qwt 5.2.1 failed to build here (om-gta02 , SHR, X11)
http://tinderbox.openembedded.org/packages/1087355/
Does some one else has already succeded to build qwt 5.2.1 for X11 ?
Any hint, thanks.
Sylvain (aka GarthPS)
Hi,
Quoted 4 lines · Sylvain Paré
http://tinderbox.openembedded.org/packages/1087355/
Does some one else has already succeded to build qwt 5.2.1 for X11 ?
only compile tested (angstrom-2010.x, armv6, oe head & bitbake parallel-parsing) :
NOTE: package qwt-5.2.1-r0: task do_compile: Succeeded
.../...
NOTE: package qwt-5.2.1-r0: task do_rm_work_all: Succeeded
Eric
ok thanks. does some one has a clue ?
extracted for the log :
Fatal error: can't create obj/qwt_abstract_scale_draw.o: No such file or directory
2010/11/25 Eric Bénard <[email protected]>
Quoted 21 lines
Hi,
Quoted 5 lines · Sylvain Paré
http://tinderbox.openembedded.org/packages/1087355/
Does some one else has already succeded to build qwt 5.2.1 for X11 ?
only compile tested (angstrom-2010.x, armv6, oe head & bitbake
parallel-parsing) :
NOTE: package qwt-5.2.1-r0: taskdo_compile: Succeeded .../...
NOTE: package qwt-5.2.1-r0: taskdo_rm_work_all: SucceededEric
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Quoted 6 lines · Sylvain Paré
ok thanks. does some one has a clue ?
extracted for the log :Fatal error: can't create
obj/qwt_abstract_scale_draw.o: No such file or directory
does the obj directory exist ?
Eric
I can't find any obj/ directory in SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
but I have an SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
2010/11/25 Eric Bénard <[email protected]>
Quoted 18 lines · Sylvain Paré
Quoted 8 lines
ok thanks. does some one has a clue ?
extracted for the log :Fatal error: can't create
obj/qwt_abstract_scale_draw.o: No such file or directorydoes the obj directory exist ?
Eric
_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Quoted 5 lines · Sylvain Paré
I can't find any obj/ directory in SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
but I have an SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
here is your problem.QT_LIBINFIX should be "" in your case.
Eric
Quoted 8 lines · Eric Bénard
Quoted 5 lines · Sylvain Paré
I can't find any obj/ directory in SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
but I have an SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/here is your problem.
QT_LIBINFIXshould be "" in your case.
then something likeQT_DIR_NAME = "qt4"QT_LIBINFIX = ""
is missing in qt4x11.bbclass (it's defined only in qt4e.bbclass).
Signature · 1 line
Martin 'JaMa' Jansa jabber: [email protected]
I don't have acces to OE.
Eric can you do that please ?
2010/11/25 Martin Jansa <[email protected]>
Quoted 26 lines · Eric Bénard
Quoted 3 lines · Sylvain Paré
Quoted 2 lines
I can't find any obj/ directory in
SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/
Quoted 2 lines
Quoted 2 lines
but I have an
SHR-Build/shr-unstable/tmp/work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/
Quoted 3 lines
Quoted 1 line
here is your problem.
QT_LIBINFIXshould be "" in your case.then something like
QT_DIR_NAME= "qt4"QT_LIBINFIX= ""is missing in qt4x11.bbclass (it's defined only in qt4e.bbclass).
--
Martin 'JaMa' Jansa jabber: [email protected]_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
PATCH 1/1 qt4x11: set QT_LIBINFIX and QT_DIR_NAME
this will fix the following issue with qwt 5.2.1 where obj dir is:
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/ instead of :
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj/
From: Martin Jansa <[email protected]>
--- classes/qt4x11.bbclass | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
classes/qt4x11.bbclass +3 -0
@@ -2,5 +2,8 @@ DEPENDS_prepend = "${@["qt4-x11-free ", ""][(bb.data.getVar('PN', d, 1)[:12] == inherit qmake2 +QT_DIR_NAME = "qt4" +QT_LIBINFIX = "" + # Qt4 uses atomic instructions not supported in thumb mode ARM_INSTRUCTION_SET = "arm"
Signature · 1 line
1.6.3.3
Re: [PATCH] qt4x11: set QT_LIBINFIX and QT_DIR_NAME
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Quoted 7 lines · Eric Bénard
this will fix the following issue with qwt 5.2.1 where obj dir is:
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/ instead of :
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj/From: Martin Jansa <[email protected]>
Signed-off-by Eric Bénard <[email protected]>
Quoted 9 lines
--- classes/qt4x11.bbclass | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)classes/qt4x11.bbclass +0
-0
classes/qt4x11.bbclass DEPENDS_prepend = "${@["qt4-x11-free ", ""][(bb.data.getVar('PN', d, 1)[:12] == · line 9
Quoted 8 lines
classes/qt4x11.bbclass +3
-0@@ -2,5 +2,8 @@ DEPENDS_prepend = "${@["qt4-x11-free ", ""][(bb.data.getVar('PN', d, 1)[:12] == inherit qmake2 +QT_DIR_NAME = "qt4" +QT_LIBINFIX = "" + # Qt4 uses atomic instructions not supported in thumb mode ARM_INSTRUCTION_SET = "arm"
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.5 (Darwin)
iD8DBQFM7opNMkyGM64RGpERAqO2AJ9nyr/drAT7t6LPEG1A+QyhVnWEhACgi29X l9NpDotshYsD4jtyeSSNT8s=
=3G1E
-----END PGP SIGNATURE-----
Re: [PATCH] qt4x11: set QT_LIBINFIX and QT_DIR_NAME
In reply to Eric BénardQuoted 7 lines · Eric Bénard
this will fix the following issue with qwt 5.2.1 where obj dir is:
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj${QT_LIBINFIX}/ instead of :
work/armv4t-oe-linux-gnueabi/qwt-5.2.1-r0/qwt-5.2.1/src/obj/From: Martin Jansa <[email protected]>
Signed-off-by Eric Bénard <[email protected]>
please install
Quoted 25 lines
--- classes/qt4x11.bbclass | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)classes/qt4x11.bbclass +3
-0@@ -2,5 +2,8 @@ DEPENDS_prepend = "${@["qt4-x11-free ", ""][(bb.data.getVar('PN', d, 1)[:12] == inherit qmake2 +QT_DIR_NAME = "qt4" +QT_LIBINFIX = "" + # Qt4 uses atomic instructions not supported in thumb mode ARM_INSTRUCTION_SET = "arm"Signature · 7 lines
1.6.3.3 _______________________________________________ Openembedded-devel mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Hi Sylvain,
Quoted 3 lines · Sylvain Paré
I don't have acces to OE.
Eric can you do that please ?
can you please test the patch and say if that solves your problem ?
Thanks
Eric
yes I did thoses changes
http://pastebin.com/5x9Gaxm7
and it has build successfully .
2010/11/25 Eric Bénard <[email protected]>
Quoted 19 lines
Hi Sylvain,
Quoted 4 lines · Sylvain Paré
I don't have acces to OE.
Eric can you do that please ?can you please test the patch and say if that solves your problem ?
Thanks
Eric_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
Thx Eric
2010/11/25 Sylvain Paré <[email protected]>
Quoted 27 lines
yes I did thoses changes
http://pastebin.com/5x9Gaxm7
and it has build successfully .2010/11/25 Eric Bénard <[email protected]>
Quoted 19 lines
Hi Sylvain,
Quoted 4 lines · Sylvain Paré
I don't have acces to OE.
Eric can you do that please ?can you please test the patch and say if that solves your problem ?
Thanks
Eric_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel