Skip to contentSkip to conversation

SC16is752 I2c driver

DISCUSSION Pete Murray 4 participants 4 messages Feb 22, 2011 – Feb 23, 2011 TTY layer and serial drivers

lore
Share & tools
lore
#0 lore raw

Hello,

I wrote an I2C driver for the SC16is752 dual Uart chip, I see there is an SPI version now. There was no SPI version when I was developing, if there was I would have tried to add I2C support to that driver instead. Is this something I should post for review, or should I work on adding support to the existing SPI version?

Thanks
Pete

#1 lore raw
Quoted 7 lines · Pete Murray

Hello,

I wrote an I2C driver for the SC16is752 dual Uart chip, I see there is an SPI version now. There was no SPI version when I was developing, if there was I would have tried to add I2C support to that driver instead. Is this something I should post for review, or should I work on adding support to the existing SPI version?

Try adding support to the SPI version, it might be simpler.

thanks,

greg k-h

#2 lore raw
In reply to Pete Murray

Hello Manuel,

Am 22.02.2011 15:28, schrieb Pete Murray:

Quoted 10 lines

Hello,

I wrote an I2C driver for the SC16is752 dual Uart chip, I see there is an SPI version now. There was no SPI version when I was developing, if there was I would have tried to add I2C support to that driver instead. Is this something I should post for review, or should I work on adding support to the existing SPI version?
Thanks
Pete

do you have an updated version of your SC16IS752 driver, so that Pete can add his I2C part?

Regards,
Thomas

#3 lore raw
Quoted 14 lines · Thomas Weber

Hello Manuel,

Am 22.02.2011 15:28, schrieb Pete Murray:

Quoted 10 lines

Hello,

I wrote an I2C driver for the SC16is752 dual Uart chip, I see there is an SPI version now. There was no SPI version when I was developing, if there was I would have tried to add I2C support to that driver instead. Is this something I should post for review, or should I work on adding support to the existing SPI version?
Thanks
Pete

Quoted 2 lines

do you have an updated version of your SC16IS752 driver, so that Pete can add his I2C part?

My latest version is the one from 7th February 2011 that was posted on linux-serial.

Regards,

Signature · 16 lines
Manuel Stahl
Fraunhofer-Institut IIS
Leistungsoptimierte Systeme

Nordostpark 93
D90411 Nürnberg
Telefon  +49 (0)911/58061-6419
Fax      +49 (0)911/58061-6398
E-Mail   [email protected]

http://www.iis.fraunhofer.de
http://www.smart-power.fraunhofer.de
--
To unsubscribe from this list: send the line "unsubscribe linux-serial" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html