Skip to contentSkip to conversation

staging: tidspbridge: 2.6.37-rcX fixes

PATCH In review Omar Ramirez Luna 3 participants 5 messages Nov 11, 2010 – Dec 2, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover staging: tidspbridge: 2.6.37-rcX fixes

Hi Greg,

Please consider the following patch set for tidspbridge driver in staging tree, the following has been tested on an omap3430 based board
+ gst-dsp environment. Many thanks to Felipe Contreras for piling this up, as I'm just propagating his patches.

First two patches:
1. omap: dsp: remove shm from normal memory
2. staging: tidspbridge: hardcode SCM macros while fix is upstreamed

Resolve a couple of build breaks due to adaptations for memblock and SCM layer.

(2) Is meant as a temporary fix, until the patches to fix this (currently in review) are upstreamed. [1]

The rest of the series, is the revert of iommu migration changes. These are needed because, without modifications made to iommu module, they do not work; these modifications (on iommu code) didn't make it for the previous merge window either.

I will avoid posting the reverts (unless required), they can be found (along with the two patches of this series) at:

git://dev.omapzoom.org/pub/scm/tidspbridge/kernel-dspbridge.git

	tidspbridge-2.6.37-rc1

Felipe Contreras (14):
omap: dsp: remove shm from normal memory
staging: tidspbridge: hardcode SCM macros while fix is upstreamed

Revert "staging: tidspbridge - update Kconfig to select IOMMU module" Revert "staging: tidspbridge - remove dmm custom module" Revert "staging: tidspbridge - deprecate reserve/unreserve_memory
funtions"
Revert "staging: tidspbridge - remove reserved memory clean up" Revert "staging: tidspbridge: remove dw_dmmu_base from cfg_hostres
struct"
Revert "staging: tidspbridge - move all iommu related code to a new
file"
Revert "staging: tidspbridge - remove hw directory"
Revert "staging: tidspbridge - fix mmufault support" Revert "staging: tidspbridge - remove custom mmu code from

    tiomap3430.c"
  Revert "staging: tidspbridge - rename bridge_brd_mem_map/unmap to a
    proper name"
  Revert "staging: tidspbridge - move shared memory iommu maps to
    tiomap3430.c"

Revert "staging: tidspbridge: replace iommu custom for opensource
implementation"

 arch/arm/plat-omap/devices.c                       |    4 +-
 drivers/staging/tidspbridge/Kconfig                |    1 -
 drivers/staging/tidspbridge/Makefile               |    7 +-
 drivers/staging/tidspbridge/core/_deh.h            |    5 +-
 drivers/staging/tidspbridge/core/_tiomap.h         |   19 +-
 drivers/staging/tidspbridge/core/dsp-mmu.c         |  317 ------
 drivers/staging/tidspbridge/core/io_sm.c           |  180 +++-
 drivers/staging/tidspbridge/core/tiomap3430.c      | 1083 ++++++++++++++++++--
 drivers/staging/tidspbridge/core/tiomap3430_pwr.c  |    4 +
 drivers/staging/tidspbridge/core/tiomap_io.c       |   17 +-
 drivers/staging/tidspbridge/core/ue_deh.c          |  115 ++-
 drivers/staging/tidspbridge/hw/EasiGlobal.h        |   41 +
 drivers/staging/tidspbridge/hw/MMUAccInt.h         |   76 ++
 drivers/staging/tidspbridge/hw/MMURegAcM.h         |  225 ++++
 drivers/staging/tidspbridge/hw/hw_defs.h           |   58 ++
 drivers/staging/tidspbridge/hw/hw_mmu.c            |  562 ++++++++++
 drivers/staging/tidspbridge/hw/hw_mmu.h            |  163 +++
 .../tidspbridge/include/dspbridge/cfgdefs.h        |    1 +
 .../staging/tidspbridge/include/dspbridge/dev.h    |   24 +
 .../staging/tidspbridge/include/dspbridge/dmm.h    |   75 ++
 .../staging/tidspbridge/include/dspbridge/drv.h    |   10 +
 .../tidspbridge/include/dspbridge/dsp-mmu.h        |   67 --
 .../tidspbridge/include/dspbridge/dspdefs.h        |   44 +
 .../tidspbridge/include/dspbridge/dspioctl.h       |    7 +
 .../staging/tidspbridge/include/dspbridge/proc.h   |   46 +
 drivers/staging/tidspbridge/pmgr/dev.c             |   63 ++-
 drivers/staging/tidspbridge/pmgr/dmm.c             |  533 ++++++++++
 drivers/staging/tidspbridge/pmgr/dspapi.c          |   34 +-
 drivers/staging/tidspbridge/rmgr/drv.c             |   15 +
 drivers/staging/tidspbridge/rmgr/drv_interface.c   |    2 +
 drivers/staging/tidspbridge/rmgr/node.c            |   48 +-
 drivers/staging/tidspbridge/rmgr/proc.c            |  197 ++++-
 32 files changed, 3471 insertions(+), 572 deletions(-)
 delete mode 100644 drivers/staging/tidspbridge/core/dsp-mmu.c
 create mode 100644 drivers/staging/tidspbridge/hw/EasiGlobal.h
 create mode 100644 drivers/staging/tidspbridge/hw/MMUAccInt.h
 create mode 100644 drivers/staging/tidspbridge/hw/MMURegAcM.h
 create mode 100644 drivers/staging/tidspbridge/hw/hw_defs.h
 create mode 100644 drivers/staging/tidspbridge/hw/hw_mmu.c
 create mode 100644 drivers/staging/tidspbridge/hw/hw_mmu.h
 create mode 100644 drivers/staging/tidspbridge/include/dspbridge/dmm.h
 delete mode 100644 drivers/staging/tidspbridge/include/dspbridge/dsp-mmu.h
 create mode 100644 drivers/staging/tidspbridge/pmgr/dmm.c
#1 lore raw

PATCH 1/2 omap: dsp: remove shm from normal memory

From: Felipe Contreras <[email protected]>

Also, don't be picky about the location, which incidentally fixes the build since MEMBLOCK_REAL_LIMIT is gone on 2.6.37.

arch/arm/plat-omap/devices.c: In function 'omap_dsp_reserve_sdram_memblock':
arch/arm/plat-omap/devices.c:287: error: 'MEMBLOCK_REAL_LIMIT'
undeclared (first use in this function)

---
 arch/arm/plat-omap/devices.c |    4 +++-
 1 files changed, 3 insertions(+), 1 deletions(-)
arch/arm/plat-omap/devices.c +3 -1
index 6f42a18..fc81912 100644
@@ -284,12 +284,14 @@ void __init omap_dsp_reserve_sdram_memblock(void)
 	if (!size)
 		return;
 
-	paddr = __memblock_alloc_base(size, SZ_1M, MEMBLOCK_REAL_LIMIT);
+	paddr = memblock_alloc(size, SZ_1M);
 	if (!paddr) {
 		pr_err("%s: failed to reserve %x bytes\n",
 				__func__, size);
 		return;
 	}
+	memblock_free(paddr, size);
+	memblock_remove(paddr, size);
 
 	omap_dsp_phys_mempool_base = paddr;
 }
Signature · 1 line
1.7.1
#2 lore raw

Re: [PATCH 01/02] omap: dsp: remove shm from normal memory

Quoted 4 lines · Omar Ramirez Luna

From: Felipe Contreras <[email protected]>

Also, don't be picky about the location, which incidentally fixes the build since MEMBLOCK_REAL_LIMIT is gone on 2.6.37.

That comment is wrong. memblock_alloc() is still as picky as the original.

phys_addr_t __init memblock_alloc(phys_addr_t size, phys_addr_t align)

{
        return memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ACCESSIBLE);
}
        /* Pump up max_addr */
        if (end == MEMBLOCK_ALLOC_ACCESSIBLE)
                end = memblock.current_limit;

and current_limit is initialized to what was MEMBLOCK_REAL_LIMIT. So, memblock_alloc() will always allocate from lowmem.

#3 lore raw

PATCH 2/2 staging: tidspbridge: hardcode SCM macros while fix is upstreamed

In reply to Omar Ramirez Luna

From: Felipe Contreras <[email protected]>

On 2.6.37-rc1, omap platform internals for SCM have changed, so the build is broken again.

drivers/staging/tidspbridge/core/tiomap3430.c:26:
fatal error: plat/control.h: No such file or directory

This is a totally ugly layer violation, but needed until omap_ctrl_set_dsp_boot*() are provided.

---
 drivers/staging/tidspbridge/core/tiomap3430.c |   14 +++++++++++++-
 1 files changed, 13 insertions(+), 1 deletions(-)
drivers/staging/tidspbridge/core/tiomap3430.c +13 -1
index f22bc12..d302e30 100644
@@ -23,7 +23,6 @@
 #include <dspbridge/host_os.h>
 #include <linux/mm.h>
 #include <linux/mmzone.h>
-#include <plat/control.h>
 
 /*  ----------------------------------- DSP/BIOS Bridge */
 #include <dspbridge/dbdefs.h>
@@ -68,6 +67,19 @@
 #define OMAP3_IVA2_BOOTADDR_MASK 0xFFFFFC00
 #define PAGES_II_LVL_TABLE   512
 
+/*
+ * This is a totally ugly layer violation, but needed until
+ * omap_ctrl_set_dsp_boot*() are provided.
+ */
+#define OMAP3_IVA2_BOOTMOD_IDLE 1
+#define OMAP2_CONTROL_GENERAL 0x270
+#define OMAP343X_CONTROL_IVA2_BOOTADDR (OMAP2_CONTROL_GENERAL + 0x0190)
+#define OMAP343X_CONTROL_IVA2_BOOTMOD (OMAP2_CONTROL_GENERAL + 0x0194)
+
+#define OMAP343X_CTRL_REGADDR(reg) \
+	OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+
+
 /* Forward Declarations: */
 static int bridge_brd_monitor(struct bridge_dev_context *dev_ctxt);
 static int bridge_brd_read(struct bridge_dev_context *dev_ctxt,
Signature · 1 line
1.7.1
#4 lore raw
In reply to Omar Ramirez Luna
Quoted 22 lines · Omar Ramirez Luna

Hi Greg,

Please consider the following patch set for tidspbridge driver in staging tree, the following has been tested on an omap3430 based board
+ gst-dsp environment. Many thanks to Felipe Contreras for piling this up, as I'm just propagating his patches.

First two patches:
1. omap: dsp: remove shm from normal memory
2. staging: tidspbridge: hardcode SCM macros while fix is upstreamed

Resolve a couple of build breaks due to adaptations for memblock and SCM layer.

(2) Is meant as a temporary fix, until the patches to fix this (currently in review) are upstreamed. [1]

The rest of the series, is the revert of iommu migration changes. These are needed because, without modifications made to iommu module, they do not work; these modifications (on iommu code) didn't make it for the previous merge window either.

Quoted 5 lines

I will avoid posting the reverts (unless required), they can be found (along with the two patches of this series) at:

git://dev.omapzoom.org/pub/scm/tidspbridge/kernel-dspbridge.git

	tidspbridge-2.6.37-rc1

I've pulled from this tree and pushed it out to the staging-linus branch to get sent to Linus before .37 is released.

thanks,

greg k-h