Skip to contentSkip to conversation

native-sdk-image do_rootfs() fails

DISCUSSION Víctor M. Jáquez L. 3 participants 4 messages Jan 20, 2011 – Jan 21, 2011

lore
Share & tools
lore
#0 lore raw

I'm trying to build a native-sdk-image for pandaboard, both with angstrom-linux-gnueabi and external csl toolchains. Both builds failed in the same point:

| Configuring sysvinit.
| Collected errors:
|  * satisfy_dependencies_for: Cannot satisfy the following dependencies for task-sdk-native:
|  * 	virtual-libc-dev *
|  * opkg_install_cmd: Cannot install package task-sdk-native.
|  * resolve_conffiles: Existing conffile /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table is different from the conffile in the new package. The new conffile will be placed at /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table-opkg.
| ERROR: Function do_rootfs failed

I don't know how to deal with this issue. Any advice?

vmjl

#1 lore raw

2011/1/20 Víctor M. Jáquez L. <[email protected]>:

Quoted 12 lines

I'm trying to build a native-sdk-image for pandaboard, both with angstrom-linux-gnueabi and external csl toolchains. Both builds failed in the same point:

| Configuring sysvinit.
| Collected errors:
|  * satisfy_dependencies_for: Cannot satisfy the following dependencies for task-sdk-native:
|  *    virtual-libc-dev *
|  * opkg_install_cmd: Cannot install package task-sdk-native.
|  * resolve_conffiles: Existing conffile /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table is different from the conffile in the new package. The new conffile will be placed at /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table-opkg.
| ERROR: Function do_rootfs failed
Quoted 1 line

I don't know how to deal with this issue. Any advice?

I have built native-sdk-image twice (for qemuarm and for qemux86) this week w/o problems, but for minimal distro.

Signature · 1 line
Yury Bushmelev
#2 lore raw
Quoted 13 lines · Yury Bushmelev

2011/1/20 Víctor M. Jáquez L. <[email protected]>:

Quoted 12 lines

I'm trying to build a native-sdk-image for pandaboard, both with angstrom-linux-gnueabi and external csl toolchains. Both builds failed in the same point:

| Configuring sysvinit.
| Collected errors:
|  * satisfy_dependencies_for: Cannot satisfy the following dependencies for task-sdk-native:
|  *    virtual-libc-dev *
|  * opkg_install_cmd: Cannot install package task-sdk-native.
|  * resolve_conffiles: Existing conffile /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table is different from the conffile in the new package. The new conffile will be placed at /media/DISK/angstrom-setup-scripts/build/tmp-angstrom_2008_1/rootfs/native-sdk-image/etc/device_table-opkg.
| ERROR: Function do_rootfs failed
Quoted 4 lines
Quoted 1 line

I don't know how to deal with this issue. Any advice?

I have built native-sdk-image twice (for qemuarm and for qemux86) this week w/o problems, but for minimal distro.

I'm trying to build an image for the pandaboard but I faced this same issue:

http://comments.gmane.org/gmane.comp.handhelds.openembedded/4065

(the linux-omap4 kernel compilation broke because of "Error: selected processor does not support ARM mode `smc #0'")

So I moved back the binutils version to 2.20.1

vmjl

#3 lore raw

2011/1/21 Víctor M. Jáquez L. <[email protected]>:

Quoted 10 lines

I'm trying to build an image for the pandaboard but I faced this same issue:

http://comments.gmane.org/gmane.comp.handhelds.openembedded/4065

(the linux-omap4 kernel compilation broke because of "Error: selected processor does not support ARM mode `smc #0'")

So I moved back the binutils version to 2.20.1

No you should not do that. Its a coding problem and you should fix the kernel
Read my response in below post
http://comments.gmane.org/gmane.comp.handhelds.openembedded/40650
and port those 2 patches to your kernel

Thanks
-Khem