mptfusion: Remove bus reset for mptsas module

PATCH In review Kashyap, Desai 1 participant 1 message Feb 3, 2011

Subsystems (2)

SCSI LSI Logic MPT fusion drivers (FC/SAS/SPI)

lore

Share & tools

lore

Kashyap, Desai

author

2011-02-03 10:48 UTC #0 lore raw

PATCH 3/6 mptfusion: Remove bus reset for mptsas module

Bus reset is not required for SAS Controller. It is valid for mptspi and mptfc, but for mptsas it is not required. It is an extra work for Error handling escallation for mptsas. Removing bus reset from error handling will eventually speedup Error handling for SAS controller.

Signed-off-by Kashyap Desai <[email protected]>

---

drivers/message/fusion/mptsas.c +0 -1

index d89d027..c4bf181 100644
@@ -1976,7 +1976,6 @@ static struct scsi_host_template mptsas_driver_template = {
 	.change_queue_depth 		= mptscsih_change_queue_depth,
 	.eh_abort_handler		= mptscsih_abort,
 	.eh_device_reset_handler	= mptscsih_dev_reset,
-	.eh_bus_reset_handler		= mptscsih_bus_reset,
 	.eh_host_reset_handler		= mptscsih_host_reset,
 	.bios_param			= mptscsih_bios_param,
 	.can_queue			= MPT_SAS_CAN_QUEUE,