Skip to contentSkip to conversation

orion5x: accelerate NAND on the TS-78xx

PATCH New Alexander Clouter 2 participants 4 messages Jan 4, 2011 – Jan 8, 2011

Subsystems (4)
lore
Share & tools
lore

Alexander Clouter

author maintainer
#0 lore raw

PATCH 1/1 orion5x: accelerate NAND on the TS-78xx

The NAND supports 32bit reads and writes so lets stop shunting 8bit chunks across the bus.

Doing a dumb 'dd' benchmark, this increases performance roughly like so:
* read: 1.3MB/s to 3.4MB/s
* write: 614kB/s to 882kB/s

---
 arch/arm/mach-orion5x/ts78xx-setup.c |   42 ++++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
arch/arm/mach-orion5x/ts78xx-setup.c +42 -0
index 9a5d1ef..bcc21fe 100644
@@ -191,6 +191,46 @@ static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
 	return readb(TS_NAND_CTRL) & 0x20;
 }
 
+static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
+			const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_W;
+	uint32_t *buf32;
+	int i = 0;
+
+	while (len && (unsigned int)buf & 3) {
+		writeb(*buf++, io_base);
+		len--;
+	}
+	buf32 = (uint32_t *)buf;
+	while (i < len/4)
+		writel(buf32[i++], io_base);
+	i *= 4;
+	while (i < len)
+		writeb(buf[i++], io_base);
+}
+
+static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
+			uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_R;
+	uint32_t *buf32;
+	int i = 0;
+
+	while (len && (unsigned int)buf & 3) {
+		*buf++ = readb(io_base);
+		len--;
+	}
+	buf32 = (uint32_t *)buf;
+	while (i < len/4)
+		buf32[i++] = readl(io_base);
+	i *= 4;
+	while (i < len)
+		buf[i++] = readb(io_base);
+}
+
 const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
 
 static struct mtd_partition ts78xx_ts_nand_parts[] = {
@@ -233,6 +273,8 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
 		 */
 		.cmd_ctrl		= ts78xx_ts_nand_cmd_ctrl,
 		.dev_ready		= ts78xx_ts_nand_dev_ready,
+		.write_buf		= ts78xx_ts_nand_write_buf,
+		.read_buf		= ts78xx_ts_nand_read_buf,
 	},
 };
 
Signature · 1 line
1.7.2.3
#1 lore raw

PATCH 1/1 orion5x: accelerate NAND on the TS-78xx

Quoted 6 lines · Alexander Clouter

The NAND supports 32bit reads and writes so lets stop shunting 8bit chunks across the bus.

Doing a dumb 'dd' benchmark, this increases performance roughly like so:
* read: 1.3MB/s to 3.4MB/s
* write: 614kB/s to 882kB/s

Try something like the below. It's slightly more typing, but the underlying string IO functions should improve your transfer speed. Note that they won't do endian conversions.

Quoted 22 lines
---
 arch/arm/mach-orion5x/ts78xx-setup.c |   42 ++++++++++++++++++++++++++++++++++
 1 files changed, 42 insertions(+), 0 deletions(-)
arch/arm/mach-orion5x/ts78xx-setup.c +8 -0
index 9a5d1ef..bcc21fe 100644
@@ -191,6 +191,46 @@ static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd)
 	return readb(TS_NAND_CTRL) & 0x20;
 }
 
+static void ts78xx_ts_nand_write_buf(struct mtd_info *mtd,
+			const uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_W;
+	uint32_t *buf32;
+	int i = 0;
+

arch/arm/mach-orion5x/ts78xx-setup.c static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) · line 211

Quoted 10 lines
arch/arm/mach-orion5x/ts78xx-setup.c +10 -0
+	while (len && (unsigned int)buf & 3) {
+		writeb(*buf++, io_base);
+		len--;
+	}
+	buf32 = (uint32_t *)buf;
+	while (i < len/4)
+		writel(buf32[i++], io_base);
+	i *= 4;
+	while (i < len)
+		writeb(buf[i++], io_base);
	unsigned long off = ((unsigned long)buf & 3);
	int sz;

	if (off) {
		sz = min(4 - off, len);
		writesb(io_base, buf, sz);
		buf += sz;
		len -= sz;
	}

	sz = len >> 2;
	if (sz) {
		u32 *buf32 = (u32 *)buf;
		writesl(io_base, buf32, sz);
		buf += sz << 2;
		len -= sz << 2;
	}

	if (len)
		writesb(io_base, buf, len);
Quoted 10 lines
arch/arm/mach-orion5x/ts78xx-setup.c +10 -0
+}
+
+static void ts78xx_ts_nand_read_buf(struct mtd_info *mtd,
+			uint8_t *buf, int len)
+{
+	struct nand_chip *chip = mtd->priv;
+	void __iomem *io_base = chip->IO_ADDR_R;
+	uint32_t *buf32;
+	int i = 0;
+

arch/arm/mach-orion5x/ts78xx-setup.c static int ts78xx_ts_nand_dev_ready(struct mtd_info *mtd) · line 231

Quoted 10 lines
arch/arm/mach-orion5x/ts78xx-setup.c +10 -0
+	while (len && (unsigned int)buf & 3) {
+		*buf++ = readb(io_base);
+		len--;
+	}
+	buf32 = (uint32_t *)buf;
+	while (i < len/4)
+		buf32[i++] = readl(io_base);
+	i *= 4;
+	while (i < len)
+		buf[i++] = readb(io_base);
	unsigned long off = ((unsigned long)buf & 3);
	int sz;

	if (off) {
		sz = min(4 - off, len);
		readsb(io_base, buf, sz);
		buf += sz;
		len -= sz;
	}

	sz = len >> 2;
	if (sz) {
		u32 *buf32 = (u32 *)buf;
		readsl(io_base, buf32, sz);
		buf += sz << 2;
		len -= sz << 2;
	}

	if (len)
		readsb(io_base, buf, len);
Quoted 21 lines
arch/arm/mach-orion5x/ts78xx-setup.c +4 -0
+}
+
 const char *ts_nand_part_probes[] = { "cmdlinepart", NULL };
 
 static struct mtd_partition ts78xx_ts_nand_parts[] = {
@@ -233,6 +273,8 @@ static struct platform_nand_data ts78xx_ts_nand_data = {
 		 */
 		.cmd_ctrl		= ts78xx_ts_nand_cmd_ctrl,
 		.dev_ready		= ts78xx_ts_nand_dev_ready,
+		.write_buf		= ts78xx_ts_nand_write_buf,
+		.read_buf		= ts78xx_ts_nand_read_buf,
 	},
 };
 
Signature · 6 lines
1.7.2.3

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
author maintainer
#2 lore raw

PATCH 1/1 orion5x: accelerate NAND on the TS-78xx

Quoted 5 lines · Russell King - ARM Linux
Quoted 3 lines · Alexander Clouter

The NAND supports 32bit reads and writes so lets stop shunting 8bit chunks across the bus.

Quoted 8 lines
Quoted 3 lines

Doing a dumb 'dd' benchmark, this increases performance roughly like so:
* read: 1.3MB/s to 3.4MB/s
* write: 614kB/s to 882kB/s

Try something like the below. It's slightly more typing, but the underlying string IO functions should improve your transfer speed. Note that they won't do endian conversions.

I get roughly the same speeds with your approach...I am happy to swing either your way or my original implementation; well actually it was stolen from Nico's orion_nand implementation :)

What should I submit? These functions will at somestage get DMA support added.

Cheers

Signature · 2 lines
Alexander Clouter
.sigmonster says: Live Free or Live in Massachusetts.
author maintainer
#3 lore raw

PATCH 1/1 orion5x: accelerate NAND on the TS-78xx

Quoted 13 lines · Alexander Clouter
Quoted 13 lines · Alexander Clouter
Quoted 6 lines

The NAND supports 32bit reads and writes so lets stop shunting 8bit chunks across the bus.

Doing a dumb 'dd' benchmark, this increases performance roughly like so:
* read: 1.3MB/s to 3.4MB/s
* write: 614kB/s to 882kB/s

Try something like the below. It's slightly more typing, but the underlying string IO functions should improve your transfer speed. Note that they won't do endian conversions.

Quoted 7 lines

I get roughly the same speeds with your approach...I am happy to swing either your way or my original implementation; well actually it was stolen from Nico's orion_nand implementation :)

What should I submit? These functions will at somestage get DMA support added.

I decided I prefer your version and it 'hides' the while loops and is easier to read.

Cheers

Signature · 3 lines
Alexander Clouter
.sigmonster says: What!?  Me worry?
                  		-- Alfred E. Newman