Skip to contentSkip to conversation

USB fixes for .37-rc4

PATCH New Greg KH 1 participant 1 message Dec 2, 2010

lore
Share & tools
lore

Greg KH

author
#0 lore raw

PATCH 1/1 USB fixes for .37-rc4

Here are a number of USB patches for your .37-rc4 tree.

The largest here is some xhci suspend/resume fixes that have been reported, and tested that they fix the issues.

Also, some musb fixes, as well as a variety of other minor stuff.

Please pull from:
master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6.git/ usb-linus

All of these patches have been in the linux-next and mm trees for a while.

The full patches will be sent to the linux-usb mailing list, if anyone wants to see them.

thanks,

greg k-h

------------

 drivers/usb/core/hcd.c            |    2 +
 drivers/usb/host/ehci-pci.c       |   12 +++
 drivers/usb/host/xhci-hub.c       |    7 ++
 drivers/usb/host/xhci-mem.c       |  164 +++++++++++++++++++++++++++++++++++++
 drivers/usb/host/xhci.c           |   18 ++++
 drivers/usb/host/xhci.h           |   26 ++++++
 drivers/usb/misc/yurex.c          |    1 +
 drivers/usb/musb/musb_core.c      |    3 +
 drivers/usb/musb/musb_gadget.c    |  124 +++++++++++++++++++---------
 drivers/usb/serial/ftdi_sio.c     |    2 +
 drivers/usb/serial/ftdi_sio_ids.h |    4 +
 drivers/usb/serial/usb-serial.c   |    3 +
 include/linux/usb.h               |    4 +
 13 files changed, 332 insertions(+), 38 deletions(-)

---------------

Ajay Kumar Gupta (1):
usb: musb: gadget: fix compilation warning

Alan Stern (1):
USB: fix autosuspend bug in usb-serial

Anand Gadiyar (1):
usb: musb: do not use dma for control transfers

Brian J. Tarricone (1):
USB: ehci: disable LPM and PPCD for nVidia MCP89 chips

Hema Kalliguddi (1):
usb: musb: unmap dma buffer when switching to PIO

Jacques Viviers (1):
USB: serial: ftdi_sio: Vardaan USB RS422/485 converter PID added

Michael Stuermer (1):
USB: ftdi_sio: Add ID for RT Systems USB-29B radio cable

Ming Lei (1):
usb: musb: clear RXCSR_AUTOCLEAR before PIO read

Paul Zimmerman (1):
xhci: Fix reset-device and configure-endpoint commands

Sarah Sharp (2):
xhci: Setup array of USB 2.0 and USB 3.0 ports.
xhci: Don't let the USB core disable SuperSpeed ports.

Tomoki Sekiyama (1):
USB: yurex: add .llseek fop to file_operations