Skip to contentSkip to conversation

hptiop: Add new PCI device ID

PATCH New HighPoint Linux Team 2 participants 3 messages Feb 12, 2009 – Mar 8, 2011

Subsystems (2)
SCSI Highpoint rocketraid 3xxx RAID driver
lore
Share & tools
lore

HighPoint Linux Team

author maintainer
#0 lore raw

PATCH 1/1 hptiop: Add new PCI device ID

Add a new PCI device ID.

Signed-off-by HighPoint Linux Team <[email protected]>

---

 hptiop.c |    1 +
 1 file changed, 1 insertion(+)
drivers/scsi/hptiop.c +1 -0
diff -purN linux-2.6.28-rc2-mm1/drivers/scsi/hptiop.c new/drivers/scsi/hptiop.c
@@ -1251,6 +1251,7 @@ static struct pci_device_id hptiop_id_ta
 	{ PCI_VDEVICE(TTI, 0x3530), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x3560), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4322), (kernel_ulong_t)&hptiop_itl_ops },
+	{ PCI_VDEVICE(TTI, 0x4321), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4210), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4211), (kernel_ulong_t)&hptiop_itl_ops },
 	{ PCI_VDEVICE(TTI, 0x4310), (kernel_ulong_t)&hptiop_itl_ops },
author maintainer
#1 lore raw

PATCH 1/1 mvsas: Add support for HighPoint RR27xx series HBA

This patch is to add support for HighPoint RR27xx SAS/SATA HBA which is based on Marvell 88SE9480 chipset.

Signed-off-by HighPoint Linux Team <[email protected]>
 drivers/scsi/mvsas/mv_init.c |    7 +++++++
 1 file changed, 7 insertions(+)
drivers/scsi/mvsas/mv_init.c +7 -0
diff -urN linux-2.6.37.orig/drivers/scsi/mvsas/mv_init.c linux-2.6.37/drivers/scsi/mvsas/mv_init.c
@@ -663,6 +663,13 @@
 	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1300), chip_1300 },
 	{ PCI_VDEVICE(ARECA, PCI_DEVICE_ID_ARECA_1320), chip_1320 },
 	{ PCI_VDEVICE(ADAPTEC2, 0x0450), chip_6440 },
+	{ PCI_VDEVICE(TTI, 0x2710), chip_9480 },
+	{ PCI_VDEVICE(TTI, 0x2720), chip_9480 },
+	{ PCI_VDEVICE(TTI, 0x2721), chip_9480 },
+	{ PCI_VDEVICE(TTI, 0x2722), chip_9480 },
+	{ PCI_VDEVICE(TTI, 0x2740), chip_9480 },
+	{ PCI_VDEVICE(TTI, 0x2744), chip_9480 },
+	{ PCI_VDEVICE(TTI, 0x2760), chip_9480 },
 
 	{ }	/* terminate list */
 };
#2 lore raw

Re: [PATCH][SCSI] mvsas: Add support for HighPoint RR27xx series HBA

Hi folks,

Quoted 1 line · HighPoint Linux Team

This patch is to add support for HighPoint RR27xx SAS/SATA HBA which is based on Marvell 88SE9480 chipset.

Any chance of getting this merged soon? I've been using a similar patch with my HighPoint cards on 2.6.37 for a while now with good results.

-ben