Occasional link flap on Intel 82599 on boot in XAUI mode
Subsystems (2)
We have a custom system with dual 82599's in XAUI mode. One has its pair of ports connected to a 10G switch, the other has its pair of ports connected to an FPGA.
Occasionally, on any of the interfaces, we will see the links flapping up and down when the system initially boots. This happens maybe one in 20 boots.
Feb 23 14:58:10 mfg kernel: [ 594.254977] ixgbe: eth1 NIC Link is Down Feb 23 14:58:12 mfg kernel: [ 596.230039] ixgbe: eth1 NIC Link is Up 10 Gbps, Flow Control: RX/TX Feb 23 14:58:12 mfg kernel: [ 596.256537] ixgbe: eth1 NIC Link is Down Feb 23 14:58:16 mfg kernel: [ 600.228096] ixgbe: eth1 NIC Link is Up 10 Gbps, Flow Control: RX/TX Feb 23 14:58:16 mfg kernel: [ 600.240135] ixgbe: eth1 NIC Link is Down Feb 23 14:58:18 mfg kernel: [ 602.227047] ixgbe: eth1 NIC Link is Up 10 Gbps, Flow Control: RX/TX
Simply forcing a down/up on the interface seems to correct the problem:
ip link set eth1 down
ip link set eth1 up
Is anyone else using XAUI mode and has seen this? Here is the kernel information that we are using currently:
Linux sprint.labnet.local 2.6.32.28-bps #1 SMP PREEMPT Mon Jan 31 16:05:50 CST 2011 x86_64 GNU/Linux
Feb 23 14:48:24 mfg kernel: [ 3.488664] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Feb 23 14:48:24 mfg kernel: [ 3.495082] Copyright (c) 1999-2006 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.500238] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 Feb 23 14:48:24 mfg kernel: [ 3.506138] e1000e: Copyright (c) 1999-2008 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.511988] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 Feb 23 14:48:24 mfg kernel: [ 3.518666] Copyright (c) 2007-2009 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.523817] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.44-k2 Feb 23 14:48:24 mfg kernel: [ 3.531622] ixgbe: Copyright (c) 1999-2009 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.537365] ixgbe 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 Feb 23 14:48:24 mfg kernel: [ 3.632934] ixgbe: 0000:01:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 3.643769] ixgbe 0000:01:00.0: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:67 Feb 23 14:48:24 mfg kernel: [ 3.651221] ixgbe 0000:01:00.0: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 3.669390] ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection Feb 23 14:48:24 mfg kernel: [ 3.675907] ixgbe 0000:01:00.1: PCI INT B -> GSI 47 (level, low) -> IRQ 47 Feb 23 14:48:24 mfg kernel: [ 3.771863] ixgbe: 0000:01:00.1: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 3.782699] ixgbe 0000:01:00.1: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:64 Feb 23 14:48:24 mfg kernel: [ 3.790151] ixgbe 0000:01:00.1: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 3.808314] ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection Feb 23 14:48:24 mfg kernel: [ 3.814831] ixgbe 0000:02:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 Feb 23 14:48:24 mfg kernel: [ 3.910802] ixgbe: 0000:02:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 3.921636] ixgbe 0000:02:00.0: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:52 Feb 23 14:48:24 mfg kernel: [ 3.929087] ixgbe 0000:02:00.0: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 3.947246] ixgbe 0000:02:00.0: Intel(R) 10 Gigabit Network Connection Feb 23 14:48:24 mfg kernel: [ 3.953761] ixgbe 0000:02:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36 Feb 23 14:48:24 mfg kernel: [ 4.049731] ixgbe: 0000:02:00.1: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 4.060566] ixgbe 0000:02:00.1: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:53 Feb 23 14:48:24 mfg kernel: [ 4.068018] ixgbe 0000:02:00.1: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 4.086179] ixgbe 0000:02:00.1: Intel(R) 10 Gigabit Network Connection
Quoted 95 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Brent Cook
Sent: Friday, February 25, 2011 8:12 AM
To: [email protected]
Subject: Occasional link flap on Intel 82599 on boot in XAUI modeWe have a custom system with dual 82599's in XAUI mode. One has its pair of ports connected to a 10G switch, the other has its pair of ports connected to an FPGA.
Occasionally, on any of the interfaces, we will see the links flapping up and down when the system initially boots. This happens maybe one in 20 boots.
Feb 23 14:58:10 mfg kernel: [ 594.254977] ixgbe: eth1 NIC Link is Down Feb 23 14:58:12 mfg kernel: [ 596.230039] ixgbe: eth1 NIC Link is Up 10 Gbps, Flow Control: RX/TX Feb 23 14:58:12 mfg kernel: [ 596.256537] ixgbe: eth1 NIC Link is Down Feb 23 14:58:16 mfg kernel: [ 600.228096] ixgbe: eth1 NIC Link is Up 10 Gbps, Flow Control: RX/TX Feb 23 14:58:16 mfg kernel: [ 600.240135] ixgbe: eth1 NIC Link is Down Feb 23 14:58:18 mfg kernel: [ 602.227047] ixgbe: eth1 NIC Link is Up 10Gbps, Flow Control: RX/TX
Simply forcing a down/up on the interface seems to correct the problem:
ip link set eth1 down
ip link set eth1 upIs anyone else using XAUI mode and has seen this? Here is the kernel information that we are using currently:
Linux sprint.labnet.local 2.6.32.28-bps #1 SMP PREEMPT Mon Jan 31 16:05:50 CST 2011
x86_64GNU/LinuxFeb 23 14:48:24 mfg kernel: [ 3.488664] Intel(R) PRO/1000 Network Driver - version 7.3.21-k5-NAPI Feb 23 14:48:24 mfg kernel: [ 3.495082] Copyright (c) 1999-2006 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.500238] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 Feb 23 14:48:24 mfg kernel: [ 3.506138] e1000e: Copyright (c) 1999- 2008 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.511988] Intel(R) Gigabit Ethernet Network Driver - version 1.3.16-k2 Feb 23 14:48:24 mfg kernel: [ 3.518666] Copyright (c) 2007-2009 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.523817] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 2.0.44-k2 Feb 23 14:48:24 mfg kernel: [ 3.531622] ixgbe: Copyright (c) 1999- 2009 Intel Corporation. Feb 23 14:48:24 mfg kernel: [ 3.537365] ixgbe 0000:01:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 Feb 23 14:48:24 mfg kernel: [ 3.632934] ixgbe: 0000:01:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 3.643769] ixgbe 0000:01:00.0: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:67 Feb 23 14:48:24 mfg kernel: [ 3.651221] ixgbe 0000:01:00.0: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 3.669390] ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection Feb 23 14:48:24 mfg kernel: [ 3.675907] ixgbe 0000:01:00.1: PCI INT B -> GSI 47 (level, low) -> IRQ 47 Feb 23 14:48:24 mfg kernel: [ 3.771863] ixgbe: 0000:01:00.1: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 3.782699] ixgbe 0000:01:00.1: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:64 Feb 23 14:48:24 mfg kernel: [ 3.790151] ixgbe 0000:01:00.1: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 3.808314] ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection Feb 23 14:48:24 mfg kernel: [ 3.814831] ixgbe 0000:02:00.0: PCI INT A -> GSI 35 (level, low) -> IRQ 35 Feb 23 14:48:24 mfg kernel: [ 3.910802] ixgbe: 0000:02:00.0: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 3.921636] ixgbe 0000:02:00.0: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:52 Feb 23 14:48:24 mfg kernel: [ 3.929087] ixgbe 0000:02:00.0: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 3.947246] ixgbe 0000:02:00.0: Intel(R) 10 Gigabit Network Connection Feb 23 14:48:24 mfg kernel: [ 3.953761] ixgbe 0000:02:00.1: PCI INT B -> GSI 36 (level, low) -> IRQ 36 Feb 23 14:48:24 mfg kernel: [ 4.049731] ixgbe: 0000:02:00.1: ixgbe_init_interrupt_scheme: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 Feb 23 14:48:24 mfg kernel: [ 4.060566] ixgbe 0000:02:00.1: (PCI Express:5.0Gb/s:Width x8) 00:12:34:56:78:53 Feb 23 14:48:24 mfg kernel: [ 4.068018] ixgbe 0000:02:00.1: MAC: 2, PHY: 0, PBA No: ffffff-0ff Feb 23 14:48:24 mfg kernel: [ 4.086179] ixgbe 0000:02:00.1: Intel(R)
Quoted 5 lines
10 Gigabit Network Connection
--
To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
By any chance have you tried it with a newer driver? Latest Source Forge is 3.2.9.
Also do you only see this link flap on boot, can you recreate the flap by unload and loading the ixgbe module?
Thanks,
-Don Skidmore <[email protected]>
Quoted 30 lines · Donald C
Quoted 30 lines
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Brent Cook
Sent: Friday, February 25, 2011 8:12 AM
To: [email protected]
Subject: Occasional link flap on Intel 82599 on boot in XAUI modeWe have a custom system with dual 82599's in XAUI mode. One has its pair of ports connected to a 10G switch, the other has its pair of ports connected to an FPGA.
Occasionally, on any of the interfaces, we will see the links flapping up and down when the system initially boots. This happens maybe one in 20 boots.
Feb 23 14:58:10 mfg kernel: [ 594.254977] ixgbe: eth1 NIC Link is Down Feb 23 14:58:12 mfg kernel: [ 596.230039] ixgbe: eth1 NIC Link is Up 10 Gbps, Flow Control: RX/TX Feb 23 14:58:12 mfg kernel: [ 596.256537] ixgbe: eth1 NIC Link is Down Feb 23 14:58:16 mfg kernel: [ 600.228096] ixgbe: eth1 NIC Link is Up 10 Gbps, Flow Control: RX/TX Feb 23 14:58:16 mfg kernel: [ 600.240135] ixgbe: eth1 NIC Link is Down Feb 23 14:58:18 mfg kernel: [ 602.227047] ixgbe: eth1 NIC Link is Up 10Gbps, Flow Control: RX/TX
Simply forcing a down/up on the interface seems to correct the problem:
ip link set eth1 down
ip link set eth1 up
Quoted 8 lines
Quoted 3 lines
Is anyone else using XAUI mode and has seen this? Here is the kernel information that we are using currently:
By any chance have you tried it with a newer driver? Latest Source Forge is 3.2.9.
Also do you only see this link flap on boot, can you recreate the flap by unload and loading the ixgbe module?
We updated to the latest source forge driver and had the same behavior. Reloading the driver does not reproduce the issue.
It seems to be related to the remote XAUI peer coming out of reset after the 82599. The FPGAs on one pair of links are loaded in software at boot time, and the switch reset is also delayed slightly compared to the 82599. We fixed the issue by doing 'ethtool -r' once for each link at boot time.
Thanks
- Brent