Skip to contentSkip to conversation

drivers: ld9040 amoled driver support

PATCH New Donghwa Lee 2 participants 2 messages Dec 20, 2010 – Dec 24, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 drivers: ld9040 amoled driver support

This patch is ld9040 amoled panel driver using RGB interface. I resend it because there was no comment.

ld9040 panel is 4 ~ 4.5 inch real WVGA model. It is similar to s6e63m0 panel driver and use spi gpio to send panel information.

---
 drivers/video/backlight/Kconfig        |    8 +
 drivers/video/backlight/Makefile       |    1 +
 drivers/video/backlight/ld9040.c       |  927 ++++++++++++++++++++++++++++++++
 drivers/video/backlight/ld9040_gamma.h |  203 +++++++
 4 files changed, 1139 insertions(+), 0 deletions(-)
 create mode 100644 drivers/video/backlight/ld9040.c
 create mode 100644 drivers/video/backlight/ld9040_gamma.h
drivers/video/backlight/Kconfig +8 -0
index e54a337..db3d123 100644
@@ -109,6 +109,14 @@ config LCD_S6E63M0
 	  If you have an S6E63M0 LCD Panel, say Y to enable its
 	  LCD control driver.
 
+config LCD_LD9040
+	tristate "LD9040 AMOLED LCD Driver"
+	depends on SPI && BACKLIGHT_CLASS_DEVICE
+	default n
+	help
+	  If you have an LD9040 LCD Panel, say Y to enable its
+	  LCD control driver.
+
 endif # LCD_CLASS_DEVICE
 
 #
drivers/video/backlight/Makefile +1 -0
index 44c0f81..457996c 100644
@@ -12,6 +12,7 @@ obj-$(CONFIG_LCD_VGG2432A4)	   += vgg2432a4.o
 obj-$(CONFIG_LCD_TDO24M)	   += tdo24m.o
 obj-$(CONFIG_LCD_TOSA)		   += tosa_lcd.o
 obj-$(CONFIG_LCD_S6E63M0)	+= s6e63m0.o
+obj-$(CONFIG_LCD_LD9040)	+= ld9040.o
 
 obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
 obj-$(CONFIG_BACKLIGHT_ATMEL_PWM)    += atmel-pwm-bl.o
drivers/video/backlight/ld9040.c new file +927 -0

927 lines not on this page · raw message

drivers/video/backlight/ld9040_gamma.h new file +203 -0

203 lines not on this page · raw message

Signature · 1 line
1.6.0.4
#1 lore raw

PATCH 1/1 drivers: ld9040 amoled driver support

Quoted 10 lines · Donghwa Lee

This patch is ld9040 amoled panel driver using RGB interface. I resend it because there was no comment.

ld9040 panel is 4 ~ 4.5 inch real WVGA model. It is similar to s6e63m0 panel driver and use spi gpio to send panel information.

The backlight subsystem alleges to have a maintainer, so I'd rather avoid taking backlight-related patches through the fbdev tree. I can of course take them with Richard's Acked-by, though.