Skip to contentSkip to conversation

refactor dts files for mpc5200b based systems (take 2)

PATCH Applied John Bonesio 2 participants 11 messages Nov 17, 2010 – Jan 4, 2011

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover refactor dts files for mpc5200b based systems (take 2)

I belive I've fixed the problems with the messed up [PATCH 1/5]. I've also incorporated changes per comments.

The following series implements a set of changes to refactor dts (device tree source) files for systems using the mpc5200b SoC.

The dtc changes allow a base dts to be defined in a common dts file included with '/include/ <filename>'. This base dts can then be updated and modified by merging in a second device tree defined in the system specific dts file.

The rest of the changes are the refactoring of the mpc5200b dts files.

---

John Bonesio (5):
Pull in recent changes from the main dtc repository. These changes primarily powerpc/5200: dts: rename nodes to prepare for refactoring dts files powerpc/5200: dts: remove unused properties
powerpc/5200: dts: Change combatible strings on localbus powerpc/5200: dts: refactor dts files

 arch/powerpc/boot/dts/cm5200.dts    |  198 +++----------------------
 arch/powerpc/boot/dts/digsy_mtc.dts |  179 +++--------------------
 arch/powerpc/boot/dts/lite5200b.dts |  232 ++---------------------------
 arch/powerpc/boot/dts/media5200.dts |  216 +++------------------------
 arch/powerpc/boot/dts/motionpro.dts |  198 +++----------------------
 arch/powerpc/boot/dts/mpc5200b.dtsi |  276 +++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/dts/mucmc52.dts   |  176 ++++++----------------
 arch/powerpc/boot/dts/pcm030.dts    |  201 ++-----------------------
 arch/powerpc/boot/dts/pcm032.dts    |  205 ++------------------------
 arch/powerpc/boot/dts/uc101.dts     |  162 ++++-----------------
 10 files changed, 499 insertions(+), 1544 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mpc5200b.dtsi
Signature · 1 line
Signature
#1 lore raw

PATCH 1/5 Pull in recent changes from the main dtc repository. These changes primarily

allow multiple device trees to be declared which are merged by dtc. This feature allows us to include a basic dts file and then provide more information for the specific system through the merging functionality.

---

 0 files changed, 0 insertions(+), 0 deletions(-)
scripts/dtc/Makefile +2 -1
index 01cdb36..04a31c1 100644
@@ -4,7 +4,7 @@ hostprogs-y	:= dtc
 always		:= $(hostprogs-y)
 
 dtc-objs	:= dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
-		   srcpos.o checks.o
+		   srcpos.o checks.o util.o
 dtc-objs	+= dtc-lexer.lex.o dtc-parser.tab.o
 
 # Source files need to get at the userspace version of libfdt_env.h to compile
@@ -19,6 +19,7 @@ HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_util.o := $(HOSTCFLAGS_DTC)
 
 HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
scripts/dtc/checks.c +94 -11

139 lines not on this page · raw message

scripts/dtc/dtc-lexer.l +23 -152

283 lines not on this page · raw message

scripts/dtc/dtc-lexer.lex.c_shipped +176 -375

828 lines not on this page · raw message

scripts/dtc/dtc-parser.tab.c_shipped +440 -450

1,601 lines not on this page · raw message

scripts/dtc/dtc-parser.tab.h_shipped +30 -52

127 lines not on this page · raw message

scripts/dtc/dtc-parser.y +63 -97

7 lines not on this page · raw message

scripts/dtc/dtc.c +31 -26

57 lines not on this page · raw message

scripts/dtc/dtc.h +38 -39

77 lines not on this page · raw message

scripts/dtc/flattree.c +109 -83

192 lines not on this page · raw message

scripts/dtc/fstree.c +5 -7
index 8fe1bdf..f377453 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/livetree.c +323 -22

345 lines not on this page · raw message

scripts/dtc/srcpos.c +195 -63

258 lines not on this page · raw message

scripts/dtc/srcpos.h +50 -49

99 lines not on this page · raw message

scripts/dtc/treesource.c +26 -22

48 lines not on this page · raw message

scripts/dtc/util.h new file +56 -0

56 lines not on this page · raw message

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

Applied
#2 lore raw

Re: [PATCH 1/5] Pull in recent changes from the main dtc repository. These changes primarily

Quoted 5 lines · John Bonesio

allow multiple device trees to be declared which are merged by dtc. This feature allows us to include a basic dts file and then provide more information for the specific system through the merging functionality.

Applied, thanks. Was missing the addition of util.c, but I've fixed it up. Here's the corrected diffstat:

 scripts/dtc/Makefile                 |    3 +-
 scripts/dtc/checks.c                 |  105 ++++-
 scripts/dtc/dtc-lexer.l              |  175 +------
 scripts/dtc/dtc-lexer.lex.c_shipped  |  551 +++++++--------------
 scripts/dtc/dtc-parser.tab.c_shipped |  892 +++++++++++++++++-----------------
 scripts/dtc/dtc-parser.tab.h_shipped |   82 ++--
 scripts/dtc/dtc-parser.y             |  160 +++----
 scripts/dtc/dtc.c                    |   57 ++-
 scripts/dtc/dtc.h                    |   77 ++--
 scripts/dtc/flattree.c               |  192 +++++----
 scripts/dtc/fstree.c                 |   12 +-
 scripts/dtc/livetree.c               |  345 ++++++++++++-
 scripts/dtc/srcpos.c                 |  258 ++++++++---
 scripts/dtc/srcpos.h                 |   99 ++--
 scripts/dtc/treesource.c             |   48 +-
 scripts/dtc/util.c                   |   59 +++
 scripts/dtc/util.h                   |   56 +++
 scripts/dtc/version_gen.h            |    2 +-
 18 files changed, 1721 insertions(+), 1452 deletions(-)
Quoted 5,144 lines

---

 0 files changed, 0 insertions(+), 0 deletions(-)
scripts/dtc/Makefile +2 -1
index 01cdb36..04a31c1 100644
@@ -4,7 +4,7 @@ hostprogs-y	:= dtc
 always		:= $(hostprogs-y)
 
 dtc-objs	:= dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
-		   srcpos.o checks.o
+		   srcpos.o checks.o util.o
 dtc-objs	+= dtc-lexer.lex.o dtc-parser.tab.o
 
 # Source files need to get at the userspace version of libfdt_env.h to compile
@@ -19,6 +19,7 @@ HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_util.o := $(HOSTCFLAGS_DTC)
 
 HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
 HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
scripts/dtc/checks.c +94 -11
index 9548579..a662a00 100644
@@ -278,32 +278,112 @@ static void check_property_name_chars(struct check *c, struct node *dt,
 }
 PROP_CHECK(property_name_chars, PROPNODECHARS, ERROR);
 
+#define DESCLABEL_FMT	"%s%s%s%s%s"
+#define DESCLABEL_ARGS(node,prop,mark)		\
+	((mark) ? "value of " : ""),		\
+	((prop) ? "'" : ""), \
+	((prop) ? (prop)->name : ""), \
+	((prop) ? "' in " : ""), (node)->fullpath
+
+static void check_duplicate_label(struct check *c, struct node *dt,
+				  const char *label, struct node *node,
+				  struct property *prop, struct marker *mark)
+{
+	struct node *othernode = NULL;
+	struct property *otherprop = NULL;
+	struct marker *othermark = NULL;
+
+	othernode = get_node_by_label(dt, label);
+
+	if (!othernode)
+		otherprop = get_property_by_label(dt, label, &othernode);
+	if (!othernode)
+		othermark = get_marker_label(dt, label, &othernode,
+					       &otherprop);
+
+	if (!othernode)
+		return;
+
+	if ((othernode != node) || (otherprop != prop) || (othermark != mark))
+		FAIL(c, "Duplicate label '%s' on " DESCLABEL_FMT
+		     " and " DESCLABEL_FMT,
+		     label, DESCLABEL_ARGS(node, prop, mark),
+		     DESCLABEL_ARGS(othernode, otherprop, othermark));
+}
+
+static void check_duplicate_label_node(struct check *c, struct node *dt,
+				       struct node *node)
+{
+	struct label *l;
+
+	for_each_label(node->labels, l)
+		check_duplicate_label(c, dt, l->label, node, NULL, NULL);
+}
+static void check_duplicate_label_prop(struct check *c, struct node *dt,
+				       struct node *node, struct property *prop)
+{
+	struct marker *m = prop->val.markers;
+	struct label *l;
+
+	for_each_label(prop->labels, l)
+		check_duplicate_label(c, dt, l->label, node, prop, NULL);
+
+	for_each_marker_of_type(m, LABEL)
+		check_duplicate_label(c, dt, m->ref, node, prop, m);
+}
+CHECK(duplicate_label, NULL, check_duplicate_label_node,
+      check_duplicate_label_prop, NULL, ERROR);
+
 static void check_explicit_phandles(struct check *c, struct node *root,
-					  struct node *node)
+				    struct node *node, struct property *prop)
 {
-	struct property *prop;
+	struct marker *m;
 	struct node *other;
 	cell_t phandle;
 
-	prop = get_property(node, "linux,phandle");
-	if (! prop)
-		return; /* No phandle, that's fine */
+	if (!streq(prop->name, "phandle")
+	    && !streq(prop->name, "linux,phandle"))
+		return;
 
 	if (prop->val.len != sizeof(cell_t)) {
-		FAIL(c, "%s has bad length (%d) linux,phandle property",
-		     node->fullpath, prop->val.len);
+		FAIL(c, "%s has bad length (%d) %s property",
+		     node->fullpath, prop->val.len, prop->name);
+		return;
+	}
+
+	m = prop->val.markers;
+	for_each_marker_of_type(m, REF_PHANDLE) {
+		assert(m->offset == 0);
+		if (node != get_node_by_ref(root, m->ref))
+			/* "Set this node's phandle equal to some
+			 * other node's phandle".  That's nonsensical
+			 * by construction. */ {
+			FAIL(c, "%s in %s is a reference to another node",
+			     prop->name, node->fullpath);
+			return;
+		}
+		/* But setting this node's phandle equal to its own
+		 * phandle is allowed - that means allocate a unique
+		 * phandle for this node, even if it's not otherwise
+		 * referenced.  The value will be filled in later, so
+		 * no further checking for now. */
 		return;
 	}
 
 	phandle = propval_cell(prop);
+
 	if ((phandle == 0) || (phandle == -1)) {
-		FAIL(c, "%s has invalid linux,phandle value 0x%x",
-		     node->fullpath, phandle);
+		FAIL(c, "%s has bad value (0x%x) in %s property",
+		     node->fullpath, phandle, prop->name);
 		return;
 	}
 
+	if (node->phandle && (node->phandle != phandle))
+		FAIL(c, "%s has %s property which replaces existing phandle information",
+		     node->fullpath, prop->name);
+
 	other = get_node_by_phandle(root, phandle);
-	if (other) {
+	if (other && (other != node)) {
 		FAIL(c, "%s has duplicated phandle 0x%x (seen before at %s)",
 		     node->fullpath, phandle, other->fullpath);
 		return;
@@ -311,7 +391,7 @@ static void check_explicit_phandles(struct check *c, struct node *root,
 
 	node->phandle = phandle;
 }
-NODE_CHECK(explicit_phandles, NULL, ERROR);
+PROP_CHECK(explicit_phandles, NULL, ERROR);
 
 static void check_name_properties(struct check *c, struct node *root,
 				  struct node *node)
@@ -549,6 +629,9 @@ static struct check *check_table[] = {
 	&duplicate_node_names, &duplicate_property_names,
 	&node_name_chars, &node_name_format, &property_name_chars,
 	&name_is_string, &name_properties,
+
+	&duplicate_label,
+
 	&explicit_phandles,
 	&phandle_references, &path_references,
 
scripts/dtc/dtc-lexer.l +23 -152
index a627bbe..e866ea5 100644
@@ -18,7 +18,7 @@
  *                                                                   USA
  */
 
-%option noyywrap noinput nounput yylineno
+%option noyywrap nounput noinput never-interactive
 
 %x INCLUDE
 %x BYTESTRING
@@ -38,6 +38,13 @@ LINECOMMENT	"//".*\n
 #include "srcpos.h"
 #include "dtc-parser.tab.h"
 
+YYLTYPE yylloc;
+
+/* CAUTION: this will stop working if we ever use yyless() or yyunput() */
+#define	YY_USER_ACTION \
+	{ \
+		srcpos_update(&yylloc, yytext, yyleng); \
+	}
 
 /*#define LEXDEBUG	1*/
 
@@ -47,15 +54,10 @@ LINECOMMENT	"//".*\n
 #define DPRINT(fmt, ...)	do { } while (0)
 #endif
 
-static int dts_version; /* = 0 */
+static int dts_version = 1;
 
-#define BEGIN_DEFAULT()	if (dts_version == 0) { \
-				DPRINT("<INITIAL>\n"); \
-				BEGIN(INITIAL); \
-			} else { \
-				DPRINT("<V1>\n"); \
+#define BEGIN_DEFAULT()		DPRINT("<V1>\n"); \
 				BEGIN(V1); \
-			}
 
 static void push_input_file(const char *filename);
 static int pop_input_file(void);
@@ -75,18 +77,13 @@ static int pop_input_file(void);
 		}
 
 <*>{STRING}	{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("String: %s\n", yytext);
 			yylval.data = data_copy_escape_string(yytext+1,
 					yyleng-2);
-			yylloc.first_line = yylineno;
 			return DT_STRING;
 		}
 
 <*>"/dts-v1/"	{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /dts-v1/\n");
 			dts_version = 1;
 			BEGIN_DEFAULT();
@@ -94,106 +91,57 @@ static int pop_input_file(void);
 		}
 
 <*>"/memreserve/"	{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /memreserve/\n");
 			BEGIN_DEFAULT();
 			return DT_MEMRESERVE;
 		}
 
 <*>{LABEL}:	{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Label: %s\n", yytext);
-			yylval.labelref = strdup(yytext);
+			yylval.labelref = xstrdup(yytext);
 			yylval.labelref[yyleng-1] = '\0';
 			return DT_LABEL;
 		}
 
-<INITIAL>[bodh]# {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			if (*yytext == 'b')
-				yylval.cbase = 2;
-			else if (*yytext == 'o')
-				yylval.cbase = 8;
-			else if (*yytext == 'd')
-				yylval.cbase = 10;
-			else
-				yylval.cbase = 16;
-			DPRINT("Base: %d\n", yylval.cbase);
-			return DT_BASE;
-		}
-
-<INITIAL>[0-9a-fA-F]+	{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			yylval.literal = strdup(yytext);
-			DPRINT("Literal: '%s'\n", yylval.literal);
-			return DT_LEGACYLITERAL;
-		}
-
 <V1>[0-9]+|0[xX][0-9a-fA-F]+      {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			yylval.literal = strdup(yytext);
+			yylval.literal = xstrdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
 			return DT_LITERAL;
 		}
 
-\&{LABEL}	{	/* label reference */
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
+<*>\&{LABEL}	{	/* label reference */
 			DPRINT("Ref: %s\n", yytext+1);
-			yylval.labelref = strdup(yytext+1);
+			yylval.labelref = xstrdup(yytext+1);
 			return DT_REF;
 		}
 
-"&{/"{PATHCHAR}+\}	{	/* new-style path reference */
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
+<*>"&{/"{PATHCHAR}+\}	{	/* new-style path reference */
 			yytext[yyleng-1] = '\0';
 			DPRINT("Ref: %s\n", yytext+2);
-			yylval.labelref = strdup(yytext+2);
-			return DT_REF;
-		}
-
-<INITIAL>"&/"{PATHCHAR}+ {	/* old-style path reference */
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			DPRINT("Ref: %s\n", yytext+1);
-			yylval.labelref = strdup(yytext+1);
+			yylval.labelref = xstrdup(yytext+2);
 			return DT_REF;
 		}
 
 <BYTESTRING>[0-9a-fA-F]{2} {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			yylval.byte = strtol(yytext, NULL, 16);
 			DPRINT("Byte: %02x\n", (int)yylval.byte);
 			return DT_BYTE;
 		}
 
 <BYTESTRING>"]"	{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("/BYTESTRING\n");
 			BEGIN_DEFAULT();
 			return ']';
 		}
 
 <PROPNODENAME>{PROPNODECHAR}+ {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("PropNodeName: %s\n", yytext);
-			yylval.propnodename = strdup(yytext);
+			yylval.propnodename = xstrdup(yytext);
 			BEGIN_DEFAULT();
 			return DT_PROPNODENAME;
 		}
 
 "/incbin/"	{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Binary Include\n");
 			return DT_INCBIN;
 		}
@@ -203,8 +151,6 @@ static int pop_input_file(void);
 <*>{LINECOMMENT}+ /* eat C++-style comments */
 
 <*>.		{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Char: %c (\\x%02x)\n", yytext[0],
 				(unsigned)yytext[0]);
 			if (yytext[0] == '[') {
@@ -221,100 +167,25 @@ static int pop_input_file(void);
 
 %%
 
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
-	struct dtc_file *file;
-	YY_BUFFER_STATE yy_prev_buf;
-	int yy_prev_lineno;
-	struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
-
-
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH	(100)
-
-static int incl_depth = 0;
-
-
 static void push_input_file(const char *filename)
 {
-	struct incl_file *incl_file;
-	struct dtc_file *newfile;
-	struct search_path search, *searchptr = NULL;
-
 	assert(filename);
 
-	if (incl_depth++ >= MAX_INCLUDE_DEPTH)
-		die("Includes nested too deeply");
-
-	if (srcpos_file) {
-		search.dir = srcpos_file->dir;
-		search.next = NULL;
-		search.prev = NULL;
-		searchptr = &search;
-	}
-
-	newfile = dtc_open_file(filename, searchptr);
+	srcfile_push(filename);
 
-	incl_file = xmalloc(sizeof(struct incl_file));
+	yyin = current_srcfile->f;
 
-	/*
-	 * Save current context.
-	 */
-	incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
-	incl_file->yy_prev_lineno = yylineno;
-	incl_file->file = srcpos_file;
-	incl_file->prev = incl_file_stack;
-
-	incl_file_stack = incl_file;
-
-	/*
-	 * Establish new context.
-	 */
-	srcpos_file = newfile;
-	yylineno = 1;
-	yyin = newfile->file;
-	yy_switch_to_buffer(yy_create_buffer(yyin, YY_BUF_SIZE));
+	yypush_buffer_state(yy_create_buffer(yyin, YY_BUF_SIZE));
 }
 
 
 static int pop_input_file(void)
 {
-	struct incl_file *incl_file;
-
-	if (incl_file_stack == 0)
+	if (srcfile_pop() == 0)
 		return 0;
 
-	dtc_close_file(srcpos_file);
-
-	/*
-	 * Pop.
-	 */
-	--incl_depth;
-	incl_file = incl_file_stack;
-	incl_file_stack = incl_file->prev;
-
-	/*
-	 * Recover old context.
-	 */
-	yy_delete_buffer(YY_CURRENT_BUFFER);
-	yy_switch_to_buffer(incl_file->yy_prev_buf);
-	yylineno = incl_file->yy_prev_lineno;
-	srcpos_file = incl_file->file;
-	yyin = incl_file->file ? incl_file->file->file : NULL;
-
-	/*
-	 * Free old state.
-	 */
-	free(incl_file);
+	yypop_buffer_state();
+	yyin = current_srcfile->f;
 
 	return 1;
 }
scripts/dtc/dtc-lexer.lex.c_shipped +176 -375
index e27cc63..50c4420 100644
@@ -170,20 +170,7 @@ extern FILE *yyin, *yyout;
 #define EOB_ACT_END_OF_FILE 1
 #define EOB_ACT_LAST_MATCH 2
 
-    /* Note: We specifically omit the test for yy_rule_can_match_eol because it requires
-     *       access to the local variable yy_act. Since yyless() is a macro, it would break
-     *       existing scanners that call yyless() from OUTSIDE yylex. 
-     *       One obvious solution it to make yy_act a global. I tried that, and saw
-     *       a 5% performance hit in a non-yylineno scanner, because yy_act is
-     *       normally declared as a register variable-- so it is not worth it.
-     */
-    #define  YY_LESS_LINENO(n) \
-            do { \
-                int yyl;\
-                for ( yyl = n; yyl < yyleng; ++yyl )\
-                    if ( yytext[yyl] == '\n' )\
-                        --yylineno;\
-            }while(0)
+    #define YY_LESS_LINENO(n)
 
 /* Return all but the first "n" matched characters back to the input stream. */
 #define yyless(n) \
@@ -385,8 +372,8 @@ static void yy_fatal_error (yyconst char msg[]  );
 	*yy_cp = '\0'; \
 	(yy_c_buf_p) = yy_cp;
 
-#define YY_NUM_RULES 20
-#define YY_END_OF_BUFFER 21
+#define YY_NUM_RULES 17
+#define YY_END_OF_BUFFER 18
 /* This struct is not used in this scanner,
    but its presence is necessary. */
 struct yy_trans_info
@@ -394,20 +381,19 @@ struct yy_trans_info
 	flex_int32_t yy_verify;
 	flex_int32_t yy_nxt;
 	};
-static yyconst flex_int16_t yy_accept[104] =
+static yyconst flex_int16_t yy_accept[94] =
     {   0,
         0,    0,    0,    0,    0,    0,    0,    0,    0,    0,
-       21,   19,   16,   16,   19,   19,   19,    7,    7,   19,
-        7,   19,   19,   19,   19,   13,   14,   14,   19,    8,
-        8,   16,    0,    2,    0,    0,    9,    0,    0,    0,
-        0,    0,    0,    7,    7,    5,    0,    6,    0,   12,
-       12,   14,   14,    8,    0,   11,    9,    0,    0,    0,
-        0,   18,    0,    0,    0,    0,    8,    0,   17,    0,
-        0,    0,    0,    0,   10,    0,    0,    0,    0,    0,
-        0,    0,    0,    0,    0,    0,    0,    0,    3,   15,
+       18,   16,   13,   13,   16,   16,   16,   16,   16,   16,
+       16,   10,   11,   11,    6,    6,   13,    0,    2,    0,
+        7,    0,    0,    0,    0,    0,    0,    0,    5,    0,
+        9,    9,   11,   11,    6,    0,    7,    0,    0,    0,
+        0,   15,    0,    0,    0,    0,    6,    0,   14,    0,
+        0,    0,    0,    0,    8,    0,    0,    0,    0,    0,
+        0,    0,    0,    0,    0,    0,    0,    0,    3,   12,
         0,    0,    0,    0,    0,    0,    0,    0,    1,    0,
-
         0,    4,    0
+
     } ;
 
 static yyconst flex_int32_t yy_ec[256] =
@@ -416,16 +402,16 @@ static yyconst flex_int32_t yy_ec[256] =
         2,    2,    2,    1,    1,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
         1,    2,    1,    4,    5,    1,    1,    6,    1,    1,
-        1,    7,    8,    8,    9,    8,   10,   11,   12,   13,
-       13,   13,   13,   13,   13,   13,   13,   14,    1,    1,
-        1,    1,    8,    8,   15,   15,   15,   15,   15,   15,
-       16,   16,   16,   16,   16,   16,   16,   16,   16,   16,
-       16,   16,   16,   16,   16,   16,   16,   17,   16,   16,
-        1,   18,   19,    1,   16,    1,   15,   20,   21,   22,
-
-       23,   15,   16,   24,   25,   16,   16,   26,   27,   28,
-       24,   16,   16,   29,   30,   31,   32,   33,   16,   17,
-       16,   16,   34,    1,   35,    1,    1,    1,    1,    1,
+        1,    7,    5,    5,    8,    5,    9,   10,   11,   12,
+       12,   12,   12,   12,   12,   12,   12,   13,    1,    1,
+        1,    1,    5,    5,   14,   14,   14,   14,   14,   14,
+       15,   15,   15,   15,   15,   15,   15,   15,   15,   15,
+       15,   15,   15,   15,   15,   15,   15,   16,   15,   15,
+        1,   17,   18,    1,   15,    1,   14,   19,   20,   21,
+
+       22,   14,   15,   15,   23,   15,   15,   24,   25,   26,
+       15,   15,   15,   27,   28,   29,   30,   31,   15,   16,
+       15,   15,   32,    1,   33,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
@@ -442,136 +428,114 @@ static yyconst flex_int32_t yy_ec[256] =
         1,    1,    1,    1,    1
     } ;
 
-static yyconst flex_int32_t yy_meta[36] =
+static yyconst flex_int32_t yy_meta[34] =
     {   0,
-        1,    1,    1,    1,    2,    1,    2,    2,    2,    3,
-        4,    4,    4,    5,    6,    7,    7,    1,    1,    6,
-        6,    6,    6,    7,    7,    7,    7,    7,    7,    7,
-        7,    7,    7,    8,    1
+        1,    1,    1,    1,    2,    1,    2,    2,    3,    4,
+        4,    4,    5,    6,    7,    7,    1,    1,    6,    6,
+        6,    6,    7,    7,    7,    7,    7,    7,    7,    7,
+        7,    8,    1
     } ;
 
-static yyconst flex_int16_t yy_base[117] =
+static yyconst flex_int16_t yy_base[106] =
     {   0,
-        0,    0,   30,    0,   44,    0,   67,    0,   97,  105,
-      302,  303,   35,   44,   40,   94,  112,    0,  129,  152,
-      296,  295,  159,    0,  176,  303,    0,  116,   95,  165,
-       49,   46,  102,  303,  296,    0,    0,  288,  290,  293,
-      264,  266,  270,    0,    0,  303,    0,  303,  264,  303,
-        0,    0,  195,  101,    0,    0,    0,    0,  284,  125,
-      277,  265,  225,  230,  216,  218,    0,  202,  224,  221,
-      217,  107,  196,  188,  303,  206,  179,  186,  178,  185,
-      183,  162,  161,  150,  169,  160,  145,  125,  303,  303,
-      137,  109,  190,  103,  203,  167,  108,  197,  303,  123,
-
-       29,  303,  303,  215,  221,  226,  229,  234,  240,  246,
-      250,  257,  265,  270,  275,  282
+        0,    0,  237,  236,   25,    0,   47,    0,   30,   71,
+      244,  247,   82,   84,   84,  211,   95,  229,  218,    0,
+      111,  247,    0,   84,   83,   95,  106,   86,  247,  237,
+        0,  230,  231,  234,  207,  209,  212,  220,  247,  206,
+      247,  218,    0,  106,  116,    0,    0,    0,  223,   89,
+      226,  219,  199,  206,  200,  204,    0,  190,  213,  212,
+      202,   91,  178,  161,  247,  172,  144,  150,  140,  130,
+      140,  124,  128,  120,  138,  137,  123,  122,  247,  247,
+      134,  114,  132,   86,  135,  125,   90,  136,  247,   97,
+       29,  247,  247,  153,  156,  161,  165,  170,  176,  180,
+
+      187,  195,  200,  205,  212
     } ;
 
-static yyconst flex_int16_t yy_def[117] =
+static yyconst flex_int16_t yy_def[106] =
     {   0,
-      103,    1,    1,    3,    3,    5,  103,    7,    3,    3,
-      103,  103,  103,  103,  104,  105,  103,  106,  103,   19,
-       19,   20,  103,  107,   20,  103,  108,  109,  105,  103,
-      103,  103,  104,  103,  104,  110,  111,  103,  112,  113,
-      103,  103,  103,  106,   19,  103,   20,  103,  103,  103,
-       20,  108,  109,  103,  114,  110,  111,  115,  112,  112,
-      113,  103,  103,  103,  103,  103,  114,  115,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  116,  103,  116,  103,  116,
-
-      103,  103,    0,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103
+       93,    1,    1,    1,    1,    5,   93,    7,    1,    1,
+       93,   93,   93,   93,   94,   95,   93,   96,   17,   97,
+       96,   93,   98,   99,   93,   93,   93,   94,   93,   94,
+      100,   93,  101,  102,   93,   93,   93,   96,   93,   93,
+       93,   96,   98,   99,   93,  103,  100,  104,  101,  101,
+      102,   93,   93,   93,   93,   93,  103,  104,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,  105,   93,  105,   93,  105,
+       93,   93,    0,   93,   93,   93,   93,   93,   93,   93,
+
+       93,   93,   93,   93,   93
     } ;
 
-static yyconst flex_int16_t yy_nxt[339] =
+static yyconst flex_int16_t yy_nxt[281] =
     {   0,
-       12,   13,   14,   15,   12,   16,   12,   12,   12,   17,
-       18,   18,   18,   12,   19,   20,   20,   12,   12,   21,
-       19,   21,   19,   22,   20,   20,   20,   20,   20,   20,
-       20,   20,   20,   12,   12,   12,   32,   32,  102,   23,
-       12,   12,   12,   34,   20,   32,   32,   32,   32,   20,
-       20,   20,   20,   20,   24,   24,   24,   35,   25,   54,
-       54,   54,   26,   25,   25,   25,   25,   12,   13,   14,
-       15,   27,   12,   27,   27,   27,   23,   27,   27,   27,
-       12,   28,   28,   28,   12,   12,   28,   28,   28,   28,
-       28,   28,   28,   28,   28,   28,   28,   28,   28,   28,
-
-       12,   12,   29,   36,  103,   34,   17,   30,   31,   31,
-       29,   54,   54,   54,   17,   30,   31,   31,   39,   35,
-       52,   40,   52,   52,   52,  103,   78,   38,   38,   46,
-      101,   60,   79,   41,   69,   97,   42,   94,   43,   45,
-       45,   45,   46,   45,   47,   47,   93,   92,   45,   45,
-       45,   45,   47,   47,   47,   47,   47,   47,   47,   47,
-       47,   47,   47,   47,   47,   39,   47,   91,   40,   90,
-       99,   47,   47,   47,   47,   54,   54,   54,   89,   88,
-       41,   55,   87,   49,  100,   43,   51,   51,   51,   86,
-       51,   95,   95,   96,   85,   51,   51,   51,   51,   52,
-
-       99,   52,   52,   52,   95,   95,   96,   84,   46,   83,
-       82,   81,   39,   79,  100,   33,   33,   33,   33,   33,
-       33,   33,   33,   37,   80,   77,   37,   37,   37,   44,
-       40,   44,   50,   76,   50,   52,   75,   52,   74,   52,
-       52,   53,   73,   53,   53,   53,   53,   56,   56,   56,
-       72,   56,   56,   57,   71,   57,   57,   59,   59,   59,
-       59,   59,   59,   59,   59,   61,   61,   61,   61,   61,
-       61,   61,   61,   67,   70,   67,   68,   68,   68,   62,
-       68,   68,   98,   98,   98,   98,   98,   98,   98,   98,
-       60,   66,   65,   64,   63,   62,   60,   58,  103,   48,
-
-       48,  103,   11,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103
+       12,   13,   14,   15,   12,   16,   12,   12,   17,   12,
+       12,   12,   12,   18,   18,   18,   12,   12,   18,   18,
+       18,   18,   18,   18,   18,   18,   18,   18,   18,   18,
+       18,   12,   12,   19,   20,   20,   20,   92,   21,   25,
+       26,   26,   22,   21,   21,   21,   21,   12,   13,   14,
+       15,   23,   16,   23,   23,   19,   23,   23,   23,   12,
+       24,   24,   24,   12,   12,   24,   24,   24,   24,   24,
+       24,   24,   24,   24,   24,   24,   24,   24,   12,   12,
+       25,   26,   26,   27,   27,   27,   27,   29,   43,   29,
+       43,   43,   45,   45,   45,   50,   39,   59,   46,   93,
+
+       30,   33,   30,   34,   45,   45,   45,   27,   27,   68,
+       43,   91,   43,   43,   69,   35,   87,   36,   39,   37,
+       42,   42,   42,   39,   42,   45,   45,   45,   89,   42,
+       42,   42,   42,   85,   85,   86,   85,   85,   86,   89,
+       84,   90,   83,   82,   81,   80,   79,   78,   77,   76,
+       75,   74,   90,   28,   28,   28,   28,   28,   28,   28,
+       28,   31,   31,   31,   38,   38,   38,   38,   41,   73,
+       41,   43,   72,   43,   71,   43,   43,   44,   33,   44,
+       44,   44,   44,   47,   69,   47,   47,   49,   49,   49,
+       49,   49,   49,   49,   49,   51,   51,   51,   51,   51,
+
+       51,   51,   51,   57,   70,   57,   58,   58,   58,   67,
+       58,   58,   88,   88,   88,   88,   88,   88,   88,   88,
+       34,   66,   65,   64,   63,   62,   61,   60,   52,   50,
+       39,   56,   39,   55,   54,   53,   52,   50,   48,   93,
+       40,   39,   32,   93,   19,   19,   11,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93
     } ;
 
-static yyconst flex_int16_t yy_chk[339] =
+static yyconst flex_int16_t yy_chk[281] =
     {   0,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
         1,    1,    1,    1,    1,    1,    1,    1,    1,    1,
-        1,    1,    1,    1,    1,    3,   13,   13,  101,    3,
-        3,    3,    3,   15,    3,   14,   14,   32,   32,    3,
-        3,    3,    3,    3,    5,    5,    5,   15,    5,   31,
-       31,   31,    5,    5,    5,    5,    5,    7,    7,    7,
+        1,    1,    1,    5,    5,    5,    5,   91,    5,    9,
+        9,    9,    5,    5,    5,    5,    5,    7,    7,    7,
         7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
         7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
         7,    7,    7,    7,    7,    7,    7,    7,    7,    7,
-
-        7,    7,    9,   16,   29,   33,    9,    9,    9,    9,
-       10,   54,   54,   54,   10,   10,   10,   10,   17,   33,
-       28,   17,   28,   28,   28,  100,   72,   16,   29,   28,
-       97,   60,   72,   17,   60,   94,   17,   92,   17,   19,
-       19,   19,   19,   19,   19,   19,   91,   88,   19,   19,
-       19,   19,   19,   19,   19,   19,   19,   19,   19,   19,
-       19,   19,   20,   20,   20,   23,   20,   87,   23,   86,
-       96,   20,   20,   20,   20,   30,   30,   30,   85,   84,
-       23,   30,   83,   23,   96,   23,   25,   25,   25,   82,
-       25,   93,   93,   93,   81,   25,   25,   25,   25,   53,
-
-       98,   53,   53,   53,   95,   95,   95,   80,   53,   79,
-       78,   77,   76,   74,   98,  104,  104,  104,  104,  104,
-      104,  104,  104,  105,   73,   71,  105,  105,  105,  106,
-       70,  106,  107,   69,  107,  108,   68,  108,   66,  108,
-      108,  109,   65,  109,  109,  109,  109,  110,  110,  110,
-       64,  110,  110,  111,   63,  111,  111,  112,  112,  112,
-      112,  112,  112,  112,  112,  113,  113,  113,  113,  113,
-      113,  113,  113,  114,   62,  114,  115,  115,  115,   61,
-      115,  115,  116,  116,  116,  116,  116,  116,  116,  116,
-       59,   49,   43,   42,   41,   40,   39,   38,   35,   22,
-
-       21,   11,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103,  103,  103,
-      103,  103,  103,  103,  103,  103,  103,  103
+       10,   10,   10,   13,   13,   14,   14,   15,   24,   28,
+       24,   24,   25,   25,   25,   50,   24,   50,   25,   90,
+
+       15,   17,   28,   17,   26,   26,   26,   27,   27,   62,
+       44,   87,   44,   44,   62,   17,   84,   17,   44,   17,
+       21,   21,   21,   21,   21,   45,   45,   45,   86,   21,
+       21,   21,   21,   83,   83,   83,   85,   85,   85,   88,
+       82,   86,   81,   78,   77,   76,   75,   74,   73,   72,
+       71,   70,   88,   94,   94,   94,   94,   94,   94,   94,
+       94,   95,   95,   95,   96,   96,   96,   96,   97,   69,
+       97,   98,   68,   98,   67,   98,   98,   99,   66,   99,
+       99,   99,   99,  100,   64,  100,  100,  101,  101,  101,
+      101,  101,  101,  101,  101,  102,  102,  102,  102,  102,
+
+      102,  102,  102,  103,   63,  103,  104,  104,  104,   61,
+      104,  104,  105,  105,  105,  105,  105,  105,  105,  105,
+       60,   59,   58,   56,   55,   54,   53,   52,   51,   49,
+       42,   40,   38,   37,   36,   35,   34,   33,   32,   30,
+       19,   18,   16,   11,    4,    3,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93,
+       93,   93,   93,   93,   93,   93,   93,   93,   93,   93
     } ;
 
-/* Table of booleans, true if rule could match eol. */
-static yyconst flex_int32_t yy_rule_can_match_eol[21] =
-    {   0,
-1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 1, 0, 
-    0,     };
-
 static yy_state_type yy_last_accepting_state;
 static char *yy_last_accepting_cpos;
 
@@ -616,6 +580,13 @@ char *yytext;
 #include "srcpos.h"
 #include "dtc-parser.tab.h"
 
+YYLTYPE yylloc;
+
+/* CAUTION: this will stop working if we ever use yyless() or yyunput() */
+#define	YY_USER_ACTION \
+	{ \
+		srcpos_update(&yylloc, yytext, yyleng); \
+	}
 
 /*#define LEXDEBUG	1*/
 
@@ -625,19 +596,14 @@ char *yytext;
 #define DPRINT(fmt, ...)	do { } while (0)
 #endif
 
-static int dts_version; /* = 0 */
+static int dts_version = 1;
 
-#define BEGIN_DEFAULT()	if (dts_version == 0) { \
-				DPRINT("<INITIAL>\n"); \
-				BEGIN(INITIAL); \
-			} else { \
-				DPRINT("<V1>\n"); \
+#define BEGIN_DEFAULT()		DPRINT("<V1>\n"); \
 				BEGIN(V1); \
-			}
 
 static void push_input_file(const char *filename);
 static int pop_input_file(void);
-#line 641 "dtc-lexer.lex.c"
+#line 607 "dtc-lexer.lex.c"
 
 #define INITIAL 0
 #define INCLUDE 1
@@ -826,9 +792,9 @@ YY_DECL
 	register char *yy_cp, *yy_bp;
 	register int yy_act;
 
-#line 64 "dtc-lexer.l"
+#line 66 "dtc-lexer.l"
 
-#line 832 "dtc-lexer.lex.c"
+#line 798 "dtc-lexer.lex.c"
 
 	if ( !(yy_init) )
 		{
@@ -881,35 +847,21 @@ yy_match:
 			while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
 				{
 				yy_current_state = (int) yy_def[yy_current_state];
-				if ( yy_current_state >= 104 )
+				if ( yy_current_state >= 94 )
 					yy_c = yy_meta[(unsigned int) yy_c];
 				}
 			yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
 			++yy_cp;
 			}
-		while ( yy_base[yy_current_state] != 303 );
+		while ( yy_current_state != 93 );
+		yy_cp = (yy_last_accepting_cpos);
+		yy_current_state = (yy_last_accepting_state);
 
 yy_find_action:
 		yy_act = yy_accept[yy_current_state];
-		if ( yy_act == 0 )
-			{ /* have to back up */
-			yy_cp = (yy_last_accepting_cpos);
-			yy_current_state = (yy_last_accepting_state);
-			yy_act = yy_accept[yy_current_state];
-			}
 
 		YY_DO_BEFORE_ACTION;
 
-		if ( yy_act != YY_END_OF_BUFFER && yy_rule_can_match_eol[yy_act] )
-			{
-			int yyl;
-			for ( yyl = 0; yyl < yyleng; ++yyl )
-				if ( yytext[yyl] == '\n' )
-					   
-    yylineno++;
-;
-			}
-
 do_action:	/* This label is used only to access EOF actions. */
 
 		switch ( yy_act )
@@ -924,7 +876,7 @@ do_action:	/* This label is used only to access EOF actions. */
 case 1:
 /* rule 1 can match eol */
 YY_RULE_SETUP
-#line 65 "dtc-lexer.l"
+#line 67 "dtc-lexer.l"
 {
 			char *name = strchr(yytext, '\"') + 1;
 			yytext[yyleng-1] = '\0';
@@ -936,7 +888,7 @@ case YY_STATE_EOF(INCLUDE):
 case YY_STATE_EOF(BYTESTRING):
 case YY_STATE_EOF(PROPNODENAME):
 case YY_STATE_EOF(V1):
-#line 71 "dtc-lexer.l"
+#line 73 "dtc-lexer.l"
 {
 			if (!pop_input_file()) {
 				yyterminate();
@@ -946,23 +898,18 @@ case YY_STATE_EOF(V1):
 case 2:
 /* rule 2 can match eol */
 YY_RULE_SETUP
-#line 77 "dtc-lexer.l"
+#line 79 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("String: %s\n", yytext);
 			yylval.data = data_copy_escape_string(yytext+1,
 					yyleng-2);
-			yylloc.first_line = yylineno;
 			return DT_STRING;
 		}
 	YY_BREAK
 case 3:
 YY_RULE_SETUP
-#line 87 "dtc-lexer.l"
+#line 86 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /dts-v1/\n");
 			dts_version = 1;
 			BEGIN_DEFAULT();
@@ -971,10 +918,8 @@ YY_RULE_SETUP
 	YY_BREAK
 case 4:
 YY_RULE_SETUP
-#line 96 "dtc-lexer.l"
+#line 93 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Keyword: /memreserve/\n");
 			BEGIN_DEFAULT();
 			return DT_MEMRESERVE;
@@ -982,158 +927,100 @@ YY_RULE_SETUP
 	YY_BREAK
 case 5:
 YY_RULE_SETUP
-#line 104 "dtc-lexer.l"
+#line 99 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Label: %s\n", yytext);
-			yylval.labelref = strdup(yytext);
+			yylval.labelref = xstrdup(yytext);
 			yylval.labelref[yyleng-1] = '\0';
 			return DT_LABEL;
 		}
 	YY_BREAK
 case 6:
 YY_RULE_SETUP
-#line 113 "dtc-lexer.l"
-{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			if (*yytext == 'b')
-				yylval.cbase = 2;
-			else if (*yytext == 'o')
-				yylval.cbase = 8;
-			else if (*yytext == 'd')
-				yylval.cbase = 10;
-			else
-				yylval.cbase = 16;
-			DPRINT("Base: %d\n", yylval.cbase);
-			return DT_BASE;
-		}
-	YY_BREAK
-case 7:
-YY_RULE_SETUP
-#line 128 "dtc-lexer.l"
+#line 106 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			yylval.literal = strdup(yytext);
-			DPRINT("Literal: '%s'\n", yylval.literal);
-			return DT_LEGACYLITERAL;
-		}
-	YY_BREAK
-case 8:
-YY_RULE_SETUP
-#line 136 "dtc-lexer.l"
-{
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			yylval.literal = strdup(yytext);
+			yylval.literal = xstrdup(yytext);
 			DPRINT("Literal: '%s'\n", yylval.literal);
 			return DT_LITERAL;
 		}
 	YY_BREAK
-case 9:
+case 7:
 YY_RULE_SETUP
-#line 144 "dtc-lexer.l"
+#line 112 "dtc-lexer.l"
 {	/* label reference */
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Ref: %s\n", yytext+1);
-			yylval.labelref = strdup(yytext+1);
+			yylval.labelref = xstrdup(yytext+1);
 			return DT_REF;
 		}
 	YY_BREAK
-case 10:
+case 8:
 YY_RULE_SETUP
-#line 152 "dtc-lexer.l"
+#line 118 "dtc-lexer.l"
 {	/* new-style path reference */
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			yytext[yyleng-1] = '\0';
 			DPRINT("Ref: %s\n", yytext+2);
-			yylval.labelref = strdup(yytext+2);
+			yylval.labelref = xstrdup(yytext+2);
 			return DT_REF;
 		}
 	YY_BREAK
-case 11:
-YY_RULE_SETUP
-#line 161 "dtc-lexer.l"
-{	/* old-style path reference */
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
-			DPRINT("Ref: %s\n", yytext+1);
-			yylval.labelref = strdup(yytext+1);
-			return DT_REF;
-		}
-	YY_BREAK
-case 12:
+case 9:
 YY_RULE_SETUP
-#line 169 "dtc-lexer.l"
+#line 125 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			yylval.byte = strtol(yytext, NULL, 16);
 			DPRINT("Byte: %02x\n", (int)yylval.byte);
 			return DT_BYTE;
 		}
 	YY_BREAK
-case 13:
+case 10:
 YY_RULE_SETUP
-#line 177 "dtc-lexer.l"
+#line 131 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("/BYTESTRING\n");
 			BEGIN_DEFAULT();
 			return ']';
 		}
 	YY_BREAK
-case 14:
+case 11:
 YY_RULE_SETUP
-#line 185 "dtc-lexer.l"
+#line 137 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("PropNodeName: %s\n", yytext);
-			yylval.propnodename = strdup(yytext);
+			yylval.propnodename = xstrdup(yytext);
 			BEGIN_DEFAULT();
 			return DT_PROPNODENAME;
 		}
 	YY_BREAK
-case 15:
+case 12:
 YY_RULE_SETUP
-#line 194 "dtc-lexer.l"
+#line 144 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Binary Include\n");
 			return DT_INCBIN;
 		}
 	YY_BREAK
-case 16:
-/* rule 16 can match eol */
+case 13:
+/* rule 13 can match eol */
 YY_RULE_SETUP
-#line 201 "dtc-lexer.l"
+#line 149 "dtc-lexer.l"
 /* eat whitespace */
 	YY_BREAK
-case 17:
-/* rule 17 can match eol */
+case 14:
+/* rule 14 can match eol */
 YY_RULE_SETUP
-#line 202 "dtc-lexer.l"
+#line 150 "dtc-lexer.l"
 /* eat C-style comments */
 	YY_BREAK
-case 18:
-/* rule 18 can match eol */
+case 15:
+/* rule 15 can match eol */
 YY_RULE_SETUP
-#line 203 "dtc-lexer.l"
+#line 151 "dtc-lexer.l"
 /* eat C++-style comments */
 	YY_BREAK
-case 19:
+case 16:
 YY_RULE_SETUP
-#line 205 "dtc-lexer.l"
+#line 153 "dtc-lexer.l"
 {
-			yylloc.file = srcpos_file;
-			yylloc.first_line = yylineno;
 			DPRINT("Char: %c (\\x%02x)\n", yytext[0],
 				(unsigned)yytext[0]);
 			if (yytext[0] == '[') {
@@ -1148,12 +1035,12 @@ YY_RULE_SETUP
 			return yytext[0];
 		}
 	YY_BREAK
-case 20:
+case 17:
 YY_RULE_SETUP
-#line 222 "dtc-lexer.l"
+#line 168 "dtc-lexer.l"
 ECHO;
 	YY_BREAK
-#line 1157 "dtc-lexer.lex.c"
+#line 1044 "dtc-lexer.lex.c"
 
 	case YY_END_OF_BUFFER:
 		{
@@ -1218,7 +1105,8 @@ ECHO;
 
 			else
 				{
-				yy_cp = (yy_c_buf_p);
+				yy_cp = (yy_last_accepting_cpos);
+				yy_current_state = (yy_last_accepting_state);
 				goto yy_find_action;
 				}
 			}
@@ -1443,7 +1331,7 @@ static int yy_get_next_buffer (void)
 		while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
 			{
 			yy_current_state = (int) yy_def[yy_current_state];
-			if ( yy_current_state >= 104 )
+			if ( yy_current_state >= 94 )
 				yy_c = yy_meta[(unsigned int) yy_c];
 			}
 		yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
@@ -1471,11 +1359,11 @@ static int yy_get_next_buffer (void)
 	while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
 		{
 		yy_current_state = (int) yy_def[yy_current_state];
-		if ( yy_current_state >= 104 )
+		if ( yy_current_state >= 94 )
 			yy_c = yy_meta[(unsigned int) yy_c];
 		}
 	yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
-	yy_is_jam = (yy_current_state == 103);
+	yy_is_jam = (yy_current_state == 93);
 
 	return yy_is_jam ? 0 : yy_current_state;
 }
@@ -1550,11 +1438,6 @@ static int yy_get_next_buffer (void)
 	*(yy_c_buf_p) = '\0';	/* preserve yytext */
 	(yy_hold_char) = *++(yy_c_buf_p);
 
-	if ( c == '\n' )
-		   
-    yylineno++;
-;
-
 	return c;
 }
 #endif	/* ifndef YY_NO_INPUT */
@@ -1669,10 +1552,6 @@ static void yy_load_buffer_state  (void)
 	yyfree((void *) b  );
 }
 
-#ifndef __cplusplus
-extern int isatty (int );
-#endif /* __cplusplus */
-    
 /* Initializes or reinitializes a buffer.
  * This function is sometimes called more than once on the same buffer,
  * such as during a yyrestart() or at EOF.
@@ -1696,7 +1575,7 @@ extern int isatty (int );
         b->yy_bs_column = 0;
     }
 
-        b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
+        b->yy_is_interactive = 0;
 
 	errno = oerrno;
 }
@@ -2025,9 +1904,6 @@ static int yy_init_globals (void)
      * This function is called from yylex_destroy(), so don't allocate here.
      */
 
-    /* We do not touch yylineno unless the option is enabled. */
-    yylineno =  1;
-    
     (yy_buffer_stack) = 0;
     (yy_buffer_stack_top) = 0;
     (yy_buffer_stack_max) = 0;
@@ -2120,104 +1996,29 @@ void yyfree (void * ptr )
 
 #define YYTABLES_NAME "yytables"
 
-#line 222 "dtc-lexer.l"
-
-
-
-
-/*
- * Stack of nested include file contexts.
- */
-
-struct incl_file {
-	struct dtc_file *file;
-	YY_BUFFER_STATE yy_prev_buf;
-	int yy_prev_lineno;
-	struct incl_file *prev;
-};
-
-static struct incl_file *incl_file_stack;
+#line 168 "dtc-lexer.l"
 
 
-/*
- * Detect infinite include recursion.
- */
-#define MAX_INCLUDE_DEPTH	(100)
-
-static int incl_depth = 0;
-
 
 static void push_input_file(const char *filename)
 {
-	struct incl_file *incl_file;
-	struct dtc_file *newfile;
-	struct search_path search, *searchptr = NULL;
-
 	assert(filename);
 
-	if (incl_depth++ >= MAX_INCLUDE_DEPTH)
-		die("Includes nested too deeply");
-
-	if (srcpos_file) {
-		search.dir = srcpos_file->dir;
-		search.next = NULL;
-		search.prev = NULL;
-		searchptr = &search;
-	}
-
-	newfile = dtc_open_file(filename, searchptr);
+	srcfile_push(filename);
 
-	incl_file = xmalloc(sizeof(struct incl_file));
+	yyin = current_srcfile->f;
 
-	/*
-	 * Save current context.
-	 */
-	incl_file->yy_prev_buf = YY_CURRENT_BUFFER;
-	incl_file->yy_prev_lineno = yylineno;
-	incl_file->file = srcpos_file;
-	incl_file->prev = incl_file_stack;
-
-	incl_file_stack = incl_file;
-
-	/*
-	 * Establish new context.
-	 */
-	srcpos_file = newfile;
-	yylineno = 1;
-	yyin = newfile->file;
-	yy_switch_to_buffer(yy_create_buffer(yyin,YY_BUF_SIZE));
+	yypush_buffer_state(yy_create_buffer(yyin,YY_BUF_SIZE));
 }
 
 
 static int pop_input_file(void)
 {
-	struct incl_file *incl_file;
-
-	if (incl_file_stack == 0)
+	if (srcfile_pop() == 0)
 		return 0;
 
-	dtc_close_file(srcpos_file);
-
-	/*
-	 * Pop.
-	 */
-	--incl_depth;
-	incl_file = incl_file_stack;
-	incl_file_stack = incl_file->prev;
-
-	/*
-	 * Recover old context.
-	 */
-	yy_delete_buffer(YY_CURRENT_BUFFER);
-	yy_switch_to_buffer(incl_file->yy_prev_buf);
-	yylineno = incl_file->yy_prev_lineno;
-	srcpos_file = incl_file->file;
-	yyin = incl_file->file ? incl_file->file->file : NULL;
-
-	/*
-	 * Free old state.
-	 */
-	free(incl_file);
+	yypop_buffer_state();
+	yyin = current_srcfile->f;
 
 	return 1;
 }
scripts/dtc/dtc-parser.tab.c_shipped +440 -450
index 2712937..ac5eceb 100644
@@ -1,24 +1,23 @@
-/* A Bison parser, made by GNU Bison 2.3.  */
 
-/* Skeleton implementation for Bison's Yacc-like parsers in C
+/* A Bison parser, made by GNU Bison 2.4.1.  */
 
-   Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+/* Skeleton implementation for Bison's Yacc-like parsers in C
+   
+      Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
+   
+   This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street, Fifth Floor,
-   Boston, MA 02110-1301, USA.  */
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* As a special exception, you may create a larger work that contains
    part or all of the Bison parser skeleton and distribute that work
@@ -29,7 +28,7 @@
    special exception, which will cause the skeleton and the resulting
    Bison output files to be licensed under the GNU General Public
    License without this special exception.
-
+   
    This special exception was added by the Free Software Foundation in
    version 2.2 of Bison.  */
 
@@ -47,7 +46,7 @@
 #define YYBISON 1
 
 /* Bison version.  */
-#define YYBISON_VERSION "2.3"
+#define YYBISON_VERSION "2.4.1"
 
 /* Skeleton name.  */
 #define YYSKELETON_NAME "yacc.c"
@@ -55,55 +54,32 @@
 /* Pure parsers.  */
 #define YYPURE 0
 
-/* Using locations.  */
-#define YYLSP_NEEDED 1
-
+/* Push parsers.  */
+#define YYPUSH 0
 
+/* Pull parsers.  */
+#define YYPULL 1
 
-/* Tokens.  */
-#ifndef YYTOKENTYPE
-# define YYTOKENTYPE
-   /* Put the tokens into the symbol table, so that GDB and other debuggers
-      know about them.  */
-   enum yytokentype {
-     DT_V1 = 258,
-     DT_MEMRESERVE = 259,
-     DT_PROPNODENAME = 260,
-     DT_LITERAL = 261,
-     DT_LEGACYLITERAL = 262,
-     DT_BASE = 263,
-     DT_BYTE = 264,
-     DT_STRING = 265,
-     DT_LABEL = 266,
-     DT_REF = 267,
-     DT_INCBIN = 268
-   };
-#endif
-/* Tokens.  */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
+/* Using locations.  */
+#define YYLSP_NEEDED 0
 
 
 
 /* Copy the first part of user declarations.  */
-#line 23 "dtc-parser.y"
+
+/* Line 189 of yacc.c  */
+#line 21 "dtc-parser.y"
 
 #include <stdio.h>
 
 #include "dtc.h"
 #include "srcpos.h"
 
+YYLTYPE yylloc;
+
 extern int yylex(void);
+extern void print_error(char const *fmt, ...);
+extern void yyerror(char const *s);
 
 extern struct boot_info *the_boot_info;
 extern int treesource_error;
@@ -111,6 +87,9 @@ extern int treesource_error;
 static unsigned long long eval_literal(const char *s, int base, int bits);
 
 
+/* Line 189 of yacc.c  */
+#line 92 "dtc-parser.tab.c"
+
 /* Enabling traces.  */
 #ifndef YYDEBUG
 # define YYDEBUG 0
@@ -129,10 +108,35 @@ static unsigned long long eval_literal(const char *s, int base, int bits);
 # define YYTOKEN_TABLE 0
 #endif
 
+
+/* Tokens.  */
+#ifndef YYTOKENTYPE
+# define YYTOKENTYPE
+   /* Put the tokens into the symbol table, so that GDB and other debuggers
+      know about them.  */
+   enum yytokentype {
+     DT_V1 = 258,
+     DT_MEMRESERVE = 259,
+     DT_PROPNODENAME = 260,
+     DT_LITERAL = 261,
+     DT_BASE = 262,
+     DT_BYTE = 263,
+     DT_STRING = 264,
+     DT_LABEL = 265,
+     DT_REF = 266,
+     DT_INCBIN = 267
+   };
+#endif
+
+
+
 #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
 typedef union YYSTYPE
-#line 37 "dtc-parser.y"
 {
+
+/* Line 214 of yacc.c  */
+#line 39 "dtc-parser.y"
+
 	char *propnodename;
 	char *literal;
 	char *labelref;
@@ -147,34 +151,23 @@ typedef union YYSTYPE
 	struct node *node;
 	struct node *nodelist;
 	struct reserve_info *re;
-}
-/* Line 187 of yacc.c.  */
-#line 153 "dtc-parser.tab.c"
-	YYSTYPE;
+
+
+
+/* Line 214 of yacc.c  */
+#line 159 "dtc-parser.tab.c"
+} YYSTYPE;
+# define YYSTYPE_IS_TRIVIAL 1
 # define yystype YYSTYPE /* obsolescent; will be withdrawn */
 # define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
-#endif
-
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
-  int first_line;
-  int first_column;
-  int last_line;
-  int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
 #endif
 
 
 /* Copy the second part of user declarations.  */
 
 
-/* Line 216 of yacc.c.  */
-#line 178 "dtc-parser.tab.c"
+/* Line 264 of yacc.c  */
+#line 171 "dtc-parser.tab.c"
 
 #ifdef short
 # undef short
@@ -249,14 +242,14 @@ typedef short int yytype_int16;
 #if (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 static int
-YYID (int i)
+YYID (int yyi)
 #else
 static int
-YYID (i)
-    int i;
+YYID (yyi)
+    int yyi;
 #endif
 {
-  return i;
+  return yyi;
 }
 #endif
 
@@ -332,15 +325,13 @@ void free (void *); /* INFRINGES ON USER NAME SPACE */
 
 #if (! defined yyoverflow \
      && (! defined __cplusplus \
-	 || (defined YYLTYPE_IS_TRIVIAL && YYLTYPE_IS_TRIVIAL \
-	     && defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
+	 || (defined YYSTYPE_IS_TRIVIAL && YYSTYPE_IS_TRIVIAL)))
 
 /* A type that is properly aligned for any stack member.  */
 union yyalloc
 {
-  yytype_int16 yyss;
-  YYSTYPE yyvs;
-    YYLTYPE yyls;
+  yytype_int16 yyss_alloc;
+  YYSTYPE yyvs_alloc;
 };
 
 /* The size of the maximum gap between one aligned stack and the next.  */
@@ -349,8 +340,8 @@ union yyalloc
 /* The size of an array large to enough to hold all stacks, each with
    N elements.  */
 # define YYSTACK_BYTES(N) \
-     ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE) + sizeof (YYLTYPE)) \
-      + 2 * YYSTACK_GAP_MAXIMUM)
+     ((N) * (sizeof (yytype_int16) + sizeof (YYSTYPE)) \
+      + YYSTACK_GAP_MAXIMUM)
 
 /* Copy COUNT objects from FROM to TO.  The source and destination do
    not overlap.  */
@@ -375,12 +366,12 @@ union yyalloc
    elements in the stack, and YYPTR gives the new location of the
    stack.  Advance YYPTR to a properly aligned location for the next
    stack.  */
-# define YYSTACK_RELOCATE(Stack)					\
+# define YYSTACK_RELOCATE(Stack_alloc, Stack)				\
     do									\
       {									\
 	YYSIZE_T yynewbytes;						\
-	YYCOPY (&yyptr->Stack, Stack, yysize);				\
-	Stack = &yyptr->Stack;						\
+	YYCOPY (&yyptr->Stack_alloc, Stack, yysize);			\
+	Stack = &yyptr->Stack_alloc;					\
 	yynewbytes = yystacksize * sizeof (*Stack) + YYSTACK_GAP_MAXIMUM; \
 	yyptr += yynewbytes / sizeof (*yyptr);				\
       }									\
@@ -389,22 +380,22 @@ union yyalloc
 #endif
 
 /* YYFINAL -- State number of the termination state.  */
-#define YYFINAL  9
+#define YYFINAL  4
 /* YYLAST -- Last index in YYTABLE.  */
-#define YYLAST   73
+#define YYLAST   56
 
 /* YYNTOKENS -- Number of terminals.  */
-#define YYNTOKENS  27
+#define YYNTOKENS  25
 /* YYNNTS -- Number of nonterminals.  */
-#define YYNNTS  20
+#define YYNNTS  16
 /* YYNRULES -- Number of rules.  */
-#define YYNRULES  45
+#define YYNRULES  39
 /* YYNRULES -- Number of states.  */
-#define YYNSTATES  76
+#define YYNSTATES  67
 
 /* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX.  */
 #define YYUNDEFTOK  2
-#define YYMAXUTOK   268
+#define YYMAXUTOK   267
 
 #define YYTRANSLATE(YYX)						\
   ((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
@@ -416,15 +407,15 @@ static const yytype_uint8 yytranslate[] =
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-      24,    26,     2,     2,    25,    15,     2,    16,     2,     2,
-       2,     2,     2,     2,     2,     2,     2,     2,     2,    14,
-      20,    19,    21,     2,     2,     2,     2,     2,     2,     2,
+      22,    24,     2,     2,    23,     2,     2,    14,     2,     2,
+       2,     2,     2,     2,     2,     2,     2,     2,     2,    13,
+      18,    17,    19,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,    22,     2,    23,     2,     2,     2,     2,     2,     2,
+       2,    20,     2,    21,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
-       2,     2,     2,    17,     2,    18,     2,     2,     2,     2,
+       2,     2,     2,    15,     2,    16,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
@@ -438,7 +429,7 @@ static const yytype_uint8 yytranslate[] =
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     2,     2,     2,     2,
        2,     2,     2,     2,     2,     2,     1,     2,     3,     4,
-       5,     6,     7,     8,     9,    10,    11,    12,    13
+       5,     6,     7,     8,     9,    10,    11,    12
 };
 
 #if YYDEBUG
@@ -446,41 +437,37 @@ static const yytype_uint8 yytranslate[] =
    YYRHS.  */
 static const yytype_uint8 yyprhs[] =
 {
-       0,     0,     3,     8,    11,    12,    15,    21,    22,    25,
-      27,    34,    36,    38,    41,    47,    48,    51,    57,    61,
-      64,    69,    74,    77,    87,    93,    96,    97,   100,   103,
-     104,   107,   110,   113,   114,   116,   118,   121,   122,   125,
-     128,   129,   132,   135,   139,   140
+       0,     0,     3,     8,     9,    12,    17,    20,    22,    25,
+      29,    33,    39,    40,    43,    48,    51,    54,    57,    62,
+      67,    70,    80,    86,    89,    90,    93,    96,    97,   100,
+     103,   106,   108,   109,   112,   115,   116,   119,   122,   125
 };
 
 /* YYRHS -- A `-1'-separated list of the rules' RHS.  */
 static const yytype_int8 yyrhs[] =
 {
-      28,     0,    -1,     3,    14,    29,    34,    -1,    31,    34,
-      -1,    -1,    30,    29,    -1,    46,     4,    33,    33,    14,
-      -1,    -1,    32,    31,    -1,    30,    -1,    46,     4,    33,
-      15,    33,    14,    -1,     6,    -1,     7,    -1,    16,    35,
-      -1,    17,    36,    44,    18,    14,    -1,    -1,    36,    37,
-      -1,    46,     5,    19,    38,    14,    -1,    46,     5,    14,
-      -1,    39,    10,    -1,    39,    20,    40,    21,    -1,    39,
-      22,    43,    23,    -1,    39,    12,    -1,    39,    13,    24,
-      10,    25,    33,    25,    33,    26,    -1,    39,    13,    24,
-      10,    26,    -1,    38,    11,    -1,    -1,    38,    25,    -1,
-      39,    11,    -1,    -1,    40,    42,    -1,    40,    12,    -1,
-      40,    11,    -1,    -1,     8,    -1,     6,    -1,    41,     7,
-      -1,    -1,    43,     9,    -1,    43,    11,    -1,    -1,    45,
-      44,    -1,    45,    37,    -1,    46,     5,    35,    -1,    -1,
-      11,    -1
+      26,     0,    -1,     3,    13,    27,    30,    -1,    -1,    28,
+      27,    -1,     4,    29,    29,    13,    -1,    10,    28,    -1,
+       6,    -1,    14,    31,    -1,    30,    14,    31,    -1,    30,
+      11,    31,    -1,    15,    32,    39,    16,    13,    -1,    -1,
+      32,    33,    -1,     5,    17,    34,    13,    -1,     5,    13,
+      -1,    10,    33,    -1,    35,     9,    -1,    35,    18,    36,
+      19,    -1,    35,    20,    38,    21,    -1,    35,    11,    -1,
+      35,    12,    22,     9,    23,    29,    23,    29,    24,    -1,
+      35,    12,    22,     9,    24,    -1,    34,    10,    -1,    -1,
+      34,    23,    -1,    35,    10,    -1,    -1,    36,    37,    -1,
+      36,    11,    -1,    36,    10,    -1,     6,    -1,    -1,    38,
+       8,    -1,    38,    10,    -1,    -1,    40,    39,    -1,    40,
+      33,    -1,     5,    31,    -1,    10,    40,    -1
 };
 
 /* YYRLINE[YYN] -- source line where rule number YYN was defined.  */
 static const yytype_uint16 yyrline[] =
 {
-       0,    89,    89,    93,   101,   104,   111,   119,   122,   129,
-     133,   140,   144,   151,   158,   166,   169,   176,   180,   187,
-     191,   195,   199,   203,   220,   231,   239,   242,   246,   254,
-     257,   261,   266,   274,   277,   281,   285,   293,   296,   300,
-     308,   311,   315,   323,   331,   334
+       0,    86,    86,    95,    98,   105,   109,   117,   124,   128,
+     132,   145,   153,   156,   163,   167,   171,   179,   183,   187,
+     191,   195,   212,   222,   230,   233,   237,   245,   248,   252,
+     257,   264,   272,   275,   279,   287,   290,   294,   302,   306
 };
 #endif
 
@@ -490,13 +477,12 @@ static const yytype_uint16 yyrline[] =
 static const char *const yytname[] =
 {
   "$end", "error", "$undefined", "DT_V1", "DT_MEMRESERVE",
-  "DT_PROPNODENAME", "DT_LITERAL", "DT_LEGACYLITERAL", "DT_BASE",
-  "DT_BYTE", "DT_STRING", "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'-'",
-  "'/'", "'{'", "'}'", "'='", "'<'", "'>'", "'['", "']'", "'('", "','",
-  "')'", "$accept", "sourcefile", "memreserves", "memreserve",
-  "v0_memreserves", "v0_memreserve", "addr", "devicetree", "nodedef",
-  "proplist", "propdef", "propdata", "propdataprefix", "celllist",
-  "cellbase", "cellval", "bytestring", "subnodes", "subnode", "label", 0
+  "DT_PROPNODENAME", "DT_LITERAL", "DT_BASE", "DT_BYTE", "DT_STRING",
+  "DT_LABEL", "DT_REF", "DT_INCBIN", "';'", "'/'", "'{'", "'}'", "'='",
+  "'<'", "'>'", "'['", "']'", "'('", "','", "')'", "$accept", "sourcefile",
+  "memreserves", "memreserve", "addr", "devicetree", "nodedef", "proplist",
+  "propdef", "propdata", "propdataprefix", "celllist", "cellval",
+  "bytestring", "subnodes", "subnode", 0
 };
 #endif
 
@@ -506,29 +492,27 @@ static const char *const yytname[] =
 static const yytype_uint16 yytoknum[] =
 {
        0,   256,   257,   258,   259,   260,   261,   262,   263,   264,
-     265,   266,   267,   268,    59,    45,    47,   123,   125,    61,
-      60,    62,    91,    93,    40,    44,    41
+     265,   266,   267,    59,    47,   123,   125,    61,    60,    62,
+      91,    93,    40,    44,    41
 };
 # endif
 
 /* YYR1[YYN] -- Symbol number of symbol that rule YYN derives.  */
 static const yytype_uint8 yyr1[] =
 {
-       0,    27,    28,    28,    29,    29,    30,    31,    31,    32,
-      32,    33,    33,    34,    35,    36,    36,    37,    37,    38,
-      38,    38,    38,    38,    38,    38,    39,    39,    39,    40,
-      40,    40,    40,    41,    41,    42,    42,    43,    43,    43,
-      44,    44,    44,    45,    46,    46
+       0,    25,    26,    27,    27,    28,    28,    29,    30,    30,
+      30,    31,    32,    32,    33,    33,    33,    34,    34,    34,
+      34,    34,    34,    34,    35,    35,    35,    36,    36,    36,
+      36,    37,    38,    38,    38,    39,    39,    39,    40,    40
 };
 
 /* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN.  */
 static const yytype_uint8 yyr2[] =
 {
-       0,     2,     4,     2,     0,     2,     5,     0,     2,     1,
-       6,     1,     1,     2,     5,     0,     2,     5,     3,     2,
-       4,     4,     2,     9,     5,     2,     0,     2,     2,     0,
-       2,     2,     2,     0,     1,     1,     2,     0,     2,     2,
-       0,     2,     2,     3,     0,     1
+       0,     2,     4,     0,     2,     4,     2,     1,     2,     3,
+       3,     5,     0,     2,     4,     2,     2,     2,     4,     4,
+       2,     9,     5,     2,     0,     2,     2,     0,     2,     2,
+       2,     1,     0,     2,     2,     0,     2,     2,     2,     2
 };
 
 /* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
@@ -536,86 +520,79 @@ static const yytype_uint8 yyr2[] =
    means the default is an error.  */
 static const yytype_uint8 yydefact[] =
 {
-       7,     0,    45,     0,     9,     0,     7,     0,     4,     1,
-       0,     3,     8,     0,     0,     4,     0,    15,    13,    11,
-      12,     0,     2,     5,     0,    40,     0,     0,     0,    16,
-       0,    40,     0,     0,     6,     0,    42,    41,     0,    10,
-      14,    18,    26,    43,     0,     0,    25,    17,    27,    19,
-      28,    22,     0,    29,    37,     0,    33,     0,     0,    35,
-      34,    32,    31,    20,     0,    30,    38,    39,    21,     0,
-      24,    36,     0,     0,     0,    23
+       0,     0,     0,     3,     1,     0,     0,     0,     3,     7,
+       0,     6,     0,     2,     4,     0,    12,     8,     0,     0,
+       5,    35,    10,     9,     0,     0,    13,     0,    35,    15,
+      24,    38,    16,    39,     0,    37,    36,     0,     0,    11,
+      23,    14,    25,    17,    26,    20,     0,    27,    32,     0,
+       0,     0,     0,    31,    30,    29,    18,    28,    33,    34,
+      19,     0,    22,     0,     0,     0,    21
 };
 
 /* YYDEFGOTO[NTERM-NUM].  */
 static const yytype_int8 yydefgoto[] =
 {
-      -1,     3,    14,     4,     5,     6,    27,    11,    18,    25,
-      29,    44,    45,    56,    64,    65,    57,    30,    31,     7
+      -1,     2,     7,     8,    10,    13,    17,    21,    26,    37,
+      38,    50,    57,    51,    27,    28
 };
 
 /* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
    STATE-NUM.  */
-#define YYPACT_NINF -14
+#define YYPACT_NINF -12
 static const yytype_int8 yypact[] =
 {
-      30,   -11,   -14,     7,   -14,    -1,    27,    13,    27,   -14,
-       8,   -14,   -14,    40,    -1,    27,    35,   -14,   -14,   -14,
-     -14,    21,   -14,   -14,    40,    24,    40,    28,    40,   -14,
-      32,    24,    46,    38,   -14,    39,   -14,   -14,    26,   -14,
-     -14,   -14,   -14,   -14,    -9,    10,   -14,   -14,   -14,   -14,
-     -14,   -14,    31,   -14,   -14,    44,    -2,     3,    23,   -14,
-     -14,   -14,   -14,   -14,    50,   -14,   -14,   -14,   -14,    40,
-     -14,   -14,    33,    40,    36,   -14
+      10,   -11,    18,    -1,   -12,    22,    -1,    15,    -1,   -12,
+      22,   -12,    20,     1,   -12,    17,   -12,   -12,    20,    20,
+     -12,     6,   -12,   -12,    21,     6,   -12,    23,     6,   -12,
+     -12,   -12,   -12,   -12,    28,   -12,   -12,    -6,    13,   -12,
+     -12,   -12,   -12,   -12,   -12,   -12,    24,   -12,   -12,    33,
+      -5,     0,    -4,   -12,   -12,   -12,   -12,   -12,   -12,   -12,
+     -12,    22,   -12,    25,    22,    19,   -12
 };
 
 /* YYPGOTO[NTERM-NUM].  */
 static const yytype_int8 yypgoto[] =
 {
-     -14,   -14,    48,    29,    53,   -14,   -13,    47,    34,   -14,
-      37,   -14,   -14,   -14,   -14,   -14,   -14,    42,   -14,    -7
+     -12,   -12,    36,    39,   -10,   -12,     8,   -12,    12,   -12,
+     -12,   -12,   -12,   -12,    27,    31
 };
 
 /* YYTABLE[YYPACT[STATE-NUM]].  What to do in state STATE-NUM.  If
    positive, shift that token.  If negative, reduce the rule which
    number is the opposite.  If zero, do what YYDEFACT says.
    If YYTABLE_NINF, syntax error.  */
-#define YYTABLE_NINF -45
-static const yytype_int8 yytable[] =
+#define YYTABLE_NINF -1
+static const yytype_uint8 yytable[] =
 {
-      21,    16,    46,     8,    59,    47,    60,     9,    16,    61,
-      62,    28,    66,    33,    67,    10,    48,    13,    32,    63,
-      49,    50,    51,    52,    32,    17,    68,    19,    20,   -44,
-      53,   -44,    54,     1,   -44,     2,    26,    15,     2,    24,
-      41,     2,    34,    17,    15,    42,    19,    20,    69,    70,
-      35,    38,    39,    40,    58,    55,    72,    71,    73,    12,
-      74,    22,    75,    23,     0,     0,     0,     0,    36,     0,
-       0,     0,    43,    37
+      15,    53,     3,     5,    40,    54,    55,    41,    58,     6,
+      59,    24,    18,     1,    56,    19,    25,    42,     4,    61,
+      62,    60,    43,    44,    45,    46,    22,    23,     9,    12,
+      20,    47,    31,    48,    29,    16,    16,    32,    30,    34,
+      35,    39,    52,    66,    14,    11,    49,     0,    64,     0,
+       0,    63,     0,     0,    65,    36,    33
 };
 
 static const yytype_int8 yycheck[] =
 {
-      13,     8,    11,    14,     6,    14,     8,     0,    15,    11,
-      12,    24,     9,    26,    11,    16,    25,     4,    25,    21,
-      10,    11,    12,    13,    31,    17,    23,     6,     7,     5,
-      20,     4,    22,     3,     4,    11,    15,     8,    11,     4,
-      14,    11,    14,    17,    15,    19,     6,     7,    25,    26,
-      18,     5,    14,    14,    10,    24,    69,     7,    25,     6,
-      73,    14,    26,    15,    -1,    -1,    -1,    -1,    31,    -1,
-      -1,    -1,    38,    31
+      10,     6,    13,     4,    10,    10,    11,    13,     8,    10,
+      10,     5,    11,     3,    19,    14,    10,    23,     0,    23,
+      24,    21,     9,    10,    11,    12,    18,    19,     6,    14,
+      13,    18,    24,    20,    13,    15,    15,    25,    17,    16,
+      28,    13,     9,    24,     8,     6,    22,    -1,    23,    -1,
+      -1,    61,    -1,    -1,    64,    28,    25
 };
 
 /* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
    symbol of state STATE-NUM.  */
 static const yytype_uint8 yystos[] =
 {
-       0,     3,    11,    28,    30,    31,    32,    46,    14,     0,
-      16,    34,    31,     4,    29,    30,    46,    17,    35,     6,
-       7,    33,    34,    29,     4,    36,    15,    33,    33,    37,
-      44,    45,    46,    33,    14,    18,    37,    44,     5,    14,
-      14,    14,    19,    35,    38,    39,    11,    14,    25,    10,
-      11,    12,    13,    20,    22,    24,    40,    43,    10,     6,
-       8,    11,    12,    21,    41,    42,     9,    11,    23,    25,
-      26,     7,    33,    25,    33,    26
+       0,     3,    26,    13,     0,     4,    10,    27,    28,     6,
+      29,    28,    14,    30,    27,    29,    15,    31,    11,    14,
+      13,    32,    31,    31,     5,    10,    33,    39,    40,    13,
+      17,    31,    33,    40,    16,    33,    39,    34,    35,    13,
+      10,    13,    23,     9,    10,    11,    12,    18,    20,    22,
+      36,    38,     9,     6,    10,    11,    19,    37,     8,    10,
+      21,    23,    24,    29,    23,    29,    24
 };
 
 #define yyerrok		(yyerrstatus = 0)
@@ -728,7 +705,7 @@ do {									  \
     {									  \
       YYFPRINTF (stderr, "%s ", Title);					  \
       yy_symbol_print (stderr,						  \
-		  Type, Value, Location); \
+		  Type, Value); \
       YYFPRINTF (stderr, "\n");						  \
     }									  \
 } while (YYID (0))
@@ -742,19 +719,17 @@ do {									  \
 #if (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 static void
-yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+yy_symbol_value_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
 #else
 static void
-yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
+yy_symbol_value_print (yyoutput, yytype, yyvaluep)
     FILE *yyoutput;
     int yytype;
     YYSTYPE const * const yyvaluep;
-    YYLTYPE const * const yylocationp;
 #endif
 {
   if (!yyvaluep)
     return;
-  YYUSE (yylocationp);
 # ifdef YYPRINT
   if (yytype < YYNTOKENS)
     YYPRINT (yyoutput, yytoknum[yytype], *yyvaluep);
@@ -776,14 +751,13 @@ yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp)
 #if (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 static void
-yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep, YYLTYPE const * const yylocationp)
+yy_symbol_print (FILE *yyoutput, int yytype, YYSTYPE const * const yyvaluep)
 #else
 static void
-yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
+yy_symbol_print (yyoutput, yytype, yyvaluep)
     FILE *yyoutput;
     int yytype;
     YYSTYPE const * const yyvaluep;
-    YYLTYPE const * const yylocationp;
 #endif
 {
   if (yytype < YYNTOKENS)
@@ -791,9 +765,7 @@ yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
   else
     YYFPRINTF (yyoutput, "nterm %s (", yytname[yytype]);
 
-  YY_LOCATION_PRINT (yyoutput, *yylocationp);
-  YYFPRINTF (yyoutput, ": ");
-  yy_symbol_value_print (yyoutput, yytype, yyvaluep, yylocationp);
+  yy_symbol_value_print (yyoutput, yytype, yyvaluep);
   YYFPRINTF (yyoutput, ")");
 }
 
@@ -805,17 +777,20 @@ yy_symbol_print (yyoutput, yytype, yyvaluep, yylocationp)
 #if (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 static void
-yy_stack_print (yytype_int16 *bottom, yytype_int16 *top)
+yy_stack_print (yytype_int16 *yybottom, yytype_int16 *yytop)
 #else
 static void
-yy_stack_print (bottom, top)
-    yytype_int16 *bottom;
-    yytype_int16 *top;
+yy_stack_print (yybottom, yytop)
+    yytype_int16 *yybottom;
+    yytype_int16 *yytop;
 #endif
 {
   YYFPRINTF (stderr, "Stack now");
-  for (; bottom <= top; ++bottom)
-    YYFPRINTF (stderr, " %d", *bottom);
+  for (; yybottom <= yytop; yybottom++)
+    {
+      int yybot = *yybottom;
+      YYFPRINTF (stderr, " %d", yybot);
+    }
   YYFPRINTF (stderr, "\n");
 }
 
@@ -833,12 +808,11 @@ do {								\
 #if (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 static void
-yy_reduce_print (YYSTYPE *yyvsp, YYLTYPE *yylsp, int yyrule)
+yy_reduce_print (YYSTYPE *yyvsp, int yyrule)
 #else
 static void
-yy_reduce_print (yyvsp, yylsp, yyrule)
+yy_reduce_print (yyvsp, yyrule)
     YYSTYPE *yyvsp;
-    YYLTYPE *yylsp;
     int yyrule;
 #endif
 {
@@ -850,18 +824,18 @@ yy_reduce_print (yyvsp, yylsp, yyrule)
   /* The symbols being reduced.  */
   for (yyi = 0; yyi < yynrhs; yyi++)
     {
-      fprintf (stderr, "   $%d = ", yyi + 1);
+      YYFPRINTF (stderr, "   $%d = ", yyi + 1);
       yy_symbol_print (stderr, yyrhs[yyprhs[yyrule] + yyi],
 		       &(yyvsp[(yyi + 1) - (yynrhs)])
-		       , &(yylsp[(yyi + 1) - (yynrhs)])		       );
-      fprintf (stderr, "\n");
+		       		       );
+      YYFPRINTF (stderr, "\n");
     }
 }
 
 # define YY_REDUCE_PRINT(Rule)		\
 do {					\
   if (yydebug)				\
-    yy_reduce_print (yyvsp, yylsp, Rule); \
+    yy_reduce_print (yyvsp, Rule); \
 } while (YYID (0))
 
 /* Nonzero means print parse trace.  It is left uninitialized so that
@@ -1112,18 +1086,16 @@ yysyntax_error (char *yyresult, int yystate, int yychar)
 #if (defined __STDC__ || defined __C99__FUNC__ \
      || defined __cplusplus || defined _MSC_VER)
 static void
-yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep, YYLTYPE *yylocationp)
+yydestruct (const char *yymsg, int yytype, YYSTYPE *yyvaluep)
 #else
 static void
-yydestruct (yymsg, yytype, yyvaluep, yylocationp)
+yydestruct (yymsg, yytype, yyvaluep)
     const char *yymsg;
     int yytype;
     YYSTYPE *yyvaluep;
-    YYLTYPE *yylocationp;
 #endif
 {
   YYUSE (yyvaluep);
-  YYUSE (yylocationp);
 
   if (!yymsg)
     yymsg = "Deleting";
@@ -1155,23 +1127,20 @@ int yyparse ();
 #endif /* ! YYPARSE_PARAM */
 
 
-
-/* The look-ahead symbol.  */
+/* The lookahead symbol.  */
 int yychar;
 
-/* The semantic value of the look-ahead symbol.  */
+/* The semantic value of the lookahead symbol.  */
 YYSTYPE yylval;
 
 /* Number of syntax errors so far.  */
 int yynerrs;
-/* Location data for the look-ahead symbol.  */
-YYLTYPE yylloc;
 
 
 
-/*----------.
-| yyparse.  |
-`----------*/
+/*-------------------------.
+| yyparse or yypush_parse.  |
+`-------------------------*/
 
 #ifdef YYPARSE_PARAM
 #if (defined __STDC__ || defined __C99__FUNC__ \
@@ -1195,79 +1164,70 @@ yyparse ()
 #endif
 #endif
 {
-  
-  int yystate;
-  int yyn;
-  int yyresult;
-  /* Number of tokens to shift before error messages enabled.  */
-  int yyerrstatus;
-  /* Look-ahead token as an internal (translated) token number.  */
-  int yytoken = 0;
-#if YYERROR_VERBOSE
-  /* Buffer for error messages, and its allocated size.  */
-  char yymsgbuf[128];
-  char *yymsg = yymsgbuf;
-  YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
-#endif
 
-  /* Three stacks and their tools:
-     `yyss': related to states,
-     `yyvs': related to semantic values,
-     `yyls': related to locations.
 
-     Refer to the stacks thru separate pointers, to allow yyoverflow
-     to reallocate them elsewhere.  */
+    int yystate;
+    /* Number of tokens to shift before error messages enabled.  */
+    int yyerrstatus;
 
-  /* The state stack.  */
-  yytype_int16 yyssa[YYINITDEPTH];
-  yytype_int16 *yyss = yyssa;
-  yytype_int16 *yyssp;
+    /* The stacks and their tools:
+       `yyss': related to states.
+       `yyvs': related to semantic values.
 
-  /* The semantic value stack.  */
-  YYSTYPE yyvsa[YYINITDEPTH];
-  YYSTYPE *yyvs = yyvsa;
-  YYSTYPE *yyvsp;
+       Refer to the stacks thru separate pointers, to allow yyoverflow
+       to reallocate them elsewhere.  */
 
-  /* The location stack.  */
-  YYLTYPE yylsa[YYINITDEPTH];
-  YYLTYPE *yyls = yylsa;
-  YYLTYPE *yylsp;
-  /* The locations where the error started and ended.  */
-  YYLTYPE yyerror_range[2];
+    /* The state stack.  */
+    yytype_int16 yyssa[YYINITDEPTH];
+    yytype_int16 *yyss;
+    yytype_int16 *yyssp;
 
-#define YYPOPSTACK(N)   (yyvsp -= (N), yyssp -= (N), yylsp -= (N))
+    /* The semantic value stack.  */
+    YYSTYPE yyvsa[YYINITDEPTH];
+    YYSTYPE *yyvs;
+    YYSTYPE *yyvsp;
 
-  YYSIZE_T yystacksize = YYINITDEPTH;
+    YYSIZE_T yystacksize;
 
+  int yyn;
+  int yyresult;
+  /* Lookahead token as an internal (translated) token number.  */
+  int yytoken;
   /* The variables used to return semantic value and location from the
      action routines.  */
   YYSTYPE yyval;
-  YYLTYPE yyloc;
+
+#if YYERROR_VERBOSE
+  /* Buffer for error messages, and its allocated size.  */
+  char yymsgbuf[128];
+  char *yymsg = yymsgbuf;
+  YYSIZE_T yymsg_alloc = sizeof yymsgbuf;
+#endif
+
+#define YYPOPSTACK(N)   (yyvsp -= (N), yyssp -= (N))
 
   /* The number of symbols on the RHS of the reduced rule.
      Keep to zero when no symbol should be popped.  */
   int yylen = 0;
 
+  yytoken = 0;
+  yyss = yyssa;
+  yyvs = yyvsa;
+  yystacksize = YYINITDEPTH;
+
   YYDPRINTF ((stderr, "Starting parse\n"));
 
   yystate = 0;
   yyerrstatus = 0;
   yynerrs = 0;
-  yychar = YYEMPTY;		/* Cause a token to be read.  */
+  yychar = YYEMPTY; /* Cause a token to be read.  */
 
   /* Initialize stack pointers.
      Waste one element of value and location stack
      so that they stay on the same level as the state stack.
      The wasted elements are never initialized.  */
-
   yyssp = yyss;
   yyvsp = yyvs;
-  yylsp = yyls;
-#if YYLTYPE_IS_TRIVIAL
-  /* Initialize the default location before parsing starts.  */
-  yylloc.first_line   = yylloc.last_line   = 1;
-  yylloc.first_column = yylloc.last_column = 0;
-#endif
 
   goto yysetstate;
 
@@ -1294,7 +1254,6 @@ yyparse ()
 	   memory.  */
 	YYSTYPE *yyvs1 = yyvs;
 	yytype_int16 *yyss1 = yyss;
-	YYLTYPE *yyls1 = yyls;
 
 	/* Each stack pointer address is followed by the size of the
 	   data in use in that stack, in bytes.  This used to be a
@@ -1303,9 +1262,8 @@ yyparse ()
 	yyoverflow (YY_("memory exhausted"),
 		    &yyss1, yysize * sizeof (*yyssp),
 		    &yyvs1, yysize * sizeof (*yyvsp),
-		    &yyls1, yysize * sizeof (*yylsp),
 		    &yystacksize);
-	yyls = yyls1;
+
 	yyss = yyss1;
 	yyvs = yyvs1;
       }
@@ -1326,9 +1284,8 @@ yyparse ()
 	  (union yyalloc *) YYSTACK_ALLOC (YYSTACK_BYTES (yystacksize));
 	if (! yyptr)
 	  goto yyexhaustedlab;
-	YYSTACK_RELOCATE (yyss);
-	YYSTACK_RELOCATE (yyvs);
-	YYSTACK_RELOCATE (yyls);
+	YYSTACK_RELOCATE (yyss_alloc, yyss);
+	YYSTACK_RELOCATE (yyvs_alloc, yyvs);
 #  undef YYSTACK_RELOCATE
 	if (yyss1 != yyssa)
 	  YYSTACK_FREE (yyss1);
@@ -1338,7 +1295,6 @@ yyparse ()
 
       yyssp = yyss + yysize - 1;
       yyvsp = yyvs + yysize - 1;
-      yylsp = yyls + yysize - 1;
 
       YYDPRINTF ((stderr, "Stack size increased to %lu\n",
 		  (unsigned long int) yystacksize));
@@ -1349,6 +1305,9 @@ yyparse ()
 
   YYDPRINTF ((stderr, "Entering state %d\n", yystate));
 
+  if (yystate == YYFINAL)
+    YYACCEPT;
+
   goto yybackup;
 
 /*-----------.
@@ -1357,16 +1316,16 @@ yyparse ()
 yybackup:
 
   /* Do appropriate processing given the current state.  Read a
-     look-ahead token if we need one and don't already have one.  */
+     lookahead token if we need one and don't already have one.  */
 
-  /* First try to decide what to do without reference to look-ahead token.  */
+  /* First try to decide what to do without reference to lookahead token.  */
   yyn = yypact[yystate];
   if (yyn == YYPACT_NINF)
     goto yydefault;
 
-  /* Not known => get a look-ahead token if don't already have one.  */
+  /* Not known => get a lookahead token if don't already have one.  */
 
-  /* YYCHAR is either YYEMPTY or YYEOF or a valid look-ahead symbol.  */
+  /* YYCHAR is either YYEMPTY or YYEOF or a valid lookahead symbol.  */
   if (yychar == YYEMPTY)
     {
       YYDPRINTF ((stderr, "Reading a token: "));
@@ -1398,24 +1357,20 @@ yybackup:
       goto yyreduce;
     }
 
-  if (yyn == YYFINAL)
-    YYACCEPT;
-
   /* Count tokens shifted since error; after three, turn off error
      status.  */
   if (yyerrstatus)
     yyerrstatus--;
 
-  /* Shift the look-ahead token.  */
+  /* Shift the lookahead token.  */
   YY_SYMBOL_PRINT ("Shifting", yytoken, &yylval, &yylloc);
 
-  /* Discard the shifted token unless it is eof.  */
-  if (yychar != YYEOF)
-    yychar = YYEMPTY;
+  /* Discard the shifted token.  */
+  yychar = YYEMPTY;
 
   yystate = yyn;
   *++yyvsp = yylval;
-  *++yylsp = yylloc;
+
   goto yynewstate;
 
 
@@ -1446,337 +1401,387 @@ yyreduce:
      GCC warning that YYVAL may be used uninitialized.  */
   yyval = yyvsp[1-yylen];
 
-  /* Default location.  */
-  YYLLOC_DEFAULT (yyloc, (yylsp - yylen), yylen);
+
   YY_REDUCE_PRINT (yyn);
   switch (yyn)
     {
         case 2:
-#line 90 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 87 "dtc-parser.y"
     {
-			the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node), 0);
+			the_boot_info = build_boot_info((yyvsp[(3) - (4)].re), (yyvsp[(4) - (4)].node),
+							guess_boot_cpuid((yyvsp[(4) - (4)].node)));
 		;}
     break;
 
   case 3:
-#line 94 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 95 "dtc-parser.y"
     {
-			the_boot_info = build_boot_info((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].node), 0);
+			(yyval.re) = NULL;
 		;}
     break;
 
   case 4:
-#line 101 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 99 "dtc-parser.y"
     {
-			(yyval.re) = NULL;
+			(yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
 		;}
     break;
 
   case 5:
-#line 105 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 106 "dtc-parser.y"
     {
-			(yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+			(yyval.re) = build_reserve_entry((yyvsp[(2) - (4)].addr), (yyvsp[(3) - (4)].addr));
 		;}
     break;
 
   case 6:
-#line 112 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 110 "dtc-parser.y"
     {
-			(yyval.re) = build_reserve_entry((yyvsp[(3) - (5)].addr), (yyvsp[(4) - (5)].addr), (yyvsp[(1) - (5)].labelref));
+			add_label(&(yyvsp[(2) - (2)].re)->labels, (yyvsp[(1) - (2)].labelref));
+			(yyval.re) = (yyvsp[(2) - (2)].re);
 		;}
     break;
 
   case 7:
-#line 119 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 118 "dtc-parser.y"
     {
-			(yyval.re) = NULL;
+			(yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
 		;}
     break;
 
   case 8:
-#line 123 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 125 "dtc-parser.y"
     {
-			(yyval.re) = chain_reserve_entry((yyvsp[(1) - (2)].re), (yyvsp[(2) - (2)].re));
+			(yyval.node) = name_node((yyvsp[(2) - (2)].node), "");
 		;}
     break;
 
   case 9:
-#line 130 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 129 "dtc-parser.y"
     {
-			(yyval.re) = (yyvsp[(1) - (1)].re);
+			(yyval.node) = merge_nodes((yyvsp[(1) - (3)].node), (yyvsp[(3) - (3)].node));
 		;}
     break;
 
   case 10:
-#line 134 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 133 "dtc-parser.y"
     {
-			(yyval.re) = build_reserve_entry((yyvsp[(3) - (6)].addr), (yyvsp[(5) - (6)].addr) - (yyvsp[(3) - (6)].addr) + 1, (yyvsp[(1) - (6)].labelref));
+			struct node *target = get_node_by_ref((yyvsp[(1) - (3)].node), (yyvsp[(2) - (3)].labelref));
+
+			if (target)
+				merge_nodes(target, (yyvsp[(3) - (3)].node));
+			else
+				print_error("label or path, '%s', not found", (yyvsp[(2) - (3)].labelref));
+			(yyval.node) = (yyvsp[(1) - (3)].node);
 		;}
     break;
 
   case 11:
-#line 141 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 146 "dtc-parser.y"
     {
-			(yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 0, 64);
+			(yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
 		;}
     break;
 
   case 12:
-#line 145 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 153 "dtc-parser.y"
     {
-			(yyval.addr) = eval_literal((yyvsp[(1) - (1)].literal), 16, 64);
+			(yyval.proplist) = NULL;
 		;}
     break;
 
   case 13:
-#line 152 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 157 "dtc-parser.y"
     {
-			(yyval.node) = name_node((yyvsp[(2) - (2)].node), "", NULL);
+			(yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
 		;}
     break;
 
   case 14:
-#line 159 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 164 "dtc-parser.y"
     {
-			(yyval.node) = build_node((yyvsp[(2) - (5)].proplist), (yyvsp[(3) - (5)].nodelist));
+			(yyval.prop) = build_property((yyvsp[(1) - (4)].propnodename), (yyvsp[(3) - (4)].data));
 		;}
     break;
 
   case 15:
-#line 166 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 168 "dtc-parser.y"
     {
-			(yyval.proplist) = NULL;
+			(yyval.prop) = build_property((yyvsp[(1) - (2)].propnodename), empty_data);
 		;}
     break;
 
   case 16:
-#line 170 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 172 "dtc-parser.y"
     {
-			(yyval.proplist) = chain_property((yyvsp[(2) - (2)].prop), (yyvsp[(1) - (2)].proplist));
+			add_label(&(yyvsp[(2) - (2)].prop)->labels, (yyvsp[(1) - (2)].labelref));
+			(yyval.prop) = (yyvsp[(2) - (2)].prop);
 		;}
     break;
 
   case 17:
-#line 177 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 180 "dtc-parser.y"
     {
-			(yyval.prop) = build_property((yyvsp[(2) - (5)].propnodename), (yyvsp[(4) - (5)].data), (yyvsp[(1) - (5)].labelref));
+			(yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
 		;}
     break;
 
   case 18:
-#line 181 "dtc-parser.y"
+
+/* Line 1455 of yacc.c  */
+#line 184 "dtc-parser.y"
     {
-			(yyval.prop) = build_property((yyvsp[(2) - (3)].propnodename), empty_data, (yyvsp[(1) - (3)].labelref));
+			(yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
 		;}
     break;
 
   case 19:
+
+/* Line 1455 of yacc.c  */
 #line 188 "dtc-parser.y"
     {
-			(yyval.data) = data_merge((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].data));
+			(yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
 		;}
     break;
 
   case 20:
+
+/* Line 1455 of yacc.c  */
 #line 192 "dtc-parser.y"
     {
-			(yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
+			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
   case 21:
-#line 196 "dtc-parser.y"
-    {
-			(yyval.data) = data_merge((yyvsp[(1) - (4)].data), (yyvsp[(3) - (4)].data));
-		;}
-    break;
 
-  case 22:
-#line 200 "dtc-parser.y"
-    {
-			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), REF_PATH, (yyvsp[(2) - (2)].labelref));
-		;}
-    break;
-
-  case 23:
-#line 204 "dtc-parser.y"
+/* Line 1455 of yacc.c  */
+#line 196 "dtc-parser.y"
     {
-			struct search_path path = { srcpos_file->dir, NULL, NULL };
-			struct dtc_file *file = dtc_open_file((yyvsp[(4) - (9)].data).val, &path);
-			struct data d = empty_data;
+			FILE *f = srcfile_relative_open((yyvsp[(4) - (9)].data).val, NULL);
+			struct data d;
 
 			if ((yyvsp[(6) - (9)].addr) != 0)
-				if (fseek(file->file, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
-					yyerrorf("Couldn't seek to offset %llu in \"%s\": %s",
-						 (unsigned long long)(yyvsp[(6) - (9)].addr),
-						 (yyvsp[(4) - (9)].data).val, strerror(errno));
+				if (fseek(f, (yyvsp[(6) - (9)].addr), SEEK_SET) != 0)
+					print_error("Couldn't seek to offset %llu in \"%s\": %s",
+						     (unsigned long long)(yyvsp[(6) - (9)].addr),
+						     (yyvsp[(4) - (9)].data).val,
+						     strerror(errno));
 
-			d = data_copy_file(file->file, (yyvsp[(8) - (9)].addr));
+			d = data_copy_file(f, (yyvsp[(8) - (9)].addr));
 
 			(yyval.data) = data_merge((yyvsp[(1) - (9)].data), d);
-			dtc_close_file(file);
+			fclose(f);
 		;}
     break;
 
-  case 24:
-#line 221 "dtc-parser.y"
+  case 22:
+
+/* Line 1455 of yacc.c  */
+#line 213 "dtc-parser.y"
     {
-			struct search_path path = { srcpos_file->dir, NULL, NULL };
-			struct dtc_file *file = dtc_open_file((yyvsp[(4) - (5)].data).val, &path);
+			FILE *f = srcfile_relative_open((yyvsp[(4) - (5)].data).val, NULL);
 			struct data d = empty_data;
 
-			d = data_copy_file(file->file, -1);
+			d = data_copy_file(f, -1);
 
 			(yyval.data) = data_merge((yyvsp[(1) - (5)].data), d);
-			dtc_close_file(file);
+			fclose(f);
 		;}
     break;
 
-  case 25:
-#line 232 "dtc-parser.y"
+  case 23:
+
+/* Line 1455 of yacc.c  */
+#line 223 "dtc-parser.y"
     {
 			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
-  case 26:
-#line 239 "dtc-parser.y"
+  case 24:
+
+/* Line 1455 of yacc.c  */
+#line 230 "dtc-parser.y"
     {
 			(yyval.data) = empty_data;
 		;}
     break;
 
-  case 27:
-#line 243 "dtc-parser.y"
+  case 25:
+
+/* Line 1455 of yacc.c  */
+#line 234 "dtc-parser.y"
     {
 			(yyval.data) = (yyvsp[(1) - (2)].data);
 		;}
     break;
 
-  case 28:
-#line 247 "dtc-parser.y"
+  case 26:
+
+/* Line 1455 of yacc.c  */
+#line 238 "dtc-parser.y"
     {
 			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
-  case 29:
-#line 254 "dtc-parser.y"
+  case 27:
+
+/* Line 1455 of yacc.c  */
+#line 245 "dtc-parser.y"
     {
 			(yyval.data) = empty_data;
 		;}
     break;
 
-  case 30:
-#line 258 "dtc-parser.y"
+  case 28:
+
+/* Line 1455 of yacc.c  */
+#line 249 "dtc-parser.y"
     {
 			(yyval.data) = data_append_cell((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].cell));
 		;}
     break;
 
-  case 31:
-#line 262 "dtc-parser.y"
+  case 29:
+
+/* Line 1455 of yacc.c  */
+#line 253 "dtc-parser.y"
     {
 			(yyval.data) = data_append_cell(data_add_marker((yyvsp[(1) - (2)].data), REF_PHANDLE,
 							      (yyvsp[(2) - (2)].labelref)), -1);
 		;}
     break;
 
-  case 32:
-#line 267 "dtc-parser.y"
+  case 30:
+
+/* Line 1455 of yacc.c  */
+#line 258 "dtc-parser.y"
     {
 			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
-  case 33:
-#line 274 "dtc-parser.y"
-    {
-			(yyval.cbase) = 16;
-		;}
-    break;
+  case 31:
 
-  case 35:
-#line 282 "dtc-parser.y"
+/* Line 1455 of yacc.c  */
+#line 265 "dtc-parser.y"
     {
 			(yyval.cell) = eval_literal((yyvsp[(1) - (1)].literal), 0, 32);
 		;}
     break;
 
-  case 36:
-#line 286 "dtc-parser.y"
-    {
-			(yyval.cell) = eval_literal((yyvsp[(2) - (2)].literal), (yyvsp[(1) - (2)].cbase), 32);
-		;}
-    break;
+  case 32:
 
-  case 37:
-#line 293 "dtc-parser.y"
+/* Line 1455 of yacc.c  */
+#line 272 "dtc-parser.y"
     {
 			(yyval.data) = empty_data;
 		;}
     break;
 
-  case 38:
-#line 297 "dtc-parser.y"
+  case 33:
+
+/* Line 1455 of yacc.c  */
+#line 276 "dtc-parser.y"
     {
 			(yyval.data) = data_append_byte((yyvsp[(1) - (2)].data), (yyvsp[(2) - (2)].byte));
 		;}
     break;
 
-  case 39:
-#line 301 "dtc-parser.y"
+  case 34:
+
+/* Line 1455 of yacc.c  */
+#line 280 "dtc-parser.y"
     {
 			(yyval.data) = data_add_marker((yyvsp[(1) - (2)].data), LABEL, (yyvsp[(2) - (2)].labelref));
 		;}
     break;
 
-  case 40:
-#line 308 "dtc-parser.y"
+  case 35:
+
+/* Line 1455 of yacc.c  */
+#line 287 "dtc-parser.y"
     {
 			(yyval.nodelist) = NULL;
 		;}
     break;
 
-  case 41:
-#line 312 "dtc-parser.y"
+  case 36:
+
+/* Line 1455 of yacc.c  */
+#line 291 "dtc-parser.y"
     {
 			(yyval.nodelist) = chain_node((yyvsp[(1) - (2)].node), (yyvsp[(2) - (2)].nodelist));
 		;}
     break;
 
-  case 42:
-#line 316 "dtc-parser.y"
+  case 37:
+
+/* Line 1455 of yacc.c  */
+#line 295 "dtc-parser.y"
     {
-			yyerror("syntax error: properties must precede subnodes");
+			print_error("syntax error: properties must precede subnodes");
 			YYERROR;
 		;}
     break;
 
-  case 43:
-#line 324 "dtc-parser.y"
-    {
-			(yyval.node) = name_node((yyvsp[(3) - (3)].node), (yyvsp[(2) - (3)].propnodename), (yyvsp[(1) - (3)].labelref));
-		;}
-    break;
+  case 38:
 
-  case 44:
-#line 331 "dtc-parser.y"
+/* Line 1455 of yacc.c  */
+#line 303 "dtc-parser.y"
     {
-			(yyval.labelref) = NULL;
+			(yyval.node) = name_node((yyvsp[(2) - (2)].node), (yyvsp[(1) - (2)].propnodename));
 		;}
     break;
 
-  case 45:
-#line 335 "dtc-parser.y"
+  case 39:
+
+/* Line 1455 of yacc.c  */
+#line 307 "dtc-parser.y"
     {
-			(yyval.labelref) = (yyvsp[(1) - (1)].labelref);
+			add_label(&(yyvsp[(2) - (2)].node)->labels, (yyvsp[(1) - (2)].labelref));
+			(yyval.node) = (yyvsp[(2) - (2)].node);
 		;}
     break;
 
 
-/* Line 1267 of yacc.c.  */
-#line 1780 "dtc-parser.tab.c"
+
+/* Line 1455 of yacc.c  */
+#line 1783 "dtc-parser.tab.c"
       default: break;
     }
   YY_SYMBOL_PRINT ("-> $$ =", yyr1[yyn], &yyval, &yyloc);
@@ -1786,7 +1791,6 @@ yyreduce:
   YY_STACK_PRINT (yyss, yyssp);
 
   *++yyvsp = yyval;
-  *++yylsp = yyloc;
 
   /* Now `shift' the result of the reduction.  Determine what state
      that goes to, based on the state we popped back to and the rule
@@ -1848,11 +1852,11 @@ yyerrlab:
 #endif
     }
 
-  yyerror_range[0] = yylloc;
+
 
   if (yyerrstatus == 3)
     {
-      /* If just tried and failed to reuse look-ahead token after an
+      /* If just tried and failed to reuse lookahead token after an
 	 error, discard it.  */
 
       if (yychar <= YYEOF)
@@ -1864,12 +1868,12 @@ yyerrlab:
       else
 	{
 	  yydestruct ("Error: discarding",
-		      yytoken, &yylval, &yylloc);
+		      yytoken, &yylval);
 	  yychar = YYEMPTY;
 	}
     }
 
-  /* Else will try to reuse look-ahead token after shifting the error
+  /* Else will try to reuse lookahead token after shifting the error
      token.  */
   goto yyerrlab1;
 
@@ -1885,7 +1889,6 @@ yyerrorlab:
   if (/*CONSTCOND*/ 0)
      goto yyerrorlab;
 
-  yyerror_range[0] = yylsp[1-yylen];
   /* Do not reclaim the symbols of the rule which action triggered
      this YYERROR.  */
   YYPOPSTACK (yylen);
@@ -1919,24 +1922,16 @@ yyerrlab1:
       if (yyssp == yyss)
 	YYABORT;
 
-      yyerror_range[0] = *yylsp;
+
       yydestruct ("Error: popping",
-		  yystos[yystate], yyvsp, yylsp);
+		  yystos[yystate], yyvsp);
       YYPOPSTACK (1);
       yystate = *yyssp;
       YY_STACK_PRINT (yyss, yyssp);
     }
 
-  if (yyn == YYFINAL)
-    YYACCEPT;
-
   *++yyvsp = yylval;
 
-  yyerror_range[1] = yylloc;
-  /* Using YYLLOC is tempting, but would change the location of
-     the look-ahead.  YYLOC is available though.  */
-  YYLLOC_DEFAULT (yyloc, (yyerror_range - 1), 2);
-  *++yylsp = yyloc;
 
   /* Shift the error token.  */
   YY_SYMBOL_PRINT ("Shifting", yystos[yyn], yyvsp, yylsp);
@@ -1959,7 +1954,7 @@ yyabortlab:
   yyresult = 1;
   goto yyreturn;
 
-#ifndef yyoverflow
+#if !defined(yyoverflow) || YYERROR_VERBOSE
 /*-------------------------------------------------.
 | yyexhaustedlab -- memory exhaustion comes here.  |
 `-------------------------------------------------*/
@@ -1970,9 +1965,9 @@ yyexhaustedlab:
 #endif
 
 yyreturn:
-  if (yychar != YYEOF && yychar != YYEMPTY)
+  if (yychar != YYEMPTY)
      yydestruct ("Cleanup: discarding lookahead",
-		 yytoken, &yylval, &yylloc);
+		 yytoken, &yylval);
   /* Do not reclaim the symbols of the rule which action triggered
      this YYABORT or YYACCEPT.  */
   YYPOPSTACK (yylen);
@@ -1980,7 +1975,7 @@ yyreturn:
   while (yyssp != yyss)
     {
       yydestruct ("Cleanup: popping",
-		  yystos[*yyssp], yyvsp, yylsp);
+		  yystos[*yyssp], yyvsp);
       YYPOPSTACK (1);
     }
 #ifndef yyoverflow
@@ -1996,29 +1991,24 @@ yyreturn:
 }
 
 
-#line 340 "dtc-parser.y"
+
+/* Line 1675 of yacc.c  */
+#line 313 "dtc-parser.y"
 
 
-void yyerrorf(char const *s, ...)
+void print_error(char const *fmt, ...)
 {
-	const char *fname = srcpos_file ? srcpos_file->name : "<no-file>";
 	va_list va;
-	va_start(va, s);
-
-	if (strcmp(fname, "-") == 0)
-		fname = "stdin";
 
-	fprintf(stderr, "%s:%d ", fname, yylloc.first_line);
-	vfprintf(stderr, s, va);
-	fprintf(stderr, "\n");
+	va_start(va, fmt);
+	srcpos_verror(&yylloc, fmt, va);
+	va_end(va);
 
 	treesource_error = 1;
-	va_end(va);
 }
 
-void yyerror (char const *s)
-{
-	yyerrorf("%s", s);
+void yyerror(char const *s) {
+	print_error("%s", s);
 }
 
 static unsigned long long eval_literal(const char *s, int base, int bits)
@@ -2029,12 +2019,12 @@ static unsigned long long eval_literal(const char *s, int base, int bits)
 	errno = 0;
 	val = strtoull(s, &e, base);
 	if (*e)
-		yyerror("bad characters in literal");
+		print_error("bad characters in literal");
 	else if ((errno == ERANGE)
 		 || ((bits < 64) && (val >= (1ULL << bits))))
-		yyerror("literal out of range");
+		print_error("literal out of range");
 	else if (errno != 0)
-		yyerror("bad literal");
+		print_error("bad literal");
 	return val;
 }
 
scripts/dtc/dtc-parser.tab.h_shipped +30 -52
index ba99100..95c9547 100644
@@ -1,24 +1,23 @@
-/* A Bison parser, made by GNU Bison 2.3.  */
 
-/* Skeleton interface for Bison's Yacc-like parsers in C
+/* A Bison parser, made by GNU Bison 2.4.1.  */
 
-   Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
+/* Skeleton interface for Bison's Yacc-like parsers in C
+   
+      Copyright (C) 1984, 1989, 1990, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    Free Software Foundation, Inc.
-
-   This program is free software; you can redistribute it and/or modify
+   
+   This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
-   the Free Software Foundation; either version 2, or (at your option)
-   any later version.
-
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+   
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.
-
+   
    You should have received a copy of the GNU General Public License
-   along with this program; if not, write to the Free Software
-   Foundation, Inc., 51 Franklin Street, Fifth Floor,
-   Boston, MA 02110-1301, USA.  */
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 /* As a special exception, you may create a larger work that contains
    part or all of the Bison parser skeleton and distribute that work
@@ -29,10 +28,11 @@
    special exception, which will cause the skeleton and the resulting
    Bison output files to be licensed under the GNU General Public
    License without this special exception.
-
+   
    This special exception was added by the Free Software Foundation in
    version 2.2 of Bison.  */
 
+
 /* Tokens.  */
 #ifndef YYTOKENTYPE
 # define YYTOKENTYPE
@@ -43,35 +43,24 @@
      DT_MEMRESERVE = 259,
      DT_PROPNODENAME = 260,
      DT_LITERAL = 261,
-     DT_LEGACYLITERAL = 262,
-     DT_BASE = 263,
-     DT_BYTE = 264,
-     DT_STRING = 265,
-     DT_LABEL = 266,
-     DT_REF = 267,
-     DT_INCBIN = 268
+     DT_BASE = 262,
+     DT_BYTE = 263,
+     DT_STRING = 264,
+     DT_LABEL = 265,
+     DT_REF = 266,
+     DT_INCBIN = 267
    };
 #endif
-/* Tokens.  */
-#define DT_V1 258
-#define DT_MEMRESERVE 259
-#define DT_PROPNODENAME 260
-#define DT_LITERAL 261
-#define DT_LEGACYLITERAL 262
-#define DT_BASE 263
-#define DT_BYTE 264
-#define DT_STRING 265
-#define DT_LABEL 266
-#define DT_REF 267
-#define DT_INCBIN 268
-
 
 
 
 #if ! defined YYSTYPE && ! defined YYSTYPE_IS_DECLARED
 typedef union YYSTYPE
-#line 37 "dtc-parser.y"
 {
+
+/* Line 1676 of yacc.c  */
+#line 39 "dtc-parser.y"
+
 	char *propnodename;
 	char *literal;
 	char *labelref;
@@ -86,28 +75,17 @@ typedef union YYSTYPE
 	struct node *node;
 	struct node *nodelist;
 	struct reserve_info *re;
-}
-/* Line 1489 of yacc.c.  */
-#line 92 "dtc-parser.tab.h"
-	YYSTYPE;
+
+
+
+/* Line 1676 of yacc.c  */
+#line 83 "dtc-parser.tab.h"
+} YYSTYPE;
+# define YYSTYPE_IS_TRIVIAL 1
 # define yystype YYSTYPE /* obsolescent; will be withdrawn */
 # define YYSTYPE_IS_DECLARED 1
-# define YYSTYPE_IS_TRIVIAL 1
 #endif
 
 extern YYSTYPE yylval;
 
-#if ! defined YYLTYPE && ! defined YYLTYPE_IS_DECLARED
-typedef struct YYLTYPE
-{
-  int first_line;
-  int first_column;
-  int last_line;
-  int last_column;
-} YYLTYPE;
-# define yyltype YYLTYPE /* obsolescent; will be withdrawn */
-# define YYLTYPE_IS_DECLARED 1
-# define YYLTYPE_IS_TRIVIAL 1
-#endif
 
-extern YYLTYPE yylloc;
scripts/dtc/dtc-parser.y +63 -97
index b2ab562..5e84a67 100644
@@ -18,15 +18,17 @@
  *                                                                   USA
  */
 
-%locations
-
 %{
 #include <stdio.h>
[… more lines in the raw message]

Lines of this file are not shown. View the raw message.

scripts/dtc/dtc.c +31 -26
index d8fd43b..cbc0193 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/dtc.h +38 -39
index 08d54c8..f37c97e 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/flattree.c +109 -83
index 76acd28..ead0332 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/fstree.c +5 -7
index 8fe1bdf..f377453 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/livetree.c +323 -22
index 0ca3de5..c9209d5 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/srcpos.c +195 -63
index 9641b76..2dbc874 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/srcpos.h +50 -49
index e17c7c0..bd7966e 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/treesource.c +26 -22
index 1521ff1..c09aafa 100644

Lines of this file are not shown. View the raw message.

scripts/dtc/util.h new file +56 -0
new file mode 100644
index 0000000..9cead84

Lines of this file are not shown. View the raw message.

The rest of this diff is not shown. View the raw message.

Part of the diff is not shown here. View the raw message.

#3 lore raw

PATCH 2/5 powerpc/5200: dts: rename nodes to prepare for refactoring dts files

In reply to John Bonesio

This patch renames nodes in dts fils for MPC5200b files to prepare for refactoring of these files later. When refactoring it will be easier to verify the results if the node names aren't changing at the same time.

---

 arch/powerpc/boot/dts/cm5200.dts    |    8 ++++----
 arch/powerpc/boot/dts/digsy_mtc.dts |    6 +++---
 arch/powerpc/boot/dts/lite5200b.dts |    2 +-
 arch/powerpc/boot/dts/media5200.dts |    2 +-
 arch/powerpc/boot/dts/motionpro.dts |   10 +++++-----
 arch/powerpc/boot/dts/mucmc52.dts   |    6 +++---
 arch/powerpc/boot/dts/pcm030.dts    |    6 +++---
 arch/powerpc/boot/dts/pcm032.dts    |    6 +++---
 arch/powerpc/boot/dts/uc101.dts     |    6 +++---
 9 files changed, 26 insertions(+), 26 deletions(-)
arch/powerpc/boot/dts/cm5200.dts +4 -4
index dd38608..9369dcd 100644
@@ -160,25 +160,25 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 {		// PSC2
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2400 {		// PSC3
+		psc@2400 {		// PSC3
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2400 0x100>;
 			interrupts = <2 3 0>;
 		};
 
-		serial@2c00 {		// PSC6
+		psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
arch/powerpc/boot/dts/digsy_mtc.dts +3 -3
index 8e9be6b..f0592de 100644
@@ -155,13 +155,13 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2600 {		// PSC4
+		psc@2600 {		// PSC4
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2600 0x100>;
 			interrupts = <2 11 0>;
 		};
 
-		serial@2800 {		// PSC5
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2800 0x100>;
 			interrupts = <2 12 0>;
@@ -217,7 +217,7 @@
 		};
 	};
 
-	lpb {
+	localbus {
 		compatible = "fsl,mpc5200b-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
arch/powerpc/boot/dts/lite5200b.dts +1 -1
index 59702ac..a74b790 100644
@@ -172,7 +172,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
arch/powerpc/boot/dts/media5200.dts +1 -1
index 0c3902b..a70ef68 100644
@@ -183,7 +183,7 @@
 		};
 
 		// PSC6 in uart mode
-		console: serial@2c00 {		// PSC6
+		console: psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			port-number = <0>;  // Logical port assignment
arch/powerpc/boot/dts/motionpro.dts +5 -5
index 6ca4fc1..f6261ea 100644
@@ -100,7 +100,7 @@
 			interrupts = <1 14 0>;
 		};
 
-		motionpro-led@660 {	// Motion-PRO status LED
+		timer@660 {	// Motion-PRO status LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-statusled";
 			reg = <0x660 0x10>;
@@ -108,7 +108,7 @@
 			blink-delay = <100>; // 100 msec
 		};
 
-		motionpro-led@670 {	// Motion-PRO ready LED
+		timer@670 {	// Motion-PRO ready LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-readyled";
 			reg = <0x670 0x10>;
@@ -169,14 +169,14 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
 		// PSC2 in spi master mode 
-		spi@2200 {		// PSC2
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 			cell-index = <1>;
 			reg = <0x2200 0x100>;
@@ -184,7 +184,7 @@
 		};
 
 		// PSC5 in uart mode
-		serial@2800 {		// PSC5
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2800 0x100>;
 			interrupts = <2 12 0>;
arch/powerpc/boot/dts/mucmc52.dts +3 -3
index b72a758..8dc212d 100644
@@ -126,19 +126,19 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		psc@2000 { /* PSC1 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 { /* PSC2 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
arch/powerpc/boot/dts/pcm030.dts +3 -3
index 8a4ec30..3a4f554 100644
@@ -185,7 +185,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		ac97@2000 { /* PSC1 in ac97 mode */
+		psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
 
 		/* PSC2 port is used by CAN1/2 */
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <2>;
 			reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
 
 		/* PSC5 is ??? */
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			reg = <0x2c00 0x100>;
arch/powerpc/boot/dts/pcm032.dts +3 -3
index 85d857a..17596c7 100644
@@ -185,7 +185,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		ac97@2000 {	/* PSC1 is ac97 */
+		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
 
 		/* PSC2 port is used by CAN1/2 */
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <2>;
 			reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
 
 		/* PSC5 is ??? */
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			reg = <0x2c00 0x100>;
arch/powerpc/boot/dts/uc101.dts +3 -3
index 019264c..e00441a 100644
@@ -158,19 +158,19 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		psc@2000 { /* PSC1 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 { /* PSC2 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 {		/* PSC6 in UART mode */
+		psc@2c00 {		/* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
Applied
#4 lore raw

Re: [PATCH 2/5] powerpc/5200: dts: rename nodes to prepare for refactoring dts files

Quoted 5 lines · John Bonesio

This patch renames nodes in dts fils for MPC5200b files to prepare for refactoring of these files later. When refactoring it will be easier to verify the results if the node names aren't changing at the same time.

Applied, thanks.

g.

Quoted 267 lines

---

 arch/powerpc/boot/dts/cm5200.dts    |    8 ++++----
 arch/powerpc/boot/dts/digsy_mtc.dts |    6 +++---
 arch/powerpc/boot/dts/lite5200b.dts |    2 +-
 arch/powerpc/boot/dts/media5200.dts |    2 +-
 arch/powerpc/boot/dts/motionpro.dts |   10 +++++-----
 arch/powerpc/boot/dts/mucmc52.dts   |    6 +++---
 arch/powerpc/boot/dts/pcm030.dts    |    6 +++---
 arch/powerpc/boot/dts/pcm032.dts    |    6 +++---
 arch/powerpc/boot/dts/uc101.dts     |    6 +++---
 9 files changed, 26 insertions(+), 26 deletions(-)
arch/powerpc/boot/dts/cm5200.dts +4 -4
index dd38608..9369dcd 100644
@@ -160,25 +160,25 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 {		// PSC2
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2400 {		// PSC3
+		psc@2400 {		// PSC3
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2400 0x100>;
 			interrupts = <2 3 0>;
 		};
 
-		serial@2c00 {		// PSC6
+		psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
arch/powerpc/boot/dts/digsy_mtc.dts +3 -3
index 8e9be6b..f0592de 100644
@@ -155,13 +155,13 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2600 {		// PSC4
+		psc@2600 {		// PSC4
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2600 0x100>;
 			interrupts = <2 11 0>;
 		};
 
-		serial@2800 {		// PSC5
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2800 0x100>;
 			interrupts = <2 12 0>;
@@ -217,7 +217,7 @@
 		};
 	};
 
-	lpb {
+	localbus {
 		compatible = "fsl,mpc5200b-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
arch/powerpc/boot/dts/lite5200b.dts +1 -1
index 59702ac..a74b790 100644
@@ -172,7 +172,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
arch/powerpc/boot/dts/media5200.dts +1 -1
index 0c3902b..a70ef68 100644
@@ -183,7 +183,7 @@
 		};
 
 		// PSC6 in uart mode
-		console: serial@2c00 {		// PSC6
+		console: psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			port-number = <0>;  // Logical port assignment
arch/powerpc/boot/dts/motionpro.dts +5 -5
index 6ca4fc1..f6261ea 100644
@@ -100,7 +100,7 @@
 			interrupts = <1 14 0>;
 		};
 
-		motionpro-led@660 {	// Motion-PRO status LED
+		timer@660 {	// Motion-PRO status LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-statusled";
 			reg = <0x660 0x10>;
@@ -108,7 +108,7 @@
 			blink-delay = <100>; // 100 msec
 		};
 
-		motionpro-led@670 {	// Motion-PRO ready LED
+		timer@670 {	// Motion-PRO ready LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-readyled";
 			reg = <0x670 0x10>;
@@ -169,14 +169,14 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 {		// PSC1
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
 		// PSC2 in spi master mode 
-		spi@2200 {		// PSC2
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 			cell-index = <1>;
 			reg = <0x2200 0x100>;
@@ -184,7 +184,7 @@
 		};
 
 		// PSC5 in uart mode
-		serial@2800 {		// PSC5
+		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2800 0x100>;
 			interrupts = <2 12 0>;
arch/powerpc/boot/dts/mucmc52.dts +3 -3
index b72a758..8dc212d 100644
@@ -126,19 +126,19 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		psc@2000 { /* PSC1 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 { /* PSC2 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
arch/powerpc/boot/dts/pcm030.dts +3 -3
index 8a4ec30..3a4f554 100644
@@ -185,7 +185,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		ac97@2000 { /* PSC1 in ac97 mode */
+		psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
 
 		/* PSC2 port is used by CAN1/2 */
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <2>;
 			reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
 
 		/* PSC5 is ??? */
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			reg = <0x2c00 0x100>;
arch/powerpc/boot/dts/pcm032.dts +3 -3
index 85d857a..17596c7 100644
@@ -185,7 +185,7 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		ac97@2000 {	/* PSC1 is ac97 */
+		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;
 			reg = <0x2000 0x100>;
@@ -194,7 +194,7 @@
 
 		/* PSC2 port is used by CAN1/2 */
 
-		serial@2400 { /* PSC3 in UART mode */
+		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <2>;
 			reg = <0x2400 0x100>;
@@ -205,7 +205,7 @@
 
 		/* PSC5 is ??? */
 
-		serial@2c00 { /* PSC6 in UART mode */
+		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			cell-index = <5>;
 			reg = <0x2c00 0x100>;
arch/powerpc/boot/dts/uc101.dts +3 -3
index 019264c..e00441a 100644
@@ -158,19 +158,19 @@
 			reg = <0x1f00 0x100>;
 		};
 
-		serial@2000 { /* PSC1 in UART mode */
+		psc@2000 { /* PSC1 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
 
-		serial@2200 { /* PSC2 in UART mode */
+		psc@2200 { /* PSC2 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2200 0x100>;
 			interrupts = <2 2 0>;
 		};
 
-		serial@2c00 {		/* PSC6 in UART mode */
+		psc@2c00 {		/* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
#5 lore raw

PATCH 3/5 powerpc/5200: dts: remove unused properties

In reply to John Bonesio

This patch remove unused properties in dts files in preparation of refactoring the dts files for MPC5200b based boards.

---

 arch/powerpc/boot/dts/cm5200.dts    |    2 --
 arch/powerpc/boot/dts/lite5200b.dts |    3 ---
 arch/powerpc/boot/dts/media5200.dts |    2 --
 arch/powerpc/boot/dts/motionpro.dts |    2 --
 arch/powerpc/boot/dts/pcm030.dts    |    2 --
 arch/powerpc/boot/dts/pcm032.dts    |    2 --
 6 files changed, 0 insertions(+), 13 deletions(-)
arch/powerpc/boot/dts/cm5200.dts +0 -2
index 9369dcd..d549897 100644
@@ -230,8 +230,6 @@
 			reg = <0 0 0x2000000>;
 			bank-width = <2>;
 			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
 		};
 	};
 };
arch/powerpc/boot/dts/lite5200b.dts +0 -3
index a74b790..c0a4e45 100644
@@ -174,7 +174,6 @@
 
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <0>;
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
@@ -198,7 +197,6 @@
 		// PSC4 in uart mode example
 		//serial@2600 {		// PSC4
 		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	cell-index = <3>;
 		//	reg = <0x2600 0x100>;
 		//	interrupts = <2 11 0>;
 		//};
@@ -206,7 +204,6 @@
 		// PSC5 in uart mode example
 		//serial@2800 {		// PSC5
 		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	cell-index = <4>;
 		//	reg = <0x2800 0x100>;
 		//	interrupts = <2 12 0>;
 		//};
arch/powerpc/boot/dts/media5200.dts +0 -2
index a70ef68..e027f45 100644
@@ -185,8 +185,6 @@
 		// PSC6 in uart mode
 		console: psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
-			port-number = <0>;  // Logical port assignment
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
 		};
arch/powerpc/boot/dts/motionpro.dts +0 -2
index f6261ea..3ab4666 100644
@@ -277,8 +277,6 @@
 			reg = <0 0 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
 		};
 	};
 };
arch/powerpc/boot/dts/pcm030.dts +0 -2
index 3a4f554..f3e30bb 100644
@@ -196,7 +196,6 @@
 
 		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <2>;
 			reg = <0x2400 0x100>;
 			interrupts = <2 3 0>;
 		};
@@ -207,7 +206,6 @@
 
 		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
 		};
arch/powerpc/boot/dts/pcm032.dts +0 -2
index 17596c7..e0f2702 100644
@@ -196,7 +196,6 @@
 
 		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <2>;
 			reg = <0x2400 0x100>;
 			interrupts = <2 3 0>;
 		};
@@ -207,7 +206,6 @@
 
 		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
 		};
Applied
#6 lore raw

Re: [PATCH 3/5] powerpc/5200: dts: remove unused properties

Quoted 4 lines · John Bonesio

This patch remove unused properties in dts files in preparation of refactoring the dts files for MPC5200b based boards.

Applied, thanks.

g.

Quoted 118 lines

---

 arch/powerpc/boot/dts/cm5200.dts    |    2 --
 arch/powerpc/boot/dts/lite5200b.dts |    3 ---
 arch/powerpc/boot/dts/media5200.dts |    2 --
 arch/powerpc/boot/dts/motionpro.dts |    2 --
 arch/powerpc/boot/dts/pcm030.dts    |    2 --
 arch/powerpc/boot/dts/pcm032.dts    |    2 --
 6 files changed, 0 insertions(+), 13 deletions(-)
arch/powerpc/boot/dts/cm5200.dts +0 -2
index 9369dcd..d549897 100644
@@ -230,8 +230,6 @@
 			reg = <0 0 0x2000000>;
 			bank-width = <2>;
 			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
 		};
 	};
 };
arch/powerpc/boot/dts/lite5200b.dts +0 -3
index a74b790..c0a4e45 100644
@@ -174,7 +174,6 @@
 
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <0>;
 			reg = <0x2000 0x100>;
 			interrupts = <2 1 0>;
 		};
@@ -198,7 +197,6 @@
 		// PSC4 in uart mode example
 		//serial@2600 {		// PSC4
 		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	cell-index = <3>;
 		//	reg = <0x2600 0x100>;
 		//	interrupts = <2 11 0>;
 		//};
@@ -206,7 +204,6 @@
 		// PSC5 in uart mode example
 		//serial@2800 {		// PSC5
 		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	cell-index = <4>;
 		//	reg = <0x2800 0x100>;
 		//	interrupts = <2 12 0>;
 		//};
arch/powerpc/boot/dts/media5200.dts +0 -2
index a70ef68..e027f45 100644
@@ -185,8 +185,6 @@
 		// PSC6 in uart mode
 		console: psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
-			port-number = <0>;  // Logical port assignment
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
 		};
arch/powerpc/boot/dts/motionpro.dts +0 -2
index f6261ea..3ab4666 100644
@@ -277,8 +277,6 @@
 			reg = <0 0 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
-			#size-cells = <1>;
-			#address-cells = <1>;
 		};
 	};
 };
arch/powerpc/boot/dts/pcm030.dts +0 -2
index 3a4f554..f3e30bb 100644
@@ -196,7 +196,6 @@
 
 		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <2>;
 			reg = <0x2400 0x100>;
 			interrupts = <2 3 0>;
 		};
@@ -207,7 +206,6 @@
 
 		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
 		};
arch/powerpc/boot/dts/pcm032.dts +0 -2
index 17596c7..e0f2702 100644
@@ -196,7 +196,6 @@
 
 		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <2>;
 			reg = <0x2400 0x100>;
 			interrupts = <2 3 0>;
 		};
@@ -207,7 +206,6 @@
 
 		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			cell-index = <5>;
 			reg = <0x2c00 0x100>;
 			interrupts = <2 4 0>;
 		};
#7 lore raw

PATCH 4/5 powerpc/5200: dts: Change combatible strings on localbus

In reply to John Bonesio

This patch changes some incorrect compatible strings on the local plus bus node in dts files for MPC5200b based systems.

---

 arch/powerpc/boot/dts/cm5200.dts    |    2 +-
 arch/powerpc/boot/dts/digsy_mtc.dts |    2 +-
 arch/powerpc/boot/dts/media5200.dts |    2 +-
 arch/powerpc/boot/dts/motionpro.dts |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/boot/dts/cm5200.dts +1 -1
index d549897..22f7233 100644
@@ -219,7 +219,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xfc000000 0x2000000>;
arch/powerpc/boot/dts/digsy_mtc.dts +1 -1
index f0592de..3147b98 100644
@@ -218,7 +218,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x1000000>;
arch/powerpc/boot/dts/media5200.dts +1 -1
index e027f45..861f09f 100644
@@ -270,7 +270,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 
arch/powerpc/boot/dts/motionpro.dts +1 -1
index 3ab4666..97cb085 100644
@@ -236,7 +236,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x01000000
Applied
#8 lore raw

Re: [PATCH 4/5] powerpc/5200: dts: Change combatible strings on localbus

Quoted 5 lines · John Bonesio

This patch changes some incorrect compatible strings on the local plus bus node in dts files for MPC5200b based systems.

---

Applied, thanks.

g.

Quoted 60 lines
 arch/powerpc/boot/dts/cm5200.dts    |    2 +-
 arch/powerpc/boot/dts/digsy_mtc.dts |    2 +-
 arch/powerpc/boot/dts/media5200.dts |    2 +-
 arch/powerpc/boot/dts/motionpro.dts |    2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)
arch/powerpc/boot/dts/cm5200.dts +1 -1
index d549897..22f7233 100644
@@ -219,7 +219,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xfc000000 0x2000000>;
arch/powerpc/boot/dts/digsy_mtc.dts +1 -1
index f0592de..3147b98 100644
@@ -218,7 +218,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x1000000>;
arch/powerpc/boot/dts/media5200.dts +1 -1
index e027f45..861f09f 100644
@@ -270,7 +270,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 
arch/powerpc/boot/dts/motionpro.dts +1 -1
index 3ab4666..97cb085 100644
@@ -236,7 +236,7 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","simple-bus";
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
 		#address-cells = <2>;
 		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x01000000
#9 lore raw

PATCH 5/5 powerpc/5200: dts: refactor dts files

In reply to John Bonesio

This patch creates mpc5200b.dtsi containing the information for the MPC5200b SoC then modifies all of the dts files for MPC5200b based systems to use mpc5200b.dtsi.

---

 arch/powerpc/boot/dts/cm5200.dts    |  196 +++----------------------
 arch/powerpc/boot/dts/digsy_mtc.dts |  173 +++-------------------
 arch/powerpc/boot/dts/lite5200b.dts |  229 ++---------------------------
 arch/powerpc/boot/dts/media5200.dts |  212 +++------------------------
 arch/powerpc/boot/dts/motionpro.dts |  190 +++---------------------
 arch/powerpc/boot/dts/mpc5200b.dtsi |  276 +++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/dts/mucmc52.dts   |  176 ++++++----------------
 arch/powerpc/boot/dts/pcm030.dts    |  193 ++----------------------
 arch/powerpc/boot/dts/pcm032.dts    |  197 +------------------------
 arch/powerpc/boot/dts/uc101.dts     |  162 ++++-----------------
 10 files changed, 486 insertions(+), 1518 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mpc5200b.dtsi
arch/powerpc/boot/dts/cm5200.dts +24 -172
index 22f7233..c6d5d46 100644
@@ -10,226 +10,78 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "schindler,cm5200";
 	compatible = "schindler,cm5200";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;		// L1, 16K
-			i-cache-size = <0x4000>;		// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		can@900 {
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		can@980 {
+			status = "disabled";
 		};
 
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
 		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
 		psc@2400 {		// PSC3
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
 		};
 
-		psc@2c00 {		// PSC6
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
+		psc@2600 {		// PSC4
+			status = "disabled";
 		};
 
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
+		psc@2800 {		// PSC5
+			status = "disabled";
 		};
 
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
 
+		mdio@3000 {
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
+		ata@3a00 {
+			status = "disabled";
 		};
 
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
+		i2c@3d00 {
+			status = "disabled";
 		};
+
 	};
 
-	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfc000000 0x2000000>;
+	pci@f0000d00 {
+		status = "disabled";
+	};
 
+	localbus {
 		// 16-bit flash device at LocalPlus Bus CS0
 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x2000000>;
 			bank-width = <2>;
 			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
 		};
 	};
 };
arch/powerpc/boot/dts/digsy_mtc.dts +21 -152

232 lines not on this page · raw message

arch/powerpc/boot/dts/lite5200b.dts +18 -211

302 lines not on this page · raw message

arch/powerpc/boot/dts/media5200.dts +21 -191

291 lines not on this page · raw message

arch/powerpc/boot/dts/motionpro.dts +22 -168

257 lines not on this page · raw message

arch/powerpc/boot/dts/mpc5200b.dtsi new file +276 -0

276 lines not on this page · raw message

arch/powerpc/boot/dts/mucmc52.dts +45 -131

257 lines not on this page · raw message

arch/powerpc/boot/dts/pcm030.dts +16 -177

283 lines not on this page · raw message

arch/powerpc/boot/dts/pcm032.dts +11 -186

292 lines not on this page · raw message

arch/powerpc/boot/dts/uc101.dts +32 -130

248 lines not on this page · raw message

#10 lore raw

Re: [PATCH 5/5] powerpc/5200: dts: refactor dts files

Quoted 5 lines · John Bonesio

This patch creates mpc5200b.dtsi containing the information for the MPC5200b SoC then modifies all of the dts files for MPC5200b based systems to use mpc5200b.dtsi.

Applied, thanks. I may pull it out again before I ask Linus to pull because this patch depends on a patch that I posted today to skip registration of disabled devices, but for the time being it is in next-devicetree.

g.

Quoted 2,773 lines

---

 arch/powerpc/boot/dts/cm5200.dts    |  196 +++----------------------
 arch/powerpc/boot/dts/digsy_mtc.dts |  173 +++-------------------
 arch/powerpc/boot/dts/lite5200b.dts |  229 ++---------------------------
 arch/powerpc/boot/dts/media5200.dts |  212 +++------------------------
 arch/powerpc/boot/dts/motionpro.dts |  190 +++---------------------
 arch/powerpc/boot/dts/mpc5200b.dtsi |  276 +++++++++++++++++++++++++++++++++++
 arch/powerpc/boot/dts/mucmc52.dts   |  176 ++++++----------------
 arch/powerpc/boot/dts/pcm030.dts    |  193 ++----------------------
 arch/powerpc/boot/dts/pcm032.dts    |  197 +------------------------
 arch/powerpc/boot/dts/uc101.dts     |  162 ++++-----------------
 10 files changed, 486 insertions(+), 1518 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/mpc5200b.dtsi
arch/powerpc/boot/dts/cm5200.dts +24 -172
index 22f7233..c6d5d46 100644
@@ -10,226 +10,78 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "schindler,cm5200";
 	compatible = "schindler,cm5200";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;		// L1, 16K
-			i-cache-size = <0x4000>;		// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		can@900 {
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		can@980 {
+			status = "disabled";
 		};
 
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
 		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
 		psc@2400 {		// PSC3
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
 		};
 
-		psc@2c00 {		// PSC6
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
+		psc@2600 {		// PSC4
+			status = "disabled";
 		};
 
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
+		psc@2800 {		// PSC5
+			status = "disabled";
 		};
 
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
 
+		mdio@3000 {
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
+		ata@3a00 {
+			status = "disabled";
 		};
 
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
+		i2c@3d00 {
+			status = "disabled";
 		};
+
 	};
 
-	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		ranges = <0 0 0xfc000000 0x2000000>;
+	pci@f0000d00 {
+		status = "disabled";
+	};
 
+	localbus {
 		// 16-bit flash device at LocalPlus Bus CS0
 		flash@0,0 {
 			compatible = "cfi-flash";
 			reg = <0 0 0x2000000>;
 			bank-width = <2>;
 			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
 		};
 	};
 };
arch/powerpc/boot/dts/digsy_mtc.dts +21 -152
index 3147b98..a12b587 100644
@@ -11,195 +11,64 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "intercontrol,digsy-mtc";
 	compatible = "intercontrol,digsy-mtc";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;		// L1, 16K
-			i-cache-size = <0x4000>;		// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x02000000>;	// 32MB
 	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
+		rtc@800 {
+			status = "disabled";
 		};
 
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
+		can@900 {
+			status = "disabled";
 		};
 
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
+		can@980 {
+			status = "disabled";
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2000 {		// PSC1
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2200 {		// PSC2
+			status = "disabled";
 		};
 
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2400 {		// PSC3
+			status = "disabled";
 		};
 
 		psc@2600 {		// PSC4
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2600 0x100>;
-			interrupts = <2 11 0>;
 		};
 
 		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2800 0x100>;
-			interrupts = <2 12 0>;
 		};
 
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
+		psc@2c00 {		// PSC6
+			status = "disabled";
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
 		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-
 			rtc@50 {
 				compatible = "at,24c08";
 				reg = <0x50>;
@@ -211,16 +80,16 @@
 			};
 		};
 
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
+		i2c@3d40 {
+			status = "disabled";
 		};
 	};
 
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x1000000>;
 
 		// 16-bit flash device at LocalPlus Bus CS0
arch/powerpc/boot/dts/lite5200b.dts +18 -211
index c0a4e45..8d15dfd 100644
@@ -10,253 +10,71 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "fsl,lite5200b";
 	compatible = "fsl,lite5200b";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x10000000>;	// 256MB
 	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
-		};
-
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+			cell-index = <0>;
 		};
 
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
+		psc@2200 {		// PSC2
+			status = "disabled";
 		};
 
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
+		psc@2400 {		// PSC3
+			status = "disabled";
 		};
 
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		psc@2600 {		// PSC4
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2800 {		// PSC5
+			status = "disabled";
 		};
 
-		psc@2000 {		// PSC1
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
+		psc@2c00 {		// PSC6
+			status = "disabled";
 		};
 
 		// PSC2 in ac97 mode example
 		//ac97@2200 {		// PSC2
 		//	compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 		//	cell-index = <1>;
-		//	reg = <0x2200 0x100>;
-		//	interrupts = <2 2 0>;
 		//};
 
 		// PSC3 in CODEC mode example
 		//i2s@2400 {		// PSC3
 		//	compatible = "fsl,mpc5200b-psc-i2s"; //not 5200 compatible
 		//	cell-index = <2>;
-		//	reg = <0x2400 0x100>;
-		//	interrupts = <2 3 0>;
-		//};
-
-		// PSC4 in uart mode example
-		//serial@2600 {		// PSC4
-		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	reg = <0x2600 0x100>;
-		//	interrupts = <2 11 0>;
-		//};
-
-		// PSC5 in uart mode example
-		//serial@2800 {		// PSC5
-		//	compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-		//	reg = <0x2800 0x100>;
-		//	interrupts = <2 12 0>;
 		//};
 
 		// PSC6 in spi mode example
 		//spi@2c00 {		// PSC6
 		//	compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 		//	cell-index = <5>;
-		//	reg = <0x2c00 0x100>;
-		//	interrupts = <2 4 0>;
 		//};
 
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
-		};
-
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-
 			eeprom@50 {
 				compatible = "atmel,24c02";
 				reg = <0x50>;
@@ -270,12 +88,6 @@
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 				 0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -295,19 +107,14 @@
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xfe000000 0x02000000>;
 
 		flash@0,0 {
 			compatible = "cfi-flash";
-			reg = <0 0 0x02000000>;
-			bank-width = <1>;
-			#size-cells = <1>;
-			#address-cells = <1>;
+                        reg = <0 0 0x02000000>;
+                        bank-width = <1>;
+                        #size-cells = <1>;
+                        #address-cells = <1>;
 
 			partition@0 {
 				label = "kernel";
arch/powerpc/boot/dts/media5200.dts +21 -191
index 861f09f..84558f8 100644
@@ -11,14 +11,11 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "fsl,media5200";
 	compatible = "fsl,media5200";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
 
 	aliases {
 		console = &console;
@@ -30,16 +27,7 @@
 	};
 
 	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;		// L1, 16K
-			i-cache-size = <0x4000>;		// L1, 16K
 			timebase-frequency = <33000000>;	// 33 MHz, these were configured by U-Boot
 			bus-frequency = <132000000>;		// 132 MHz
 			clock-frequency = <396000000>;		// 396 MHz
@@ -47,203 +35,53 @@
 	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>;	// 128MB RAM
 	};
 
-	soc@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
+	soc5200@f0000000 {
 		bus-frequency = <132000000>;// 132 MHz
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
 
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
+		psc@2000 {	// PSC1
+			status = "disabled";
 		};
 
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
+		psc@2200 {	// PSC2
+			status = "disabled";
 		};
 
-		timer@660 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
+		psc@2400 {	// PSC3
+			status = "disabled";
 		};
 
-		timer@670 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
+		psc@2600 {	// PSC4
+			status = "disabled";
 		};
 
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0x100>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		psc@2800 {	// PSC5
+			status = "disabled";
 		};
 
 		// PSC6 in uart mode
 		console: psc@2c00 {		// PSC6
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
-		};
-
-		eth0: ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
-		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
+		usb@1000 {
+			reg = <0x1000 0x100>;
 		};
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &media5200_fpga 0 2 // 1st slot
 				 0xc000 0 0 2 &media5200_fpga 0 3
@@ -260,37 +98,29 @@
 
 				 0xe000 0 0 1 &media5200_fpga 0 5 // CoralIP
 				>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		interrupt-parent = <&mpc5200_pic>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
+		interrupt-parent = <&mpc5200_pic>;
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = < 0 0 0xfc000000 0x02000000
 			   1 0 0xfe000000 0x02000000
 			   2 0 0xf0010000 0x00010000
 			   3 0 0xf0020000 0x00010000 >;
-
 		flash@0,0 {
 			compatible = "amd,am29lv28ml", "cfi-flash";
-			reg = <0 0x0 0x2000000>;		// 32 MB
-			bank-width = <4>;			// Width in bytes of the flash bank
-			device-width = <2>;			// Two devices on each bank
+			reg = <0 0x0 0x2000000>;                // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
 		};
 
 		flash@1,0 {
 			compatible = "amd,am29lv28ml", "cfi-flash";
-			reg = <1 0 0x2000000>;			// 32 MB
-			bank-width = <4>;			// Width in bytes of the flash bank
-			device-width = <2>;			// Two devices on each bank
+			reg = <1 0 0x2000000>;                  // 32 MB
+			bank-width = <4>;                       // Width in bytes of the flash bank
+			device-width = <2>;                     // Two devices on each bank
 		};
 
 		media5200_fpga: fpga@2,0 {
arch/powerpc/boot/dts/motionpro.dts +22 -168
index 97cb085..2276ccd 100644
@@ -10,219 +10,69 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "promess,motionpro";
 	compatible = "promess,motionpro";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
-		timer@620 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
-		};
-
-		timer@630 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
-		};
-
-		timer@640 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
-		};
-
-		timer@650 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
-		};
-
 		timer@660 {	// Motion-PRO status LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-statusled";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
 			blink-delay = <100>; // 100 msec
 		};
 
 		timer@670 {	// Motion-PRO ready LED
 			compatible = "promess,motionpro-led";
 			label = "motionpro-readyled";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
 		};
 
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		can@900 {
+			status = "disabled";
 		};
 
 		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
 		// PSC2 in spi master mode 
 		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi";
 			cell-index = <1>;
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
-		// PSC5 in uart mode
+		psc@2400 {		// PSC3
+			status = "disabled";
+		};
+
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
 		psc@2800 {		// PSC5
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2800 0x100>;
-			interrupts = <2 12 0>;
 		};
 
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
+		psc@2c00 {		// PSC6
+			status = "disabled";
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;       // fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;   // these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@2 {
 				reg = <2>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
+		i2c@3d00 {
+			status = "disabled";
 		};
 
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
-
 			rtc@68 {
 				compatible = "dallas,ds1339";
 				reg = <0x68>;
@@ -235,10 +85,11 @@
 		};
 	};
 
+	pci@f0000d00 {
+		status = "disabled";
+	};
+
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
 		ranges = <0 0 0xff000000 0x01000000
 			  1 0 0x50000000 0x00010000
 			  2 0 0x50010000 0x00010000
@@ -277,6 +128,9 @@
 			reg = <0 0 0x01000000>;
 			bank-width = <2>;
 			device-width = <2>;
+			#size-cells = <1>;
+			#address-cells = <1>;
 		};
+
 	};
 };
arch/powerpc/boot/dts/mpc5200b.dtsi new file +276 -0
new file mode 100644
index 0000000..62cb4c9
@@ -0,0 +1,276 @@
+/*
+ * base MPC5200b Device Tree Source
+ *
+ * Copyright (C) 2010 SecretLab
+ * Grant Likely <[email protected]>
+ * John Bonesio <[email protected]>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "fsl,mpc5200b";
+	compatible = "fsl,mpc5200b";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	interrupt-parent = <&mpc5200_pic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		powerpc: PowerPC,5200@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;	// from bootloader
+			bus-frequency = <0>;		// from bootloader
+			clock-frequency = <0>;		// from bootloader
+		};
+	};
+
+	memory: memory {
+		device_type = "memory";
+		reg = <0x00000000 0x04000000>;	// 64MB
+	};
+
+	soc: soc5200@f0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "fsl,mpc5200b-immr";
+		ranges = <0 0xf0000000 0x0000c000>;
+		reg = <0xf0000000 0x00000100>;
+		bus-frequency = <0>;		// from bootloader
+		system-frequency = <0>;		// from bootloader
+
+		cdm@200 {
+			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
+			reg = <0x200 0x38>;
+		};
+
+		mpc5200_pic: interrupt-controller@500 {
+			// 5200 interrupts are encoded into two levels;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
+			reg = <0x500 0x80>;
+		};
+
+		timer@600 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x600 0x10>;
+			interrupts = <1 9 0>;
+		};
+
+		timer@610 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x610 0x10>;
+			interrupts = <1 10 0>;
+		};
+
+		timer@620 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x620 0x10>;
+			interrupts = <1 11 0>;
+		};
+
+		timer@630 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x630 0x10>;
+			interrupts = <1 12 0>;
+		};
+
+		timer@640 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x640 0x10>;
+			interrupts = <1 13 0>;
+		};
+
+		timer@650 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x650 0x10>;
+			interrupts = <1 14 0>;
+		};
+
+		timer@660 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x660 0x10>;
+			interrupts = <1 15 0>;
+		};
+
+		timer@670 {	// General Purpose Timer
+			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
+			reg = <0x670 0x10>;
+			interrupts = <1 16 0>;
+		};
+
+		rtc@800 {	// Real time clock
+			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
+			reg = <0x800 0x100>;
+			interrupts = <1 5 0 1 6 0>;
+		};
+
+		can@900 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 17 0>;
+			reg = <0x900 0x80>;
+		};
+
+		can@980 {
+			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
+			interrupts = <2 18 0>;
+			reg = <0x980 0x80>;
+		};
+
+		gpio_simple: gpio@b00 {
+			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
+			reg = <0xb00 0x40>;
+			interrupts = <1 7 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		gpio_wkup: gpio@c00 {
+			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
+			reg = <0xc00 0x40>;
+			interrupts = <1 8 0 0 3 0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		spi@f00 {
+			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
+			reg = <0xf00 0x20>;
+			interrupts = <2 13 0 2 14 0>;
+		};
+
+		usb: usb@1000 {
+			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
+			reg = <0x1000 0xff>;
+			interrupts = <2 6 0>;
+		};
+
+		dma-controller@1200 {
+			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
+			reg = <0x1200 0x80>;
+			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
+			              3 4 0  3 5 0  3 6 0  3 7 0
+			              3 8 0  3 9 0  3 10 0  3 11 0
+			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		};
+
+		xlb@1f00 {
+			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
+			reg = <0x1f00 0x100>;
+		};
+
+		psc1: psc@2000 {		// PSC1
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2000 0x100>;
+			interrupts = <2 1 0>;
+		};
+
+		psc2: psc@2200 {		// PSC2
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2200 0x100>;
+			interrupts = <2 2 0>;
+		};
+
+		psc3: psc@2400 {		// PSC3
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2400 0x100>;
+			interrupts = <2 3 0>;
+		};
+
+		psc4: psc@2600 {		// PSC4
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2600 0x100>;
+			interrupts = <2 11 0>;
+		};
+
+		psc5: psc@2800 {		// PSC5
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2800 0x100>;
+			interrupts = <2 12 0>;
+		};
+
+		psc6: psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc","fsl,mpc5200-psc";
+			reg = <0x2c00 0x100>;
+			interrupts = <2 4 0>;
+		};
+
+		eth0: ethernet@3000 {
+			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
+			reg = <0x3000 0x400>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <2 5 0>;
+			phy-handle = <&phy0>;
+		};
+
+		mdio@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
+			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
+			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+		};
+
+		ata@3a00 {
+			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
+			reg = <0x3a00 0x100>;
+			interrupts = <2 7 0>;
+		};
+
+		i2c@3d00 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d00 0x40>;
+			interrupts = <2 15 0>;
+		};
+
+		i2c@3d40 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+			reg = <0x3d40 0x40>;
+			interrupts = <2 16 0>;
+		};
+
+		sram@8000 {
+			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
+			reg = <0x8000 0x4000>;
+		};
+	};
+
+	pci: pci@f0000d00 {
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		device_type = "pci";
+		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
+		reg = <0xf0000d00 0x100>;
+		// interrupt-map-mask = need to add
+		// interrupt-map = need to add
+		clock-frequency = <0>; // From boot loader
+		interrupts = <2 8 0 2 9 0 2 10 0>;
+		bus-range = <0 0>;
+		// ranges = need to add
+	};
+
+	localbus: localbus {
+		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		ranges = <0 0 0xfc000000 0x2000000>;
+	};
+};
arch/powerpc/boot/dts/mucmc52.dts +45 -131
index 8dc212d..b369db5 100644
@@ -11,172 +11,105 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "manroland,mucmc52";
 	compatible = "manroland,mucmc52";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		gpt0: timer@600 {	// GPT 0 in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		timer@640 {
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		timer@650 {
+			status = "disabled";
 		};
 
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		timer@660 {
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		timer@670 {
+			status = "disabled";
 		};
 
-		psc@2000 { /* PSC1 in UART mode */
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
+		rtc@800 {
+			status = "disabled";
+		};
+
+		can@900 {
+			status = "disabled";
+		};
+
+		can@980 {
+			status = "disabled";
+		};
+
+		spi@f00 {
+			status = "disabled";
+		};
+
+		usb@1000 {
+			status = "disabled";
 		};
 
-		psc@2200 { /* PSC2 in UART mode */
+		psc@2000 {		// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
-		psc@2c00 { /* PSC6 in UART mode */
+		psc@2200 {		// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
+		psc@2400 {		// PSC3
+			status = "disabled";
 		};
 
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>; 	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>; 	// these are for "mii command finished", not link changes & co.
+		psc@2600 {		// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {		// PSC5
+			status = "disabled";
+		};
 
+		psc@2c00 {		// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		mdio@3000 {
 			phy0: ethernet-phy@0 {
 				compatible = "intel,lxt971";
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
+		i2c@3d00 {
+			status = "disabled";
 		};
 
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			hwmon@2c {
 				compatible = "ad,adm9240";
 				reg = <0x2c>;
@@ -186,20 +119,9 @@
 				reg = <0x51>;
 			};
 		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <
 				/* IDSEL 0x10 */
@@ -208,20 +130,12 @@
 				0x8000 0 0 3 &mpc5200_pic 0 2 3
 				0x8000 0 0 4 &mpc5200_pic 0 1 3
 				>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
 			  0x02000000 0 0x90000000 0x90000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xff800000 0x00800000
 			  1 0 0x80000000 0x00800000
 			  3 0 0x80000000 0x00800000>;
arch/powerpc/boot/dts/pcm030.dts +16 -177
index f3e30bb..b2ee689 100644
@@ -12,244 +12,88 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "phytec,pcm030";
 	compatible = "phytec,pcm030";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
+		timer@600 {		// General Purpose Timer
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
 			compatible = "fsl,mpc5200b-gpt-gpio","fsl,mpc5200-gpt-gpio";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
 		psc@2000 { /* PSC1 in ac97 mode */
 			compatible = "mpc5200b-psc-ac97","fsl,mpc5200b-psc-ac97";
 			cell-index = <0>;
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
 		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
 
 		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
 		};
 
 		/* PSC4 is ??? */
-
+		psc@2600 {
+			status = "disabled";
+		};
+		
 		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
 
 		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
-		};
-
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
@@ -267,12 +111,6 @@
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 				 0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -283,11 +121,12 @@
 				 0xc800 0 0 2 &mpc5200_pic 1 2 3
 				 0xc800 0 0 3 &mpc5200_pic 1 3 3
 				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
+
+	localbus {
+		status = "disabled";
+	};
 };
arch/powerpc/boot/dts/pcm032.dts +11 -186
index e0f2702..184e194 100644
@@ -12,99 +12,37 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "phytec,pcm032";
 	compatible = "phytec,pcm032";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
 
 	memory {
-		device_type = "memory";
 		reg = <0x00000000 0x08000000>;	// 128MB
 	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
-		timer@600 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
+		timer@600 {		// General Purpose Timer
 			fsl,has-wdt;
 		};
 
-		timer@610 {	// General Purpose Timer
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
-		};
-
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt3: timer@630 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x630 0x10>;
-			interrupts = <1 12 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
@@ -118,138 +56,45 @@
 		};
 
 		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		rtc@800 {	// Real time clock
-			compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
-			reg = <0x800 0x100>;
-			interrupts = <1 5 0 1 6 0>;
-		};
-
-		can@900 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 17 0>;
-			reg = <0x900 0x80>;
-		};
-
-		can@980 {
-			compatible = "fsl,mpc5200b-mscan","fsl,mpc5200-mscan";
-			interrupts = <2 18 0>;
-			reg = <0x980 0x80>;
-		};
-
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
-		};
-
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		spi@f00 {
-			compatible = "fsl,mpc5200b-spi","fsl,mpc5200-spi";
-			reg = <0xf00 0x20>;
-			interrupts = <2 13 0 2 14 0>;
-		};
-
-		usb@1000 {
-			compatible = "fsl,mpc5200b-ohci","fsl,mpc5200-ohci","ohci-be";
-			reg = <0x1000 0xff>;
-			interrupts = <2 6 0>;
-		};
-
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
-		};
-
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
-		};
-
 		psc@2000 {	/* PSC1 is ac97 */
 			compatible = "fsl,mpc5200b-psc-ac97","fsl,mpc5200-psc-ac97";
 			cell-index = <0>;
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
 		};
 
 		/* PSC2 port is used by CAN1/2 */
+		psc@2200 {
+			status = "disabled";
+		};
 
 		psc@2400 { /* PSC3 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2400 0x100>;
-			interrupts = <2 3 0>;
 		};
 
 		/* PSC4 is ??? */
+		psc@2600 {
+			status = "disabled";
+		};
 
 		/* PSC5 is ??? */
+		psc@2800 {
+			status = "disabled";
+		};
 
 		psc@2c00 { /* PSC6 in UART mode */
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
-		};
-
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
 		};
 
 		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
-
 			phy0: ethernet-phy@0 {
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
-		};
-
-		i2c@3d00 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d00 0x40>;
-			interrupts = <2 15 0>;
-		};
-
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			rtc@51 {
 				compatible = "nxp,pcf8563";
 				reg = <0x51>;
@@ -259,20 +104,9 @@
 				reg = <0x52>;
 			};
 		};
-
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
 	};
 
 	pci@f0000d00 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		device_type = "pci";
-		compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
-		reg = <0xf0000d00 0x100>;
 		interrupt-map-mask = <0xf800 0 0 7>;
 		interrupt-map = <0xc000 0 0 1 &mpc5200_pic 0 0 3 // 1st slot
 				 0xc000 0 0 2 &mpc5200_pic 1 1 3
@@ -283,20 +117,12 @@
 				 0xc800 0 0 2 &mpc5200_pic 1 2 3
 				 0xc800 0 0 3 &mpc5200_pic 1 3 3
 				 0xc800 0 0 4 &mpc5200_pic 0 0 3>;
-		clock-frequency = <0>; // From boot loader
-		interrupts = <2 8 0 2 9 0 2 10 0>;
-		bus-range = <0 0>;
 		ranges = <0x42000000 0 0x80000000 0x80000000 0 0x20000000
 			  0x02000000 0 0xa0000000 0xa0000000 0 0x10000000
 			  0x01000000 0 0x00000000 0xb0000000 0 0x01000000>;
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xfe000000 0x02000000
 			  1 0 0xfc000000 0x02000000
 			  2 0 0xfbe00000 0x00200000
@@ -385,4 +211,3 @@
                  */
 	};
 };
-
arch/powerpc/boot/dts/uc101.dts +32 -130
index e00441a..49be562 100644
@@ -11,79 +11,24 @@
  * option) any later version.
  */
 
-/dts-v1/;
+/include/ "mpc5200b.dtsi"
 
 / {
 	model = "manroland,uc101";
 	compatible = "manroland,uc101";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	interrupt-parent = <&mpc5200_pic>;
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,5200@0 {
-			device_type = "cpu";
-			reg = <0>;
-			d-cache-line-size = <32>;
-			i-cache-line-size = <32>;
-			d-cache-size = <0x4000>;	// L1, 16K
-			i-cache-size = <0x4000>;	// L1, 16K
-			timebase-frequency = <0>;	// from bootloader
-			bus-frequency = <0>;		// from bootloader
-			clock-frequency = <0>;		// from bootloader
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x04000000>;	// 64MB
-	};
 
 	soc5200@f0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "fsl,mpc5200b-immr";
-		ranges = <0 0xf0000000 0x0000c000>;
-		reg = <0xf0000000 0x00000100>;
-		bus-frequency = <0>;		// from bootloader
-		system-frequency = <0>;		// from bootloader
-
-		cdm@200 {
-			compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
-			reg = <0x200 0x38>;
-		};
-
-		mpc5200_pic: interrupt-controller@500 {
-			// 5200 interrupts are encoded into two levels;
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
-			reg = <0x500 0x80>;
-		};
-
 		gpt0: timer@600 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x600 0x10>;
-			interrupts = <1 9 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt1: timer@610 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x610 0x10>;
-			interrupts = <1 10 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt2: timer@620 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x620 0x10>;
-			interrupts = <1 11 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
@@ -97,118 +42,81 @@
 		};
 
 		gpt4: timer@640 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x640 0x10>;
-			interrupts = <1 13 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt5: timer@650 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x650 0x10>;
-			interrupts = <1 14 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt6: timer@660 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x660 0x10>;
-			interrupts = <1 15 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
 		gpt7: timer@670 {	// General Purpose Timer in GPIO mode
-			compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
-			reg = <0x670 0x10>;
-			interrupts = <1 16 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 		};
 
-		gpio_simple: gpio@b00 {
-			compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
-			reg = <0xb00 0x40>;
-			interrupts = <1 7 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		rtc@800 {
+			status = "disabled";
 		};
 
-		gpio_wkup: gpio@c00 {
-			compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
-			reg = <0xc00 0x40>;
-			interrupts = <1 8 0 0 3 0>;
-			gpio-controller;
-			#gpio-cells = <2>;
+		can@900 {
+			status = "disabled";
 		};
 
-		dma-controller@1200 {
-			compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
-			reg = <0x1200 0x80>;
-			interrupts = <3 0 0  3 1 0  3 2 0  3 3 0
-			              3 4 0  3 5 0  3 6 0  3 7 0
-			              3 8 0  3 9 0  3 10 0  3 11 0
-			              3 12 0  3 13 0  3 14 0  3 15 0>;
+		can@980 {
+			status = "disabled";
 		};
 
-		xlb@1f00 {
-			compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
-			reg = <0x1f00 0x100>;
+		spi@f00 {
+			status = "disabled";
 		};
 
-		psc@2000 { /* PSC1 in UART mode */
-			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2000 0x100>;
-			interrupts = <2 1 0>;
+		usb@1000 {
+			status = "disabled";
 		};
 
-		psc@2200 { /* PSC2 in UART mode */
+		psc@2000 {	// PSC1
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2200 0x100>;
-			interrupts = <2 2 0>;
 		};
 
-		psc@2c00 {		/* PSC6 in UART mode */
+		psc@2200 {	// PSC2
 			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
-			reg = <0x2c00 0x100>;
-			interrupts = <2 4 0>;
 		};
 
-		ethernet@3000 {
-			compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
-			reg = <0x3000 0x400>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <2 5 0>;
-			phy-handle = <&phy0>;
+		psc@2400 {	// PSC3
+			status = "disabled";
 		};
 
-		mdio@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
-			reg = <0x3000 0x400>;	// fec range, since we need to setup fec interrupts
-			interrupts = <2 5 0>;	// these are for "mii command finished", not link changes & co.
+		psc@2600 {	// PSC4
+			status = "disabled";
+		};
+
+		psc@2800 {	// PSC5
+			status = "disabled";
+		};
 
+		psc@2c00 {	// PSC6
+			compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
+		};
+
+		mdio@3000 {
 			phy0: ethernet-phy@0 {
 				compatible = "intel,lxt971";
 				reg = <0>;
 			};
 		};
 
-		ata@3a00 {
-			compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
-			reg = <0x3a00 0x100>;
-			interrupts = <2 7 0>;
+		i2c@3d00 {
+			status = "disabled";
 		};
 
 		i2c@3d40 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
-			reg = <0x3d40 0x40>;
-			interrupts = <2 16 0>;
 			fsl,preserve-clocking;
 			clock-frequency = <400000>;
 
@@ -221,19 +129,13 @@
 				reg = <0x51>;
 			};
 		};
+	};
 
-		sram@8000 {
-			compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
-			reg = <0x8000 0x4000>;
-		};
+	pci@f0000d00 {
+		status = "disabled";
 	};
 
 	localbus {
-		compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
-
-		#address-cells = <2>;
-		#size-cells = <1>;
-
 		ranges = <0 0 0xff800000 0x00800000
 			  1 0 0x80000000 0x00800000
 			  3 0 0x80000000 0x00800000>;