auto update from NAND flash
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi all,
I have a MPC8572 PowerPC board , with jffs2 filesystem on the NAND falsh. I have formatted the falsh in 5 partitions for dtb, uboot.bin, uImage, rootfs.jffs2 and a spare parttion.
I want to do a auto update for the uImage and rootfs.jffs2 by using he spare aparttion in the flash.
i.e. I will place the latest uImage/ root.jffs2 file in the spare parttion and while reboot the uboot should flash the latest images and boot
I know there is auto update through tftp , any idea throug h NAND falsh.
Thanks.
Signature · 12 lines
Cheeers Deebul !!!!!! -- Cheeers Deebul !!!!!!
Dear deebul nair,
Quoted 11 lines · In message <[email protected]> you…
I have a MPC8572 PowerPC board , with jffs2 filesystem on the NAND falsh. I have formatted the falsh in 5 partitions for dtb, uboot.bin, uImage, rootfs.jffs2 and a spare parttion.
I want to do a auto update for the uImage and rootfs.jffs2 by using he spare aparttion in the flash.
i.e. I will place the latest uImage/ root.jffs2 file in the spare parttion and while reboot the uboot should flash the latest images and bootI know there is auto update through tftp , any idea throug h NAND falsh.
Well, replace the "tftp" command by a "nand read". Where exactly is your problem?
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
I don't know if it's what you want, but it's what you get. :-)
- Larry Wall in <[email protected]>