devfs Gpio and interrupt

I read gpio.txt in Documentation of kernel and try to use it.

I use:

# echo 13 > /sys/class/gpio/export
# echo in > /root/tasto1/direction 
# cat /root/tasto1/direction
in

# cat /root/tasto1/value 
1

when the button is pressed:

# cat /root/tasto1/value 
0

# cat /root/tasto1/edge 
none
# echo both > /root/tasto1/edge 

# cat /sys/kernel/debug/gpio 
[...]
 B5 gpio-13  (sysfs       ) in  hi irq-77 edge-both
[...]

# cat /proc/irq/77/spurious p
count 15
unhandled 0
last_unhandled 0 ms
cat: p: No such file or directory
Ture:~# cat /proc/irq/77/spurious 
count 15
unhandled 0
last_unhandled 0 ms

I try the follow code in a while (1):

// /root/tasto1 is a symbolic link to /sys/class/gpio/gpio13/

pfd.fd = open("/root/tasto1/value", O_RDONLY);
pfd.events = POLLPRI | POLLERR;

//ready = poll(&pfd, 1, -1);
ready = poll(&pfd, 1, 100000);

lseek (pfd.fd, 0, SEEK_SET);

val = read(pfd.fd, buf, 254);
//the output are: 1, 10, 10
printf ("%d, %d, %d\n", ready, pfd.revents, pfd.events);

printf ("%d, %s\n", val, buf );

close(pfd.fd);

But it don't wait for an edge but they exit immediatly. Why? where is the problem?

Mancausoft - http://www.mancausoft.org/
GPG key: B53F90F2

My Bad!

now work:

pfd.fd = open("/root/ledverde/value", O_RDWR );
while (1)
{
pfd.events = POLLPRI | POLLERR; // | POLLWRBAND;

lseek (pfd.fd, 0, SEEK_SET);

val = read(pfd.fd, buf, 254);
buf[val] = 0;
//printf ("%d, %s\n", val, buf );

ready = poll(&pfd, 1, -1);
printf("%d\n", ++i);
}

Mancausoft - http://www.mancausoft.org/
GPG key: B53F90F2