rfc v2: ARM: mach-shmobile: mackerel: Add zboot support
PATCH 1/1 rfc v2: ARM: mach-shmobile: mackerel: Add zboot support
When CONFIG_ZBOOT_ROM is selected, the resulting zImage file will be small boot loader and may be burned to rom or flash.
Compile tested only.
This patch assumes that head-mackerel.txt will be the same as head-ap4evb.txt. I am waiting for verification of this.
This patch depends on
* ARM: 6515/1: Add zboot support for SuperH Mobile ARM (merged into the devel branch of Russel King's linux-2.6-arm tree)
* ARM: 6514/1: mach-shmobile: Add zboot support for SuperH Mobile ARM (merged into the devel branch of Russel King's linux-2.6-arm tree)
* MACH_MACKEREL (3211) being present in arch/arm/tools/mach-types
v2:
* Use head-mackerel.txt for Mackerel.
head-ap4evb.txt was used by mistake.
--- .../mach-shmobile/include/mach/head-mackerel.txt | 87 ++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/zboot.h | 3 + 2 files changed, 90 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-shmobile/include/mach/head-mackerel.txt
arch/arm/mach-shmobile/include/mach/head-mackerel.txt new file +87 -0
@@ -0,0 +1,87 @@ +LIST "partner-jet-setup.txt" +LIST "(C) Copyright 2010 Renesas Solutions Corp" +LIST "Kuninori Morimoto <[email protected]>" + +LIST "RWT Setting" +EW 0xE6020004, 0xA500 +EW 0xE6030004, 0xA500 + +DD 0x01001000, 0x01001000 + +LIST "GPIO Setting" +EB 0xE6051013, 0xA2 + +LIST "CPG" +ED 0xE6150080, 0x00000180 +ED 0xE61500C0, 0x00000002 + +WAIT 1, 0xFE40009C + +LIST "FRQCR" +ED 0xE6150000, 0x2D1305C3 +ED 0xE61500E0, 0x9E40358E +ED 0xE6150004, 0x80331050 + +WAIT 1, 0xFE40009C + +ED 0xE61500E4, 0x00002000 + +WAIT 1, 0xFE40009C + +LIST "PLL" +ED 0xE6150028, 0x00004000 + +WAIT 1, 0xFE40009C + +ED 0xE615002C, 0x93000040 + +WAIT 1, 0xFE40009C + +LIST "BSC" +ED 0xFEC10000, 0x00E0001B + +LIST "SBSC1" +ED 0xFE400354, 0x01AD8000 +ED 0xFE400354, 0x01AD8001 + +WAIT 5, 0xFE40009C + +ED 0xFE400008, 0xBCC90151 +ED 0xFE400040, 0x41774113 +ED 0xFE400044, 0x2712E229 +ED 0xFE400048, 0x20C18505 +ED 0xFE40004C, 0x00110209 +ED 0xFE400010, 0x00000087 + +WAIT 10, 0xFE40009C + +ED 0xFE400084, 0x0000003F +EB 0xFE500000, 0x00 + +WAIT 5, 0xFE40009C + +ED 0xFE400084, 0x0000FF0A +EB 0xFE500000, 0x00 + +WAIT 1, 0xFE40009C + +ED 0xFE400084, 0x00002201 +EB 0xFE500000, 0x00 +ED 0xFE400084, 0x00000302 +EB 0xFE500000, 0x00 +EB 0xFE5C0000, 0x00 +ED 0xFE400008, 0xBCC90159 +ED 0xFE40008C, 0x88800004 +ED 0xFE400094, 0x00000004 +ED 0xFE400028, 0xA55A0032 +ED 0xFE40002C, 0xA55A000C +ED 0xFE400020, 0xA55A2048 +ED 0xFE400008, 0xBCC90959 + +LIST "Change CPGA setting" +ED 0xE61500E0, 0x9E40352E +ED 0xE6150004, 0x80331050 + +WAIT 1, 0xFE40009C + +ED 0xE6150354, 0x00000002
arch/arm/mach-shmobile/include/mach/zboot.h +3 -0
@@ -13,6 +13,9 @@#ifdef CONFIG_MACH_AP4EVB #define MACH_TYPE MACH_TYPE_AP4EVB#include "mach/head-ap4evb.txt" +#elif CONFIG_MACH_MACKEREL +#define MACH_TYPE MACH_TYPE_MACKEREL +#include "mach/head-ap4evb.txt" #else #error "unsupported board."#endif
Signature · 1 line
1.7.2.3
PATCH 1/1 rfc v2: ARM: mach-shmobile: mackerel: Add zboot support
Quoted 3 lines · Simon Horman
* Use head-mackerel.txt for Mackerel.
head-ap4evb.txt was used by mistake.
...
Quoted 5 lines
arch/arm/mach-shmobile/include/mach/zboot.h +0
-0
arch/arm/mach-shmobile/include/mach/zboot.h line 21
Quoted 9 lines
arch/arm/mach-shmobile/include/mach/zboot.h +3
-0@@ -13,6 +13,9 @@#ifdef CONFIG_MACH_AP4EVB #define MACH_TYPE MACH_TYPE_AP4EVB#include "mach/head-ap4evb.txt" +#elif CONFIG_MACH_MACKEREL +#define MACH_TYPE MACH_TYPE_MACKEREL +#include "mach/head-ap4evb.txt" #else #error "unsupported board."#endif
Looks like it still does?
PATCH 1/1 rfc v2: ARM: mach-shmobile: mackerel: Add zboot support
Quoted 6 lines · Paul Mundt
Quoted 3 lines · Simon Horman
* Use head-mackerel.txt for Mackerel.
head-ap4evb.txt was used by mistake....
Quoted 16 lines
Quoted 5 lines
arch/arm/mach-shmobile/include/mach/zboot.h +0
-0arch/arm/mach-shmobile/include/mach/zboot.h line 21
Quoted 9 lines
arch/arm/mach-shmobile/include/mach/zboot.h +3
-0@@ -13,6 +13,9 @@#ifdef CONFIG_MACH_AP4EVB #define MACH_TYPE MACH_TYPE_AP4EVB#include "mach/head-ap4evb.txt" +#elif CONFIG_MACH_MACKEREL +#define MACH_TYPE MACH_TYPE_MACKEREL +#include "mach/head-ap4evb.txt" #else #error "unsupported board."#endif Looks like it still does?
oops