Skip to contentSkip to conversation

be2net: FW init cmd fix for lancer

PATCH Applied Sathya Perla 2 participants 2 messages Dec 1, 2010 – Dec 6, 2010

Subsystems (2)
Networking Network drivers
lore
Share & tools
lore

Sathya Perla

author
#0 lore raw

PATCH 2/3 be2net: FW init cmd fix for lancer

Lancer can use the same pattern as BE to indicate a driver load to the FW.

Signed-off-by Padmanabh Ratnakar <[email protected]>
Signed-off-by Sathya Perla <[email protected]>
---
 drivers/net/benet/be_cmds.c |   27 ++++++++-------------------
 1 files changed, 8 insertions(+), 19 deletions(-)
drivers/net/benet/be_cmds.c +8 -19
index 3865b2b..31c5ddc 100644
@@ -470,25 +470,14 @@ int be_cmd_fw_init(struct be_adapter *adapter)
 	spin_lock(&adapter->mbox_lock);
 
 	wrb = (u8 *)wrb_from_mbox(adapter);
-	if (lancer_chip(adapter)) {
-		*wrb++ = 0xFF;
-		*wrb++ = 0x34;
-		*wrb++ = 0x12;
-		*wrb++ = 0xFF;
-		*wrb++ = 0xFF;
-		*wrb++ = 0x78;
-		*wrb++ = 0x56;
-		*wrb = 0xFF;
-	} else {
-		*wrb++ = 0xFF;
-		*wrb++ = 0x12;
-		*wrb++ = 0x34;
-		*wrb++ = 0xFF;
-		*wrb++ = 0xFF;
-		*wrb++ = 0x56;
-		*wrb++ = 0x78;
-		*wrb = 0xFF;
-	}
+	*wrb++ = 0xFF;
+	*wrb++ = 0x12;
+	*wrb++ = 0x34;
+	*wrb++ = 0xFF;
+	*wrb++ = 0xFF;
+	*wrb++ = 0x56;
+	*wrb++ = 0x78;
+	*wrb = 0xFF;
 
 	status = be_mbox_notify_wait(adapter);
Signature · 1 line
1.6.5.2