Pull request: u-boot-arm
Subsystems (4)
The following changes since commit 6163f5b4c8873848ed023054bc401727301ea537:
malloc: Fix issue with calloc memory possibly being non-zero (2010-11-17 22:06:40 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.git master
Albert Aribaud (2):
arm: add ELF relocation support to rest of cpus
arm1176: bugfix: fix start.S for ELF relocation
Eric Cooper (1):
Seagate FreeAgent DockStar support
Grazvydas Ignotas (3):
OMAP3: pandora: fix relocation and init memory
OMAP3: remove unused config macros
OMAP3: pandora: update config for production
Matthias Weisser (1):
Makefile: Fix build with USE_PRIVATE_LIBGCC
Nick Thompson (1):
da830: fixup ARM relocation support
Nishanth Menon (2):
mmc: omap: timeout counter fix
omap4: board: change global data pointer to file scope
Sekhar Nori (2):
DA850 EVM: add information regarding DA850 in README.davinci DA850 EVM: passing maximum clock rate information to kernel
Steve Sakoman (1):
OMAP4: Panda: Disable CMD_NFS
Wolfgang Denk (1):
DaVinci: remove bogus DEF_BOOTM definition
MAINTAINERS | 4 + Makefile | 2 +- arch/arm/cpu/arm1176/start.S | 47 +++------- arch/arm/cpu/arm720t/start.S | 119 ++++++++++++----------- arch/arm/cpu/arm720t/u-boot.lds | 39 +++++--- arch/arm/cpu/arm920t/start.S | 125 +++++++++++++------------ arch/arm/cpu/arm920t/u-boot.lds | 38 +++++--- arch/arm/cpu/arm925t/start.S | 127 +++++++++++++------------ arch/arm/cpu/arm925t/u-boot.lds | 38 +++++--- arch/arm/cpu/arm946es/start.S | 123 ++++++++++++----------- arch/arm/cpu/arm946es/u-boot.lds | 38 +++++--- arch/arm/cpu/arm_intcm/start.S | 127 +++++++++++++----------- arch/arm/cpu/arm_intcm/u-boot.lds | 38 +++++--- arch/arm/cpu/armv7/omap4/board.c | 3 +- arch/arm/cpu/ixp/start.S | 118 ++++++++++++----------- arch/arm/cpu/ixp/u-boot.lds | 38 +++++--- arch/arm/cpu/lh7a40x/start.S | 119 ++++++++++++----------- arch/arm/cpu/lh7a40x/u-boot.lds | 38 +++++--- arch/arm/cpu/s3c44b0/start.S | 131 ++++++++++++-------------- arch/arm/cpu/s3c44b0/u-boot.lds | 38 +++++--- arch/arm/cpu/sa1100/start.S | 119 ++++++++++++----------- arch/arm/cpu/sa1100/u-boot.lds | 38 +++++--- board/Seagate/dockstar/Makefile | 54 +++++++++++ board/Seagate/dockstar/dockstar.c | 181 +++++++++++++++++++++++++++++++++++ board/Seagate/dockstar/dockstar.h | 44 +++++++++ board/Seagate/dockstar/kwbimage.cfg | 165 +++++++++++++++++++++++++++++++ board/davinci/da8xxevm/da850evm.c | 33 +++++++ board/pandora/config.mk | 33 ------- boards.cfg | 1 + doc/README.davinci | 25 +++++ drivers/mmc/omap_hsmmc.c | 107 ++++++++++++++++----- include/configs/da830evm.h | 11 ++- include/configs/da850evm.h | 2 +- include/configs/davinci_dvevm.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/dockstar.h | 125 ++++++++++++++++++++++++ include/configs/omap3_beagle.h | 18 ---- include/configs/omap3_evm.h | 18 ---- include/configs/omap3_overo.h | 18 ---- include/configs/omap3_pandora.h | 117 ++++++++++------------- include/configs/omap3_sdp3430.h | 7 -- include/configs/omap3_zoom1.h | 18 ---- include/configs/omap3_zoom2.h | 10 -- include/configs/omap4_panda.h | 1 + include/configs/tnetv107x_evm.h | 1 - 45 files changed, 1577 insertions(+), 921 deletions(-) create mode 100644 board/Seagate/dockstar/Makefile create mode 100644 board/Seagate/dockstar/dockstar.c create mode 100644 board/Seagate/dockstar/dockstar.h create mode 100644 board/Seagate/dockstar/kwbimage.cfg delete mode 100644 board/pandora/config.mk create mode 100644 include/configs/dockstar.h
Best regards,
Wolfgang Denk
Signature · 10 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Obviously, a man's judgement cannot be better than the information on which he has based it. Give him the truth and he may still go wrong when he has the chance to be right, but give him no news or present him only with distorted and incomplete data, with ignorant, sloppy or biased reporting, with propaganda and deliberate falsehoods, and you destroy his whole reasoning processes, and make him something less than a man. - Arthur Hays Sulzberger
Wolfgang Denk
AppliedQuoted 83 lines · In message <[email protected]> you wrote:
The following changes since commit
6163f5b4c8873848ed023054bc401727301ea537:malloc: Fix issue with calloc memory possibly being non-zero (2010-11-17 22:06:40 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.gitmasterAlbert Aribaud (2):
arm: add ELF relocation support to rest of cpus
arm1176: bugfix: fixstart.Sfor ELF relocationEric Cooper (1):
Seagate FreeAgent DockStar supportGrazvydas Ignotas (3):
OMAP3: pandora: fix relocation and init memory
OMAP3: remove unused config macros
OMAP3: pandora: update config for productionMatthias Weisser (1):
Makefile: Fix build withUSE_PRIVATE_LIBGCCNick Thompson (1):
da830: fixup ARM relocation supportNishanth Menon (2):
mmc: omap: timeout counter fix
omap4: board: change global data pointer to file scopeSekhar Nori (2):
DA850 EVM: add information regarding DA850 in README.davinci DA850 EVM: passing maximum clock rate information to kernelSteve Sakoman (1):
OMAP4: Panda: DisableCMD_NFSWolfgang Denk (1):
DaVinci: remove bogusDEF_BOOTMdefinitionMAINTAINERS | 4 + Makefile | 2 +- arch/arm/cpu/arm1176/start.S | 47 +++------- arch/arm/cpu/arm720t/start.S | 119 ++++++++++++----------- arch/arm/cpu/arm720t/u-boot.lds | 39 +++++--- arch/arm/cpu/arm920t/start.S | 125 +++++++++++++------------ arch/arm/cpu/arm920t/u-boot.lds | 38 +++++--- arch/arm/cpu/arm925t/start.S | 127 +++++++++++++------------ arch/arm/cpu/arm925t/u-boot.lds | 38 +++++--- arch/arm/cpu/arm946es/start.S | 123 ++++++++++++----------- arch/arm/cpu/arm946es/u-boot.lds | 38 +++++--- arch/arm/cpu/arm_intcm/start.S | 127 +++++++++++++----------- arch/arm/cpu/arm_intcm/u-boot.lds | 38 +++++--- arch/arm/cpu/armv7/omap4/board.c | 3 +- arch/arm/cpu/ixp/start.S | 118 ++++++++++++----------- arch/arm/cpu/ixp/u-boot.lds | 38 +++++--- arch/arm/cpu/lh7a40x/start.S | 119 ++++++++++++----------- arch/arm/cpu/lh7a40x/u-boot.lds | 38 +++++--- arch/arm/cpu/s3c44b0/start.S | 131 ++++++++++++-------------- arch/arm/cpu/s3c44b0/u-boot.lds | 38 +++++--- arch/arm/cpu/sa1100/start.S | 119 ++++++++++++----------- arch/arm/cpu/sa1100/u-boot.lds | 38 +++++--- board/Seagate/dockstar/Makefile | 54 +++++++++++ board/Seagate/dockstar/dockstar.c | 181 +++++++++++++++++++++++++++++++++++ board/Seagate/dockstar/dockstar.h | 44 +++++++++ board/Seagate/dockstar/kwbimage.cfg | 165 +++++++++++++++++++++++++++++++ board/davinci/da8xxevm/da850evm.c | 33 +++++++ board/pandora/config.mk | 33 ------- boards.cfg | 1 + doc/README.davinci | 25 +++++ drivers/mmc/omap_hsmmc.c | 107 ++++++++++++++++----- include/configs/da830evm.h | 11 ++- include/configs/da850evm.h | 2 +- include/configs/davinci_dvevm.h | 1 - include/configs/davinci_sonata.h | 1 - include/configs/dockstar.h | 125 ++++++++++++++++++++++++ include/configs/omap3_beagle.h | 18 ---- include/configs/omap3_evm.h | 18 ---- include/configs/omap3_overo.h | 18 ---- include/configs/omap3_pandora.h | 117 ++++++++++------------- include/configs/omap3_sdp3430.h | 7 -- include/configs/omap3_zoom1.h | 18 ---- include/configs/omap3_zoom2.h | 10 -- include/configs/omap4_panda.h | 1 +
Quoted 8 lines
include/configs/tnetv107x_evm.h | 1 - 45 files changed, 1577 insertions(+), 921 deletions(-) create mode 100644 board/Seagate/dockstar/Makefile create mode 100644 board/Seagate/dockstar/dockstar.c create mode 100644 board/Seagate/dockstar/dockstar.h create mode 100644 board/Seagate/dockstar/kwbimage.cfg delete mode 100644 board/pandora/config.mk create mode 100644 include/configs/dockstar.h
Applied.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de If at first you don't succeed, you are running about average.
Dirk Behme
AppliedQuoted 7 lines · Wolfgang Denk
Quoted 6 lines · In message<[email protected]> you wrote:
The following changes since commit
6163f5b4c8873848ed023054bc401727301ea537:malloc: Fix issue with calloc memory possibly being non-zero (2010-11-17 22:06:40 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.gitmaster
...
Quoted 2 lines
Applied.
Doing a './MAKEALL ARMV7' on the recent master (d4752d5d2...) doesn't look nice [2].
The following configs build fine:
igep0020
mx51evkomap3_beagleomap3_overoomap3_pandoraomap4_panda
The following boards fail to build:
am3517_evm boardca9x4_ct_vxp
devkit8000
igep0030omap3_evmomap3_sdp3430omap3_zoom1omap3_zoom2omap4_sdp4430s5p_goni
smdkc100
I applied [1] to fix a beagle warning.
Are there any other pending patches to fix the compilation of the failing boards?
Thanks
Dirk
[1] http://patchwork.ozlabs.org/patch/72453/
[2] > ./MAKEALL ARMV7
Configuring for am3517_evm board...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring for ca9x4_ct_vxp board...
syslib.c:26:32: error: asm/arch/sys_proto.h: No such file or directory
make[1]: *** No rule to build the target ?.depend?,
needed from ?_depend?. End.
syslib.c:26:32: error: asm/arch/sys_proto.h: No such file or directory
make[1]: *** [syslib.o] Error 1
make: *** [arch/arm/cpu/armv7/libarmv7.o] Error 2
size: './u-boot': No such file
Configuring for devkit8000 board...start.S: Assembler messages:
start.S:144: Error: constant expression expected -- `ldr
sp,=((0x4020FFFC-CONFIG_SYS_GBL_DATA_SIZE))'
make[1]: *** [start.o] Error 1
make: *** [arch/arm/cpu/armv7/start.o] Error 2
size: './u-boot': No such file
Configuring for igep0020 board...
text data bss dec hex filename
219538 7768 214536 441842 6bdf2 ./u-boot
Configuring for igep0030 board...net/libnet.o: In function `rpc_req':u-boot.git/net/nfs.c:193: undefined reference to `NetEthHdrSize'u-boot.git/net/nfs.c:202: undefined reference to `NetSendUDPPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetTxPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetServerEther'net/libnet.o: In function `NfsStart':u-boot.git/net/nfs.c:741: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:742: undefined reference to `NetSetHandler'u-boot.git/net/nfs.c:754: undefined reference to `BootFile'u-boot.git/net/nfs.c:754: undefined reference to `NetServerIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurGatewayIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurSubnetMask'u-boot.git/net/nfs.c:754: undefined reference to `NetBootFileSize'u-boot.git/net/nfs.c:754: undefined reference to `NetServerEther'net/libnet.o: In function `nfs_read_reply':u-boot.git/net/nfs.c:563: undefined reference to `NetBootFileXferSize'net/libnet.o: In function `NfsHandler':u-boot.git/net/nfs.c:656: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:668: undefined reference to `NetState'net/libnet.o: In function `NfsTimeout':u-boot.git/net/nfs.c:574: undefined reference to `NetStartAgain'u-boot.git/net/nfs.c:577: undefined reference to `NetSetTimeout'
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12507 /bin/sh: line 1: 8055 Segmentation fault arm-none-linux-gnueabi-ld
-Bstatic -T u-boot.lds -pie -Ttext 0x80008000 $UNDEF_SYMarch/arm/cpu/armv7/start.o --start-group lib/libgeneric.olib/lzma/liblzma.o lib/lzo/liblzo.o arch/arm/cpu/armv7/libarmv7.oarch/arm/cpu/armv7/omap3/libomap3.o arch/arm/lib/libarm.ofs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.ofs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.ofs/yaffs2/libyaffs2.o fs/ubifs/libubifs.o net/libnet.o disk/libdisk.odrivers/bios_emulator/libatibiosemu.o drivers/block/libblock.odrivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.odrivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.odrivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.odrivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.odrivers/mtd/ubi/libubi.o drivers/mtd/spi/libspi_flash.odrivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.odrivers/pcmcia/libpcmcia.o drivers/power/libpower.odrivers/spi/libspi.o drivers/rtc/librtc.o drivers/serial/libserial.odrivers/twserial/libtws.o drivers/usb/gadget/libusb_gadget.odrivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.odrivers/usb/phy/libusb_phy.o drivers/video/libvideo.odrivers/watchdog/libwatchdog.o common/libcommon.o lib/libfdt/libfdt.oapi/libapi.o post/libpost.oarch/arm/cpu/armv7/omap-common/libomap-common.oboard/isee/igep0030/libigep0030.o --end-groupu-boot.git/arch/arm/lib/eabi_compat.o -L /opt/codesourcery/arm-none-linux-gnueabi/arm-2009q1/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3
-lgcc -Map u-boot.map -o u-boot
make: *** [u-boot] Error 139
size: ./u-boot: File format not recognized
Configuring for mx51evk board...
text data bss dec hex filename
159945 6504 216928 383377 5d991 ./u-boot
Configuring for omap3_beagle board...
text data bss dec hex filename
249978 11288 203700 464966 71846 ./u-boot
Configuring for omap3_overo board...
text data bss dec hex filename
216254 10836 210628 437718 6add6 ./u-boot
Configuring for omap3_evm board...start.S: Assembler messages:
start.S:144: Error: constant expression expected -- `ldr
sp,=((0x4020FFFC-CONFIG_SYS_GBL_DATA_SIZE))'
make[1]: *** [start.o] Error 1
make: *** [arch/arm/cpu/armv7/start.o] Error 2
size: './u-boot': No such file
Configuring for omap3_pandora board...
text data bss dec hex filename
326528 10480 205116 542124 845ac ./u-boot
Configuring for omap3_sdp3430 board...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring for omap3_zoom1 board...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring for omap3_zoom2 board...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring for omap4_panda board...
text data bss dec hex filename
147402 5892 201256 354550 568f6 ./u-boot
Configuring for omap4_sdp4430 board...net/libnet.o: In function `rpc_req':u-boot.git/net/nfs.c:193: undefined reference to `NetEthHdrSize'u-boot.git/net/nfs.c:202: undefined reference to `NetSendUDPPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetTxPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetServerEther'net/libnet.o: In function `NfsStart':u-boot.git/net/nfs.c:741: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:742: undefined reference to `NetSetHandler'u-boot.git/net/nfs.c:754: undefined reference to `BootFile'u-boot.git/net/nfs.c:754: undefined reference to `NetServerIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurGatewayIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurSubnetMask'u-boot.git/net/nfs.c:754: undefined reference to `NetBootFileSize'u-boot.git/net/nfs.c:754: undefined reference to `NetServerEther'net/libnet.o: In function `nfs_read_reply':u-boot.git/net/nfs.c:563: undefined reference to `NetBootFileXferSize'net/libnet.o: In function `NfsHandler':u-boot.git/net/nfs.c:656: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:668: undefined reference to `NetState'net/libnet.o: In function `NfsTimeout':u-boot.git/net/nfs.c:574: undefined reference to `NetStartAgain'u-boot.git/net/nfs.c:577: undefined reference to `NetSetTimeout'
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12507 /bin/sh: line 1: 4529 Segmentation fault arm-none-linux-gnueabi-ld
-Bstatic -T u-boot.lds -pie -Ttext 0x80e80000 $UNDEF_SYMarch/arm/cpu/armv7/start.o --start-group lib/libgeneric.olib/lzma/liblzma.o lib/lzo/liblzo.o arch/arm/cpu/armv7/libarmv7.oarch/arm/cpu/armv7/omap4/libomap4.o arch/arm/lib/libarm.ofs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.ofs/jffs2/libjffs2.o fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.ofs/yaffs2/libyaffs2.o fs/ubifs/libubifs.o net/libnet.o disk/libdisk.odrivers/bios_emulator/libatibiosemu.o drivers/block/libblock.odrivers/dma/libdma.o drivers/fpga/libfpga.o drivers/gpio/libgpio.odrivers/hwmon/libhwmon.o drivers/i2c/libi2c.o drivers/input/libinput.odrivers/misc/libmisc.o drivers/mmc/libmmc.o drivers/mtd/libmtd.odrivers/mtd/nand/libnand.o drivers/mtd/onenand/libonenand.odrivers/mtd/ubi/libubi.o drivers/mtd/spi/libspi_flash.odrivers/net/libnet.o drivers/net/phy/libphy.o drivers/pci/libpci.odrivers/pcmcia/libpcmcia.o drivers/power/libpower.odrivers/spi/libspi.o drivers/rtc/librtc.o drivers/serial/libserial.odrivers/twserial/libtws.o drivers/usb/gadget/libusb_gadget.odrivers/usb/host/libusb_host.o drivers/usb/musb/libusb_musb.odrivers/usb/phy/libusb_phy.o drivers/video/libvideo.odrivers/watchdog/libwatchdog.o common/libcommon.o lib/libfdt/libfdt.oapi/libapi.o post/libpost.oarch/arm/cpu/armv7/omap-common/libomap-common.oboard/ti/sdp4430/libsdp4430.o --end-groupu-boot.git/arch/arm/lib/eabi_compat.o -L /opt/codesourcery/arm-none-linux-gnueabi/arm-2009q1/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3
-lgcc -Map u-boot.map -o u-boot
make: *** [u-boot] Error 139
size: ./u-boot: File format not recognized
Configuring for s5p_goni board...board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:279: error: (Each undeclared identifier is reported only once
board.c:279: error: for each function it appears in.)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring for smdkc100 board...board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:279: error: (Each undeclared identifier is reported only once
board.c:279: error: for each function it appears in.)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
--------------------- SUMMARY ---------------------------- Boards compiled: 17
Boards with warnings or errors: 11 ( am3517_evm ca9x4_ct_vxp devkit8000 igep0030 omap3_evm omap3_sdp3430 omap3_zoom1 omap3_zoom2 omap4_sdp4430 s5p_goni smdkc100 )
----------------------------------------------------------
Le 27/11/2010 08:43, Dirk Behme a ?crit :
Quoted 2 lines
Doing a './MAKEALL ARMV7' on the recent master (
d4752d5d2...) doesn't look nice [2].
Globally, this is expected and does not hit only ARMV7 but any ARM board -- I think on the whole MAKEALL arm, only 35 out of 168 boards build without errors or warnings (more do build, but with warnings though).
ELF relocation was introduced during this cycle, on all ARM cpus but only on a handful of boards. Others need to be fixed by their maintainers. Typically, those which miss a CONFIG_SYS_SDRAM_BASE are hit by this issue. Note that not fixing all boards is voluntary: those boards whose maintainer will not have fixed during the coming cycle will be removed--as a janitorial matter, one could say.
For others -- the break may or may not be a consequence of ELF relocation. This will have to be fixed on an individual basis.
Quoted 2 lines
Are there any other pending patches to fix the compilation of the failing boards?
These shall be fixed by their maintainers.
Wolfgang, should I send out a (single) mail to each ARM board maintainer right after this cycle asking them to either fix their board or say that they are not going to? This could help weed out during next cycle.
Quoted 3 lines
Thanks
Dirk
Amicalement,
Signature · 1 line
Albert.
Paulraj
Quoted 6 lines
Wolfgang, should I send out a (single) mail to each ARM board maintainer right after this cycle asking them to either fix their board or say that they are not going to? This could help weed out during next cycle.
IIRC if by the next release cycle, the errors are not fixed, the boards will/should be removed by the individual tree maintainers.
I believe this has already been communicated on the list.
--Sandeep
Dear "Paulraj, Sandeep",
Quoted 5 lines · In message <[email protected]> you…
IIRC if by the next release cycle, the errors are not fixed, the boards will/should be removed by the individual tree maintainers.
I believe this has already been communicated on the list.
True. On the other hand, some board maintainers may think they are not affected, or expect a special invitation. It cannot hurt to explicitly tell them again that they must become active now.
Best regards,
Wolfgang Denk
Signature · 5 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "Whoever undertakes to set himself up as a judge of Truth and Know- ledge is shipwrecked by the laughter of the gods." - Albert Einstein
Dear Albert ARIBAUD,
Quoted 4 lines · In message <[email protected]> you wrote:
Globally, this is expected and does not hit only ARMV7 but any ARM board -- I think on the whole MAKEALL arm, only 35 out of 168 boards build without errors or warnings (more do build, but with warnings though).
Correct. My last build shows 130 out of 168 with errors or warnings.
Quoted 5 lines
These shall be fixed by their maintainers.
Wolfgang, should I send out a (single) mail to each ARM board maintainer right after this cycle asking them to either fix their board or say that they are not going to? This could help weed out during next cycle.
We might as well do this right now. I will try to get -rc2 out this
weekend, and also start a "next" branch. Maybe some board maintainers need a special invitation to fix their boards - eventually some will submit patches even for this release. It's worth a try.
Thanks.
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What was sliced bread the greatest thing since?
Le 27/11/2010 19:50, Wolfgang Denk a ?crit :
Quoted 4 lines
Quoted 3 lines
Wolfgang, should I send out a (single) mail to each ARM board maintainer right after this cycle asking them to either fix their board or say that they are not going to? This could help weed out during next cycle.
Quoted 8 lines
We might as well do this right now. I will try to get -rc2 out this
weekend, and also start a "next" branch. Maybe some board maintainers need a special invitation to fix their boards - eventually some will submit patches even for this release. It's worth a try.Thanks.
Wolfgang Denk
No problem. I am building a list of addresses from the MAINTAINERS list. For those boards which have no maintainer I will use the e-mail address of the last committer to the config header file (skipping Wolfgang's, of course).
I will then send a single mail to myself with everybody in Bcc:, telling them that they are e-mailed as the maintainer or last committer to an u-boot board, informing them of the recent introduction of ELF relocation to u-boot, that it breaks building the board, and that they should take steps to fix the board (these steps may be as simple as adding a couple of lines similar to what was done with edminiv2.h) otherwise the board will be considered orphan and risk being removed.
Amicalement,
Signature · 1 line
Albert.
Dear Albert ARIBAUD,
Quoted 2 lines · In message <[email protected]> you wrote:
No problem. I am building a list of addresses from the
MAINTAINERSlist.
Thanks.
Quoted 3 lines
For those boards which have no maintainer I will use the e-mail address of the last committer to the config header file (skipping Wolfgang's, of course).
Be carefule. There were a lot or global actions done by many people. Rather look at less frequently change files, like board/*/Makefile, and use the _first_ committer.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"The question of whether a computer can think is no more interesting
than the question of whether a submarine can swim"
- Edsgar W. DijkstraLe 27/11/2010 21:50, Wolfgang Denk a ?crit :
Quoted 7 lines
Quoted 3 lines
For those boards which have no maintainer I will use the e-mail address of the last committer to the config header file (skipping Wolfgang's, of course).
Be carefule. There were a lot or global actions done by many people. Rather look at less frequently change files, like board/*/Makefile, and use the _first_ committer.
Thanks for pointing this out. For the moment I'll stick with mailing only official board maintainers. Then I'll carefully go through boards without official maintainers one by one.
Quoted 3 lines
Best regards,
Wolfgang Denk
Amicalement,
Signature · 1 line
Albert.
Le 27/11/2010 22:15, Albert ARIBAUD a ?crit :
Quoted 3 lines
Thanks for pointing this out. For the moment I'll stick with mailing only official board maintainers. Then I'll carefully go through boards without official maintainers one by one.
Message sent out, mistakenly from my alternate address albert at aribaud.net, but anyway... I have had five NDRs, for the following addresses which are all unknown; corresponding boards (within parentheses) should probably be moved to 'unmaintained':
mani.pillai at ti.com (omap3_evm) kletschke at synertronixx.de (scb9328) mag at sysgo.com (impa7 and ep7312) prakash at embedx.com (cerf250) kshitij at ti.com (omap1510inn, omap1610inn)
Amicalement,
Signature · 1 line
Albert.
Le 27/11/2010 23:09, Albert ARIBAUD a ?crit :
Quoted 11 lines
Le 27/11/2010 22:15, Albert ARIBAUD a ?crit :
Quoted 3 lines
Thanks for pointing this out. For the moment I'll stick with mailing only official board maintainers. Then I'll carefully go through boards without official maintainers one by one.
Message sent out, mistakenly from my alternate address albert at aribaud.net, but anyway... I have had five NDRs, for the following addresses which are all unknown; corresponding boards (within parentheses) should probably be moved to 'unmaintained':
Quoted 7 lines
mani.pillai at ti.com (
omap3_evm) kletschke at synertronixx.de (scb9328) mag at sysgo.com (impa7 and ep7312) prakash at embedx.com (cerf250) kshitij at ti.com (omap1510inn, omap1610inn)Amicalement,
Apparently MAINTAINERS entry for Stelian Pop is not correct any more; CC:ing Stelian's address as last seen on the list. If this one is correct, then MAINTAINERS should be fixed.
Amicalement,
Signature · 1 line
Albert.
PATCH 1/1 Fix Stelian's email address
Change my old email address which is no longer valid.
---
Quoted 4 lines · Albert ARIBAUD
Apparently
MAINTAINERSentry for Stelian Pop is not correct any more; CC:ing Stelian's address as last seen on the list. If this one is correct, thenMAINTAINERSshould be fixed.
Indeed, I've changed employers some time ago.
The attached patch replaces all occurences of my old work email with my personal (and persistent) email address.
Please apply.
Thanks,
Stelian.
CREDITS | 2 +- MAINTAINERS | 2 +- arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c | 2 +- arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c | 2 +- arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c | 2 +- arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c | 2 +- .../cpu/arm926ejs/at91/at91sam9m10g45_devices.c | 2 +- arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c | 2 +- arch/arm/cpu/arm926ejs/at91/led.c | 2 +- arch/arm/cpu/arm926ejs/at91/reset.c | 2 +- arch/arm/cpu/arm926ejs/at91/timer.c | 2 +- arch/arm/cpu/arm926ejs/mb86r0x/timer.c | 2 +- arch/arm/include/asm/arch-at91/at91_common.h | 2 +- arch/arm/include/asm/arch-at91/at91cap9.h | 2 +- arch/arm/include/asm/arch-at91/at91cap9_matrix.h | 2 +- arch/arm/include/asm/arch-at91/clk.h | 2 +- arch/arm/include/asm/arch-at91/memory-map.h | 2 +- arch/arm/include/asm/dma-mapping.h | 2 +- board/afeb9260/Makefile | 2 +- board/afeb9260/afeb9260.c | 2 +- board/atmel/at91cap9adk/Makefile | 2 +- board/atmel/at91cap9adk/at91cap9adk.c | 2 +- board/atmel/at91cap9adk/led.c | 2 +- board/atmel/at91sam9260ek/Makefile | 2 +- board/atmel/at91sam9260ek/at91sam9260ek.c | 2 +- board/atmel/at91sam9260ek/led.c | 2 +- board/atmel/at91sam9261ek/Makefile | 2 +- board/atmel/at91sam9261ek/at91sam9261ek.c | 2 +- board/atmel/at91sam9261ek/led.c | 2 +- board/atmel/at91sam9263ek/Makefile | 2 +- board/atmel/at91sam9263ek/at91sam9263ek.c | 2 +- board/atmel/at91sam9263ek/led.c | 2 +- board/atmel/at91sam9m10g45ek/Makefile | 2 +- board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c | 2 +- board/atmel/at91sam9m10g45ek/led.c | 2 +- board/atmel/at91sam9rlek/Makefile | 2 +- board/atmel/at91sam9rlek/at91sam9rlek.c | 2 +- board/atmel/at91sam9rlek/led.c | 2 +- board/calao/sbc35_a9g20/Makefile | 2 +- board/calao/sbc35_a9g20/sbc35_a9g20.c | 2 +- board/calao/tny_a9260/Makefile | 2 +- board/calao/tny_a9260/tny_a9260.c | 2 +- board/esd/meesc/Makefile | 2 +- board/esd/meesc/meesc.c | 2 +- board/esd/otc570/Makefile | 2 +- board/esd/otc570/otc570.c | 2 +- board/eukrea/cpu9260/Makefile | 2 +- board/eukrea/cpu9260/cpu9260.c | 2 +- board/ronetix/pm9261/Makefile | 2 +- board/ronetix/pm9261/led.c | 2 +- board/ronetix/pm9261/pm9261.c | 2 +- board/ronetix/pm9263/Makefile | 2 +- board/ronetix/pm9263/led.c | 2 +- board/ronetix/pm9263/pm9263.c | 2 +- board/ronetix/pm9g45/Makefile | 2 +- board/ronetix/pm9g45/pm9g45.c | 2 +- board/syteco/jadecpu/Makefile | 2 +- drivers/mtd/nand/atmel_nand.c | 2 +- include/configs/at91cap9adk.h | 2 +- include/configs/at91sam9260ek.h | 2 +- include/configs/at91sam9261ek.h | 2 +- include/configs/at91sam9263ek.h | 2 +- include/configs/at91sam9m10g45ek.h | 2 +- include/configs/at91sam9rlek.h | 2 +- include/configs/cpu9260.h | 2 +- include/configs/meesc.h | 2 +- include/configs/otc570.h | 2 +- include/configs/pm9261.h | 2 +- include/configs/pm9263.h | 2 +- include/configs/pm9g45.h | 2 +- include/configs/tny_a9260.h | 2 +- 71 files changed, 71 insertions(+), 71 deletions(-)
CREDITS +1 -1
@@ -387,7 +387,7 @@ D: Support for the Wind River sbc405, sbc8240 board W: http://www.windriver.com N: Stelian Pop -E: stelian.pop at leadtechdesign.com +E: stelian at popies.net D: Atmel AT91CAP9ADK support N: Ricardo Ribalda Delgado
MAINTAINERS +1 -1
@@ -744,7 +744,7 @@ Manikandan Pillai <[email protected]> omap3_evm ARM ARMV7 (OMAP3xx SoC) -Stelian Pop <[email protected]> +Stelian Pop <[email protected]> at91cap9adk ARM926EJS (AT91CAP9 SoC) at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
arch/arm/cpu/arm926ejs/at91/at91cap9_devices.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * (C) Copyright 2009
arch/arm/cpu/arm926ejs/at91/at91sam9260_devices.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/cpu/arm926ejs/at91/at91sam9261_devices.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/cpu/arm926ejs/at91/at91sam9263_devices.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * (C) Copyright 2009
arch/arm/cpu/arm926ejs/at91/at91sam9m10g45_devices.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/cpu/arm926ejs/at91/at91sam9rl_devices.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/cpu/arm926ejs/at91/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/cpu/arm926ejs/at91/reset.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/cpu/arm926ejs/at91/timer.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/cpu/arm926ejs/mb86r0x/timer.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * (C) Copyright 2010
arch/arm/include/asm/arch-at91/at91_common.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/include/asm/arch-at91/at91cap9.h +1 -1
@@ -1,7 +1,7 @@/* * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9.h] * -* Copyright (C) 2007 Stelian Pop <[email protected]> +* Copyright (C) 2007 Stelian Pop <[email protected]> * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> * Copyright (C) 2007 Atmel Corporation. *
arch/arm/include/asm/arch-at91/at91cap9_matrix.h +1 -1
@@ -1,7 +1,7 @@/* * [origin: Linux kernel include/asm-arm/arch-at91/at91cap9_matrix.h] * -* Copyright (C) 2007 Stelian Pop <[email protected]> +* Copyright (C) 2007 Stelian Pop <[email protected]> * Copyright (C) 2007 Lead Tech Design <www.leadtechdesign.com> * Copyright (C) 2006 Atmel Corporation. *
arch/arm/include/asm/arch-at91/clk.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <[email protected]> *
arch/arm/include/asm/arch-at91/memory-map.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
arch/arm/include/asm/dma-mapping.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/afeb9260/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/afeb9260/afeb9260.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * (C) Copyright 2008 Sergey Lapin <[email protected]> *
board/atmel/at91cap9adk/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/atmel/at91cap9adk/at91cap9adk.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91cap9adk/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9260ek/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/atmel/at91sam9260ek/at91sam9260ek.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9260ek/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9261ek/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/atmel/at91sam9261ek/at91sam9261ek.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9261ek/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9263ek/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/atmel/at91sam9263ek/at91sam9263ek.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9263ek/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9m10g45ek/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9m10g45ek/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9rlek/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/atmel/at91sam9rlek/at91sam9rlek.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/atmel/at91sam9rlek/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/calao/sbc35_a9g20/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/calao/sbc35_a9g20/sbc35_a9g20.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Copyright (C) 2009
board/calao/tny_a9260/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/calao/tny_a9260/tny_a9260.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Copyright (C) 2009
board/esd/meesc/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/esd/meesc/meesc.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * (C) Copyright 2009-2010
board/esd/otc570/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/esd/otc570/otc570.c +1 -1
@@ -4,7 +4,7 @@* esd electronic system design gmbh <www.esd.eu> * * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/eukrea/cpu9260/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <stelian.pop at leadtechdesign.com +# Stelian Pop <[email protected] # Lead Tech Design <www.leadtechdesign.com> # Ilko Iliev <www.ronetix.at> #
board/eukrea/cpu9260/cpu9260.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Ilko Iliev <www.ronetix.at> *
board/ronetix/pm9261/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # Ilko Iliev <www.ronetix.at> #
board/ronetix/pm9261/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Ilko Iliev <www.ronetix.at> *
board/ronetix/pm9261/pm9261.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) * Copyright (C) 2009 Jean-Christopher PLAGNIOL-VILLARD <[email protected]>
board/ronetix/pm9263/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # Ilko Iliev <www.ronetix.at> #
board/ronetix/pm9263/led.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Ilko Iliev <www.ronetix.at> *
board/ronetix/pm9263/pm9263.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Copyright (C) 2008 Ronetix Ilko Iliev (www.ronetix.at) * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <[email protected]>
board/ronetix/pm9g45/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
board/ronetix/pm9g45/pm9g45.c +1 -1
@@ -5,7 +5,7 @@* Ronetix GmbH <www.ronetix.at> * * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * See file CREDITS for list of people who contributed to this
board/syteco/jadecpu/Makefile +1 -1
@@ -3,7 +3,7 @@ # Wolfgang Denk, DENX Software Engineering, wd at denx.de. # # (C) Copyright 2008 -# Stelian Pop <[email protected]> +# Stelian Pop <[email protected]> # Lead Tech Design <www.leadtechdesign.com> # # See file CREDITS for list of people who contributed to this
drivers/mtd/nand/atmel_nand.c +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
include/configs/at91cap9adk.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the AT91CAP9ADK board.
include/configs/at91sam9260ek.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the AT91SAM9260EK & AT91SAM9G20EK boards.
include/configs/at91sam9261ek.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the AT91SAM9261EK board.
include/configs/at91sam9263ek.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the AT91SAM9263EK board.
include/configs/at91sam9m10g45ek.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the AT91SAM9M10G45EK board(and AT91SAM9G45EKES).
include/configs/at91sam9rlek.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the AT91SAM9RLEK board.
include/configs/cpu9260.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Ilko Iliev <www.ronetix.at> *
include/configs/meesc.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * (C) Copyright 2009-2010
include/configs/otc570.h +1 -1
@@ -4,7 +4,7 @@* esd electronic system design gmbh <www.esd.eu> * * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the esd OTC570 board.
include/configs/pm9261.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Ilko Iliev <www.ronetix.at> *
include/configs/pm9263.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * Ilko Iliev <www.ronetix.at> *
include/configs/pm9g45.h +1 -1
@@ -5,7 +5,7 @@* Ronetix GmbH <www.ronetix.at> * * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Configuation settings for the PM9G45 board.
include/configs/tny_a9260.h +1 -1
@@ -1,6 +1,6 @@/* * (C) Copyright 2007-2008 -* Stelian Pop <[email protected]> +* Stelian Pop <[email protected]> * Lead Tech Design <www.leadtechdesign.com> * * Copyright (C) 2009
Signature · 1 line
1.7.1
Quoted 12 lines · Albert ARIBAUD
Le 27/11/2010 22:15, Albert ARIBAUD a ?crit :
Quoted 3 lines
Thanks for pointing this out. For the moment I'll stick with mailing only official board maintainers. Then I'll carefully go through boards without official maintainers one by one.
Message sent out, mistakenly from my alternate address albert at aribaud.net, but anyway... I have had five NDRs, for the following addresses which are all unknown; corresponding boards (within parentheses) should probably be moved to 'unmaintained':
mani.pillai at ti.com (
omap3_evm)
...
Quoted 1 line
kshitij at ti.com (omap1510inn, omap1610inn)
Maybe Sandeep could help with this?
Thanks
Dirk
Quoted 25 lines · Wolfgang Denk
Dear Albert ARIBAUD,
Quoted 4 lines · In message <[email protected]> you wrote:
Globally, this is expected and does not hit only ARMV7 but any ARM board -- I think on the whole MAKEALL arm, only 35 out of 168 boards build without errors or warnings (more do build, but with warnings though).
Correct. My last build shows 130 out of 168 with errors or warnings.
Quoted 5 lines
These shall be fixed by their maintainers.
Wolfgang, should I send out a (single) mail to each ARM board maintainer right after this cycle asking them to either fix their board or say that they are not going to? This could help weed out during next cycle.
We might as well do this right now. ? I will try to get -rc2 out this weekend, and also start a "next" branch. ?Maybe some board maintainers need a special invitation to fix their boards - eventually some will submit patches even for this release. It's worth a try.
Thanks.
Wolfgang Denk
Quoted 10 lines
--
DENX Software Engineering GmbH, ? ? MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de What was sliced bread the greatest thing since?
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Hello,
http://patchwork.ozlabs.org/patch/72060/
fixes the GERNERATED_GBL_DATA_SIZE for Devkit8000.
Thomas
Quoted 15 lines · Dirk Behme
Quoted 7 lines · Wolfgang Denk
Quoted 6 lines · In message<[email protected]> ?you wrote:
The following changes since commit
6163f5b4c8873848ed023054bc401727301ea537:? ?malloc: Fix issue with calloc memory possibly being non-zero (2010-11-17 22:06:40 +0100)
are available in the git repository at:
? ?git://git.denx.de/u-boot-arm.git master...
Quoted 2 lines
Applied.
Doing a './MAKEALL ARMV7' on the recent master (
d4752d5d2...) doesn't look nice [2].
Quoted 8 lines
The following configs build fine:
igep0020
mx51evkomap3_beagleomap3_overoomap3_pandoraomap4_panda
I have hardware for igep0020, beagle, overo, panda, and sdp4430. I build daily for these machines and submit patches when they break (there is a patch pending for omap4430 that fixes the build for it).
Steve
Quoted 294 lines
The following boards fail to build:
am3517_evmboardca9x4_ct_vxp
devkit8000
igep0030omap3_evmomap3_sdp3430omap3_zoom1omap3_zoom2omap4_sdp4430s5p_goni
smdkc100I applied [1] to fix a beagle warning.
Are there any other pending patches to fix the compilation of the failing boards?
Thanks
Dirk
[1] http://patchwork.ozlabs.org/patch/72453/
[2] > ./MAKEALL ARMV7
Configuring foram3517_evmboard...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring forca9x4_ct_vxpboard...
syslib.c:26:32: error:asm/arch/sys_proto.h: No such file or directory
make[1]: *** No rule to build the target ?.depend?,
? needed from ?_depend?. ?End.
syslib.c:26:32: error:asm/arch/sys_proto.h: No such file or directory
make[1]: *** [syslib.o] Error 1
make: *** [arch/arm/cpu/armv7/libarmv7.o] Error 2
size: './u-boot': No such file
Configuring for devkit8000 board...start.S: Assembler messages:
start.S:144: Error: constant expression expected -- `ldr
sp,=((0x4020FFFC-CONFIG_SYS_GBL_DATA_SIZE))'
make[1]: *** [start.o] Error 1
make: *** [arch/arm/cpu/armv7/start.o] Error 2
size: './u-boot': No such file
Configuring for igep0020 board...
? ?text ? ?data ? ? bss ? ? dec ? ? hex filename
?219538 ? ?7768 ?214536 ?441842 ? 6bdf2 ./u-boot
Configuring for igep0030 board...net/libnet.o: In function `rpc_req':u-boot.git/net/nfs.c:193: undefined reference to `NetEthHdrSize'u-boot.git/net/nfs.c:202: undefined reference to `NetSendUDPPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetTxPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetServerEther'net/libnet.o: In function `NfsStart':u-boot.git/net/nfs.c:741: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:742: undefined reference to `NetSetHandler'u-boot.git/net/nfs.c:754: undefined reference to `BootFile'u-boot.git/net/nfs.c:754: undefined reference to `NetServerIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurGatewayIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurSubnetMask'u-boot.git/net/nfs.c:754: undefined reference to `NetBootFileSize'u-boot.git/net/nfs.c:754: undefined reference to `NetServerEther'net/libnet.o: In function `nfs_read_reply':u-boot.git/net/nfs.c:563: undefined reference to `NetBootFileXferSize'net/libnet.o: In function `NfsHandler':u-boot.git/net/nfs.c:656: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:668: undefined reference to `NetState'net/libnet.o: In function `NfsTimeout':u-boot.git/net/nfs.c:574: undefined reference to `NetStartAgain'u-boot.git/net/nfs.c:577: undefined reference to `NetSetTimeout'
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12507/bin/sh: line 1: ?8055 Segmentation fault ?arm-none-linux-gnueabi-ld
-Bstatic -Tu-boot.lds-pie -Ttext0x80008000$UNDEF_SYMarch/arm/cpu/armv7/start.o--start-grouplib/libgeneric.olib/lzma/liblzma.olib/lzo/liblzo.oarch/arm/cpu/armv7/libarmv7.oarch/arm/cpu/armv7/omap3/libomap3.oarch/arm/lib/libarm.ofs/cramfs/libcramfs.ofs/fat/libfat.ofs/fdos/libfdos.ofs/jffs2/libjffs2.ofs/reiserfs/libreiserfs.ofs/ext2/libext2fs.ofs/yaffs2/libyaffs2.ofs/ubifs/libubifs.onet/libnet.odisk/libdisk.odrivers/bios_emulator/libatibiosemu.odrivers/block/libblock.odrivers/dma/libdma.odrivers/fpga/libfpga.odrivers/gpio/libgpio.odrivers/hwmon/libhwmon.odrivers/i2c/libi2c.odrivers/input/libinput.odrivers/misc/libmisc.odrivers/mmc/libmmc.odrivers/mtd/libmtd.odrivers/mtd/nand/libnand.odrivers/mtd/onenand/libonenand.odrivers/mtd/ubi/libubi.odrivers/mtd/spi/libspi_flash.odrivers/net/libnet.odrivers/net/phy/libphy.odrivers/pci/libpci.odrivers/pcmcia/libpcmcia.odrivers/power/libpower.odrivers/spi/libspi.odrivers/rtc/librtc.odrivers/serial/libserial.odrivers/twserial/libtws.odrivers/usb/gadget/libusb_gadget.odrivers/usb/host/libusb_host.odrivers/usb/musb/libusb_musb.odrivers/usb/phy/libusb_phy.odrivers/video/libvideo.odrivers/watchdog/libwatchdog.ocommon/libcommon.olib/libfdt/libfdt.oapi/libapi.opost/libpost.oarch/arm/cpu/armv7/omap-common/libomap-common.oboard/isee/igep0030/libigep0030.o--end-groupu-boot.git/arch/arm/lib/eabi_compat.o-L/opt/codesourcery/arm-none-linux-gnueabi/arm-2009q1/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3
-lgcc -Map u-boot.map -o u-boot
make: *** [u-boot] Error 139
size: ./u-boot: File format not recognized
Configuring for mx51evk board...
? ?text ? ?data ? ? bss ? ? dec ? ? hex filename
?159945 ? ?6504 ?216928 ?383377 ? 5d991 ./u-boot
Configuring foromap3_beagleboard...
? ?text ? ?data ? ? bss ? ? dec ? ? hex filename
?249978 ? 11288 ?203700 ?464966 ? 71846 ./u-boot
Configuring foromap3_overoboard...
? ?text ? ?data ? ? bss ? ? dec ? ? hex filename
?216254 ? 10836 ?210628 ?437718 ? 6add6 ./u-boot
Configuring foromap3_evmboard...start.S: Assembler messages:
start.S:144: Error: constant expression expected -- `ldr
sp,=((0x4020FFFC-CONFIG_SYS_GBL_DATA_SIZE))'
make[1]: *** [start.o] Error 1
make: *** [arch/arm/cpu/armv7/start.o] Error 2
size: './u-boot': No such file
Configuring foromap3_pandoraboard...
? ?text ? ?data ? ? bss ? ? dec ? ? hex filename
?326528 ? 10480 ?205116 ?542124 ? 845ac ./u-boot
Configuring foromap3_sdp3430board...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring foromap3_zoom1board...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring foromap3_zoom2board...board.c: In function '__dram_init_banksize':
board.c:233: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
board.c:233: error: (Each undeclared identifier is reported only once
board.c:233: error: for each function it appears in.)board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:312: error: 'CONFIG_SYS_SDRAM_BASE' undeclared (first use in
this function)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring foromap4_pandaboard...
? ?text ? ?data ? ? bss ? ? dec ? ? hex filename
?147402 ? ?5892 ?201256 ?354550 ? 568f6 ./u-boot
Configuring foromap4_sdp4430board...net/libnet.o: In function `rpc_req':u-boot.git/net/nfs.c:193: undefined reference to `NetEthHdrSize'u-boot.git/net/nfs.c:202: undefined reference to `NetSendUDPPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetTxPacket'u-boot.git/net/nfs.c:203: undefined reference to `NetServerEther'net/libnet.o: In function `NfsStart':u-boot.git/net/nfs.c:741: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:742: undefined reference to `NetSetHandler'u-boot.git/net/nfs.c:754: undefined reference to `BootFile'u-boot.git/net/nfs.c:754: undefined reference to `NetServerIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurGatewayIP'u-boot.git/net/nfs.c:754: undefined reference to `NetOurSubnetMask'u-boot.git/net/nfs.c:754: undefined reference to `NetBootFileSize'u-boot.git/net/nfs.c:754: undefined reference to `NetServerEther'net/libnet.o: In function `nfs_read_reply':u-boot.git/net/nfs.c:563: undefined reference to `NetBootFileXferSize'net/libnet.o: In function `NfsHandler':u-boot.git/net/nfs.c:656: undefined reference to `NetSetTimeout'u-boot.git/net/nfs.c:668: undefined reference to `NetState'net/libnet.o: In function `NfsTimeout':u-boot.git/net/nfs.c:574: undefined reference to `NetStartAgain'u-boot.git/net/nfs.c:577: undefined reference to `NetSetTimeout'
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12273
arm-none-linux-gnueabi-ld: BFD (Sourcery G++ Lite 2009q1-203)
2.19.51.20090205 assertion fail /scratch/mitchell/builds/4.3-arm-none-linux-gnueabi-respin/lite/obj/binutils-src-2009q1-203-arm-none-linux-gnueabi-i686-pc-linux-gnu/bfd/elf32-arm.c:12507/bin/sh: line 1: ?4529 Segmentation fault ?arm-none-linux-gnueabi-ld
-Bstatic -Tu-boot.lds-pie -Ttext0x80e80000$UNDEF_SYMarch/arm/cpu/armv7/start.o--start-grouplib/libgeneric.olib/lzma/liblzma.olib/lzo/liblzo.oarch/arm/cpu/armv7/libarmv7.oarch/arm/cpu/armv7/omap4/libomap4.oarch/arm/lib/libarm.ofs/cramfs/libcramfs.ofs/fat/libfat.ofs/fdos/libfdos.ofs/jffs2/libjffs2.ofs/reiserfs/libreiserfs.ofs/ext2/libext2fs.ofs/yaffs2/libyaffs2.ofs/ubifs/libubifs.onet/libnet.odisk/libdisk.odrivers/bios_emulator/libatibiosemu.odrivers/block/libblock.odrivers/dma/libdma.odrivers/fpga/libfpga.odrivers/gpio/libgpio.odrivers/hwmon/libhwmon.odrivers/i2c/libi2c.odrivers/input/libinput.odrivers/misc/libmisc.odrivers/mmc/libmmc.odrivers/mtd/libmtd.odrivers/mtd/nand/libnand.odrivers/mtd/onenand/libonenand.odrivers/mtd/ubi/libubi.odrivers/mtd/spi/libspi_flash.odrivers/net/libnet.odrivers/net/phy/libphy.odrivers/pci/libpci.odrivers/pcmcia/libpcmcia.odrivers/power/libpower.odrivers/spi/libspi.odrivers/rtc/librtc.odrivers/serial/libserial.odrivers/twserial/libtws.odrivers/usb/gadget/libusb_gadget.odrivers/usb/host/libusb_host.odrivers/usb/musb/libusb_musb.odrivers/usb/phy/libusb_phy.odrivers/video/libvideo.odrivers/watchdog/libwatchdog.ocommon/libcommon.olib/libfdt/libfdt.oapi/libapi.opost/libpost.oarch/arm/cpu/armv7/omap-common/libomap-common.oboard/ti/sdp4430/libsdp4430.o--end-groupu-boot.git/arch/arm/lib/eabi_compat.o-L/opt/codesourcery/arm-none-linux-gnueabi/arm-2009q1/bin/../lib/gcc/arm-none-linux-gnueabi/4.3.3
-lgcc -Map u-boot.map -o u-boot
make: *** [u-boot] Error 139
size: ./u-boot: File format not recognized
Configuring fors5p_goniboard...board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:279: error: (Each undeclared identifier is reported only once
board.c:279: error: for each function it appears in.)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file
Configuring for smdkc100 board...board.c: In function 'board_init_f':
board.c:279: error: 'CONFIG_SYS_INIT_SP_ADDR' undeclared (first use in
this function)
board.c:279: error: (Each undeclared identifier is reported only once
board.c:279: error: for each function it appears in.)
make[1]: *** [board.o] Error 1
make: *** [arch/arm/lib/libarm.o] Error 2
size: './u-boot': No such file--------------------- SUMMARY ---------------------------- Boards compiled: 17
Boards with warnings or errors: 11 (am3517_evmca9x4_ct_vxpdevkit8000 igep0030omap3_evmomap3_sdp3430omap3_zoom1omap3_zoom2omap4_sdp4430s5p_gonismdkc100 )
----------------------------------------------------------
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
Paulraj
Quoted 6 lines
I have hardware for igep0020, beagle, overo, panda, and sdp4430. I build daily for these machines and submit patches when they break (there is a patch pending for omap4430 that fixes the build for it).
Which patch? Can you give me the link?
Quoted 6 lines · Sandeep
Quoted 4 lines
I have hardware for igep0020, beagle, overo, panda, and sdp4430. I build daily for these machines and submit patches when they break (there is a patch pending for omap4430 that fixes the build for it).
Which patch? Can you give me the link?
Fear not, you didn't miss anything! The patch just made it to mainline from the arm branch:
http://git.denx.de/?p=u-boot.git;a=commit;h=8721e95b16024f0a92ccc1cd85aecf6672fe9499
Steve
Quoted 19 lines · Dirk Behme
Quoted 9 lines · Wolfgang Denk
Quoted 8 lines · In message<[email protected]> you wrote:
The following changes since commit
6163f5b4c8873848ed023054bc401727301ea537:malloc: Fix issue with calloc memory possibly being non-zero (2010-11-17 22:06:40 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.gitmaster...
Quoted 2 lines
Applied.
Doing a './MAKEALL ARMV7' on the recent master (
d4752d5d2...) doesn't look nice [2].The following configs build fine:
Quoted 8 lines
igep0020
mx51evkomap3_beagleomap3_overoomap3_pandoraomap4_pandaThe following boards fail to build:
Just fyi, scanning the list archive, for most of the boards there are patches available fixing the build:
Quoted 1 line
am3517_evm
http://lists.denx.de/pipermail/u-boot/2010-November/082641.html
http://lists.denx.de/pipermail/u-boot/2010-November/082642.html
Quoted 1 line
ca9x4_ct_vxp
http://lists.denx.de/pipermail/u-boot/2010-November/081033.html
http://lists.denx.de/pipermail/u-boot/2010-November/081034.html
http://lists.denx.de/pipermail/u-boot/2010-November/082654.html
Quoted 1 line
devkit8000
Already fixed in mainline now
Quoted 1 line
igep0030
http://lists.denx.de/pipermail/u-boot/2010-November/082603.html
Quoted 1 line
omap3_evm
http://lists.denx.de/pipermail/u-boot/2010-November/082606.html
But I still get an error
Configuring for omap3_evm board...
arm-none-linux-gnueabi-ld: section .bss [8003f5c0 -> 8007e31f] overlaps section .rel.dyn [8003f5c0 -> 80044e4f]
arm-none-linux-gnueabi-ld: section .dynsym [80044e50 -> 80044eef] overlaps section .bss [8003f5c0 -> 8007e31f]
arm-none-linux-gnueabi-ld: u-boot: section .bss vma 0x8003f5c0 overlaps previous sections
make: *** [u-boot] Error 1
size: './u-boot': No such file
I have to check if there is already a fix available.
Quoted 1 line
omap3_sdp3430
http://lists.denx.de/pipermail/u-boot/2010-November/082649.html
Quoted 1 line
omap3_zoom1
http://lists.denx.de/pipermail/u-boot/2010-November/082650.html
Quoted 1 line
omap3_zoom2
http://lists.denx.de/pipermail/u-boot/2010-November/082651.html
Quoted 1 line
omap4_sdp4430
http://lists.denx.de/pipermail/u-boot/2010-November/082556.html
Quoted 1 line
s5p_goni
http://lists.denx.de/pipermail/u-boot/2010-November/082225.html
Quoted 1 line
smdkc100
http://lists.denx.de/pipermail/u-boot/2010-November/082224.html
So it seems to me that the last ARMV7 board with build issues is omap3_evm. But as mentioned, I have to check the archives for this.
Best regards
Dirk
Paulraj
Quoted 46 lines · Dirk Behme
Quoted 19 lines · Wolfgang Denk
Quoted 9 lines
Quoted 8 lines · In message<[email protected]> you wrote:
The following changes since commit
6163f5b4c8873848ed023054bc401727301ea537:malloc: Fix issue with calloc memory possibly being non-zero (2010-11-17 22:06:40 +0100)
are available in the git repository at:
git://git.denx.de/u-boot-arm.gitmaster...
Quoted 2 lines
Applied.
Doing a './MAKEALL ARMV7' on the recent master (
d4752d5d2...) doesn't look nice [2].The following configs build fine:
Quoted 8 lines
igep0020
mx51evkomap3_beagleomap3_overoomap3_pandoraomap4_pandaThe following boards fail to build:
Just fyi, scanning the list archive, for most of the boards there are patches available fixing the build:
Quoted 1 line
am3517_evmhttp://lists.denx.de/pipermail/u-boot/2010-November/082641.html
http://lists.denx.de/pipermail/u-boot/2010-November/082642.htmlQuoted 1 line
ca9x4_ct_vxphttp://lists.denx.de/pipermail/u-boot/2010-November/081033.html
http://lists.denx.de/pipermail/u-boot/2010-November/081034.html
http://lists.denx.de/pipermail/u-boot/2010-November/082654.html
Quoted 9 lines
Quoted 1 line
devkit8000
Already fixed in mainline now
Quoted 1 line
igep0030
http://lists.denx.de/pipermail/u-boot/2010-November/082603.html
Quoted 1 line
omap3_evm
I will add to u-boot-ti and send a pull request tonight.
Quoted 40 lines
http://lists.denx.de/pipermail/u-boot/2010-November/082606.html
But I still get an error
Configuring for
omap3_evmboard...
arm-none-linux-gnueabi-ld: section .bss [8003f5c0->8007e31f] overlaps section .rel.dyn [8003f5c0->80044e4f]arm-none-linux-gnueabi-ld: section .dynsym [
80044e50->80044eef] overlaps section .bss [8003f5c0->8007e31f]arm-none-linux-gnueabi-ld: u-boot: section .bss vma
0x8003f5c0overlaps previous sections
make: *** [u-boot] Error 1size: './u-boot': No such file
I have to check if there is already a fix available.
Quoted 1 line
omap3_sdp3430http://lists.denx.de/pipermail/u-boot/2010-November/082649.html
Quoted 1 line
omap3_zoom1http://lists.denx.de/pipermail/u-boot/2010-November/082650.html
Quoted 1 line
omap3_zoom2http://lists.denx.de/pipermail/u-boot/2010-November/082651.html
Quoted 1 line
omap4_sdp4430http://lists.denx.de/pipermail/u-boot/2010-November/082556.html
Quoted 1 line
s5p_goni
Quoted 8 lines
http://lists.denx.de/pipermail/u-boot/2010-November/082225.html
Quoted 1 line
smdkc100
http://lists.denx.de/pipermail/u-boot/2010-November/082224.html
So it seems to me that the last ARMV7 board with build issues is
omap3_evm. But as mentioned, I have to check the archives for this.
That is correct and I believe it is being worked upon.
--Sandeep