Skip to contentSkip to conversation

2.6.37-rc1: Freeze while booting on HP nx6325

regression Grzegorz Chwesewicz 2 participants 3 messages Nov 24, 2010 – Nov 25, 2010

lore
Share & tools
lore
#0 lore raw

Hi, I have a problem with 2.6.37-rc1. My HP nx6325 freezes during boot. It happens after printing lines:

[    0.298457] atiixp 0000:00:14.1: not 100% native mode: will probe
irqs later
[    0.298515]     ide0: BM-DMA at 0x7040-0x7047
[    0.298573] atiixp 0000:00:14.1: simplex device: DMA disabled
[    0.298625] ide1: DMA disabled

<Freeze>

This didn't happen in 2.6.36. I bisected between 2.6.36 and 2.6.37-rc1:

1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9 is the first bad commit commit 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9

Author: Bjorn Helgaas <[email protected]>
Date:   Tue Oct 26 15:41:54 2010 -0600

x86: allocate space within a region top-down

Request that allocate_resource() use available space from high addresses first, rather than the default of using low addresses first.

The most common place this makes a difference is when we move or assign new PCI device resources. Low addresses are generally scarce, so it's better to use high addresses when possible. This follows Windows
practice
for PCI allocation.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c42

Reverting above patch from latest linus-tree resolves problem.

My lspci:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]

02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)

02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller

02:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller

02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)

02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)

30:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)

Please CC to me, as I'm not subscribed to the list.

Signature · 3 lines
Greetings
Grzegorz Chwesewicz
mailto:[email protected]
#1 lore raw
Quoted 9 lines · Grzegorz Chwesewicz

Hi, I have a problem with 2.6.37-rc1. My HP nx6325 freezes during boot. It happens after printing lines:

[    0.298457] atiixp 0000:00:14.1: not 100% native mode: will probe
irqs later
[    0.298515]     ide0: BM-DMA at 0x7040-0x7047
[    0.298573] atiixp 0000:00:14.1: simplex device: DMA disabled
[    0.298625] ide1: DMA disabled

<Freeze>

I think this is the same problem as
https://bugzilla.kernel.org/show_bug.cgi?id=23332

If you have more of the log, that would be useful, but I doubt you do because I don't think the nx6325 has a serial port. I do have a sample of that system, so I'm hoping to learn something about it today.

Thanks for the report!

Bjorn

Quoted 83 lines

This didn't happen in 2.6.36. I bisected between 2.6.36 and 2.6.37-rc1:

1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9 is the first bad commit commit 1af3c2e45e7a641e774bbb84fa428f2f0bf2d9c9

Author: Bjorn Helgaas <[email protected]>
Date:   Tue Oct 26 15:41:54 2010 -0600

x86: allocate space within a region top-down

Request that allocate_resource() use available space from high addresses first, rather than the default of using low addresses first.

The most common place this makes a difference is when we move or assign new PCI device resources. Low addresses are generally scarce, so it's better to use high addresses when possible. This follows Windows
practice
for PCI allocation.

Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c42

Reverting above patch from latest linus-tree resolves problem.

My lspci:

00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 10) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:05.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:06.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host Controller (rev 80)
00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host Controller (rev 80)
00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82) 00:14.1 IDE interface: ATI Technologies Inc IXP SB400 IDE Controller (rev 80)
00:14.2 Audio device: ATI Technologies Inc IXP SB4x0 High Definition Audio Controller (rev 01)
00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80) 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev 80) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control

01:05.0 VGA compatible controller: ATI Technologies Inc RS482 [Radeon Xpress 200M]

02:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5788 Gigabit Ethernet (rev 03)

02:04.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller

02:04.1 FireWire (IEEE 1394): Texas Instruments PCIxx12 OHCI Compliant IEEE 1394 Host Controller

02:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)

02:04.3 SD Host controller: Texas Instruments PCIxx12 SDA Standard Compliant SD Host Controller

03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet (rev 10)

30:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)

Please CC to me, as I'm not subscribed to the list.

#2 lore raw

Bjorn Helgaas pisze:

Quoted 11 lines · Grzegorz Chwesewicz
Quoted 9 lines

Hi, I have a problem with 2.6.37-rc1. My HP nx6325 freezes during boot. It happens after printing lines:

[    0.298457] atiixp 0000:00:14.1: not 100% native mode: will probe
irqs later
[    0.298515]     ide0: BM-DMA at 0x7040-0x7047
[    0.298573] atiixp 0000:00:14.1: simplex device: DMA disabled
[    0.298625] ide1: DMA disabled

<Freeze>

Quoted 5 lines

I think this is the same problem as
https://bugzilla.kernel.org/show_bug.cgi?id=23332

If you have more of the log, that would be useful, but I doubt you do because I don't think the nx6325 has a serial port.

It doesn't have serial port, I tried with console on USB<->serial converter, but it is initialized too late to dump something.

I do have

Quoted 2 lines

a sample of that system, so I'm hoping to learn something about it today.

Signature · 3 lines
Greetings
Grzegorz Chwesewicz
[email protected]