Toolchain rework, take 3
cover Toolchain rework, take 3
This is the third batch of patches for the internal toolchain rework. Peter merged some of the work so this is a rebase with a few fixes and additions related to oprofile and removing
the BR2_CROSS_TOOLCHAIN_TARGET_UTILS option.
PATCH 1/10 sstrip: make it a proper package
* Convert sstrip to a proper gentargets package
* Use openwrt svn version, it's basically the same one we used
* Change the hooks from old toolchain/sstrip to new package/sstrip
* Drop the old toolchain/sstrip directory
* sstrip for the target is now in Package -> Development
--- package/Config.in | 3 + package/Makefile.in | 2 +- package/sstrip/Config.in | 7 + package/sstrip/sstrip.mk | 45 +++ toolchain/dependencies/dependencies.mk | 2 +- toolchain/sstrip/Config.in | 9 - toolchain/sstrip/sstrip.c | 467 ----------------------------- toolchain/sstrip/sstrip.mk | 70 ----- toolchain/toolchain-buildroot.mk | 1 - toolchain/toolchain-buildroot/Config.in.2 | 1 - toolchain/toolchain-crosstool-ng.mk | 1 - toolchain/toolchain-external.mk | 1 - 12 files changed, 57 insertions(+), 552 deletions(-) create mode 100644 package/sstrip/Config.in create mode 100644 package/sstrip/sstrip.mk delete mode 100644 toolchain/sstrip/Config.in delete mode 100644 toolchain/sstrip/sstrip.c delete mode 100644 toolchain/sstrip/sstrip.mk
package/Config.in +3 -0
@@ -73,6 +73,9 @@ endif source "package/pkg-config/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/sed/Config.in" +endif +source "package/sstrip/Config.in" +if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/tar/Config.in" endif endmenu
package/Makefile.in +1 -1
@@ -162,7 +162,7 @@ ifeq ($(BR2_STRIP_sstrip),y) STRIP_DISCARD_ALL:= STRIP_STRIP_UNNEEDED:= STRIP_STRIP_ALL:= -TARGET_STRIP=$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-sstrip +TARGET_STRIP=$(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-sstrip STRIPCMD=$(TARGET_STRIP) KSTRIPCMD=$(TARGET_CROSS)strip --remove-section=.comment --remove-section=.note --strip-unneeded endif
package/sstrip/Config.in new file +7 -0
@@ -0,0 +1,7 @@ +config BR2_PACKAGE_SSTRIP + bool "sstrip" + help + Small utility that removes a few bytes from an executable that + strip leaves behind. + + http://www.muppetlabs.com/~breadbox/software/elfkickers.html
package/sstrip/sstrip.mk new file +45 -0
45 lines not on this page · raw message
toolchain/dependencies/dependencies.mk +1 -1
@@ -7,7 +7,7 @@ DEPENDENCIES_HOST_PREREQ:= ifeq ($(BR2_STRIP_sstrip),y) -DEPENDENCIES_HOST_PREREQ+=sstrip_host +DEPENDENCIES_HOST_PREREQ+=host-sstrip endif # Remove duplicate entries from $(DL_TOOLS_DEPENDENCIES)
toolchain/sstrip/Config.in deleted +0 -9
@@ -1,9 +0,0 @@ -config BR2_PACKAGE_SSTRIP_TARGET - bool "Install sstrip for the target system" - help - Maximal 'strip'ing utility. - -config BR2_PACKAGE_SSTRIP_HOST - bool "Install sstrip for the host/build system" - help - Maximal 'strip'ing utility.
toolchain/sstrip/sstrip.c deleted +0 -467
467 lines not on this page · raw message
toolchain/sstrip/sstrip.mk deleted +0 -70
70 lines not on this page · raw message
toolchain/toolchain-buildroot.mk +0 -1
@@ -7,5 +7,4 @@ include toolchain/gcc/gcc-uclibc-4.x.mk include toolchain/gdb/gdb.mk include toolchain/kernel-headers/kernel-headers.mk include toolchain/mklibs/mklibs.mk -include toolchain/sstrip/sstrip.mk include toolchain/uClibc/uclibc.mk
toolchain/toolchain-buildroot/Config.in.2 +0 -1
@@ -105,7 +105,6 @@ endchoice source "toolchain/elf2flt/Config.in" source "toolchain/mklibs/Config.in" -source "toolchain/sstrip/Config.in" config BR2_VFP_FLOAT bool "Use ARM Vector Floating Point unit"
toolchain/toolchain-crosstool-ng.mk +0 -1
@@ -9,5 +9,4 @@ include toolchain/gcc/gcc-uclibc-4.x.mk include toolchain/gdb/gdb.mk include toolchain/toolchain-crosstool-ng/crosstool-ng.mk include toolchain/mklibs/mklibs.mk -include toolchain/sstrip/sstrip.mk include toolchain/uClibc/uclibc.mk
toolchain/toolchain-external.mk +0 -1
@@ -8,6 +8,5 @@ include toolchain/gcc/gcc-uclibc-4.x.mk include toolchain/gdb/gdb.mk include toolchain/kernel-headers/kernel-headers.mk include toolchain/mklibs/mklibs.mk -include toolchain/sstrip/sstrip.mk include toolchain/toolchain-external/ext-tool.mk include toolchain/uClibc/uclibc.mk
Signature · 1 line
1.7.2.2
PATCH 2/10 toolchain: move sysroot to host dir
In reply to Gustavo Zacarias* Drop the BR2_STAGING_DIR option
* Hardcode STAGING_DIR to $(HOST_DIR)/usr/TUPLE/sysroot
--- Config.in | 13 ------------ Makefile | 2 - package/Makefile.in | 54 ++++++++++++++++++++++++++------------------------ 3 files changed, 28 insertions(+), 41 deletions(-)
Config.in +0 -13
@@ -72,19 +72,6 @@ config BR2_DL_DIR The default is $(TOPDIR)/dl -config BR2_STAGING_DIR - string "Toolchain and header file location?" - default "$(BASE_DIR)/staging" - help - This is the location where the toolchain will be installed. The - toolchain will not work if it is moved from this location. - Therefore, if you wish to package up a uClibc toolchain, it is - important that is is set to the final location where the toolchain - will be used. - - Most people will leave this set to the default value of - "$(BASE_DIR)/staging". - menu "Mirrors and Download locations" config BR2_PRIMARY_SITE
Makefile +0 -2
@@ -268,8 +268,6 @@ TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf GNU_TARGET_SUFFIX:=-$(call qstrip,$(BR2_GNU_TARGET_SUFFIX)) -STAGING_DIR:=$(call qstrip,$(BR2_STAGING_DIR)) - # packages compiled for the host goes here HOST_DIR:=$(BASE_DIR)/host
package/Makefile.in +28 -26
66 lines not on this page · raw message
Signature · 1 line
1.7.2.2
PATCH 3/10 uclibc: move tools to host dir
In reply to Gustavo ZacariasMove uclibc host tools (ldd/ldconfig) to host dir. They were previously installed in the staging dir.
--- toolchain/uClibc/uclibc.mk | 12 ++++++------ 1 files changed, 6 insertions(+), 6 deletions(-)
toolchain/uClibc/uclibc.mk +6 -6
@@ -450,17 +450,17 @@ $(STAGING_DIR)/usr/lib/libc.a: $(UCLIBC_DIR)/lib/libc.a fi # Build the host utils. Need to add an install target... $(MAKE1) -C $(UCLIBC_DIR)/utils \ - PREFIX=$(STAGING_DIR) \ + PREFIX=$(HOST_DIR) \ HOSTCC="$(HOSTCC)" \ hostutils if [ -f $(UCLIBC_DIR)/utils/ldd.host ]; then \ - install -c $(UCLIBC_DIR)/utils/ldd.host $(STAGING_DIR)/usr/bin/ldd; \ - ln -sf ldd $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldd; \ + install -D $(UCLIBC_DIR)/utils/ldd.host $(HOST_DIR)/usr/bin/ldd; \ + ln -sf ldd $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldd; \ fi if [ -f $(UCLIBC_DIR)/utils/ldconfig.host ]; then \ - install -c $(UCLIBC_DIR)/utils/ldconfig.host $(STAGING_DIR)/usr/bin/ldconfig; \ - ln -sf ldconfig $(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldconfig; \ - ln -sf ldconfig $(STAGING_DIR)/usr/bin/$(GNU_TARGET_NAME)-ldconfig; \ + install -D $(UCLIBC_DIR)/utils/ldconfig.host $(HOST_DIR)/usr/bin/ldconfig; \ + ln -sf ldconfig $(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-ldconfig; \ + ln -sf ldconfig $(HOST_DIR)/usr/bin/$(GNU_TARGET_NAME)-ldconfig; \ fi touch -c $@
Signature · 1 line
1.7.2.2
PATCH 4/10 binutils: make it a proper package
In reply to Gustavo Zacarias* Convert binutils to a proper autotargets package
* Add version 2.21
* Drop version 2.17
* Hook up packaged binutils for target gcc
* Build tools are on HOST_DIR now so change it
* TARGET_CROSS is now in HOST_DIR too
---
Makefile | 4 +-
package/Config.in | 1 +
package/Makefile.in | 2 +-
package/binutils/Config.in | 22 +++
.../Config.in => package/binutils/Config.in.host | 17 +-
.../binutils-2.18}/100-makeinfo-version.patch | 0
.../binutils-2.18}/110-arm-eabi-conf.patch | 0
.../binutils-2.18}/300-001_ld_makefile_patch.patch | 0
.../300-012_check_ldrunpath_length.patch | 0
.../binutils-2.19.1}/110-arm-eabi-conf.patch | 0
.../binutils/binutils-2.19.1}/120-sh-conf.patch | 0
.../300-001_ld_makefile_patch.patch | 0
.../300-012_check_ldrunpath_length.patch | 0
.../binutils-2.19}/110-arm-eabi-conf.patch | 0
.../binutils/binutils-2.19}/120-sh-conf.patch | 0
.../binutils-2.19}/300-001_ld_makefile_patch.patch | 0
.../300-012_check_ldrunpath_length.patch | 0
.../binutils-2.20.1}/110-arm-eabi-conf.patch | 0
.../binutils/binutils-2.20.1}/120-sh-conf.patch | 0
.../300-001_ld_makefile_patch.patch | 0
.../300-012_check_ldrunpath_length.patch | 0
.../binutils-2.20.1}/400-arm_link_speed.patch | 0
.../binutils-2.20}/110-arm-eabi-conf.patch | 0
.../binutils/binutils-2.20}/120-sh-conf.patch | 0
.../binutils-2.20}/300-001_ld_makefile_patch.patch | 0
.../300-012_check_ldrunpath_length.patch | 0
.../binutils-2.20}/400-arm_link_speed.patch | 0
.../binutils-2.21}/110-arm-eabi-conf.patch | 0
.../binutils/binutils-2.21}/120-sh-conf.patch | 0
.../binutils-2.21}/300-001_ld_makefile_patch.patch | 0
.../300-012_check_ldrunpath_length.patch | 21 +++
package/binutils/binutils.mk | 68 ++++++++
toolchain/Makefile.in | 2 +-
toolchain/binutils/2.17/100-uclibc-conf.patch | 139 ---------------
toolchain/binutils/2.17/110-arm-eabi-conf.patch | 24 ---
.../binutils/2.17/300-001_ld_makefile_patch.patch | 50 ------
.../binutils/2.17/300-006_better_file_error.patch | 43 -----
.../2.17/300-012_check_ldrunpath_length.patch | 47 -----
.../2.17/400-mips-ELF_MAXPAGESIZE-4K.patch | 26 ---
.../binutils/2.17/500-fix-makeinfo-check.patch | 17 --
toolchain/binutils/binutils.mk | 179 --------------------
toolchain/gcc/Config.in.2 | 1 +
toolchain/gcc/gcc-uclibc-4.x.mk | 66 +++-----
toolchain/toolchain-buildroot.mk | 1 -
toolchain/toolchain-buildroot/Config.in | 2 +-
toolchain/toolchain-crosstool-ng.mk | 1 -
toolchain/toolchain-external.mk | 1 -
47 files changed, 148 insertions(+), 586 deletions(-)
create mode 100644 package/binutils/Config.in
rename toolchain/binutils/Config.in => package/binutils/Config.in.host (83%)
rename {toolchain/binutils/2.18 => package/binutils/binutils-2.18}/100-makeinfo-version.patch (100%)
rename {toolchain/binutils/2.18 => package/binutils/binutils-2.18}/110-arm-eabi-conf.patch (100%)
copy {toolchain/binutils/2.18 => package/binutils/binutils-2.18}/300-001_ld_makefile_patch.patch (100%)
rename {toolchain/binutils/2.18 => package/binutils/binutils-2.18}/300-012_check_ldrunpath_length.patch (100%)
copy {toolchain/binutils/2.19.1 => package/binutils/binutils-2.19.1}/110-arm-eabi-conf.patch (100%)
copy {toolchain/binutils/2.19.1 => package/binutils/binutils-2.19.1}/120-sh-conf.patch (100%)
rename {toolchain/binutils/2.19.1 => package/binutils/binutils-2.19.1}/300-001_ld_makefile_patch.patch (100%)
rename {toolchain/binutils/2.19.1 => package/binutils/binutils-2.19.1}/300-012_check_ldrunpath_length.patch (100%)
rename {toolchain/binutils/2.19 => package/binutils/binutils-2.19}/110-arm-eabi-conf.patch (100%)
rename {toolchain/binutils/2.19 => package/binutils/binutils-2.19}/120-sh-conf.patch (100%)
rename {toolchain/binutils/2.19 => package/binutils/binutils-2.19}/300-001_ld_makefile_patch.patch (100%)
rename {toolchain/binutils/2.19 => package/binutils/binutils-2.19}/300-012_check_ldrunpath_length.patch (100%)
rename {toolchain/binutils/2.20.1 => package/binutils/binutils-2.20.1}/110-arm-eabi-conf.patch (100%)
rename {toolchain/binutils/2.20.1 => package/binutils/binutils-2.20.1}/120-sh-conf.patch (100%)
rename {toolchain/binutils/2.20.1 => package/binutils/binutils-2.20.1}/300-001_ld_makefile_patch.patch (100%)
rename {toolchain/binutils/2.20.1 => package/binutils/binutils-2.20.1}/300-012_check_ldrunpath_length.patch (100%)
rename {toolchain/binutils/2.20.1 => package/binutils/binutils-2.20.1}/400-arm_link_speed.patch (100%)
rename {toolchain/binutils/2.20 => package/binutils/binutils-2.20}/110-arm-eabi-conf.patch (100%)
rename {toolchain/binutils/2.20 => package/binutils/binutils-2.20}/120-sh-conf.patch (100%)
rename {toolchain/binutils/2.20 => package/binutils/binutils-2.20}/300-001_ld_makefile_patch.patch (100%)
rename {toolchain/binutils/2.20 => package/binutils/binutils-2.20}/300-012_check_ldrunpath_length.patch (100%)
rename {toolchain/binutils/2.20 => package/binutils/binutils-2.20}/400-arm_link_speed.patch (100%)
rename {toolchain/binutils/2.19.1 => package/binutils/binutils-2.21}/110-arm-eabi-conf.patch (100%)
rename {toolchain/binutils/2.19.1 => package/binutils/binutils-2.21}/120-sh-conf.patch (100%)
rename {toolchain/binutils/2.18 => package/binutils/binutils-2.21}/300-001_ld_makefile_patch.patch (100%)
create mode 100644 package/binutils/binutils-2.21/300-012_check_ldrunpath_length.patch
create mode 100644 package/binutils/binutils.mk
delete mode 100644 toolchain/binutils/2.17/100-uclibc-conf.patch
delete mode 100644 toolchain/binutils/2.17/110-arm-eabi-conf.patch
delete mode 100644 toolchain/binutils/2.17/300-001_ld_makefile_patch.patch
delete mode 100644 toolchain/binutils/2.17/300-006_better_file_error.patch
delete mode 100644 toolchain/binutils/2.17/300-012_check_ldrunpath_length.patch
delete mode 100644 toolchain/binutils/2.17/400-mips-ELF_MAXPAGESIZE-4K.patch
delete mode 100644 toolchain/binutils/2.17/500-fix-makeinfo-check.patch
delete mode 100644 toolchain/binutils/binutils.mkMakefile +2 -2
@@ -239,7 +239,7 @@ BASE_TARGETS += host-ccache endif ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) -BASE_TARGETS += uclibc-configured binutils cross_compiler uclibc-target-utils kernel-headers +BASE_TARGETS += uclibc-configured host-binutils cross_compiler uclibc-target-utils kernel-headers else BASE_TARGETS += uclibc endif
@@ -612,7 +612,7 @@ endif configured: dirs kernel-headers uclibc-config busybox-config linux26-config -prepatch: gcc-patched binutils-patched gdb-patched uclibc-patched +prepatch: gcc-patched gdb-patched uclibc-patched cross: $(BASE_TARGETS)
package/Config.in +1 -0
@@ -35,6 +35,7 @@ endmenu menu "Development tools" source "package/autoconf/Config.in" source "package/automake/Config.in" +source "package/binutils/Config.in" source "package/bison/Config.in" source "package/bsdiff/Config.in" source "package/ccache/Config.in"
package/Makefile.in +1 -1
@@ -114,7 +114,7 @@ TARGET_CXXFLAGS=$(TARGET_CFLAGS) TARGET_SYSROOT_OPT=--sysroot=$(STAGING_DIR) ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y) -TARGET_CROSS=$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)- +TARGET_CROSS=$(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)- else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y) TOOLCHAIN_EXTERNAL_PREFIX=$(call qstrip,$(BR2_TOOLCHAIN_EXTERNAL_PREFIX)) ifeq ($(BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD),y)
package/binutils/Config.in new file +22 -0
@@ -0,0 +1,22 @@ +config BR2_PACKAGE_BINUTILS + bool + depends on BR2_TOOLCHAIN_BUILDROOT + default y if BR2_PACKAGE_BINUTILS_TARGET || BR2_PACKAGE_BINUTILS_LIBBFD + +config BR2_PACKAGE_BINUTILS_TARGET + bool "binutils" + select BR2_PACKAGE_MPC if BR2_GCC_VERSION_4_5_X + select BR2_PACKAGE_MPFR + select BR2_PACKAGE_GMP + help + The GNU Binutils are a collection of binary tools. + + http://www.gnu.org/software/binutils/ + +config BR2_PACKAGE_BINUTILS_LIBBFD + bool + help + Install libbfd from binutils in the target. + + This option is currently used by oprofile to just install + the minimum libbfd needed instead of a full-blown binutils.
package/binutils/Config.in.host renamed from toolchain/binutils/Config.in +7 -10
@@ -1,18 +1,11 @@ -# Choose binutils version. - comment "Binutils Options" choice prompt "Binutils Version" - default BR2_BINUTILS_VERSION_2_20_1 + default BR2_BINUTILS_VERSION_2_21 help Select the version of binutils you wish to use. - config BR2_BINUTILS_VERSION_2_17 - depends on !BR2_avr32 - depends on BR2_DEPRECATED - bool "binutils 2.17" - config BR2_BINUTILS_VERSION_2_18 depends on !BR2_avr32 depends on BR2_DEPRECATED
@@ -40,19 +33,23 @@ choice depends on !BR2_avr32 bool "binutils 2.20.1" + config BR2_BINUTILS_VERSION_2_21 + depends on !BR2_avr32 + bool "binutils 2.21" + endchoice config BR2_BINUTILS_VERSION string - default "2.17" if BR2_BINUTILS_VERSION_2_17 default "2.18" if BR2_BINUTILS_VERSION_2_18 default "2.18-avr32-1.0.1" if BR2_BINUTILS_VERSION_2_18_AVR32_1_0_1 default "2.19" if BR2_BINUTILS_VERSION_2_19 default "2.19.1" if BR2_BINUTILS_VERSION_2_19_1 default "2.20" if BR2_BINUTILS_VERSION_2_20 default "2.20.1" if BR2_BINUTILS_VERSION_2_20_1 + default "2.21" if BR2_BINUTILS_VERSION_2_21 -config BR2_EXTRA_BINUTILS_CONFIG_OPTIONS +config BR2_BINUTILS_EXTRA_CONFIG_OPTIONS string "Additional binutils options" default "" help
package/binutils/binutils-2.18/100-makeinfo-version.patch renamed from toolchain/binutils/2.18/100-makeinfo-version.patch +0 -0
package/binutils/binutils-2.18/110-arm-eabi-conf.patch renamed from toolchain/binutils/2.18/110-arm-eabi-conf.patch +0 -0
package/binutils/binutils-2.18/300-001_ld_makefile_patch.patch renamed from toolchain/binutils/2.18/300-001_ld_makefile_patch.patch +0 -0
package/binutils/binutils-2.18/300-012_check_ldrunpath_length.patch renamed from toolchain/binutils/2.18/300-012_check_ldrunpath_length.patch +0 -0
package/binutils/binutils-2.19.1/110-arm-eabi-conf.patch renamed from toolchain/binutils/2.19.1/110-arm-eabi-conf.patch +0 -0
package/binutils/binutils-2.19.1/120-sh-conf.patch renamed from toolchain/binutils/2.19.1/120-sh-conf.patch +0 -0
package/binutils/binutils-2.19.1/300-001_ld_makefile_patch.patch renamed from toolchain/binutils/2.19.1/300-001_ld_makefile_patch.patch +0 -0
package/binutils/binutils-2.19.1/300-012_check_ldrunpath_length.patch renamed from toolchain/binutils/2.19.1/300-012_check_ldrunpath_length.patch +0 -0
package/binutils/binutils-2.19/110-arm-eabi-conf.patch renamed from toolchain/binutils/2.19/110-arm-eabi-conf.patch +0 -0
package/binutils/binutils-2.19/120-sh-conf.patch renamed from toolchain/binutils/2.19/120-sh-conf.patch +0 -0
package/binutils/binutils-2.19/300-001_ld_makefile_patch.patch renamed from toolchain/binutils/2.19/300-001_ld_makefile_patch.patch +0 -0
package/binutils/binutils-2.19/300-012_check_ldrunpath_length.patch renamed from toolchain/binutils/2.19/300-012_check_ldrunpath_length.patch +0 -0
package/binutils/binutils-2.20.1/110-arm-eabi-conf.patch renamed from toolchain/binutils/2.20.1/110-arm-eabi-conf.patch +0 -0
package/binutils/binutils-2.20.1/120-sh-conf.patch renamed from toolchain/binutils/2.20.1/120-sh-conf.patch +0 -0
package/binutils/binutils-2.20.1/300-001_ld_makefile_patch.patch renamed from toolchain/binutils/2.20.1/300-001_ld_makefile_patch.patch +0 -0
package/binutils/binutils-2.20.1/300-012_check_ldrunpath_length.patch renamed from toolchain/binutils/2.20.1/300-012_check_ldrunpath_length.patch +0 -0
package/binutils/binutils-2.20.1/400-arm_link_speed.patch renamed from toolchain/binutils/2.20.1/400-arm_link_speed.patch +0 -0
package/binutils/binutils-2.20/110-arm-eabi-conf.patch renamed from toolchain/binutils/2.20/110-arm-eabi-conf.patch +0 -0
package/binutils/binutils-2.20/120-sh-conf.patch renamed from toolchain/binutils/2.20/120-sh-conf.patch +0 -0
package/binutils/binutils-2.20/300-001_ld_makefile_patch.patch renamed from toolchain/binutils/2.20/300-001_ld_makefile_patch.patch +0 -0
package/binutils/binutils-2.20/300-012_check_ldrunpath_length.patch renamed from toolchain/binutils/2.20/300-012_check_ldrunpath_length.patch +0 -0
package/binutils/binutils-2.20/400-arm_link_speed.patch renamed from toolchain/binutils/2.20/400-arm_link_speed.patch +0 -0
package/binutils/binutils-2.21/110-arm-eabi-conf.patch renamed from toolchain/binutils/2.19.1/110-arm-eabi-conf.patch +0 -0
package/binutils/binutils-2.21/120-sh-conf.patch renamed from toolchain/binutils/2.19.1/120-sh-conf.patch +0 -0
package/binutils/binutils-2.21/300-001_ld_makefile_patch.patch renamed from toolchain/binutils/2.18/300-001_ld_makefile_patch.patch +0 -0
package/binutils/binutils-2.21/300-012_check_ldrunpath_length.patch new file +21 -0
@@ -0,0 +1,21 @@ +diff -Nura binutils-2.21.orig/ld/emultempl/elf32.em binutils-2.21/ld/emultempl/elf32.em +--- binutils-2.21.orig/ld/emultempl/elf32.em 2010-10-29 09:10:36.000000000 -0300 ++++ binutils-2.21/ld/emultempl/elf32.em 2010-12-10 09:26:56.746102724 -0300 +@@ -1270,6 +1270,8 @@ + && command_line.rpath == NULL) + { + lib_path = (const char *) getenv ("LD_RUN_PATH"); ++ if ((lib_path) && (strlen (lib_path) == 0)) ++ lib_path = NULL; + if (gld${EMULATION_NAME}_search_needed (lib_path, &n, + force)) + break; +@@ -1497,6 +1499,8 @@ + rpath = command_line.rpath; + if (rpath == NULL) + rpath = (const char *) getenv ("LD_RUN_PATH"); ++ if ((rpath) && (strlen (rpath) == 0)) ++ rpath = NULL; + + for (abfd = link_info.input_bfds; abfd; abfd = abfd->link_next) + if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)
package/binutils/binutils.mk new file +68 -0
68 lines not on this page · raw message
toolchain/Makefile.in +1 -1
@@ -1,6 +1,6 @@ BR2_CONFIGURE_DEVEL_SYSROOT=--with-sysroot=$(TOOLCHAIN_DIR)/uClibc_dev/ BR2_CONFIGURE_STAGING_SYSROOT=--with-sysroot=$(STAGING_DIR) -BR2_CONFIGURE_BUILD_TOOLS=--with-build-time-tools=$(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin +BR2_CONFIGURE_BUILD_TOOLS=--with-build-time-tools=$(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/bin # gcc has a bunch of needed stuff.... include toolchain/gcc/Makefile.in
toolchain/binutils/2.17/100-uclibc-conf.patch deleted +0 -139
139 lines not on this page · raw message
toolchain/binutils/2.17/110-arm-eabi-conf.patch deleted +0 -24
@@ -1,24 +0,0 @@ -diff -urN binutils-2.16.91.0.7.orig/configure binutils-2.16.91.0.7/configure ---- binutils-2.16.91.0.7.orig/configure 2006-05-31 14:54:24.000000000 +0300 -+++ binutils-2.16.91.0.7/configure 2006-05-31 14:55:53.000000000 +0300 -@@ -1299,7 +1299,7 @@ - arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* ) - noconfigdirs="$noconfigdirs target-libffi target-qthreads" - ;; -- arm*-*-linux-gnueabi) -+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi) - noconfigdirs="$noconfigdirs target-libffi target-qthreads" - noconfigdirs="$noconfigdirs target-libjava target-libobjc" - ;; -diff -urN binutils-2.16.91.0.7.orig/configure.in binutils-2.16.91.0.7/configure.in ---- binutils-2.16.91.0.7.orig/configure.in 2006-05-31 14:54:24.000000000 +0300 -+++ binutils-2.16.91.0.7/configure.in 2006-05-31 14:55:53.000000000 +0300 -@@ -497,7 +497,7 @@ - arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* ) - noconfigdirs="$noconfigdirs target-libffi target-qthreads" - ;; -- arm*-*-linux-gnueabi) -+ arm*-*-linux-gnueabi | arm*-*-linux-uclibcgnueabi) - noconfigdirs="$noconfigdirs target-libffi target-qthreads" - noconfigdirs="$noconfigdirs target-libjava target-libobjc" - ;;
toolchain/binutils/2.17/300-001_ld_makefile_patch.patch deleted +0 -50
50 lines not on this page · raw message
toolchain/binutils/2.17/300-006_better_file_error.patch deleted +0 -43
43 lines not on this page · raw message
toolchain/binutils/2.17/300-012_check_ldrunpath_length.patch deleted +0 -47
47 lines not on this page · raw message
toolchain/binutils/2.17/400-mips-ELF_MAXPAGESIZE-4K.patch deleted +0 -26
@@ -1,26 +0,0 @@ ---- binutils/bfd/elf32-mips.c~ -+++ binutils/bfd/elf32-mips.c -@@ -1613,7 +1613,9 @@ - - /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses - page sizes of up to that limit, so we need to respect it. */ --#define ELF_MAXPAGESIZE 0x10000 -+/*#define ELF_MAXPAGESIZE 0x10000*/ -+/* Use 4K to shrink the elf header. NOT for general use! */ -+#define ELF_MAXPAGESIZE 0x1000 - #define elf32_bed elf32_tradbed - - /* Include the target file again for this target. */ ---- binutils/bfd/elfn32-mips.c~ -+++ binutils/bfd/elfn32-mips.c -@@ -2399,7 +2399,9 @@ - - /* The SVR4 MIPS ABI says that this should be 0x10000, and Linux uses - page sizes of up to that limit, so we need to respect it. */ --#define ELF_MAXPAGESIZE 0x10000 -+/*#define ELF_MAXPAGESIZE 0x10000*/ -+/* Use 4K to shrink the elf header. NOT for general use! */ -+#define ELF_MAXPAGESIZE 0x1000 - #define elf32_bed elf32_tradbed - - /* Include the target file again for this target. */
toolchain/binutils/2.17/500-fix-makeinfo-check.patch deleted +0 -17
@@ -1,17 +0,0 @@ ---- - configure | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -Index: binutils-2.17/configure -=================================================================== ---- binutils-2.17.orig/configure -+++ binutils-2.17/configure -@@ -3637,7 +3637,7 @@ - # For an installed makeinfo, we require it to be from texinfo 4.4 or - # higher, else we use the "missing" dummy. - if ${MAKEINFO} --version \ -- | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then -+ | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|4\.[1-9][0-9]|[5-9])' >/dev/null 2>&1; then - : - else - MAKEINFO="$MISSING makeinfo"
toolchain/binutils/binutils.mk deleted +0 -179
179 lines not on this page · raw message
toolchain/gcc/Config.in.2 +1 -0
@@ -1,6 +1,7 @@ config BR2_PACKAGE_GCC_TARGET bool "native toolchain in the target filesystem" depends on BR2_HAVE_DEVFILES + select BR2_PACKAGE_BINUTILS_TARGET help If you want the target system to be able to run binutils/gcc and compile native code, say Y here.
toolchain/gcc/gcc-uclibc-4.x.mk +23 -43
184 lines not on this page · raw message
toolchain/toolchain-buildroot.mk +0 -1
@@ -1,7 +1,6 @@ # Include files required for the internal toolchain backend include toolchain/dependencies/dependencies.mk -include toolchain/binutils/binutils.mk include toolchain/elf2flt/elf2flt.mk include toolchain/gcc/gcc-uclibc-4.x.mk include toolchain/gdb/gdb.mk
toolchain/toolchain-buildroot/Config.in +1 -1
@@ -3,6 +3,6 @@ if BR2_TOOLCHAIN_BUILDROOT source "toolchain/kernel-headers/Config.in" source "toolchain/uClibc/Config.in" -source "toolchain/binutils/Config.in" +source "package/binutils/Config.in.host" source "toolchain/gcc/Config.in" endif
toolchain/toolchain-crosstool-ng.mk +0 -1
@@ -2,7 +2,6 @@ # Explicit ordering: include toolchain/helpers.mk -include toolchain/binutils/binutils.mk include toolchain/dependencies/dependencies.mk include toolchain/elf2flt/elf2flt.mk include toolchain/gcc/gcc-uclibc-4.x.mk
toolchain/toolchain-external.mk +0 -1
@@ -1,7 +1,6 @@ # Required includes for the external toolchain backend include toolchain/helpers.mk -include toolchain/binutils/binutils.mk include toolchain/dependencies/dependencies.mk include toolchain/elf2flt/elf2flt.mk include toolchain/gcc/gcc-uclibc-4.x.mk
Signature · 1 line
1.7.2.2
PATCH 4/10 binutils: make it a proper package
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Hi,
Gustavo> * Convert binutils to a proper autotargets package Gustavo> * Add version 2.21
Gustavo> * Drop version 2.17
Gustavo> * Hook up packaged binutils for target gcc Gustavo> * Build tools are on HOST_DIR now so change it Gustavo> * TARGET_CROSS is now in HOST_DIR too
Gustavo> diff --git a/package/Config.in b/package/Config.in Gustavo> index 27d8023..fb47e27 100644
Gustavo> --- a/package/Config.in
Gustavo> +++ b/package/Config.in
Gustavo> @@ -35,6 +35,7 @@ endmenu
Gustavo> menu "Development tools" Gustavo> source "package/autoconf/Config.in" Gustavo> source "package/automake/Config.in" Gustavo> +source "package/binutils/Config.in" Gustavo> source "package/bison/Config.in" Gustavo> source "package/bsdiff/Config.in" Gustavo> source "package/ccache/Config.in"
Gustavo> diff --git a/package/Makefile.in b/package/Makefile.in Gustavo> index 9765a1a..983f9f5 100644
Gustavo> --- a/package/Makefile.in
Gustavo> +++ b/package/Makefile.in
Gustavo> @@ -114,7 +114,7 @@ TARGET_CXXFLAGS=$(TARGET_CFLAGS) Gustavo> TARGET_SYSROOT_OPT=--sysroot=$(STAGING_DIR)
Gustavo> ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
Gustavo> -TARGET_CROSS=$(STAGING_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)- Gustavo> +TARGET_CROSS=$(HOST_DIR)/usr/bin/$(REAL_GNU_TARGET_NAME)-
Seeing this I thought the build would be broken because GCC isn't moved yet, but I see you do move it later on in this patch, even if it isn't mentioned in the commit message.
Gustavo> +config BR2_PACKAGE_BINUTILS
Gustavo> + bool
Gustavo> + depends on BR2_TOOLCHAIN_BUILDROOT
Gustavo> + default y if BR2_PACKAGE_BINUTILS_TARGET || BR2_PACKAGE_BINUTILS_LIBBFD
Gustavo> +
Gustavo> +config BR2_PACKAGE_BINUTILS_TARGET
Gustavo> + bool "binutils"
Gustavo> + select BR2_PACKAGE_MPC if BR2_GCC_VERSION_4_5_X
Gustavo> + select BR2_PACKAGE_MPFR
Gustavo> + select BR2_PACKAGE_GMP
Gustavo> + help
Gustavo> + The GNU Binutils are a collection of binary tools.
Gustavo> +
Gustavo> + http://www.gnu.org/software/binutils/
Gustavo> +
Gustavo> +config BR2_PACKAGE_BINUTILS_LIBBFD
Gustavo> + bool
Gustavo> + help
Gustavo> + Install libbfd from binutils in the target.
Gustavo> +
Gustavo> + This option is currently used by oprofile to just install
Gustavo> + the minimum libbfd needed instead of a full-blown binutils.
I find this quite complicated. I would prefer something like:
config BR2_PACKAGE_BINUTILS
bool "binutils"
depends on BR2_TOOLCHAIN_BUILDROOT
help
..
config BR2_PACKAGE_BINUTILS_FULLINSTALL
bool "perform full installation"
depends on BR2_PACKAGE_BINUTILS
help
Select this to install all binary utilies and not just libbfd.
And then move the MPC/MPFR/GMP selects under BR2_PACKAGE_GCC_TARGET. Also add selects for BR2_PACKAGE_BINUTILS + FULLINSTALL.
Gustavo> +++ b/package/binutils/binutils.mk
Gustavo> @@ -0,0 +1,68 @@
Gustavo> +############################################################# Gustavo> +#
Gustavo> +# binutils
Gustavo> +#
Gustavo> +############################################################# Gustavo> +
Gustavo> +BINUTILS_VERSION = $(call qstrip,$(BR2_BINUTILS_VERSION))
Gustavo> +BINUTILS_SOURCE = binutils-$(BINUTILS_VERSION).tar.bz2
Gustavo> +BINUTILS_SITE = $(BR2_GNU_MIRROR)/binutils
Gustavo> +ifeq ($(ARCH),avr32)
Gustavo> +BINUTILS_SITE = ftp://www.at91.com/pub/buildroot
Gustavo> +endif
Gustavo> +BINUTILS_EXTRA_CONFIG_OPTIONS = $(call qstrip,$(BR2_BINUTILS_EXTRA_CONFIG_OPTIONS)) Gustavo> +BINUTILS_INSTALL_STAGING = YES
Gustavo> +
Gustavo> +# These aren't really needed, we just pull them until gcc is a proper package Gustavo> +ifeq ($(BR2_PACKAGE_BINUTILS_TARGET),y)
Gustavo> +BINUTILS_DEPENDENCIES = gmp mpfr
Gustavo> +ifeq ($(BR2_GCC_VERSION_4_5_X),y)
You have trailing spaces here and elsewhere.
Gustavo> +++ b/toolchain/gcc/gcc-uclibc-4.x.mk
Gustavo> @@ -53,9 +53,6 @@ else
Gustavo> GCC_OPTSPACE=--enable-target-optspace
Gustavo> endif
Gustavo> -GCC_TARGET_PREREQ=
Gustavo> -GCC_STAGING_PREREQ=
Gustavo> -
Gustavo> ############################################################# Gustavo> # Gustavo> # Setup some initial stuff
Gustavo> @@ -203,17 +200,12 @@ endif
Gustavo> ############################################################# Gustavo> GCC_BUILD_DIR1:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION)-initial
Gustavo> -
Gustavo> -# The --without-headers option stopped working with gcc 3.0 and has never been Gustavo> -# fixed, so we need to actually have working C library header files prior to Gustavo> -# the step or libgcc will not build...
Gustavo> -
Gustavo> $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched Gustavo> mkdir -p $(GCC_BUILD_DIR1) Gustavo> (cd $(GCC_BUILD_DIR1); rm -rf config.cache; \ Gustavo> $(HOST_CONFIGURE_OPTS) \ Gustavo> $(GCC_DIR)/configure $(QUIET) \ Gustavo> - --prefix=$(STAGING_DIR)/usr \ Gustavo> + --prefix=$(HOST_DIR)/usr \ Gustavo> --build=$(GNU_HOST_NAME) \ Gustavo> --host=$(GNU_HOST_NAME) \ Gustavo> --target=$(REAL_GNU_TARGET_NAME) \
Gustavo> @@ -243,7 +235,6 @@ $(GCC_BUILD_DIR1)/.configured: $(GCC_DIR)/.patched
Gustavo> touch $@
Gustavo> $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
Gustavo> - # gcc >= 4.3.0 have to also build all-target-libgcc
Why are you removing those comments? We still support gcc 4.2.x
Gustavo> ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y) Gustavo> $(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc Gustavo> else
Gustavo> @@ -276,22 +262,16 @@ gcc_initial-dirclean:
Gustavo> ############################################################# Gustavo> GCC_BUILD_DIR2:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION)-intermediate
Gustavo> -
Gustavo> # The --without-headers option stopped working with gcc 3.0 and has never been Gustavo> # fixed, so we need to actually have working C library header files prior to Gustavo> # the step or libgcc will not build...
Gustavo> $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched
Gustavo> mkdir -p $(GCC_BUILD_DIR2)
Gustavo> - -rmdir $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
Gustavo> - mkdir -p $(STAGING_DIR)/lib
Gustavo> - ln -snf ../../lib $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
Gustavo> - $(if $(BR2_ARCH_IS_64),mkdir -p $(STAGING_DIR)/lib64)
Gustavo> - $(if $(BR2_ARCH_IS_64),ln -snf ../../lib64 $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib64)
Why remove this ARCH_IS_64 stuff?
Signature · 1 line
Bye, Peter Korsgaard
PATCH 4/10 binutils: make it a proper package
Quoted 3 lines · Peter Korsgaard
Seeing this I thought the build would be broken because GCC isn't moved yet, but I see you do move it later on in this patch, even if it isn't mentioned in the commit message.
Comment added.
Quoted 14 lines
I find this quite complicated. I would prefer something like:
config
BR2_PACKAGE_BINUTILS
bool "binutils"
depends onBR2_TOOLCHAIN_BUILDROOT
help
..config
BR2_PACKAGE_BINUTILS_FULLINSTALL
bool "perform full installation"
depends onBR2_PACKAGE_BINUTILS
help
Select this to install all binary utilies and not just libbfd.
Quoted 3 lines
And then move the MPC/MPFR/GMP selects under
BR2_PACKAGE_GCC_TARGET. Also add selects forBR2_PACKAGE_BINUTILS+ FULLINSTALL.
Easier to define BR2_PACKAGE_BINUTILS that builds all
of binutils and only installs libbfd + BR2_PACKAGE_BINUTILS_TARGET to install the full version.
Quoted 1 line
You have trailing spaces here and elsewhere.
Hopefully fixed.
Quoted 9 lines
Gustavo> -
Gustavo> -# The --without-headers option stopped working with gcc 3.0 and has never been Gustavo> -# fixed, so we need to actually have working C library header files prior to Gustavo> -# the step or libgcc will not build...Gustavo> $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
Gustavo> - # gcc >= 4.3.0 have to also build all-target-libgccWhy are you removing those comments? We still support gcc 4.2.x
Because these are in STAGE1 (DIR1) where it's completely irrelevant / doesn't apply and just amounts to misinformation. gcc-initial doesn't use nor install headers since the extra gcc build stage was added. Same scenario for libgcc.
They're leftover comments. That's the reason i kept the ones in gcc-intermediate.
Quoted 20 lines
Gustavo> ifeq ($(BR2_GCC_SUPPORTS_FINEGRAINEDMTUNE),y) Gustavo> $(GCC_CONF_ENV) $(MAKE) -C $(GCC_BUILD_DIR1) all-gcc Gustavo> elseGustavo> @@ -276,22 +262,16 @@ gcc_initial-dirclean:
Gustavo> ############################################################# Gustavo> GCC_BUILD_DIR2:=$(TOOLCHAIN_DIR)/gcc-$(GCC_VERSION)-intermediateGustavo> -
Gustavo> # The --without-headers option stopped working with gcc 3.0 and has never been Gustavo> # fixed, so we need to actually have working C library header files prior to Gustavo> # the step or libgcc will not build...Gustavo> $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched
Gustavo> mkdir -p $(GCC_BUILD_DIR2)
Gustavo> - -rmdir $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
Gustavo> - mkdir -p $(STAGING_DIR)/lib
Gustavo> - ln -snf ../../lib $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
Gustavo> - $(if $(BR2_ARCH_IS_64),mkdir -p $(STAGING_DIR)/lib64)
Gustavo> - $(if $(BR2_ARCH_IS_64),ln -snf ../../lib64 $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib64)
Quoted 1 line
Why remove this
ARCH_IS_64stuff?
This is from commit 3c77bab2eeace3ee675bd745ca335fa3dd1630bb which does a symlink trick to make libstdc++ available. It's simpler to just copy libstdc++ (and libgcj/libgcc while at it) to the sysroot which is fixed in patch #5 from my series.
PATCH 4/10 binutils: make it a proper package
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Quoted 3 lines · Peter Korsgaard
Quoted 3 lines
Seeing this I thought the build would be broken because GCC isn't moved yet, but I see you do move it later on in this patch, even if it isn't mentioned in the commit message.
Gustavo> Comment added.
Thanks.
Quoted 14 lines
Quoted 14 lines
I find this quite complicated. I would prefer something like:
config
BR2_PACKAGE_BINUTILS
bool "binutils"
depends onBR2_TOOLCHAIN_BUILDROOT
help
..config
BR2_PACKAGE_BINUTILS_FULLINSTALL
bool "perform full installation"
depends onBR2_PACKAGE_BINUTILS
help
Select this to install all binary utilies and not just libbfd.
Quoted 3 lines
Quoted 3 lines
And then move the MPC/MPFR/GMP selects under
BR2_PACKAGE_GCC_TARGET. Also add selects forBR2_PACKAGE_BINUTILS+ FULLINSTALL.
Gustavo> Easier to define BR2_PACKAGE_BINUTILS that builds all Gustavo> of binutils and only installs libbfd + BR2_PACKAGE_BINUTILS_TARGET to Gustavo> install the full version.
Yes, that's what I meant about the _FULLINSTALL option.
Quoted 1 line
Quoted 1 line
You have trailing spaces here and elsewhere.
Gustavo> Hopefully fixed.
Thanks.
Gustavo> $(GCC_BUILD_DIR1)/.compiled: $(GCC_BUILD_DIR1)/.configured
Gustavo> - # gcc >= 4.3.0 have to also build all-target-libgcc
Quoted 2 lines
Quoted 2 lines
Why are you removing those comments? We still support gcc 4.2.x
Gustavo> Because these are in STAGE1 (DIR1) where it's completely irrelevant / Gustavo> doesn't apply and just amounts to misinformation. Gustavo> gcc-initial doesn't use nor install headers since the extra gcc build Gustavo> stage was added. Same scenario for libgcc.
Gustavo> They're leftover comments. That's the reason i kept the ones in Gustavo> gcc-intermediate.
Ahh ok, thanks.
Quoted 1 line
Quoted 1 line
Why remove this
ARCH_IS_64stuff?
Gustavo> This is from commit 3c77bab2eeace3ee675bd745ca335fa3dd1630bb Gustavo> which does a symlink trick to make libstdc++ available. It's Gustavo> simpler to just copy libstdc++ (and libgcj/libgcc while at it) Gustavo> to the sysroot which is fixed in patch #5 from my series.
Ok, good.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 4/10 binutils: make it a proper package
In reply to Gustavo ZacariasQuoted 8 lines · On Wed, 29 Dec 2010 17:41:58 -0300 Gustavo Zacarias <[email protected]>…
Quoted 8 lines
Gustavo> $(GCC_BUILD_DIR2)/.configured: $(GCC_DIR)/.patched
Gustavo> mkdir -p $(GCC_BUILD_DIR2)
Gustavo> - -rmdir $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
Gustavo> - mkdir -p $(STAGING_DIR)/lib
Gustavo> - ln -snf ../../lib $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
Gustavo> - $(if $(BR2_ARCH_IS_64),mkdir -p $(STAGING_DIR)/lib64)
Gustavo> - $(if $(BR2_ARCH_IS_64),ln -snf ../../lib64 $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib64)
Quoted 6 lines
Quoted 1 line
Why remove this
ARCH_IS_64stuff?This is from commit
3c77bab2eeace3ee675bd745ca335fa3dd1630bbwhich does a symlink trick to make libstdc++ available. It's simpler to just copy libstdc++ (and libgcj/libgcc while at it) to the sysroot which is fixed in patch #5 from my series.
I am not sure about this justification, since I don't see what change in the toolchain build procedure removes the need for this symbolic link. Have you actually tested building WebKit on x86_64 for example ?
Thanks,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 4/10 binutils: make it a proper package
Quoted 7 lines · Thomas Petazzoni
Quoted 6 lines
Quoted 1 line
Why remove this
ARCH_IS_64stuff?This is from commit
3c77bab2eeace3ee675bd745ca335fa3dd1630bbwhich does a symlink trick to make libstdc++ available. It's simpler to just copy libstdc++ (and libgcj/libgcc while at it) to the sysroot which is fixed in patch #5 from my series.
Quoted 7 lines
I am not sure about this justification, since I don't see what change in the toolchain build procedure removes the need for this symbolic link. Have you actually tested building WebKit on
x86_64for example ?Thanks,
Thomas
Yes, tested on an x86_64 host building an x86_64 target (full midori). First test was removing all the symlink stuff which in fact broke webkit, then i added my lib* in staging patch. Everything was built from scratch.
To throw in some extra testing i did the same with an arm target for both runs with the same result.
PATCH 5/10 gcc: install copies of libgcc, libstdc++ and libgcj to the sysroot too
In reply to Gustavo ZacariasWe want to keep a copy around for the future SDK functionality.
--- toolchain/gcc/gcc-uclibc-4.x.mk | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
toolchain/gcc/gcc-uclibc-4.x.mk +8 -0
@@ -421,6 +421,8 @@ ifeq ($(BR2_GCC_SHARED_LIBGCC),y) # These go in /lib, so... rm -rf $(TARGET_DIR)/usr/lib/libgcc_s*.so* -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgcc_s* \ + $(STAGING_DIR)/lib/ + -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgcc_s* \ $(TARGET_DIR)/lib/ -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/lib/libgcc_s* endif
@@ -428,14 +430,20 @@ ifeq ($(BR2_INSTALL_LIBSTDCPP),y) ifeq ($(BR2_GCC_SHARED_LIBGCC),y) mkdir -p $(TARGET_DIR)/usr/lib -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libstdc++.so* \ + $(STAGING_DIR)/usr/lib/ + -cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libstdc++.so* \ $(TARGET_DIR)/usr/lib/ -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/usr/lib/libstdc++.so* endif endif ifeq ($(BR2_INSTALL_LIBGCJ),y) + cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgcj.so* $(STAGING_DIR)/usr/lib/ cp -dpf $(HOST_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib*/libgcj.so* $(TARGET_DIR)/usr/lib/ + mkdir -p $(STAGING_DIR)/usr/lib/security mkdir -p $(TARGET_DIR)/usr/lib/security cp -dpf $(HOST_DIR)/usr/lib/security/classpath.security \ + $(STAGING_DIR)/usr/lib/security/ + cp -dpf $(HOST_DIR)/usr/lib/security/classpath.security \ $(TARGET_DIR)/usr/lib/security/ -$(STRIPCMD) $(STRIP_STRIP_UNNEEDED) $(TARGET_DIR)/usr/lib/libgcj.so* endif
Signature · 1 line
1.7.2.2
PATCH 6/10 gdb: make it a proper package
In reply to Gustavo Zacarias* Convert gdb to a proper autotargets package
* Add version 7.2
* Drop version 6.6
* Mark version 6.7.1 (non-avr32) as deprecated
Kconfig can't handle duplicate choices and we can't make source depend on anything.
To fix this we suffix the different version choices for each case (in the toolchain menu with internal toolchain, in the package menu for target gdb/gdbserver for internal and external toolchains.
TODO: copy gdbserver from external toolchains
---
Makefile | 2 +-
package/Config.in | 6 +
package/gdb/Config.in.external | 66 ++++++
package/gdb/Config.in.host | 49 ++++
package/gdb/Config.in.internal | 70 ++++++
.../gdb-6.7.1}/600-fix-compile-flag-mismatch.patch | 0
.../gdb-6.8}/600-fix-compile-flag-mismatch.patch | 0
package/gdb/gdb-7.2/100-fix-ipa.patch | 25 ++
.../gdb/gdb-7.2/101-fix-gdbserver-uninstall.patch | 23 ++
package/gdb/gdb.mk | 62 +++++
toolchain/gdb/6.6/100-uclibc-conf.patch | 82 -------
.../gdb/6.6/600-fix-compile-flag-mismatch.patch | 69 ------
toolchain/gdb/Config.in | 69 ------
toolchain/gdb/gdb.mk | 237 --------------------
toolchain/toolchain-buildroot.mk | 1 -
toolchain/toolchain-buildroot/Config.in | 1 +
toolchain/toolchain-common.in | 5 -
toolchain/toolchain-crosstool-ng.mk | 1 -
toolchain/toolchain-external.mk | 1 -
19 files changed, 303 insertions(+), 466 deletions(-)
create mode 100644 package/gdb/Config.in.external
create mode 100644 package/gdb/Config.in.host
create mode 100644 package/gdb/Config.in.internal
rename {toolchain/gdb/6.7.1 => package/gdb/gdb-6.7.1}/600-fix-compile-flag-mismatch.patch (100%)
rename {toolchain/gdb/6.8 => package/gdb/gdb-6.8}/600-fix-compile-flag-mismatch.patch (100%)
create mode 100644 package/gdb/gdb-7.2/100-fix-ipa.patch
create mode 100644 package/gdb/gdb-7.2/101-fix-gdbserver-uninstall.patch
create mode 100644 package/gdb/gdb.mk
delete mode 100644 toolchain/gdb/6.6/100-uclibc-conf.patch
delete mode 100644 toolchain/gdb/6.6/600-fix-compile-flag-mismatch.patch
delete mode 100644 toolchain/gdb/Config.in
delete mode 100644 toolchain/gdb/gdb.mkMakefile +1 -1
@@ -612,7 +612,7 @@ endif configured: dirs kernel-headers uclibc-config busybox-config linux26-config -prepatch: gcc-patched gdb-patched uclibc-patched +prepatch: gcc-patched uclibc-patched cross: $(BASE_TARGETS)
package/Config.in +6 -0
@@ -55,6 +55,12 @@ source "package/flex/Config.in" if BR2_PACKAGE_BUSYBOX_SHOW_OTHERS source "package/gawk/Config.in" endif +if BR2_TOOLCHAIN_BUILDROOT +source "package/gdb/Config.in.internal" +endif +if !BR2_TOOLCHAIN_BUILDROOT +source "package/gdb/Config.in.external" +endif source "toolchain/gcc/Config.in.2" source "package/gettext/Config.in" source "package/gmp/Config.in"
package/gdb/Config.in.external new file +66 -0
66 lines not on this page · raw message
package/gdb/Config.in.host new file +49 -0
49 lines not on this page · raw message
package/gdb/Config.in.internal new file +70 -0
70 lines not on this page · raw message
package/gdb/gdb-6.7.1/600-fix-compile-flag-mismatch.patch renamed from toolchain/gdb/6.7.1/600-fix-compile-flag-mismatch.patch +0 -0
package/gdb/gdb-6.8/600-fix-compile-flag-mismatch.patch renamed from toolchain/gdb/6.8/600-fix-compile-flag-mismatch.patch +0 -0
package/gdb/gdb-7.2/100-fix-ipa.patch new file +25 -0
@@ -0,0 +1,25 @@ +Fix gdbserver standalone + +See http://www.cygwin.com/ml/gdb-patches/2010-09/msg00148.html + +Signed-off-by: Gustavo Zacarias <[email protected]> +--- + gdb/gdbserver/Makefile.in | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in +index 76577cf..c2fc245 100644 +--- a/gdb/gdbserver/Makefile.in ++++ b/gdb/gdbserver/Makefile.in +@@ -164,7 +164,7 @@ install: all install-only + install-only: + n=`echo gdbserver | sed '$(program_transform_name)'`; \ + if [ x$$n = x ]; then n=gdbserver; else true; fi; \ +- if [ x$IPA_DEPFILES != x ]; then \ ++ if [ x$$IPA_DEPFILES != x ]; then \ + $(SHELL) $(srcdir)/../../mkinstalldirs $(DESTDIR)$(libdir); \ + $(INSTALL_PROGRAM) $(IPA_LIB) $(DESTDIR)$(libdir)/$(IPA_LIB); \ + fi; \ +-- +1.7.2.2 +
package/gdb/gdb-7.2/101-fix-gdbserver-uninstall.patch new file +23 -0
@@ -0,0 +1,23 @@ +Fix uninstall target of gdbserver... meaning honor DESTDIR. + +Signed-off-by: Gustavo Zacarias <[email protected]> +--- + gdb/gdbserver/Makefile.in | 2 +- + 1 files changed, 1 insertions(+), 1 deletions(-) + +diff --git a/gdb/gdbserver/Makefile.in b/gdb/gdbserver/Makefile.in +index 76577cf..43024fe 100644 +--- a/gdb/gdbserver/Makefile.in ++++ b/gdb/gdbserver/Makefile.in +@@ -176,7 +176,7 @@ install-only: + uninstall: force + n=`echo gdbserver | sed '$(program_transform_name)'`; \ + if [ x$$n = x ]; then n=gdbserver; else true; fi; \ +- rm -f $(bindir)/$$n$(EXEEXT) $(DESTDIR)$(man1dir)/$$n.1 ++ rm -f $(DESTDIR)$(bindir)/$$n$(EXEEXT) $(DESTDIR)$(man1dir)/$$n.1 + + installcheck: + check: +-- +1.7.2.2 +
package/gdb/gdb.mk new file +62 -0
62 lines not on this page · raw message
toolchain/gdb/6.6/100-uclibc-conf.patch deleted +0 -82
82 lines not on this page · raw message
toolchain/gdb/6.6/600-fix-compile-flag-mismatch.patch deleted +0 -69
69 lines not on this page · raw message
toolchain/gdb/Config.in deleted +0 -69
69 lines not on this page · raw message
toolchain/gdb/gdb.mk deleted +0 -237
237 lines not on this page · raw message
toolchain/toolchain-buildroot.mk +0 -1
@@ -3,7 +3,6 @@ include toolchain/dependencies/dependencies.mk include toolchain/elf2flt/elf2flt.mk include toolchain/gcc/gcc-uclibc-4.x.mk -include toolchain/gdb/gdb.mk include toolchain/kernel-headers/kernel-headers.mk include toolchain/mklibs/mklibs.mk include toolchain/uClibc/uclibc.mk
toolchain/toolchain-buildroot/Config.in +1 -0
@@ -5,4 +5,5 @@ source "toolchain/kernel-headers/Config.in" source "toolchain/uClibc/Config.in" source "package/binutils/Config.in.host" source "toolchain/gcc/Config.in" +source "package/gdb/Config.in.host" endif
toolchain/toolchain-common.in +0 -5
@@ -1,10 +1,5 @@ # Generic toolchain options -# we want gdb config in the middle of both source and external -# toolchains, but mconf won't let us source the same file twice, -# so put it here instead -source "toolchain/gdb/Config.in" - config BR2_LARGEFILE bool
toolchain/toolchain-crosstool-ng.mk +0 -1
@@ -5,7 +5,6 @@ include toolchain/helpers.mk include toolchain/dependencies/dependencies.mk include toolchain/elf2flt/elf2flt.mk include toolchain/gcc/gcc-uclibc-4.x.mk -include toolchain/gdb/gdb.mk include toolchain/toolchain-crosstool-ng/crosstool-ng.mk include toolchain/mklibs/mklibs.mk include toolchain/uClibc/uclibc.mk
toolchain/toolchain-external.mk +0 -1
@@ -4,7 +4,6 @@ include toolchain/helpers.mk include toolchain/dependencies/dependencies.mk include toolchain/elf2flt/elf2flt.mk include toolchain/gcc/gcc-uclibc-4.x.mk -include toolchain/gdb/gdb.mk include toolchain/kernel-headers/kernel-headers.mk include toolchain/mklibs/mklibs.mk include toolchain/toolchain-external/ext-tool.mk
Signature · 1 line
1.7.2.2
PATCH 7/10 package: drop sparc64 bits
In reply to Gustavo ZacariasRemove VIS optimization, it's for sparc64 and it's gone.
--- package/Makefile.in | 5 ----- 1 files changed, 0 insertions(+), 5 deletions(-)
package/Makefile.in +0 -5
@@ -92,11 +92,6 @@ ifeq ($(BR2_VFP_FLOAT),y) TARGET_CFLAGS+=-mfpu=vfp endif -# enable VIS for v9a and v9b -ifeq ($(findstring y,$(BR2_sparc_v9a)$(BR2_sparc64_v9a)$(BR2_sparc_v9b)$(BR2_sparc64_v9b)),y) -TARGET_CFLAGS+=-mvis -endif - ifeq ($(findstring yy,$(BR2_mips)$(BR2_MIPS_ABI64)),yy) TARGET_CFLAGS+=-fno-pic -mno-abicalls endif
Signature · 1 line
1.7.2.2
PATCH 7/10 package: drop sparc64 bits
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Gustavo> Remove VIS optimization, it's for sparc64 and it's gone. Gustavo> Signed-off-by: Gustavo Zacarias <[email protected]>
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
PATCH 8/10 oprofile: use new libbfd option
In reply to Gustavo ZacariasConvert the oprofile target to select the new libbfd staging/target option to avoid a huge target binutils for a simple task.
--- package/oprofile/Config.in | 1 + package/oprofile/oprofile.mk | 5 +---- 2 files changed, 2 insertions(+), 4 deletions(-)
package/oprofile/Config.in +1 -0
@@ -5,6 +5,7 @@ config BR2_PACKAGE_OPROFILE # choosen in the config. This will have to be fixed later. depends on !BR2_TOOLCHAIN_EXTERNAL select BR2_PACKAGE_POPT + select BR2_PACKAGE_BINUTILS_LIBBFD depends on BR2_INSTALL_LIBSTDCPP help OProfile is a system-wide profiler for Linux systems,
package/oprofile/oprofile.mk +1 -4
@@ -5,9 +5,6 @@ ############################################################# OPROFILE_VERSION := 0.9.4 OPROFILE_CONF_OPT := --localstatedir=/var \ - --with-extra-includes="$(BUILD_DIR)/binutils-$(BR2_BINUTILS_VERSION)-target/bfd \ - -I$(TOOLCHAIN_DIR)/binutils-$(BR2_BINUTILS_VERSION)/include" \ - --with-extra-libs=$(BUILD_DIR)/binutils-$(BR2_BINUTILS_VERSION)-target/bfd \ --with-kernel-support OPROFILE_BINARIES := utils/ophelp
@@ -24,7 +21,7 @@ ifeq ($(OPROFILE_ARCH),) OPROFILE_ARCH := $(BR2_ARCH) endif -OPROFILE_DEPENDENCIES := popt binutils_target +OPROFILE_DEPENDENCIES := popt binutils define OPROFILE_INSTALL_TARGET_CMDS $(INSTALL) -d -m 755 $(TARGET_DIR)/usr/bin
Signature · 1 line
1.7.2.2
PATCH 9/10 binutils: needs libintl when locales are enabled
In reply to Gustavo Zacarias--- package/binutils/Config.in | 2 ++ package/binutils/binutils.mk | 1 + 2 files changed, 3 insertions(+), 0 deletions(-)
package/binutils/Config.in +2 -0
@@ -2,6 +2,8 @@ config BR2_PACKAGE_BINUTILS bool depends on BR2_TOOLCHAIN_BUILDROOT default y if BR2_PACKAGE_BINUTILS_TARGET || BR2_PACKAGE_BINUTILS_LIBBFD + select BR2_PACKAGE_GETTEXT if BR2_NEEDS_GETTEXT_IF_LOCALE + select BR2_PACKAGE_LIBINTL if BR2_NEEDS_GETTEXT_IF_LOCALE config BR2_PACKAGE_BINUTILS_TARGET bool "binutils"
package/binutils/binutils.mk +1 -0
@@ -12,6 +12,7 @@ BINUTILS_SITE = ftp://www.at91.com/pub/buildroot endif BINUTILS_EXTRA_CONFIG_OPTIONS = $(call qstrip,$(BR2_BINUTILS_EXTRA_CONFIG_OPTIONS)) BINUTILS_INSTALL_STAGING = YES +BINUTILS_DEPENDENCIES = $(if $(BR2_NEEDS_GETTEXT_IF_LOCALE),gettext libintl) # These aren't really needed, we just pull them until gcc is a proper package ifeq ($(BR2_PACKAGE_BINUTILS_TARGET),y)
Signature · 1 line
1.7.2.2
PATCH 10/10 toolchain: drop BR2_CROSS_TOOLCHAIN_TARGET_UTILS option
In reply to Gustavo ZacariasIt's really not very useful, all it does is install a target strace and ldd in a target_utils directory in staging. While at it clean up the strace makefile a bit.
--- configs/arm_nptl_toolchain_defconfig | 1 - configs/arm_toolchain_defconfig | 1 - package/strace/strace.mk | 22 +++++----------------- target/xtensa/defconfig | 1 - toolchain/toolchain-buildroot/Config.in.2 | 12 ------------ toolchain/uClibc/uclibc.mk | 5 ----- 6 files changed, 5 insertions(+), 37 deletions(-)
configs/arm_nptl_toolchain_defconfig +0 -1
@@ -10,7 +10,6 @@ BR2_ENABLE_LOCALE=y BR2_USE_WCHAR=y BR2_PTHREADS_NATIVE=y BR2_INSTALL_LIBSTDCPP=y -BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y # No package # BR2_PACKAGE_BUSYBOX is not set
configs/arm_toolchain_defconfig +0 -1
@@ -8,7 +8,6 @@ BR2_INET_RPC=y BR2_ENABLE_LOCALE=y BR2_USE_WCHAR=y BR2_INSTALL_LIBSTDCPP=y -BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y # No package # BR2_PACKAGE_BUSYBOX is not set
package/strace/strace.mk +5 -17
@@ -3,14 +3,12 @@ # strace # ############################################################# -STRACE_VERSION:=4.5.20 -STRACE_SOURCE:=strace-$(STRACE_VERSION).tar.bz2 -STRACE_SITE:=http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/strace -STRACE_AUTORECONF:=NO -STRACE_INSTALL_STAGING:=NO -STRACE_INSTALL_TARGET:=YES -STRACE_CONF_ENV:= ac_cv_header_linux_if_packet_h=yes \ +STRACE_VERSION = 4.5.20 +STRACE_SOURCE = strace-$(STRACE_VERSION).tar.bz2 +STRACE_SITE = http://$(BR2_SOURCEFORGE_MIRROR).dl.sourceforge.net/sourceforge/strace + +STRACE_CONF_ENV = ac_cv_header_linux_if_packet_h=yes \ ac_cv_header_linux_netlink_h=yes \ $(if $(BR2_LARGEFILE),ac_cv_type_stat64=yes,ac_cv_type_stat64=no)
@@ -20,14 +18,4 @@ endef STRACE_POST_INSTALL_TARGET_HOOKS += STRACE_REMOVE_STRACE_GRAPH -define STRACE_INSTALL_TOOLCHAIN_TARGET_UTILS - mkdir -p $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/target_utils - install -c $(TARGET_DIR)/usr/bin/strace \ - $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/target_utils/strace -endef - -ifeq ($(BR2_CROSS_TOOLCHAIN_TARGET_UTILS),y) -STRACE_POST_INSTALL_TARGET_HOOKS += STRACE_INSTALL_TOOLCHAIN_TARGET_UTILS -endif - $(eval $(call AUTOTARGETS,package,strace))
target/xtensa/defconfig +0 -1
@@ -80,7 +80,6 @@ BR2_GDB_VERSION="6.8" BR2_LARGEFILE=y BR2_INET_RPC=y BR2_TARGET_OPTIMIZATION="-Os -pipe" -BR2_CROSS_TOOLCHAIN_TARGET_UTILS=y ## Added by Maxim
toolchain/toolchain-buildroot/Config.in.2 +0 -12
@@ -118,16 +118,4 @@ config BR2_VFP_FLOAT Most people will answer N. -config BR2_CROSS_TOOLCHAIN_TARGET_UTILS - bool "Include target utils in cross toolchain" - default y - help - When using buildroot to build a deployable cross toolchain, - it is handy to include certain target apps with that toolchain - as a convenience. - Examples include ldd, gdbserver, and strace. - - Answer Y if you want these apps (if built) copied into the - cross toolchain dir under <arch>-linux-uclibc/target_utils/. - endif
toolchain/uClibc/uclibc.mk +0 -5
@@ -479,11 +479,6 @@ $(TARGET_DIR)/usr/bin/ldd: $(cross_compiler) CPP=$(TARGET_CROSS)cpp LD=$(TARGET_CROSS)ld \ ARCH="$(UCLIBC_TARGET_ARCH)" \ PREFIX=$(TARGET_DIR) utils install_utils -ifeq ($(BR2_CROSS_TOOLCHAIN_TARGET_UTILS),y) - mkdir -p $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/target_utils - install -c $(TARGET_DIR)/usr/bin/ldd \ - $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/target_utils/ldd -endif touch -c $@ ifneq ($(BR2_PREFER_STATIC_LIB),y)
Signature · 1 line
1.7.2.2
PATCH 10/10 toolchain: drop BR2_CROSS_TOOLCHAIN_TARGET_UTILS option
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Gustavo> It's really not very useful, all it does is install a target Gustavo> strace and ldd in a target_utils directory in staging. Gustavo> While at it clean up the strace makefile a bit.
Committed, thanks.
Signature · 1 line
Bye, Peter Korsgaard
cover Toolchain rework, take 3
In reply to Gustavo ZacariasQuoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Gustavo> This is the third batch of patches for the internal toolchain rework. Gustavo> Peter merged some of the work so this is a rebase with a few Gustavo> fixes and additions related to oprofile and removing Gustavo> the BR2_CROSS_TOOLCHAIN_TARGET_UTILS option.
Thanks. Committed first 3 (up to binutils). Care to respin the rest of the series? Maybe patch 9 should get merged with the main binutils patch as well.
Signature · 1 line
Bye, Peter Korsgaard
cover Toolchain rework, take 3
Quoted 3 lines · Peter Korsgaard
Thanks. Committed first 3 (up to binutils). Care to respin the rest of the series? Maybe patch 9 should get merged with the main binutils patch as well.
Respined.
They're at the usual git://repo.or.cz/buildroot-gz.git toolchain-rework branch.
Give them a spin to see if there's anything big i missed before sending a ton of email again ;-)
cover Toolchain rework, take 3
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
Quoted 1 line
"Gustavo" == Gustavo Zacarias <[email protected]> writes:
Quoted 3 lines · Peter Korsgaard
Quoted 3 lines
Thanks. Committed first 3 (up to binutils). Care to respin the rest of the series? Maybe patch 9 should get merged with the main binutils patch as well.
Gustavo> Respined.
Gustavo> They're at the usual git://repo.or.cz/buildroot-gz.git toolchain-rework Gustavo> branch.
Gustavo> Give them a spin to see if there's anything big i missed before sending Gustavo> a ton of email again ;-)
Thanks, but we're down to 6 patches now so it's no loner a ton ;)
I see that you are still hiding the BR2_PACKAGE_BINUTILS option, why is that?
Signature · 1 line
Bye, Peter Korsgaard
cover Toolchain rework, take 3
Quoted 3 lines · Peter Korsgaard
Thanks, but we're down to 6 patches now so it's no loner a ton ;)
I see that you are still hiding the
BR2_PACKAGE_BINUTILSoption, why is that?
Force and habit.
Users shouldn't need to select it by hand since it's just libbfd, on the other hand hiding it isn't so nice.
I'll unhide it.