, &range,
+				 sizeof(range)))
+			return -EFAULT;
+
+		return 0;
+	}
 
 	default:
 		return -ENOTTY;
Signature · 1 line
1.7.2.3
Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
#5 lore raw

Re: [PATCH 2/2] ext3: Add FITRIM handle for ext3

Quoted 9 lines · Jan Kara
Quoted 6 lines · Lukas Czerner

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

Umm, why do we have to do this when FITRIM is already handled in
fs/ioctl.c? I'd expect us to just provide .trim_fs ioctl, no?

Hi,

see upstream commits:
93bb41f4f8b89ac8b4d0a734bc59634cb0a29a89
e681c047e47c0abe67bf95857f23814372793cb0

unfortunately people was not happy with generic ioctl interface for that purpose, there were concerned that it is no common enough to be included in core vfs and there is no need for new super operation since each filesystem can easily setup its own ioctl handling.

When I say people I need to clarify that it was mainly Christoph Hellwig who had objections against the former implementation and I must say that he had a point.

-Lukas

Quoted 46 lines

Honza

Quoted 43 lines
---
 fs/ext3/ioctl.c |   22 ++++++++++++++++++++++
 1 files changed, 22 insertions(+), 0 deletions(-)
fs/ext3/ioctl.c +22 -0
index 8897481..fc080dd 100644
@@ -276,7 +276,29 @@ group_add_out:
 		mnt_drop_write(filp->f_path.mnt);
 		return err;
 	}
+	case FITRIM: {
 
+		struct super_block *sb = inode->i_sb;
+		struct fstrim_range range;
+		int ret = 0;
+
+		if (!capable(CAP_SYS_ADMIN))
+			return -EPERM;
+
+		if (copy_from_user(&range, (struct fstrim_range *)arg,
+				   sizeof(range)))
+			return -EFAULT;
+
+		ret = ext3_trim_fs(sb, &range);
+		if (ret < 0)
+			return ret;
+
+		if (copy_to_user((struct fstrim_range *)arg, &range,
+				 sizeof(range)))
+			return -EFAULT;
+
+		return 0;
+	}
 
 	default:
 		return -ENOTTY;
Signature · 1 line
1.7.2.3
reviewer
#6 lore raw

Re: [PATCH 2/2] ext3: Add FITRIM handle for ext3

Quoted 18 lines · Lukas Czerner
Quoted 9 lines · Jan Kara
Quoted 6 lines · Lukas Czerner

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

Umm, why do we have to do this when FITRIM is already handled in
fs/ioctl.c? I'd expect us to just provide .trim_fs ioctl, no?

Hi,

see upstream commits:
93bb41f4f8b89ac8b4d0a734bc59634cb0a29a89
e681c047e47c0abe67bf95857f23814372793cb0

Quoted 8 lines

unfortunately people was not happy with generic ioctl interface for that purpose, there were concerned that it is no common enough to be included in core vfs and there is no need for new super operation since each filesystem can easily setup its own ioctl handling.

When I say people I need to clarify that it was mainly Christoph Hellwig who had objections against the former implementation and I must say that he had a point.

OK, I see. I had a fresh look at the patches and I've found a few suboptimal things which I've fixed. Most notably I don't think we have to issue a warning when underlying device does not support FITRIM. Returning EOPNOTSUPP should be enough. And I also think that remounting the filesystem read-only or even panicking (the result of calling ext3_std_error()) is necessary when sb_issue_discard() fails for whatever reason. Sure it is suspicious but we can cope just fine with that. BTW, I think ext4 might want this as well. Finally, we were missing to set the error in a few cases (e.g. when bitmap could not be loaded).

Attached is a diff with what I did and I'll repost what I currently have in my tree.

Honza

Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR
fs/ext3/balloc.c +16 -21
index 8393abf..878cbca 100644
@@ -1935,14 +1935,14 @@ ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, unsigned int group,
 	 * We will update one block bitmap, and one group descriptor
 	 */
 	handle = ext3_journal_start_sb(sb, 2);
-	if (IS_ERR(handle)) {
-		err = PTR_ERR(handle);
-		return err;
-	}
+	if (IS_ERR(handle))
+		return PTR_ERR(handle);
 
 	bitmap_bh = read_block_bitmap(sb, group);
-	if (!bitmap_bh)
+	if (!bitmap_bh) {
+		err = -EIO;
 		goto err_out;
+	}
 
 	BUFFER_TRACE(bitmap_bh, "getting undo access");
 	err = ext3_journal_get_undo_access(handle, bitmap_bh);
@@ -1950,8 +1950,10 @@ ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, unsigned int group,
 		goto err_out;
 
 	gdp = ext3_get_group_desc(sb, group, &gdp_bh);
-	if (!gdp)
+	if (!gdp) {
+		err = -EIO;
 		goto err_out;
+	}
 
 	BUFFER_TRACE(gdp_bh, "get_write_access");
 	err = ext3_journal_get_write_access(handle, gdp_bh);
@@ -1963,7 +1965,6 @@ ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, unsigned int group,
 
 	 /* Walk through the whole group */
 	while (start < max) {
-
 		start = bitmap_search_next_usable_block(start, bitmap_bh, max);
 		if (start < 0)
 			break;
@@ -1997,7 +1998,7 @@ ext3_grpblk_t ext3_trim_all_free(struct super_block *sb, unsigned int group,
 			goto free_extent;
 
 		 /* Send the TRIM command down to the device */
-		ret = sb_issue_discard(sb, discard_block, next - start,
+		err = sb_issue_discard(sb, discard_block, next - start,
 				       GFP_NOFS, 0);
 		count += (next - start);
 free_extent:
@@ -2023,22 +2024,18 @@ free_extent:
 		spin_lock(sb_bgl_lock(sbi, group));
 		le16_add_cpu(&gdp->bg_free_blocks_count, freed);
 		spin_unlock(sb_bgl_lock(sbi, group));
-		percpu_counter_add(&sbi->s_freeblocks_counter, next - start);
+		percpu_counter_add(&sbi->s_freeblocks_counter, freed);
 
 		start = next;
-		if (ret < 0) {
-			if (ret == -EOPNOTSUPP) {
-				ext3_warning(sb, __func__,
-					"discard not supported!");
-				count = ret;
-				break;
-			}
-			err = ret;
+		if (err < 0) {
+			if (err != -EOPNOTSUPP)
+				ext3_warning(sb, __func__, "Discard command "
+					     "returned error %d\n", err);
 			break;
 		}
 
 		if (fatal_signal_pending(current)) {
-			count = -ERESTARTSYS;
+			err = -ERESTARTSYS;
 			break;
 		}
 
@@ -2063,12 +2060,10 @@ free_extent:
 		count, group);
 
 err_out:
-	if (err) {
-		ext3_std_error(sb, err);
+	if (err)
 		count = err;
-	}
 	ext3_journal_stop(handle);
 	brelse(bitmap_bh);
 
#7 lore raw

Re: [PATCH 2/2] ext3: Add FITRIM handle for ext3

Quoted 27 lines · Jan Kara
Quoted 18 lines · Lukas Czerner
Quoted 9 lines · Jan Kara
Quoted 6 lines · Lukas Czerner

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

Umm, why do we have to do this when FITRIM is already handled in
fs/ioctl.c? I'd expect us to just provide .trim_fs ioctl, no?

Hi,

see upstream commits:
93bb41f4f8b89ac8b4d0a734bc59634cb0a29a89
e681c047e47c0abe67bf95857f23814372793cb0

Quoted 8 lines

unfortunately people was not happy with generic ioctl interface for that purpose, there were concerned that it is no common enough to be included in core vfs and there is no need for new super operation since each filesystem can easily setup its own ioctl handling.

When I say people I need to clarify that it was mainly Christoph Hellwig who had objections against the former implementation and I must say that he had a point.

Quoted 6 lines

OK, I see. I had a fresh look at the patches and I've found a few suboptimal things which I've fixed. Most notably I don't think we have to issue a warning when underlying device does not support FITRIM. Returning EOPNOTSUPP should be enough. And I also think that remounting the filesystem read-only or even panicking (the result of calling ext3_std_error()) is necessary when sb_issue_discard() fails for whatever

Did you meant "is NOT necessary" ? Just for clarification.

Quoted 9 lines

reason. Sure it is suspicious but we can cope just fine with that. BTW, I think ext4 might want this as well. Finally, we were missing to set the error in a few cases (e.g. when bitmap could not be loaded).

Attached is a diff with what I did and I'll repost what I currently have in my tree.

Honza

Hi,

thanks a lot for your review and fixes. I already posted the patch for ext4 (remove warning etc.) yesterday. So maybe we should get rid of the warning message completely (ext3_warning) and just let userspace handle the error and print out warning ? Otherwise diff looks good.

Thanks!

-Lukas

reviewer
#8 lore raw

Re: [PATCH 2/2] ext3: Add FITRIM handle for ext3

Quoted 28 lines · Lukas Czerner
Quoted 27 lines · Jan Kara
Quoted 26 lines · Lukas Czerner
Quoted 9 lines · Jan Kara
Quoted 6 lines · Lukas Czerner

It takes fstrim_range structure as an argument. fstrim_range is definec in the include/linux/fs.h.

After the FITRIM is done, the number of actually discarded Bytes is stored in fstrim_range.len to give the user better insight on how much storage space has been really released for wear-leveling.

Umm, why do we have to do this when FITRIM is already handled in
fs/ioctl.c? I'd expect us to just provide .trim_fs ioctl, no?

Hi,

see upstream commits:
93bb41f4f8b89ac8b4d0a734bc59634cb0a29a89
e681c047e47c0abe67bf95857f23814372793cb0

unfortunately people was not happy with generic ioctl interface for that purpose, there were concerned that it is no common enough to be included in core vfs and there is no need for new super operation since each filesystem can easily setup its own ioctl handling.

When I say people I need to clarify that it was mainly Christoph Hellwig who had objections against the former implementation and I must say that he had a point.

Quoted 8 lines
Quoted 6 lines

OK, I see. I had a fresh look at the patches and I've found a few suboptimal things which I've fixed. Most notably I don't think we have to issue a warning when underlying device does not support FITRIM. Returning EOPNOTSUPP should be enough. And I also think that remounting the filesystem read-only or even panicking (the result of calling ext3_std_error()) is necessary when sb_issue_discard() fails for whatever

Did you meant "is NOT necessary" ? Just for clarification.

Yes.

Honza

Signature · 2 lines
Jan Kara <[email protected]>
SUSE Labs, CR