Skip to contentSkip to conversation

arm: omap: add support for RM-680

PATCH New Aaro Koskinen 4 participants 14 messages Dec 9, 2010 – Dec 11, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover arm: omap: add support for RM-680

These patches add initial support for Nokia RM-680 board.

Patches 1-7 are just preparation and make board-rx51-sdram.c reusable by renaming it to sdram-nokia.c etc.

Patch 8 adds a new board and requires updated mach-types from
http://www.arm.linux.org.uk/developer/machines/download.php in order to compile.

These are based on top of linux-omap/master
(92f446c47b18827e61483787668b0bb5f7a033b6).

...

Aaro Koskinen (8):
arm: omap: rename board-rx51-sdram.c to sdram-nokia.c
arm: omap: add sdram-nokia.h
arm: omap: sdram-nokia: prepare for new memory timings
arm: omap: sdram-nokia: use array to list timings
arm: omap: sdram-nokia: improve error handling
arm: omap: sdram-nokia: delete redundant timing data
arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data
arm: omap: add minimal support for RM-680

 arch/arm/mach-omap2/Kconfig                        |    6 +
 arch/arm/mach-omap2/Makefile                       |    5 +-
 arch/arm/mach-omap2/board-rm680.c                  |  187 ++++++++++++++++++++
 arch/arm/mach-omap2/board-rx51.c                   |    4 +-
 .../{board-rx51-sdram.c => sdram-nokia.c}          |  102 +++++++++---
 arch/arm/mach-omap2/sdram-nokia.h                  |   12 ++
 arch/arm/plat-omap/include/plat/uncompress.h       |    1 +
 7 files changed, 292 insertions(+), 25 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-rm680.c
 rename arch/arm/mach-omap2/{board-rx51-sdram.c => sdram-nokia.c} (66%)
 create mode 100644 arch/arm/mach-omap2/sdram-nokia.h
#1 lore raw

PATCH 1/8 arm: omap: rename board-rx51-sdram.c to sdram-nokia.c

Rename the file and functions so that it can be reused by future Nokia boards. Based on patches by Juha Keski-Saari.

---
 arch/arm/mach-omap2/Makefile                       |    2 +-
 arch/arm/mach-omap2/board-rx51.c                   |    4 +-
 .../{board-rx51-sdram.c => sdram-nokia.c}          |   34 ++++++++++----------
 3 files changed, 20 insertions(+), 20 deletions(-)
 rename arch/arm/mach-omap2/{board-rx51-sdram.c => sdram-nokia.c} (85%)
arch/arm/mach-omap2/Makefile +1 -1
index fbc8739..3a71d19 100644
@@ -141,7 +141,7 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
-					   board-rx51-sdram.o \
+					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
 					   board-rx51-video.o \
 					   hsmmc.o
arch/arm/mach-omap2/board-rx51.c +2 -2
index 6635142..b7df8e3 100644
@@ -35,7 +35,7 @@
 
 #define RX51_GPIO_SLEEP_IND 162
 
-struct omap_sdrc_params *rx51_get_sdram_timings(void);
+struct omap_sdrc_params *nokia_get_sdram_timings(void);
 extern void rx51_video_mem_init(void);
 
 static struct gpio_led gpio_leds[] = {
@@ -105,7 +105,7 @@ static void __init rx51_init_irq(void)
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
 	omap3_pm_init_cpuidle(rx51_cpuidle_params);
-	sdrc_params = rx51_get_sdram_timings();
+	sdrc_params = nokia_get_sdram_timings();
 	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
 }
arch/arm/mach-omap2/sdram-nokia.c renamed from arch/arm/mach-omap2/board-rx51-sdram.c +17 -17
similarity index 85%
rename from arch/arm/mach-omap2/board-rx51-sdram.c
rename to arch/arm/mach-omap2/sdram-nokia.c
index a43b2c5..690202b 100644
@@ -1,7 +1,7 @@
 /*
- * SDRC register values for RX51
+ * SDRC register values for Nokia boards
  *
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008, 2010 Nokia Corporation
  *
  * Lauri Leukkunen <[email protected]>
  *
@@ -43,9 +43,9 @@ struct sdram_timings {
 	u32 tWTR;
 };
 
-static struct omap_sdrc_params rx51_sdrc_params[4];
+static struct omap_sdrc_params nokia_sdrc_params[4];
 
-static const struct sdram_timings rx51_timings[] = {
+static const struct sdram_timings memory_timings[] = {
 	{
 		.casl = 3,
 		.tDAL = 33000,
@@ -110,12 +110,12 @@ static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
 #ifdef DEBUG
 #define SDRC_SET_ONE(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval((reg), (st), (end), \
-			rx51_timings->field, (rate), #field) < 0) \
+			memory_timings->field, (rate), #field) < 0) \
 		err = -1;
 #else
 #define SDRC_SET_ONE(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval((reg), (st), (end), \
-			rx51_timings->field) < 0) \
+			memory_timings->field) < 0) \
 		err = -1;
 #endif
 
@@ -148,14 +148,14 @@ static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
 #ifdef DEBUG
 #define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			rx51_timings->field, \
+			memory_timings->field, \
 			(rate), #field) < 0) \
 		err = -1;
 
 #else
 #define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
 	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
-			rx51_timings->field, (rate)) < 0) \
+			memory_timings->field, (rate)) < 0) \
 		err = -1;
 #endif
 
@@ -184,7 +184,7 @@ static int sdrc_timings(int id, long rate)
 	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
 
 	ticks_per_ms = l3_rate;
-	rfr = rx51_timings[0].tREF * ticks_per_ms / 1000000;
+	rfr = memory_timings[0].tREF * ticks_per_ms / 1000000;
 	if (rfr > 65535 + 50)
 		rfr = 65535;
 	else
@@ -197,18 +197,18 @@ static int sdrc_timings(int id, long rate)
 	l = rfr << 8;
 	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
 
-	rx51_sdrc_params[id].rate = rate;
-	rx51_sdrc_params[id].actim_ctrla = actim_ctrla;
-	rx51_sdrc_params[id].actim_ctrlb = actim_ctrlb;
-	rx51_sdrc_params[id].rfr_ctrl = rfr_ctrl;
-	rx51_sdrc_params[id].mr = 0x32;
+	nokia_sdrc_params[id].rate = rate;
+	nokia_sdrc_params[id].actim_ctrla = actim_ctrla;
+	nokia_sdrc_params[id].actim_ctrlb = actim_ctrlb;
+	nokia_sdrc_params[id].rfr_ctrl = rfr_ctrl;
+	nokia_sdrc_params[id].mr = 0x32;
 
-	rx51_sdrc_params[id + 1].rate = 0;
+	nokia_sdrc_params[id + 1].rate = 0;
 
 	return err;
 }
 
-struct omap_sdrc_params *rx51_get_sdram_timings(void)
+struct omap_sdrc_params *nokia_get_sdram_timings(void)
 {
 	int err;
 
@@ -216,6 +216,6 @@ struct omap_sdrc_params *rx51_get_sdram_timings(void)
 	err |= sdrc_timings(1, 83000000);
 	err |= sdrc_timings(2, 166000000);
 
-	return &rx51_sdrc_params[0];
+	return &nokia_sdrc_params[0];
 }
 
Signature · 1 line
1.5.6.5
#2 lore raw

PATCH 2/8 arm: omap: add sdram-nokia.h

In reply to Aaro Koskinen

Add a header file for Nokia SDRAM functions. Based on patches by Juha Keski-Saari.

---
 arch/arm/mach-omap2/board-rx51.c  |    2 +-
 arch/arm/mach-omap2/sdram-nokia.c |    1 +
 arch/arm/mach-omap2/sdram-nokia.h |   12 ++++++++++++
 3 files changed, 14 insertions(+), 1 deletions(-)
 create mode 100644 arch/arm/mach-omap2/sdram-nokia.h
arch/arm/mach-omap2/board-rx51.c +1 -1
index b7df8e3..7362c91 100644
@@ -32,10 +32,10 @@
 
 #include "mux.h"
 #include "pm.h"
+#include "sdram-nokia.h"
 
 #define RX51_GPIO_SLEEP_IND 162
 
-struct omap_sdrc_params *nokia_get_sdram_timings(void);
 extern void rx51_video_mem_init(void);
 
 static struct gpio_led gpio_leds[] = {
arch/arm/mach-omap2/sdram-nokia.c +1 -0
index 690202b..261efc8 100644
@@ -22,6 +22,7 @@
 #include <plat/clock.h>
 #include <plat/sdrc.h>
 
+#include "sdram-nokia.h"
 
 /* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
 struct sdram_timings {
arch/arm/mach-omap2/sdram-nokia.h new file +12 -0
new file mode 100644
index 0000000..ee63da5
@@ -0,0 +1,12 @@
+/*
+ * SDRC register values for Nokia boards
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct omap_sdrc_params *nokia_get_sdram_timings(void);
+
Signature · 1 line
1.5.6.5
#3 lore raw

PATCH 2/8 arm: omap: add sdram-nokia.h

Aaro Koskinen had written, on 12/09/2010 10:39 AM, the following:
[...]

Quoted 8 lines
arch/arm/mach-omap2/sdram-nokia.h new file +2 -0
new file mode 100644
index 0000000..ee63da5
@@ -0,0 +1,12 @@
+/*
+ * SDRC register values for Nokia boards

arch/arm/mach-omap2/sdram-nokia.h line 12

Quoted 10 lines
arch/arm/mach-omap2/sdram-nokia.h new file +10 -0
+ *
+ * Copyright (C) 2010 Nokia
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+struct omap_sdrc_params *nokia_get_sdram_timings(void);
+

Minor comment: Header guard missing. maybe nice to add #ifndef, #def, #endif.

Regards,
Nishanth Menon

#4 lore raw

PATCH 3/8 arm: omap: sdram-nokia: prepare for new memory timings

In reply to Aaro Koskinen

Rename the current timings to indicate they're for 166 MHz. Based on patches by Eduardo Valentin and Juha Keski-Saari.

Cc Eduardo Valentin <[email protected]>
---
 arch/arm/mach-omap2/sdram-nokia.c |   11 ++++++-----
 1 files changed, 6 insertions(+), 5 deletions(-)
arch/arm/mach-omap2/sdram-nokia.c +6 -5
index 261efc8..97d1673 100644
@@ -46,7 +46,7 @@ struct sdram_timings {
 
 static struct omap_sdrc_params nokia_sdrc_params[4];
 
-static const struct sdram_timings memory_timings[] = {
+static const struct sdram_timings nokia_166mhz_timings[] = {
 	{
 		.casl = 3,
 		.tDAL = 33000,
@@ -160,7 +160,8 @@ static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
 		err = -1;
 #endif
 
-static int sdrc_timings(int id, long rate)
+static int sdrc_timings(int id, long rate,
+			const struct sdram_timings *memory_timings)
 {
 	u32 ticks_per_ms;
 	u32 rfr, l;
@@ -213,9 +214,9 @@ struct omap_sdrc_params *nokia_get_sdram_timings(void)
 {
 	int err;
 
-	err = sdrc_timings(0, 41500000);
-	err |= sdrc_timings(1, 83000000);
-	err |= sdrc_timings(2, 166000000);
+	err = sdrc_timings(0, 41500000, nokia_166mhz_timings);
+	err |= sdrc_timings(1, 83000000, nokia_166mhz_timings);
+	err |= sdrc_timings(2, 166000000, nokia_166mhz_timings);
 
 	return &nokia_sdrc_params[0];
 }
Signature · 1 line
1.5.6.5
#5 lore raw

PATCH 4/8 arm: omap: sdram-nokia: use array to list timings

In reply to Aaro Koskinen

Use an array to make it easier to add new values.

---
 arch/arm/mach-omap2/sdram-nokia.c |   21 +++++++++++++++------
 1 files changed, 15 insertions(+), 6 deletions(-)
arch/arm/mach-omap2/sdram-nokia.c +15 -6
index 97d1673..1171451 100644
@@ -44,8 +44,6 @@ struct sdram_timings {
 	u32 tWTR;
 };
 
-static struct omap_sdrc_params nokia_sdrc_params[4];
-
 static const struct sdram_timings nokia_166mhz_timings[] = {
 	{
 		.casl = 3,
@@ -67,6 +65,16 @@ static const struct sdram_timings nokia_166mhz_timings[] = {
 	},
 };
 
+static const struct {
+	long rate;
+	struct sdram_timings const *data;
+} nokia_timings[] = {
+	{ 41500000, nokia_166mhz_timings },
+	{ 83000000, nokia_166mhz_timings },
+	{ 166000000, nokia_166mhz_timings },
+};
+static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
+
 static unsigned long sdrc_get_fclk_period(long rate)
 {
 	/* In picoseconds */
@@ -212,11 +220,12 @@ static int sdrc_timings(int id, long rate,
 
 struct omap_sdrc_params *nokia_get_sdram_timings(void)
 {
-	int err;
+	int err = 0;
+	int i;
 
-	err = sdrc_timings(0, 41500000, nokia_166mhz_timings);
-	err |= sdrc_timings(1, 83000000, nokia_166mhz_timings);
-	err |= sdrc_timings(2, 166000000, nokia_166mhz_timings);
+	for (i = 0; i < ARRAY_SIZE(nokia_timings); i++)
+		err |= sdrc_timings(i, nokia_timings[i].rate,
+				       nokia_timings[i].data);
 
 	return &nokia_sdrc_params[0];
 }
Signature · 1 line
1.5.6.5
#6 lore raw

PATCH 5/8 arm: omap: sdram-nokia: improve error handling

In reply to Aaro Koskinen

Actually check for errors: print an error log and return NULL.

---
 arch/arm/mach-omap2/sdram-nokia.c |    8 ++++++--
 1 files changed, 6 insertions(+), 2 deletions(-)
arch/arm/mach-omap2/sdram-nokia.c +6 -2
index 1171451..863586b 100644
@@ -223,10 +223,14 @@ struct omap_sdrc_params *nokia_get_sdram_timings(void)
 	int err = 0;
 	int i;
 
-	for (i = 0; i < ARRAY_SIZE(nokia_timings); i++)
+	for (i = 0; i < ARRAY_SIZE(nokia_timings); i++) {
 		err |= sdrc_timings(i, nokia_timings[i].rate,
 				       nokia_timings[i].data);
+		if (err)
+			pr_err("%s: error with rate %ld: %d\n", __func__,
+			       nokia_timings[i].rate, err);
+	}
 
-	return &nokia_sdrc_params[0];
+	return err ? NULL : nokia_sdrc_params;
 }
 
Signature · 1 line
1.5.6.5
#7 lore raw

PATCH 6/8 arm: omap: sdram-nokia: delete redundant timing data

In reply to Aaro Koskinen

41.5 MHz SDRAM clock is not usable.

---
 arch/arm/mach-omap2/sdram-nokia.c |    1 -
 1 files changed, 0 insertions(+), 1 deletions(-)
arch/arm/mach-omap2/sdram-nokia.c +0 -1
index 863586b..baf83ec 100644
@@ -69,7 +69,6 @@ static const struct {
 	long rate;
 	struct sdram_timings const *data;
 } nokia_timings[] = {
-	{ 41500000, nokia_166mhz_timings },
 	{ 83000000, nokia_166mhz_timings },
 	{ 166000000, nokia_166mhz_timings },
 };
Signature · 1 line
1.5.6.5
#8 lore raw

PATCH 7/8 arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data

In reply to Aaro Koskinen

Introduce 97.6/195.2 MHz memory timing data. Based on patches by Eduardo Valentin, Igor Dmitriev and Juha Keski-Saari.

Cc Eduardo Valentin <[email protected]>
Cc Igor Dmitriev <[email protected]>
---
 arch/arm/mach-omap2/sdram-nokia.c |   44 +++++++++++++++++++++++++++++++++++++
 1 files changed, 44 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/sdram-nokia.c +44 -0
index baf83ec..14caa22 100644
@@ -44,6 +44,27 @@ struct sdram_timings {
 	u32 tWTR;
 };
 
+static const struct sdram_timings nokia_97dot6mhz_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 30725,
+		.tDPL = 15362,
+		.tRRD = 10241,
+		.tRCD = 20483,
+		.tRP = 15362,
+		.tRAS = 40967,
+		.tRC = 56330,
+		.tRFC = 138266,
+		.tXSR = 204839,
+
+		.tREF = 7798,
+
+		.tXP = 2,
+		.tCKE = 4,
+		.tWTR = 2,
+	},
+};
+
 static const struct sdram_timings nokia_166mhz_timings[] = {
 	{
 		.casl = 3,
@@ -65,12 +86,35 @@ static const struct sdram_timings nokia_166mhz_timings[] = {
 	},
 };
 
+static const struct sdram_timings nokia_195dot2mhz_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 30725,
+		.tDPL = 15362,
+		.tRRD = 10241,
+		.tRCD = 20483,
+		.tRP = 15362,
+		.tRAS = 40967,
+		.tRC = 56330,
+		.tRFC = 138266,
+		.tXSR = 204839,
+
+		.tREF = 7752,
+
+		.tXP = 2,
+		.tCKE = 4,
+		.tWTR = 2,
+	},
+};
+
 static const struct {
 	long rate;
 	struct sdram_timings const *data;
 } nokia_timings[] = {
 	{ 83000000, nokia_166mhz_timings },
+	{ 97600000, nokia_97dot6mhz_timings },
 	{ 166000000, nokia_166mhz_timings },
+	{ 195200000, nokia_195dot2mhz_timings },
 };
 static struct omap_sdrc_params nokia_sdrc_params[ARRAY_SIZE(nokia_timings) + 1];
 
Signature · 1 line
1.5.6.5
#9 lore raw

PATCH 8/8 arm: omap: add minimal support for RM-680

In reply to Aaro Koskinen

Add minimal support for Nokia RM-680 board.

Tested with omap2plus_defconfig.

---
 arch/arm/mach-omap2/Kconfig                  |    6 +
 arch/arm/mach-omap2/Makefile                 |    3 +
 arch/arm/mach-omap2/board-rm680.c            |  187 ++++++++++++++++++++++++++
 arch/arm/plat-omap/include/plat/uncompress.h |    1 +
 4 files changed, 197 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/mach-omap2/board-rm680.c
arch/arm/mach-omap2/Kconfig +6 -0
index b67b1a9..9c317d6 100644
@@ -221,6 +221,12 @@ config MACH_NOKIA_N8X0
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 
+config MACH_NOKIA_RM680
+	bool "Nokia RM-680 board"
+	depends on ARCH_OMAP3
+	default y
+	select OMAP_PACKAGE_CBB
+
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3
arch/arm/mach-omap2/Makefile +3 -0
index 3a71d19..25bc945 100644
@@ -140,6 +140,9 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   hsmmc.o \
 					   board-flash.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
+obj-$(CONFIG_MACH_NOKIA_RM680)		+= board-rm680.o \
+					   sdram-nokia.o \
+					   hsmmc.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 					   sdram-nokia.o \
 					   board-rx51-peripherals.o \
arch/arm/mach-omap2/board-rm680.c new file +187 -0

187 lines not on this page · raw message

arch/arm/plat-omap/include/plat/uncompress.h +1 -0
index 229fbf2..7bbc074 100644
@@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_OMAP3(3, craneboard);
 		DEBUG_LL_OMAP3(3, igep0020);
 		DEBUG_LL_OMAP3(3, igep0030);
+		DEBUG_LL_OMAP3(3, nokia_rm680);
 		DEBUG_LL_OMAP3(3, nokia_rx51);
 		DEBUG_LL_OMAP3(3, omap3517evm);
 		DEBUG_LL_OMAP3(3, omap3_beagle);
Signature · 1 line
1.5.6.5
#10 lore raw

PATCH 8/8 arm: omap: add minimal support for RM-680

Hi Aaro,

A couple of small comments below, otherwise looks nice to me.

Jamie

Quoted 6 lines · Aaro Koskinen

Add minimal support for Nokia RM-680 board.

Tested with omap2plus_defconfig.

---

[...]

Quoted 18 lines
arch/arm/mach-omap2/board-rm680.c new file +18 -0
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+static struct omap_onenand_platform_data board_onenand_data[] = {
+	{
+		.gpio_irq	= 65,
+		.flags		= ONENAND_SYNC_READWRITE,
+	}
+};
+#endif
+
+/* eMMC */
+static struct omap2_hsmmc_info mmc[] __initdata = {
+	{
+		.name		= "internal",
+		.mmc		= 2,
+		.caps		= MMC_CAP_4_BIT_DATA | MMC_CAP_MMC_HIGHSPEED,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,

arch/arm/mach-omap2/board-rm680.c line 140

Quoted 10 lines
arch/arm/mach-omap2/board-rm680.c new file +10 -0
+	},
+	{ /* Terminator */ }
+};
+
+static void __init rm680_peripherals_init(void)
+{
+	platform_add_devices(rm680_peripherals_devices,
+				ARRAY_SIZE(rm680_peripherals_devices));
+	rm680_i2c_init();
+	gpmc_onenand_init(board_onenand_data);

What happens if CONFIG_MTD_ONENAND_OMAP2=n and CONFIG_MTD_ONENAND_OMAP2_MODULE=n? Do you need to define board_onenand_data to NULL if these aren't enabled?

Quoted 18 lines
arch/arm/mach-omap2/board-rm680.c new file +18 -0
+	omap2_hsmmc_init(mmc);
+}
+
+static void __init rm680_init_irq(void)
+{
+	struct omap_sdrc_params *sdrc_params;
+
+	sdrc_params = nokia_get_sdram_timings();
+	omap2_init_common_hw(sdrc_params, sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif

arch/arm/mach-omap2/board-rm680.c line 168

Quoted 10 lines
arch/arm/mach-omap2/board-rm680.c new file +10 -0
+
+static struct omap_musb_board_data rm680_musb_data = {
+	.interface_type	= MUSB_INTERFACE_ULPI,
+	.mode		= MUSB_PERIPHERAL,
+	.power		= 100,
+};
+
+static void __init rm680_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);

The same here as with the onenand data.

#11 lore raw

PATCH 8/8 arm: omap: add minimal support for RM-680

Hi,

Quoted 9 lines · Jamie Iles

arch/arm/mach-omap2/board-rm680.c line 140

Quoted 6 lines
arch/arm/mach-omap2/board-rm680.c new file +6 -0
+static void __init rm680_peripherals_init(void)
+{
+	platform_add_devices(rm680_peripherals_devices,
+				ARRAY_SIZE(rm680_peripherals_devices));
+	rm680_i2c_init();
+	gpmc_onenand_init(board_onenand_data);

What happens if CONFIG_MTD_ONENAND_OMAP2=n and CONFIG_MTD_ONENAND_OMAP2_MODULE=n? Do you need to define board_onenand_data to NULL if these aren't enabled?

[...]

Quoted 4 lines

arch/arm/mach-omap2/board-rm680.c line 168

Quoted 3 lines
arch/arm/mach-omap2/board-rm680.c new file +3 -0
+static void __init rm680_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);

The same here as with the onenand data.

Check the following commits in linux-omap tree:

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=5403187f83c12c6f4c03547e0cc05bac0310be7b

and

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=7203f8a48bb63015ebe58a6f2a38aec1cb208b9d

A.

#12 lore raw

PATCH 8/8 arm: omap: add minimal support for RM-680

Quoted 18 lines · Aaro Koskinen

Hi,

Quoted 9 lines · Jamie Iles

arch/arm/mach-omap2/board-rm680.c line 140

Quoted 6 lines
arch/arm/mach-omap2/board-rm680.c new file +6 -0
+static void __init rm680_peripherals_init(void)
+{
+	platform_add_devices(rm680_peripherals_devices,
+				ARRAY_SIZE(rm680_peripherals_devices));
+	rm680_i2c_init();
+	gpmc_onenand_init(board_onenand_data);

What happens if CONFIG_MTD_ONENAND_OMAP2=n and CONFIG_MTD_ONENAND_OMAP2_MODULE=n? Do you need to define board_onenand_data to NULL if these aren't enabled?

[...]

Quoted 4 lines

arch/arm/mach-omap2/board-rm680.c line 168

Quoted 3 lines
arch/arm/mach-omap2/board-rm680.c new file +3 -0
+static void __init rm680_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);

The same here as with the onenand data.

Quoted 7 lines

Check the following commits in linux-omap tree:

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=5403187f83c12c6f4c03547e0cc05bac0310be7b

and

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=7203f8a48bb63015ebe58a6f2a38aec1cb208b9d

Thanks for the pointer! It looks a bit confusing to my eyes but I guess it's better than lots of ifdeffery.

Jamie

maintainer
#13 lore raw

PATCH 8/8 arm: omap: add minimal support for RM-680

Quoted 11 lines · Jamie Iles
Quoted 8 lines · Aaro Koskinen

Check the following commits in linux-omap tree:

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=5403187f83c12c6f4c03547e0cc05bac0310be7b

and

http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=7203f8a48bb63015ebe58a6f2a38aec1cb208b9d

Thanks for the pointer! It looks a bit confusing to my eyes but I guess it's better than lots of ifdeffery.

Queuing these for the next merge window.

Tony