APM_CONFIG on x86 - Is it possible?
Hello,
To an ancient target (my UMAX 530T ActionBook - plz don't laugh...) I am trying to build a lean kernel based on 2.6.32.24 (~ Ubuntu 10.04). Battery monitoring used to be based on /proc/apm.
I believe ACPI is not supported on this old notebook.
Now, it seems that CONFIG_APM_POWER cannot be set, since:
1. The configuration place for APM_POWER is in:
./drivers/power/Kconfig:25:
config APM_POWER
tristate "APM emulation for class batteries" depends on APM_EMULATION
2. The configuration place for APM_EMULATION is in:
./kernel/power/Kconfig:201:
config APM_EMULATION
tristate "Advanced Power Management Emulation"
depends on PM && SYS_SUPPORTS_APM_EMULATION3. But the configuration places for the latter - SYS_SUPPORTS_APM_EMULATION
- exists only in:
./arch/powerpc/Kconfig:185:config SYS_SUPPORTS_APM_EMULATION ./arch/sh/Kconfig:120:config SYS_SUPPORTS_APM_EMULATION ./arch/mips/Kconfig:896:config SYS_SUPPORTS_APM_EMULATION ./arch/arm/Kconfig:32:config SYS_SUPPORTS_APM_EMULATION
and none under arch/x86 ! :():
So my bottom line questions are:
+ Am I missing something?
+ What is the 'right way' to configure a 2.6.3m.nn kernel that should support battery monitoring on such ancient laptops.
When replying, please CC: yotam DOT medini AT Gmail DOT c0m regards -- yotam
Quoted 29 lines · On Fri, 31 Dec 2010 19:38:58 +0200 Yotam Medini wrote:
Hello,
To an ancient target (my UMAX 530T ActionBook - plz don't laugh...) I am trying to build a lean kernel based on 2.6.32.24 (~ Ubuntu 10.04). Battery monitoring used to be based on
/proc/apm.
I believe ACPI is not supported on this old notebook.
Now, it seems thatCONFIG_APM_POWERcannot be set, since:1. The configuration place for
APM_POWERis in:
./drivers/power/Kconfig:25:
configAPM_POWER
tristate "APM emulation for class batteries" depends onAPM_EMULATION2. The configuration place for
APM_EMULATIONis in:./kernel/power/Kconfig:201: config APM_EMULATION tristate "Advanced Power Management Emulation" depends on PM && SYS_SUPPORTS_APM_EMULATION3. But the configuration places for the latter -
SYS_SUPPORTS_APM_EMULATION
- exists only in:
./arch/powerpc/Kconfig:185:configSYS_SUPPORTS_APM_EMULATION./arch/sh/Kconfig:120:configSYS_SUPPORTS_APM_EMULATION./arch/mips/Kconfig:896:configSYS_SUPPORTS_APM_EMULATION./arch/arm/Kconfig:32:configSYS_SUPPORTS_APM_EMULATION
and none underarch/x86! :():
Quoted 8 lines
So my bottom line questions are:
+ Am I missing something?
+ What is the 'right way' to configure a 2.6.3m.nn kernel that should support battery monitoring on such ancient laptops.When replying, please CC: yotam DOT medini AT Gmail DOT c0m regards -- yotam
--
arch/x86/Kconfig has the kconfig symbol "APM":
menuconfig APM
tristate "APM (Advanced Power Management) BIOS support" depends on X86_32 && PM_SLEEP
=> /proc/apm for battery status information
so as long as your target system is 32-bit X86, you should be OK.
PM_SLEEP depends on SUSPEND || HIBERNATION. PM needs to be enabled, and SWAP has to be enabled for HIBERNATION.
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
desserts: http://www.xenotime.net/linux/recipes/
Randy,
Thanks for your quick reply.
Sorry, but the subject line should have been:
APM_POWER on x86 - Is it possible?
I do get
CONFIG_APM=m
in the .config, but I am trying to get
CONFIG_APM_POWER=m
as well. So far, I do not see how.
regards -- yotam
Quoted 57 lines · On Fri, 31 Dec 2010 10:33:45 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 29 lines · On Fri, 31 Dec 2010 19:38:58 +0200 Yotam Medini wrote:
Hello,
To an ancient target (my UMAX 530T ActionBook - plz don't laugh...) I am trying to build a lean kernel based on 2.6.32.24 (~ Ubuntu 10.04). Battery monitoring used to be based on
/proc/apm.
I believe ACPI is not supported on this old notebook.
Now, it seems thatCONFIG_APM_POWERcannot be set, since:1. The configuration place for
APM_POWERis in:
./drivers/power/Kconfig:25:
configAPM_POWER
tristate "APM emulation for class batteries" depends onAPM_EMULATION2. The configuration place for
APM_EMULATIONis in:./kernel/power/Kconfig:201: config APM_EMULATION tristate "Advanced Power Management Emulation" depends on PM && SYS_SUPPORTS_APM_EMULATION3. But the configuration places for the latter -
SYS_SUPPORTS_APM_EMULATION
- exists only in:
./arch/powerpc/Kconfig:185:configSYS_SUPPORTS_APM_EMULATION./arch/sh/Kconfig:120:configSYS_SUPPORTS_APM_EMULATION./arch/mips/Kconfig:896:configSYS_SUPPORTS_APM_EMULATION./arch/arm/Kconfig:32:configSYS_SUPPORTS_APM_EMULATION
and none underarch/x86! :():Quoted 8 lines
So my bottom line questions are:
+ Am I missing something?
+ What is the 'right way' to configure a 2.6.3m.nn kernel that should support battery monitoring on such ancient laptops.When replying, please CC: yotam DOT medini AT Gmail DOT c0m regards -- yotam
--
arch/x86/Kconfighas the kconfig symbol "APM":menuconfig APM
tristate "APM (Advanced Power Management) BIOS support" depends on X86_32 && PM_SLEEP=>
/proc/apmfor battery status informationso as long as your target system is 32-bit X86, you should be OK.
PM_SLEEPdepends on SUSPEND || HIBERNATION. PM needs to be enabled, and SWAP has to be enabled for HIBERNATION.---
~Randy
*** Remember to useDocumentation/SubmitChecklistwhen testing your code ***
desserts: http://www.xenotime.net/linux/recipes/
Quoted 5 lines · On Fri, 31 Dec 2010 21:28:00 +0200 Yotam Medini wrote:
Randy,
Thanks for your quick reply.
Sorry, but the subject line should have been:
APM_POWERon x86 - Is it possible?
Nope, not on X86.
Quoted 5 lines
I do get
CONFIG_APM=m
in the .config, but I am trying to get
CONFIG_APM_POWER=m
as well. So far, I do not see how.
APM_POWER depends on APM_EMULATION, which is not available on X86. But real APM is available on X86, so why would you need APM_EMULATION instead of APM_FOR_REAL ?
Enabling APM (according to its Kconfig help text) provides /proc/apm battery status information.
Quoted 62 lines
regards -- yotam
Quoted 50 lines · On Fri, 31 Dec 2010 10:33:45 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 29 lines · On Fri, 31 Dec 2010 19:38:58 +0200 Yotam Medini wrote:
Hello,
To an ancient target (my UMAX 530T ActionBook - plz don't laugh...) I am trying to build a lean kernel based on 2.6.32.24 (~ Ubuntu 10.04). Battery monitoring used to be based on
/proc/apm.
I believe ACPI is not supported on this old notebook.
Now, it seems thatCONFIG_APM_POWERcannot be set, since:1. The configuration place for
APM_POWERis in:
./drivers/power/Kconfig:25:
configAPM_POWER
tristate "APM emulation for class batteries" depends onAPM_EMULATION2. The configuration place for
APM_EMULATIONis in:./kernel/power/Kconfig:201: config APM_EMULATION tristate "Advanced Power Management Emulation" depends on PM && SYS_SUPPORTS_APM_EMULATION3. But the configuration places for the latter -
SYS_SUPPORTS_APM_EMULATION
- exists only in:
./arch/powerpc/Kconfig:185:configSYS_SUPPORTS_APM_EMULATION./arch/sh/Kconfig:120:configSYS_SUPPORTS_APM_EMULATION./arch/mips/Kconfig:896:configSYS_SUPPORTS_APM_EMULATION./arch/arm/Kconfig:32:configSYS_SUPPORTS_APM_EMULATION
and none underarch/x86! :():Quoted 8 lines
So my bottom line questions are:
+ Am I missing something?
+ What is the 'right way' to configure a 2.6.3m.nn kernel that should support battery monitoring on such ancient laptops.When replying, please CC: yotam DOT medini AT Gmail DOT c0m regards -- yotam
--
arch/x86/Kconfighas the kconfig symbol "APM":menuconfig APM
tristate "APM (Advanced Power Management) BIOS support" depends on X86_32 && PM_SLEEP=>
/proc/apmfor battery status informationso as long as your target system is 32-bit X86, you should be OK.
Quoted 7 lines
PM_SLEEPdepends on SUSPEND || HIBERNATION. PM needs to be enabled, and SWAP has to be enabled for HIBERNATION.---
~Randy
*** Remember to useDocumentation/SubmitChecklistwhen testing your code ***
desserts: http://www.xenotime.net/linux/recipes/
Quoted 5 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
desserts: http://www.xenotime.net/linux/recipes/
The .config I ended up with does have:
CONFIG_APM=m
But no CONFIG_APM_POWER setting,
When booting the kernel, I don not have /proc/apm. I do get:
$ sudo modprobe apm
FATAL: Error inserting apm
(/lib/modules/2.6.32.yumax/kernel/arch/x86/kernel/apm.ko): No such devicePlease note that
drivers/power/Makefile:118
has:
obj-$(CONFIG_APM_POWER) += apm_power.o
Also the "/proc/apm" is created in
drivers/char/Makefile:71
obj-$(CONFIG_APM_EMULATION) += apm-emulation.o
drivers/char/apm-emulation.c:668-670
#ifdef CONFIG_PROC_FS
proc_create("apm", 0, NULL, &apm_proc_fops);
#endifAs far as I understand, CONFIG_APM is not sufficient for the creation of "/proc/apm".
-- yotam
Quoted 23 lines · On Fri, 31 Dec 2010 11:39:54 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 5 lines · On Fri, 31 Dec 2010 21:28:00 +0200 Yotam Medini wrote:
Randy,
Thanks for your quick reply.
Sorry, but the subject line should have been:
APM_POWERon x86 - Is it possible?Nope, not on X86.
Quoted 5 lines
I do get
CONFIG_APM=m
in the .config, but I am trying to get
CONFIG_APM_POWER=m
as well. So far, I do not see how.
APM_POWERdepends onAPM_EMULATION, which is not available on X86. But real APM is available on X86, so why would you needAPM_EMULATIONinstead ofAPM_FOR_REAL?Enabling APM (according to its
Kconfighelp text) provides/proc/apmbattery status information.
Quoted 14 lines · On Fri, 31 Dec 2010 11:25:04 -0800 Avery Pennarun <[email protected]> wrote:
Quoted 8 lines · Yotam Medini יותם מדיני
For a target ancient UMAX-ActionBook 530T, I am trying to compile a Linux kernel that will support apm (
/proc/apm)
for battery monitoring.
Alas, it looks like that with current 2.6.3n.* kernels it is not possible to configureCONFIG_APM_POWERon x86(/i386) architectures.Am I missing something, is there a bypass?
CONFIG_APMstill exists and can be enabled in 2.6.36 for me.Avery
Quoted 1 line · Yotam Medini
For a target ancient UMAX-ActionBook 530T, I am trying to compile
...
Quoted 3 lines
The .config I ended up with does have:
CONFIG_APM=m
But noCONFIG_APM_POWERsetting,
I don't think CONFIG_APM_POWER does what you think it does. I don't know exactly what it does, either, but if you just want to use native apm on your machine, you don't need it.
Quoted 1 line
When booting the kernel, I do not have
/proc/apm.
Well, you compiled it as a module, so it's not surprising that it wouldn't show up at boot time.
Quoted 5 lines
I do get:
$ sudo modprobe apm FATAL: Error inserting apm (/lib/modules/2.6.32.yumax/kernel/arch/x86/kernel/apm.ko): No such device
The output of 'dmesg' might be revealing here. However, it's likely that your PC doesn't actually support APM unless it's *very* old. You might want to try ACPI instead.
Hope this helps.
Avery
Quoted 6 lines · On Fri, 31 Dec 2010 13:54:59 -0800 Avery Pennarun <[email protected]> wrote:
Quoted 5 lines
I do get:
$ sudo modprobe apm FATAL: Error inserting apm (/lib/modules/2.6.32.yumax/kernel/arch/x86/kernel/apm.ko): No such device
Quoted 7 lines
The output of 'dmesg' might be revealing here. However, it's likely that your PC doesn't actually support APM unless it's *very* old. You might want to try ACPI instead.
Hope this helps.
Avery
Indeed:
$ dmesg | grep -i apm
[ 52.897795] apm: BIOS not found.
I will try to investigate this.But I clearly remember that a few years ago, I could issue:
$ cat /proc/apm and see the battery status. Then, I believe, the kernel tree used to have arch/i386.
thanks -- yotam
Quoted 13 lines · Yotam Medini
Quoted 9 lines · On Fri, 31 Dec 2010 13:54:59 -0800 Avery Pennarun <[email protected]> wrote:
Quoted 5 lines
I do get:
$ sudo modprobe apm FATAL: Error inserting apm (/lib/modules/2.6.32.yumax/kernel/arch/x86/kernel/apm.ko): No such deviceThe output of 'dmesg' might be revealing here. However, it's likely that your PC doesn't actually support APM unless it's *very* old. You might want to try ACPI instead.
Indeed:
Quoted 8 lines
$ dmesg | grep -i apm [ 52.897795] apm: BIOS not found. I will try to investigate this.But I clearly remember that a few years ago, I could issue:
$ cat /proc/apm and see the battery status. Then, I believe, the kernel tree used to have arch/i386.
arch/i386 is named arch/x86 nowadays.
It might be interesting to try an older kernel and see if you get different results. Since APM is so rare nowadays, I wouldn't be surprised to find out that the kernel has accumulated some bugs there in the intervening years.
Avery
Hi,
Quoted 5 lines · On Sat, 1 Jan 2011 00:05:58 +0200 Yotam Medini <[email protected]> wrote:
Indeed:
$ dmesg | grep -i apm [ 52.897795] apm: BIOS not found. I will try to investigate this.
Try building APM into your kernel instead of as a module and see if that makes any difference.
Signature · 3 lines
Cheers, Stephen Rothwell [email protected] http://www.canb.auug.org.au/~sfr/
Quoted 15 lines · On Fri, 31 Dec 2010 23:40:10 +0200 Yotam Medini wrote:
The .config I ended up with does have:
CONFIG_APM=m
But noCONFIG_APM_POWERsetting,
When booting the kernel, I don not have/proc/apm. I do get:$ sudo modprobe apm FATAL: Error inserting apm (/lib/modules/2.6.32.yumax/kernel/arch/x86/kernel/apm.ko): No such devicePlease note that
drivers/power/Makefile:118
has:
obj-$(CONFIG_APM_POWER) += apm_power.o
Quoted 4 lines
Also the "
/proc/apm" is created in
drivers/char/Makefile:71obj-$(CONFIG_APM_EMULATION) += apm-emulation.odrivers/char/apm-emulation.c:668-670
Hint: This is not the only place that /proc/apm is created.
Quoted 5 lines
#ifdef CONFIG_PROC_FS proc_create("apm", 0, NULL, &apm_proc_fops); #endifAs far as I understand,
CONFIG_APMis not sufficient for the creation of "/proc/apm".
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***
desserts: http://www.xenotime.net/linux/recipes/
Re: CONFIG_APM_POWER - still possible?
Using the hints I got here, I realized that /proc/apm
is supposed to be created (for x86) by:
apm_init() @ arch/x86/kernel/apm_32.c
I added some debug printk messages in some places I considered related.
Quoted 1 line
From these I learned the following:
1. In setup_arch(...) @ arch/x86/kernel/setup.c:
apm_info.bios = boot_params.apm_bios_info;
it has the value:
apm_info.bios.version == 02. In apm_init() @ arch/x86/kernel/apm_32.c:
if (apm_info.bios.version == 0 || paravirt_enabled() || machine_is_olpc()) {
printk(KERN_INFO "apm: BIOS not found.\n");
return -ENODEV;}
It gets here with
apm_info.bios.version == 0
This is why 'dmesg' shows:
apm: BIOS not found
and thus /proc/apm is not created.
3. In query_apm_bios() @ arch/x86/boot/apm.c
I added debug puts messages.
But 'dmesg' showed none of them.
Could it be that some boot-command line parameters are not well passed to the kernel?
Is the 'initrd' involved in this? I am not familiar with the 'black art' of constructing 'initrd'. I am using mkinitramfs for this.
The initrd I get does manage to bring up the kernel, the file-systems and a essentially - a running system.
I still have not tried compiling apm directly into the kernel. I may try it later, but I believe the problem lies elsewhere.
Thanks for all the tips -- yotam
Quoted 14 lines · On Fri, 31 Dec 2010 14:23:35 -0800 Randy Dunlap <[email protected]> wrote:
Quoted 9 lines · On Fri, 31 Dec 2010 23:40:10 +0200 Yotam Medini wrote:
....
$ sudo modprobe apm FATAL: Error inserting apm (/lib/modules/2.6.32.yumax/kernel/arch/x86/kernel/apm.ko): No such device .... Also the "/proc/apm" is created in drivers/char/Makefile:71 obj-$(CONFIG_APM_EMULATION) += apm-emulation.o drivers/char/apm-emulation.c:668-670Hint: This is not the only place that
/proc/apmis created.
....