Skip to contentSkip to conversation

dell-wmi: Received unknown WMI event (0x11)

DISCUSSION Felipe Balbi 2 participants 10 messages Feb 5, 2011 – Feb 7, 2011

lore
Share & tools
lore
#0 lore raw

Hi,

I believe this is a regression as it was working on 2.6.37 but with 2.6.38-rc3 I can't burn DVDs with my latitute e6410. When I put a blank double layer DVD on the drive I get:

[  393.020537] dell-wmi: Received unknown WMI event (0x11)
[  832.336855] dell-wmi: Received unknown WMI event (0x11)
[  832.409353] dell-wmi: Received unknown WMI event (0x11)
[  833.621140] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[  834.367611] dell-wmi: Received unknown WMI event (0x11)
[ 1001.665940] dell-wmi: Received unknown WMI event (0x11)
[ 1002.846845] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1003.591459] dell-wmi: Received unknown WMI event (0x11)
[ 1063.690326] dell-wmi: Received unknown WMI event (0x11)
[ 1064.942777] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1644.787491] dell-wmi: Received unknown WMI event (0x11)
[ 1644.849026] dell-wmi: Received unknown WMI event (0x11)
[ 1645.971790] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1646.719084] dell-wmi: Received unknown WMI event (0x11)
[ 2317.273481] dell-wmi: Received unknown WMI event (0x11)
[ 2318.540645] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2319.285487] dell-wmi: Received unknown WMI event (0x11)
[ 2379.364740] dell-wmi: Received unknown WMI event (0x11)
[ 2877.001258] dell-wmi: Received unknown WMI event (0x11)
[ 2878.211188] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2878.957282] dell-wmi: Received unknown WMI event (0x11)
[ 2903.422959] dell-wmi: Received unknown WMI event (0x11)
[ 2904.609272] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2905.352451] dell-wmi: Received unknown WMI event (0x11)
[ 2965.454915] dell-wmi: Received unknown WMI event (0x11)
[ 2966.701330] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3981.339257] dell-wmi: Received unknown WMI event (0x11)
[ 3982.510612] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3983.254770] dell-wmi: Received unknown WMI event (0x11)
[ 4045.466929] dell-wmi: Received unknown WMI event (0x11)
[ 4046.631137] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4047.391614] dell-wmi: Received unknown WMI event (0x11)
[ 4107.480071] dell-wmi: Received unknown WMI event (0x11)
[ 4108.631339] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4731.506881] dell-wmi: Received unknown WMI event (0x11)
[ 4732.646424] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4733.391238] dell-wmi: Received unknown WMI event (0x11)
[ 6025.385179] cdrom: This disc doesn't have any tracks I recognize!

and when I try to burn anything (well, a dry-run burn) I get:

$ growisofs -dvd-compat -use-the-force-luke=dao -use-the-force-luke=break:1913760 -speed=2 -Z /dev/dvd=my-backup-files.iso -dry-run
:-( /dev/dvd: CD_ROM_MEDIA_CHANGED ioctl failed: Inappropriate ioctl for device

Has anyone seen that before ? I'll try to reboot on 2.6.37 and try again just to be sure and will report back on the differences.

Signature · 1 line
balbi
#1 lore raw

Hi,

Quoted 45 lines · Felipe Balbi

Hi,

I believe this is a regression as it was working on 2.6.37 but with 2.6.38-rc3 I can't burn DVDs with my latitute e6410. When I put a blank double layer DVD on the drive I get:

[  393.020537] dell-wmi: Received unknown WMI event (0x11)
[  832.336855] dell-wmi: Received unknown WMI event (0x11)
[  832.409353] dell-wmi: Received unknown WMI event (0x11)
[  833.621140] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[  834.367611] dell-wmi: Received unknown WMI event (0x11)
[ 1001.665940] dell-wmi: Received unknown WMI event (0x11)
[ 1002.846845] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1003.591459] dell-wmi: Received unknown WMI event (0x11)
[ 1063.690326] dell-wmi: Received unknown WMI event (0x11)
[ 1064.942777] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1644.787491] dell-wmi: Received unknown WMI event (0x11)
[ 1644.849026] dell-wmi: Received unknown WMI event (0x11)
[ 1645.971790] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1646.719084] dell-wmi: Received unknown WMI event (0x11)
[ 2317.273481] dell-wmi: Received unknown WMI event (0x11)
[ 2318.540645] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2319.285487] dell-wmi: Received unknown WMI event (0x11)
[ 2379.364740] dell-wmi: Received unknown WMI event (0x11)
[ 2877.001258] dell-wmi: Received unknown WMI event (0x11)
[ 2878.211188] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2878.957282] dell-wmi: Received unknown WMI event (0x11)
[ 2903.422959] dell-wmi: Received unknown WMI event (0x11)
[ 2904.609272] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2905.352451] dell-wmi: Received unknown WMI event (0x11)
[ 2965.454915] dell-wmi: Received unknown WMI event (0x11)
[ 2966.701330] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3981.339257] dell-wmi: Received unknown WMI event (0x11)
[ 3982.510612] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3983.254770] dell-wmi: Received unknown WMI event (0x11)
[ 4045.466929] dell-wmi: Received unknown WMI event (0x11)
[ 4046.631137] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4047.391614] dell-wmi: Received unknown WMI event (0x11)
[ 4107.480071] dell-wmi: Received unknown WMI event (0x11)
[ 4108.631339] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4731.506881] dell-wmi: Received unknown WMI event (0x11)
[ 4732.646424] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4733.391238] dell-wmi: Received unknown WMI event (0x11)
[ 6025.385179] cdrom: This disc doesn't have any tracks I recognize!
Quoted 7 lines

and when I try to burn anything (well, a dry-run burn) I get:

$ growisofs -dvd-compat -use-the-force-luke=dao -use-the-force-luke=break:1913760 -speed=2 -Z /dev/dvd=my-backup-files.iso -dry-run
:-( /dev/dvd: CD_ROM_MEDIA_CHANGED ioctl failed: Inappropriate ioctl for device

Has anyone seen that before ? I'll try to reboot on 2.6.37 and try again just to be sure and will report back on the differences.

yes, it works like a charm on 2.6.37:

$ dmesg
[   91.522079] cdrom: This disc doesn't have any tracks I recognize!
$ growisofs -dvd-compat -use-the-force-luke=dao -use-the-force-luke=break:1913760 -speed=2 -Z /dev/dvd=my-backup-files.iso -dry-run
Executing 'builtin_dd if=cpx-mja.iso of=/dev/dvd obs=32k seek=0'

What more information can I grab which would help debugging ? I guess I could bisect and try to find the offending commit, but that'll take a few days.

Signature · 1 line
balbi
#2 lore raw
In reply to Felipe Balbi
Quoted 30 lines · Felipe Balbi
[  393.020537] dell-wmi: Received unknown WMI event (0x11)
[  832.336855] dell-wmi: Received unknown WMI event (0x11)
[  832.409353] dell-wmi: Received unknown WMI event (0x11)
[  833.621140] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[  834.367611] dell-wmi: Received unknown WMI event (0x11)
[ 1001.665940] dell-wmi: Received unknown WMI event (0x11)
[ 1002.846845] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1003.591459] dell-wmi: Received unknown WMI event (0x11)
[ 1063.690326] dell-wmi: Received unknown WMI event (0x11)
[ 1064.942777] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1644.787491] dell-wmi: Received unknown WMI event (0x11)
[ 1644.849026] dell-wmi: Received unknown WMI event (0x11)
[ 1645.971790] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1646.719084] dell-wmi: Received unknown WMI event (0x11)
[ 2317.273481] dell-wmi: Received unknown WMI event (0x11)
[ 2318.540645] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2319.285487] dell-wmi: Received unknown WMI event (0x11)
[ 2379.364740] dell-wmi: Received unknown WMI event (0x11)
[ 2877.001258] dell-wmi: Received unknown WMI event (0x11)
[ 2878.211188] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2878.957282] dell-wmi: Received unknown WMI event (0x11)
[ 2903.422959] dell-wmi: Received unknown WMI event (0x11)
[ 2904.609272] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2905.352451] dell-wmi: Received unknown WMI event (0x11)
[ 2965.454915] dell-wmi: Received unknown WMI event (0x11)
[ 2966.701330] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3981.339257] dell-wmi: Received unknown WMI event (0x11)
[ 3982.510612] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3983.254770] dell-wmi: Received unknown WMI event (0x11)
[ 4045.466929] dell-wmi: Received unknown WMI event (0x11)
Quoted 8 lines
[ 4046.631137] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4047.391614] dell-wmi: Received unknown WMI event (0x11)
[ 4107.480071] dell-wmi: Received unknown WMI event (0x11)
[ 4108.631339] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4731.506881] dell-wmi: Received unknown WMI event (0x11)
[ 4732.646424] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4733.391238] dell-wmi: Received unknown WMI event (0x11)
[ 6025.385179] cdrom: This disc doesn't have any tracks I recognize!

Nothing's changed in dell-wmi in that timeframe, so I suspect it's some other issue that's triggering here and the hardware is responding by sending events? Alternatively, these messages are pretty spread out. Do they directly correspond to you trying to burn something?

Signature · 1 line
Matthew Garrett | [email protected]
#3 lore raw

Hi,

Quoted 41 lines · Matthew Garrett
Quoted 30 lines · Felipe Balbi
[  393.020537] dell-wmi: Received unknown WMI event (0x11)
[  832.336855] dell-wmi: Received unknown WMI event (0x11)
[  832.409353] dell-wmi: Received unknown WMI event (0x11)
[  833.621140] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[  834.367611] dell-wmi: Received unknown WMI event (0x11)
[ 1001.665940] dell-wmi: Received unknown WMI event (0x11)
[ 1002.846845] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1003.591459] dell-wmi: Received unknown WMI event (0x11)
[ 1063.690326] dell-wmi: Received unknown WMI event (0x11)
[ 1064.942777] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1644.787491] dell-wmi: Received unknown WMI event (0x11)
[ 1644.849026] dell-wmi: Received unknown WMI event (0x11)
[ 1645.971790] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 1646.719084] dell-wmi: Received unknown WMI event (0x11)
[ 2317.273481] dell-wmi: Received unknown WMI event (0x11)
[ 2318.540645] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2319.285487] dell-wmi: Received unknown WMI event (0x11)
[ 2379.364740] dell-wmi: Received unknown WMI event (0x11)
[ 2877.001258] dell-wmi: Received unknown WMI event (0x11)
[ 2878.211188] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2878.957282] dell-wmi: Received unknown WMI event (0x11)
[ 2903.422959] dell-wmi: Received unknown WMI event (0x11)
[ 2904.609272] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 2905.352451] dell-wmi: Received unknown WMI event (0x11)
[ 2965.454915] dell-wmi: Received unknown WMI event (0x11)
[ 2966.701330] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3981.339257] dell-wmi: Received unknown WMI event (0x11)
[ 3982.510612] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 3983.254770] dell-wmi: Received unknown WMI event (0x11)
[ 4045.466929] dell-wmi: Received unknown WMI event (0x11)
Quoted 8 lines
[ 4046.631137] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4047.391614] dell-wmi: Received unknown WMI event (0x11)
[ 4107.480071] dell-wmi: Received unknown WMI event (0x11)
[ 4108.631339] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4731.506881] dell-wmi: Received unknown WMI event (0x11)
[ 4732.646424] [drm:ironlake_crtc_disable] *ERROR* failed to disable transcoder
[ 4733.391238] dell-wmi: Received unknown WMI event (0x11)
[ 6025.385179] cdrom: This disc doesn't have any tracks I recognize!
Quoted 4 lines

Nothing's changed in dell-wmi in that timeframe, so I suspect it's some other issue that's triggering here and the hardware is responding by sending events? Alternatively, these messages are pretty spread out. Do they directly correspond to you trying to burn something?

it's actually right after inserting a disc on the drive. I'll try switching to AHCI on BIOS and see if it works fine.

Signature · 1 line
balbi
#4 lore raw
Quoted 8 lines · Felipe Balbi
Quoted 5 lines

Nothing's changed in dell-wmi in that timeframe, so I suspect it's some other issue that's triggering here and the hardware is responding by sending events? Alternatively, these messages are pretty spread out. Do they directly correspond to you trying to burn something?

it's actually right after inserting a disc on the drive. I'll try switching to AHCI on BIOS and see if it works fine.

And that message isn't generated in .37?

Signature · 1 line
Matthew Garrett | [email protected]
#5 lore raw
Quoted 11 lines · Matthew Garrett
Quoted 8 lines · Felipe Balbi
Quoted 5 lines

Nothing's changed in dell-wmi in that timeframe, so I suspect it's some other issue that's triggering here and the hardware is responding by sending events? Alternatively, these messages are pretty spread out. Do they directly correspond to you trying to burn something?

it's actually right after inserting a disc on the drive. I'll try switching to AHCI on BIOS and see if it works fine.

And that message isn't generated in .37?

nope. dmesg is clean.

Signature · 1 line
balbi
#6 lore raw
Quoted 8 lines · Felipe Balbi
Quoted 7 lines · Matthew Garrett
Quoted 6 lines · Felipe Balbi
Quoted 5 lines

Nothing's changed in dell-wmi in that timeframe, so I suspect it's some other issue that's triggering here and the hardware is responding by sending events? Alternatively, these messages are pretty spread out. Do they directly correspond to you trying to burn something?

Quoted 6 lines
Quoted 4 lines
Quoted 2 lines

it's actually right after inserting a disc on the drive. I'll try switching to AHCI on BIOS and see if it works fine.

And that message isn't generated in .37?

nope. dmesg is clean.

Hm. I'd still lean towards blaming something in the ata layer - I can't see any way that dell-wmi could be directly involved, and it's primarily just a mechanism for the firmware to report events to the OS.

Signature · 1 line
Matthew Garrett | [email protected]
#7 lore raw

Hi,

Quoted 12 lines · Matthew Garrett
Quoted 11 lines · Felipe Balbi
Quoted 10 lines · Matthew Garrett
Quoted 8 lines · Felipe Balbi
Quoted 5 lines

Nothing's changed in dell-wmi in that timeframe, so I suspect it's some other issue that's triggering here and the hardware is responding by sending events? Alternatively, these messages are pretty spread out. Do they directly correspond to you trying to burn something?

it's actually right after inserting a disc on the drive. I'll try switching to AHCI on BIOS and see if it works fine.

Quoted 7 lines
Quoted 3 lines
Quoted 1 line

And that message isn't generated in .37?

nope. dmesg is clean.

Hm. I'd still lean towards blaming something in the ata layer - I can't see any way that dell-wmi could be directly involved, and it's primarily just a mechanism for the firmware to report events to the OS.

ok, should we add more people to Cc then ?

Signature · 1 line
balbi
#8 lore raw
Quoted 1 line

ok, should we add more people to Cc then ?

Can you check by blacklisting dell-wmi and verifying that you still can't burn?

Signature · 1 line
Matthew Garrett | [email protected]
#9 lore raw
Quoted 4 lines · Matthew Garrett
Quoted 1 line

ok, should we add more people to Cc then ?

Can you check by blacklisting dell-wmi and verifying that you still can't burn?

it's the same. I also got the same messages on 2.6.37 after inserting a second disk but still was able to burn the disc, so I don't think dell-wmi is to blame here, like you said before.

Signature · 1 line
balbi