Skip to contentSkip to conversation

arm: Add argument to init_machine

RFC PATCH New David Brown 2 participants 5 messages Dec 8, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

RFC PATCH 1/1 arm: Add argument to init_machine

Some ARM SOCs are used in numerous configurations. While much of the configuration is identical between these configuration, since it is contained within the SOC, there will often be slight differences in external hardware that is connected.

To reduce the number of machine_is_...() tests in the machine init code, pass an agrument from the machine descriptor through to the init function.

This adds 4-bytes to the kernel for every machine that is compiled in. Machines that make use of the pointer will have additional data, which will likely be offset by a reduction in runtime tests needed.

This version only modifies the Qualcomm board files. The real patch will modify all used board files.
---
I wanted to see what people thought of doing this in general for ARM. We can get the same effect for some of our new targets by having short individual functions that call another function with a different pointer.

 arch/arm/include/asm/mach/arch.h   |    3 ++-
 arch/arm/kernel/setup.c            |    6 ++++--
 arch/arm/mach-msm/board-halibut.c  |    2 +-
 arch/arm/mach-msm/board-mahimahi.c |    2 +-
 arch/arm/mach-msm/board-msm7x27.c  |    2 +-
 arch/arm/mach-msm/board-msm7x30.c  |    2 +-
 arch/arm/mach-msm/board-qsd8x50.c  |    2 +-
 arch/arm/mach-msm/board-sapphire.c |    2 +-
 arch/arm/mach-msm/board-trout.c    |    2 +-
 9 files changed, 13 insertions(+), 10 deletions(-)
arch/arm/include/asm/mach/arch.h +2 -1
index d97a964..744db02 100644
@@ -39,7 +39,8 @@ struct machine_desc {
 	void			(*map_io)(void);/* IO mapping function	*/
 	void			(*init_irq)(void);
 	struct sys_timer	*timer;		/* system tick timer	*/
-	void			(*init_machine)(void);
+	void			(*init_machine)(void *);
+	void			*init_machine_arg;
 };
 
 /*
arch/arm/kernel/setup.c +4 -2
index 336f14e..01ec2f8 100644
@@ -708,13 +708,14 @@ static struct init_tags {
 	{ 0, ATAG_NONE }
 };
 
-static void (*init_machine)(void) __initdata;
+static void (*init_machine)(void *) __initdata;
+static void *init_machine_arg __initdata;
 
 static int __init customize_machine(void)
 {
 	/* customizes platform devices, or adds new ones */
 	if (init_machine)
-		init_machine();
+		init_machine(init_machine_arg);
 	return 0;
 }
 arch_initcall(customize_machine);
@@ -875,6 +876,7 @@ void __init setup_arch(char **cmdline_p)
 	init_arch_irq = mdesc->init_irq;
 	system_timer = mdesc->timer;
 	init_machine = mdesc->init_machine;
+	init_machine_arg = mdesc->init_machine_arg;
 
 #ifdef CONFIG_VT
 #if defined(CONFIG_VGA_CONSOLE)
arch/arm/mach-msm/board-halibut.c +1 -1
index 75dabb1..9e1f3e5 100644
@@ -73,7 +73,7 @@ static void __init halibut_init_irq(void)
 	msm_init_irq();
 }
 
-static void __init halibut_init(void)
+static void __init halibut_init(void *arg)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
arch/arm/mach-msm/board-mahimahi.c +1 -1
index ef3ebf2..bde075f 100644
@@ -48,7 +48,7 @@ static struct platform_device *devices[] __initdata = {
 	&msm_device_nand,
 };
 
-static void __init mahimahi_init(void)
+static void __init mahimahi_init(void *arg)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
arch/arm/mach-msm/board-msm7x27.c +1 -1
index e7a76ef..9502422 100644
@@ -80,7 +80,7 @@ static void __init msm7x2x_init_irq(void)
 	msm_init_irq();
 }
 
-static void __init msm7x2x_init(void)
+static void __init msm7x2x_init(void *arg)
 {
 	if (socinfo_init() < 0)
 		BUG();
arch/arm/mach-msm/board-msm7x30.c +1 -1
index 05241df..8505b0f 100644
@@ -51,7 +51,7 @@ static void __init msm7x30_init_irq(void)
 	msm_init_irq();
 }
 
-static void __init msm7x30_init(void)
+static void __init msm7x30_init(void *arg)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
arch/arm/mach-msm/board-qsd8x50.c +1 -1
index ed2af4a..c8cb364 100644
@@ -91,7 +91,7 @@ static void __init qsd8x50_init_irq(void)
 	msm_init_sirc();
 }
 
-static void __init qsd8x50_init(void)
+static void __init qsd8x50_init(void *arg)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
arch/arm/mach-msm/board-sapphire.c +1 -1
index 8919ffb..9f79411 100644
@@ -63,7 +63,7 @@ static void __init sapphire_init_irq(void)
 	msm_init_irq();
 }
 
-static void __init sapphire_init(void)
+static void __init sapphire_init(void *arg)
 {
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
arch/arm/mach-msm/board-trout.c +1 -1
index 73f1460..84455ed 100644
@@ -55,7 +55,7 @@ static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
 	mi->bank[0].size = (101*1024*1024);
 }
 
-static void __init trout_init(void)
+static void __init trout_init(void *arg)
 {
 	int rc;
 
Signature · 4 lines
1.7.3.2

Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
#1 lore raw

RFC PATCH 1/1 arm: Add argument to init_machine

Quoted 5 lines · David Brown

Some ARM SOCs are used in numerous configurations. While much of the configuration is identical between these configuration, since it is contained within the SOC, there will often be slight differences in external hardware that is connected.

Quoted 7 lines

To reduce the number of machine_is_...() tests in the machine init code, pass an agrument from the machine descriptor through to the init function.

This adds 4-bytes to the kernel for every machine that is compiled in. Machines that make use of the pointer will have additional data, which will likely be offset by a reduction in runtime tests needed.

I guess most of the increases are within the .init sections, which get lost because of their alignment(s).

Quoted 5 lines

---
I wanted to see what people thought of doing this in general for ARM. We can get the same effect for some of our new targets by having short individual functions that call another function with a different pointer.

As far as the patch itself goes, it looks fine, but I'm not seeing anything using this new facility in this patch.

I don't like adding things without seeing how they're going to be used, as sometimes these things never get used. Maybe you can give some examples?

#2 lore raw

RFC PATCH 1/1 arm: Add argument to init_machine

Quoted 6 lines · Russell King - ARM Linux

As far as the patch itself goes, it looks fine, but I'm not seeing anything using this new facility in this patch.

I don't like adding things without seeing how they're going to be used, as sometimes these things never get used. Maybe you can give some examples?

We've got some new board files that can make use of it. I'll work on getting those to a point where I can send them out. I mostly just wanted to make sure that the idea didn't cause excessive revulsion.

Thanks,
David

Signature · 2 lines
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
#3 lore raw

RFC PATCH 1/1 arm: Add argument to init_machine

Quoted 5 lines · David Brown
Quoted 3 lines · Russell King - ARM Linux

As far as the patch itself goes, it looks fine, but I'm not seeing anything using this new facility in this patch.

Quoted 7 lines
Quoted 3 lines

I don't like adding things without seeing how they're going to be used, as sometimes these things never get used. Maybe you can give some examples?

We've got some new board files that can make use of it. I'll work on getting those to a point where I can send them out. I mostly just wanted to make sure that the idea didn't cause excessive revulsion.

Well, that depends on how you're going to use this.

Generally, we find that it's best to arrange the common stuff as libraries, and have the platform specific code call the library functions to perform the common work.

Calling a common function from the platform methods and putting lots of if (machine_is_xxx()) in it certainly isn't the right method.

#4 lore raw

RFC PATCH 1/1 arm: Add argument to init_machine

Quoted 8 lines · Russell King - ARM Linux

Well, that depends on how you're going to use this.

Generally, we find that it's best to arrange the common stuff as libraries, and have the platform specific code call the library functions to perform the common work.

Calling a common function from the platform methods and putting lots of if (machine_is_xxx()) in it certainly isn't the right method.

The idea is to reduce the machine_is_xxx() calls. I'll have a clearer patch soon, but it basically lets us need only one machine init function for a group of boards, so instead of something like:

	void board1_init(void)
	{
		init_thing(parameter1);
		init_stuff(parameter2);
	}

	void board2_init(void)
	{
		init_thing(parameter1b);
		init_stuff(parameter2b);
	}

(or having machine_is_xxx() calls): we end up with

	void board_family_init(void *arg)
	{
		struct board_family_data *priv = arg;

		init_thing(priv->parameter1);
		init_stuff(priv->parameter2);
	}

I do share a bit of the concern that the mechanism can be abused, but I've also found that nearly everything in the board files gets abused.

David

Signature · 2 lines
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.