Skip to contentSkip to conversation

pch_gbe dreiver: chang author

PATCH Applied Toshiharu Okada 2 participants 2 messages Nov 22, 2010 – Nov 29, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/2 pch_gbe dreiver: chang author

This driver's AUTHOR was changed to "Toshiharu Okada" from "Masayuki Ohtake". I update the Kconfig, renamed "Topcliff" to "EG20T".

---
 drivers/net/Kconfig                |    6 +++---
 drivers/net/pch_gbe/pch_gbe_main.c |    6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)
drivers/net/Kconfig +3 -3
index f6668cd..a445a04 100644
@@ -2543,10 +2543,10 @@ config PCH_GBE
 	depends on PCI
 	select MII
 	---help---
-	  This is a gigabit ethernet driver for Topcliff PCH.
-	  Topcliff PCH is the platform controller hub that is used in Intel's
+	  This is a gigabit ethernet driver for EG20T PCH.
+	  EG20T PCH is the platform controller hub that is used in Intel's
 	  general embedded platform.
-	  Topcliff PCH has Gigabit Ethernet interface.
+	  EG20T PCH has Gigabit Ethernet interface.
 	  Using this interface, it is able to access system devices connected
 	  to Gigabit Ethernet.
 	  This driver enables Gigabit Ethernet function.
drivers/net/pch_gbe/pch_gbe_main.c +3 -3
index 472056b..03a1d28 100644
@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
  *
  * This code was derived from the Intel e1000e Linux driver.
  *
@@ -2464,8 +2464,8 @@ static void __exit pch_gbe_exit_module(void)
 module_init(pch_gbe_init_module);
 module_exit(pch_gbe_exit_module);
 
-MODULE_DESCRIPTION("OKI semiconductor PCH Gigabit ethernet Driver");
-MODULE_AUTHOR("OKI semiconductor, <[email protected]>");
+MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <[email protected]>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);
Signature · 1 line
1.6.2.5