Skip to contentSkip to conversation

mfd: Provide pm_runtime_no_callbacks flag in cell data

PATCH In review Mark Brown 2 participants 3 messages Nov 26, 2010 – Nov 27, 2010

Subsystems (2)
lore
Share & tools
lore

Mark Brown

author
#0 lore raw

PATCH 1/2 mfd: Provide pm_runtime_no_callbacks flag in cell data

Allow MFD cells to have pm_runtime_no_callbacks() called on them during registration. This causes the runtime PM framework to ignore them, allowing use of runtime PM to suspend the device as a whole even if not all drivers for the MFD can usefully implement runtime PM. For example, RTCs are likely to run continuously regardless of the power state of the system.

---
 drivers/mfd/mfd-core.c   |    4 ++++
 include/linux/mfd/core.h |    6 ++++++
 2 files changed, 10 insertions(+), 0 deletions(-)
drivers/mfd/mfd-core.c +4 -0
index ec99f68..d83ad0f 100644
@@ -15,6 +15,7 @@
 #include <linux/platform_device.h>
 #include <linux/acpi.h>
 #include <linux/mfd/core.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
 static int mfd_add_device(struct device *parent, int id,
@@ -82,6 +83,9 @@ static int mfd_add_device(struct device *parent, int id,
 	if (ret)
 		goto fail_res;
 
+	if (cell->pm_runtime_no_callbacks)
+		pm_runtime_no_callbacks(&pdev->dev);
+
 	kfree(res);
 
 	return 0;
include/linux/mfd/core.h +6 -0
index 5582ab3..835996e 100644
@@ -47,6 +47,12 @@ struct mfd_cell {
 
 	/* don't check for resource conflicts */
 	bool			ignore_resource_conflicts;
+
+	/*
+	 * Disable runtime PM callbacks for this subdevice - see
+	 * pm_runtime_no_callbacks().
+	 */
+	bool			pm_runtime_no_callbacks;
 };
 
 extern int mfd_add_devices(struct device *parent, int id,
Signature · 1 line
1.7.1
author
#1 lore raw

PATCH 2/2 mfd: Implement runtime PM for WM8994 core driver

Allow the WM8994 to completely power off, including disabling the LDOs if they are software controlled, when it goes idle. The CODEC subdevice controls activity for the MFD as a whole.

If the GPIOs need to be used while the device is active runtime PM should be disabled for the device by machine specific code.

---
 drivers/mfd/wm8994-core.c |   46 ++++++++++++++++++++++----------------------
 1 files changed, 23 insertions(+), 23 deletions(-)
drivers/mfd/wm8994-core.c +23 -23
index 8d221ba..41233c7 100644
@@ -18,6 +18,7 @@
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/mfd/core.h>
+#include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
 #include <linux/regulator/machine.h>
 
@@ -169,8 +170,16 @@ out:
 EXPORT_SYMBOL_GPL(wm8994_set_bits);
 
 static struct mfd_cell wm8994_regulator_devs[] = {
-	{ .name = "wm8994-ldo", .id = 1 },
-	{ .name = "wm8994-ldo", .id = 2 },
+	{
+		.name = "wm8994-ldo",
+		.id = 1,
+		.pm_runtime_no_callbacks = true,
+	},
+	{
+		.name = "wm8994-ldo",
+		.id = 2,
+		.pm_runtime_no_callbacks = true,
+	},
 };
 
 static struct resource wm8994_codec_resources[] = {
@@ -200,6 +209,7 @@ static struct mfd_cell wm8994_devs[] = {
 		.name = "wm8994-gpio",
 		.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
 		.resources = wm8994_gpio_resources,
+		.pm_runtime_no_callbacks = true,
 	},
 };
 
@@ -231,7 +241,7 @@ static const char *wm8958_main_supplies[] = {
 };
 
 #ifdef CONFIG_PM
-static int wm8994_device_suspend(struct device *dev)
+static int wm8994_suspend(struct device *dev)
 {
 	struct wm8994 *wm8994 = dev_get_drvdata(dev);
 	int ret;
@@ -261,7 +271,7 @@ static int wm8994_device_suspend(struct device *dev)
 	return 0;
 }
 
-static int wm8994_device_resume(struct device *dev)
+static int wm8994_resume(struct device *dev)
 {
 	struct wm8994 *wm8994 = dev_get_drvdata(dev);
 	int ret;
@@ -471,6 +481,9 @@ static int wm8994_device_init(struct wm8994 *wm8994, int irq)
 		goto err_irq;
 	}
 
+	pm_runtime_enable(wm8994->dev);
+	pm_runtime_resume(wm8994->dev);
+
 	return 0;
 
 err_irq:
@@ -490,6 +503,7 @@ err:
 
 static void wm8994_device_exit(struct wm8994 *wm8994)
 {
+	pm_runtime_disable(wm8994->dev);
 	mfd_remove_devices(wm8994->dev);
 	wm8994_irq_exit(wm8994);
 	regulator_bulk_disable(wm8994->num_supplies,
@@ -573,21 +587,6 @@ static int wm8994_i2c_remove(struct i2c_client *i2c)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int wm8994_i2c_suspend(struct i2c_client *i2c, pm_message_t state)
-{
-	return wm8994_device_suspend(&i2c->dev);
-}
-
-static int wm8994_i2c_resume(struct i2c_client *i2c)
-{
-	return wm8994_device_resume(&i2c->dev);
-}
-#else
-#define wm8994_i2c_suspend NULL
-#define wm8994_i2c_resume NULL
-#endif
-
 static const struct i2c_device_id wm8994_i2c_id[] = {
 	{ "wm8994", WM8994 },
 	{ "wm8958", WM8958 },
@@ -595,15 +594,16 @@ static const struct i2c_device_id wm8994_i2c_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, wm8994_i2c_id);
 
+UNIVERSAL_DEV_PM_OPS(wm8994_pm_ops, wm8994_suspend, wm8994_resume, NULL);
+
 static struct i2c_driver wm8994_i2c_driver = {
 	.driver = {
-		   .name = "wm8994",
-		   .owner = THIS_MODULE,
+		.name = "wm8994",
+		.owner = THIS_MODULE,
+		.pm = &wm8994_pm_ops,
 	},
 	.probe = wm8994_i2c_probe,
 	.remove = wm8994_i2c_remove,
-	.suspend = wm8994_i2c_suspend,
-	.resume = wm8994_i2c_resume,
 	.id_table = wm8994_i2c_id,
 };
 
Signature · 1 line
1.7.1
#2 lore raw
In reply to Mark Brown

Hi Mark,

Quoted 6 lines · Mark Brown

Allow MFD cells to have pm_runtime_no_callbacks() called on them during registration. This causes the runtime PM framework to ignore them, allowing use of runtime PM to suspend the device as a whole even if not all drivers for the MFD can usefully implement runtime PM. For example, RTCs are likely to run continuously regardless of the power state of the system.

Makes sense, both patches applied.

Cheers,
Samuel.

Signature · 2 lines
Intel Open Source Technology Centre
http://oss.intel.com/