tuner: Remove remaining usages of T_DIGITAL_TV

index d95f3b2..efcbc3e 100644
@@ -933,7 +933,7 @@ static int generic_set_freq(struct dvb_frontend *fe, u32 freq /* in HZ */,
 	 * that xc2028 will be in a safe state.
 	 * Maybe this might also be needed for DTV.
 	 */
-	if (new_mode == T_ANALOG_TV) {
+	if (new_mode == V4L2_TUNER_ANALOG_TV) {
 		rc = send_seq(priv, {0x00, 0x00});
 
 		/* Analog modes require offset = 0 */

@@ -1054,7 +1054,7 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe,
 		if (priv->ctrl.input1)
 			type |= INPUT1;
 		return generic_set_freq(fe, (625l * p->frequency) / 10,
-				T_RADIO, type, 0, 0);
+				V4L2_TUNER_RADIO, type, 0, 0);
 	}
 
 	/* if std is not defined, choose one */

@@ -1069,7 +1069,7 @@ static int xc2028_set_analog_freq(struct dvb_frontend *fe,
 	p->std |= parse_audio_std_option();
 
 	return generic_set_freq(fe, 62500l * p->frequency,
-				T_ANALOG_TV, type, p->std, 0);
+				V4L2_TUNER_ANALOG_TV, type, p->std, 0);
 }
 
 static int xc2028_set_params(struct dvb_frontend *fe,

@@ -1174,7 +1174,7 @@ static int xc2028_set_params(struct dvb_frontend *fe,
 	}
 
 	return generic_set_freq(fe, p->frequency,
-				T_DIGITAL_TV, type, 0, demod);
+				V4L2_TUNER_DIGITAL_TV, type, 0, demod);
 }
 
 static int xc2028_sleep(struct dvb_frontend *fe)

index f34d524..b2e351c 100644
@@ -2227,7 +2227,7 @@ em28xx_v4l2_read(struct file *filp, char __user *buf, size_t count,
 	 */
 
 	if (fh->type == V4L2_BUF_TYPE_VIDEO_CAPTURE) {
-		if (res_locked(dev, EM28XX_RESOURCE_VIDEO))
+		if (res_get(dev, EM28XX_RESOURCE_VIDEO))
 			return -EBUSY;
 
 		return videobuf_read_stream(&fh->vb_vidq, buf, count, pos, 0,

index 455038b..22a2222 100644
@@ -588,8 +588,6 @@ static void tm6000_config_tuner(struct tm6000_core *dev)
 	tun_setup.mode_mask = 0;
 	if (dev->caps.has_tuner)
 		tun_setup.mode_mask |= (T_ANALOG_TV | T_RADIO);
-	if (dev->caps.has_dvb)
-		tun_setup.mode_mask |= T_DIGITAL_TV;
 
 	switch (dev->tuner_type) {
 	case TUNER_XC2028:

index 32dfd5f..963e334 100644
@@ -161,7 +161,7 @@
 enum tuner_mode {
 	T_RADIO		= 1 << V4L2_TUNER_RADIO,
 	T_ANALOG_TV     = 1 << V4L2_TUNER_ANALOG_TV,
-	T_DIGITAL_TV    = 1 << V4L2_TUNER_DIGITAL_TV,
+	/* Don't need to map V4L2_TUNER_DIGITAL_TV, as tuner-core won't use it */
 };
 
 /* Older boards only had a single tuner device. Nowadays multiple tuner

index 959d690..e927d25 100644
@@ -737,27 +737,6 @@ static int tvp5150_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 static int tvp5150_reset(struct v4l2_subdev *sd, u32 val)
 {
 	struct tvp5150 *decoder = to_tvp5150(sd);
-	u8 msb_id, lsb_id, msb_rom, lsb_rom;
-
-	msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
-	lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
-	msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
-	lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
-
-	if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
-		v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
-
-		/* ITU-T BT.656.4 timing */
-		tvp5150_write(sd, TVP5150_REV_SELECT, 0);
-	} else {
-		if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
-			v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
-		} else {
-			v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
-					msb_id, lsb_id);
-			v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
-		}
-	}
 
 	/* Initializes TVP5150 to its default values */
 	tvp5150_write_inittab(sd, tvp5150_init_default);

@@ -977,6 +956,7 @@ static int tvp5150_probe(struct i2c_client *c,
 {
 	struct tvp5150 *core;
 	struct v4l2_subdev *sd;
+	u8 msb_id, lsb_id, msb_rom, lsb_rom;
 
 	/* Check if the adapter supports the needed features */
 	if (!i2c_check_functionality(c->adapter,

@@ -992,6 +972,26 @@ static int tvp5150_probe(struct i2c_client *c,
 	v4l_info(c, "chip found @ 0x%02x (%s)\n",
 		 c->addr << 1, c->adapter->name);
 
+	msb_id = tvp5150_read(sd, TVP5150_MSB_DEV_ID);
+	lsb_id = tvp5150_read(sd, TVP5150_LSB_DEV_ID);
+	msb_rom = tvp5150_read(sd, TVP5150_ROM_MAJOR_VER);
+	lsb_rom = tvp5150_read(sd, TVP5150_ROM_MINOR_VER);
+
+	if (msb_rom == 4 && lsb_rom == 0) { /* Is TVP5150AM1 */
+		v4l2_info(sd, "tvp%02x%02xam1 detected.\n", msb_id, lsb_id);
+
+		/* ITU-T BT.656.4 timing */
+		tvp5150_write(sd, TVP5150_REV_SELECT, 0);
+	} else {
+		if (msb_rom == 3 || lsb_rom == 0x21) { /* Is TVP5150A */
+			v4l2_info(sd, "tvp%02x%02xa detected.\n", msb_id, lsb_id);
+		} else {
+			v4l2_info(sd, "*** unknown tvp%02x%02x chip detected.\n",
+					msb_id, lsb_id);
+			v4l2_info(sd, "*** Rom ver is %d.%d\n", msb_rom, lsb_rom);
+		}
+	}
+
 	core->norm = V4L2_STD_ALL;	/* Default is autodetect */
 	core->input = TVP5150_COMPOSITE1;
 	core->enable = 1;

index b2e351c..19b8284 100644
@@ -1452,7 +1452,7 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 			rc = em28xx_audio_analog_set(dev);
 		}
 	}
-	return rc;
+	return (rc < 0) ? rc : 0;
 }
 
 static int vidioc_g_tuner(struct file *file, void *priv,

index 19b8284..23e7742 100644
@@ -1387,6 +1387,27 @@ static int vidioc_queryctrl(struct file *file, void *priv,
 		return -EINVAL;
 }
 
+/*
+ * FIXME: This is an indirect way to check if a control exists at a
+ * subdev. Instead of that hack, maybe the better would be to change all
+ * subdevs to return -ENOIOCTLCMD, if an ioctl is not supported.
+ */
+static int check_subdev_ctrl(struct em28xx *dev, int id)
+{
+	struct v4l2_queryctrl qc;
+
+	memset(&qc, 0, sizeof(qc));
+	qc.id = id;
+
+	/* enumerate V4L2 device controls */
+	v4l2_device_call_all(&dev->v4l2_dev, 0, core, queryctrl, &qc);
+
+	if (qc.type)
+		return 0;
+	else
+		return -EINVAL;
+}
+
 static int vidioc_g_ctrl(struct file *file, void *priv,
 				struct v4l2_control *ctrl)
 {

@@ -1399,7 +1420,6 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 		return rc;
 	rc = 0;
 
-
 	/* Set an AC97 control */
 	if (dev->audio_mode.ac97 != EM28XX_NO_AC97)
 		rc = ac97_get_ctrl(dev, ctrl);

@@ -1408,6 +1428,9 @@ static int vidioc_g_ctrl(struct file *file, void *priv,
 
 	/* It were not an AC97 control. Sends it to the v4l2 dev interface */
 	if (rc == 1) {
+		if (check_subdev_ctrl(dev, ctrl->id))
+			return -EINVAL;
+
 		v4l2_device_call_all(&dev->v4l2_dev, 0, core, g_ctrl, ctrl);
 		rc = 0;
 	}

@@ -1434,8 +1457,10 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
 
 	/* It isn't an AC97 control. Sends it to the v4l2 dev interface */
 	if (rc == 1) {
-		rc = v4l2_device_call_until_err(&dev->v4l2_dev, 0, core, s_ctrl, ctrl);
-
+		rc = check_subdev_ctrl(dev, ctrl->id);
+		if (!rc)
+			v4l2_device_call_all(&dev->v4l2_dev, 0,
+					     core, s_ctrl, ctrl);
 		/*
 		 * In the case of non-AC97 volume controls, we still need
 		 * to do some setups at em28xx, in order to mute/unmute