Skip to contentSkip to conversation

next rebased / ARM help needed / release delayed

U-Boot Wolfgang Denk 2 participants 5 messages Dec 9, 2010

lore
Share & tools
lore
#0 lore raw

Hello,

here is some news. Not exactly good news it seems:

1) I had to rebase the "next" branch to remove a commit which incorrectly changed behaviour of some commands.

2) By some stupid accident I lost track of some / most / all ARM related patches that are supposed to go into the current release and/or next; unfortunately I also maked these as "applied' in patchwork.

If you have any outstanding ARM patches that should go in, please drop me a note (ideally including the respective link into patchwork).

Thanks, and sorry again.

3) We will have a delay in the release. I will try to get a -rc3 out by the weekend; new target for 2010.12 is December 20 (but don't hold your breath).

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"If that makes any sense to you, you have a big problem."
                                  -- C. Durance, Computer Science 234
#1 lore raw

Dear Wolfgang Denk,

Am 09.12.2010 10:52, schrieb Wolfgang Denk:

Quoted 8 lines

2) By some stupid accident I lost track of some / most / all ARM related patches that are supposed to go into the current release and/or next; unfortunately I also maked these as "applied' in patchwork.

If you have any outstanding ARM patches that should go in, please drop me a note (ideally including the respective link into patchwork).

Apart from the ones already in u-boot-arm/master I have four other patches for v2010.12:
- http://patchwork.ozlabs.org/patch/73686/ [U-Boot,4/4] armv7: fix
relocation skip
- http://patchwork.ozlabs.org/patch/73685/ [U-Boot,3/4] arm:
fixloop(): do not use r8 for relocation
- http://patchwork.ozlabs.org/patch/73683/ [U-Boot,2/4] arm:
relocate_code(): do not set register useless
- http://patchwork.ozlabs.org/patch/73684/ [U-Boot,1/4] arm:
copy_loop(): use scratch register

All of them are 'accepted' by 'wd' and I can not find them in u-boot-arm/master

But I have never seen a concrete 'Acked-by' nor 'Tested-by' for those patches. Albert can you please do so?
I think they are correct and really needed but my understanding of that multi eyes principles is to have more than one to sign a patch.

Quoted 1 line

Thanks, and sorry again.

No problem for me.

Quoted 3 lines

3) We will have a delay in the release. I will try to get a -rc3 out by the weekend; new target for 2010.12 is December 20 (but don't hold your breath).

So we may get a christmas release ;)

regards

Andreas Bie?mann

#2 lore raw

Dear Wolfgang Denk,

Am 09.12.2010 13:08, schrieb Andreas Bie?mann:

Quoted 12 lines

Dear Wolfgang Denk,

Am 09.12.2010 10:52, schrieb Wolfgang Denk:

Quoted 8 lines

2) By some stupid accident I lost track of some / most / all ARM related patches that are supposed to go into the current release and/or next; unfortunately I also maked these as "applied' in patchwork.

If you have any outstanding ARM patches that should go in, please drop me a note (ideally including the respective link into patchwork).

can you please mark http://patchwork.ozlabs.org/patch/73563/ as superseeded?

This is the patch which should not go into mainline but has 'accepted' state.

regards

Andreas Bie?mann

#3 lore raw

Dear "=?ISO-8859-1?Q?Andreas_Bie=DFmann?=",

Quoted 5 lines · In message <[email protected]> you wrote:

can you please mark http://patchwork.ozlabs.org/patch/73563/ as superseeded?

This is the patch which should not go into mainline but has 'accepted' state.

Done.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
While money can't buy happiness, it certainly lets  you  choose  your
own form of misery.
#4 lore raw
In reply to Andreas Bießmann

Dear "=?ISO-8859-1?Q?Andreas_Bie=DFmann?=",

Quoted 24 lines · In message <[email protected]> you wrote:

Dear Wolfgang Denk,

Am 09.12.2010 10:52, schrieb Wolfgang Denk:

Quoted 8 lines

2) By some stupid accident I lost track of some / most / all ARM related patches that are supposed to go into the current release and/or next; unfortunately I also maked these as "applied' in patchwork.

If you have any outstanding ARM patches that should go in, please drop me a note (ideally including the respective link into patchwork).

Apart from the ones already in u-boot-arm/master I have four other patches for v2010.12:
- http://patchwork.ozlabs.org/patch/73686/ [U-Boot,4/4] armv7: fix
relocation skip
- http://patchwork.ozlabs.org/patch/73685/ [U-Boot,3/4] arm:
fixloop(): do not use r8 for relocation
- http://patchwork.ozlabs.org/patch/73683/ [U-Boot,2/4] arm:
relocate_code(): do not set register useless
- http://patchwork.ozlabs.org/patch/73684/ [U-Boot,1/4] arm:
copy_loop(): use scratch register

Quoted 2 lines

All of them are 'accepted' by 'wd' and I can not find them in u-boot-arm/master

Found them, and pushed them out to "master" now.

Quoted 5 lines
Quoted 3 lines

3) We will have a delay in the release. I will try to get a -rc3 out by the weekend; new target for 2010.12 is December 20 (but don't hold your breath).

So we may get a christmas release ;)

No. If I don't get this out by Dec 22, it will not be released before Dec 28 either.

Best regards,

Wolfgang Denk

Signature · 4 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I didn't know it was impossible when I did it."