ath5k: Tweak phy activate to rx start delay based on bwmode
Nick Kossifidis
maintainerPATCH 25/30 ath5k: Tweak phy activate to rx start delay based on bwmode
* Tweak phy activation -> rx delay for different bwmodes
Signed-off-by Nick Kossifidis <[email protected]>
--- drivers/net/wireless/ath/ath5k/phy.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath5k/phy.c +7 -4
@@ -3356,8 +3356,6 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,/* * On 5211+ read activation -> rx delay * and use it. -* -* TODO: Half/quarter rate support */ if (ah->ah_version !=AR5K_AR5210 ) {u32 delay;
@@ -3365,8 +3363,13 @@ int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,AR5K_PHY_RX_DELAY_M ; delay = (channel->hw_value &CHANNEL_CCK ) ? ((delay <<2 ) /22 ) : (delay /10 ); - -udelay (100 + (2 * delay)); +if (ah->ah_bwmode ==AR5K_BWMODE_10MHZ ) + delay = delay <<1 ; +if (ah->ah_bwmode ==AR5K_BWMODE_5MHZ ) + delay = delay <<2 ; +/* XXX: /2 on turbo ? Let's be safe +* for now */ +udelay (100 + delay); }else {mdelay (1 ); }