iwl3945: disable hw scan by default

After new NetworkManager 0.8.996 changes, hardware scanning is causing microcode errors as reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=683571
and sometimes kernel crashes:
https://bugzilla.redhat.com/show_bug.cgi?id=688252

Also with hw scan there are very bad performance on some systems as reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=671366

Since Intel no longer supports 3945, there is no chance to get proper firmware fixes, we need workaround problems by disable hardware scanning by default.

---
This patch should be also applied on .38-stable (on older kernels software scan have performance problems), but need manual backport due to driver split. I will post to stable when it gets mainline.

John, please post upstream ASAP, together with commit c24057cbcd7480602ece65be3f7e039499499007 "iwl3945: do not deprecate software scan"

 drivers/net/wireless/iwlegacy/iwl3945-base.c |    3 ++-
 1 files changed, 2 insertions(+), 1 deletions(-)

index b6c5209..28eb3d8 100644
@@ -93,6 +93,7 @@ MODULE_LICENSE("GPL");
 struct iwl_mod_params iwl3945_mod_params = {
 	.sw_crypto = 1,
 	.restart_fw = 1,
+	.disable_hw_scan = 1,
 	/* the rest are 0 by default */
 };
 

@@ -4279,7 +4280,7 @@ MODULE_PARM_DESC(swcrypto,
 		"using software crypto (default 1 [software])");
 module_param_named(disable_hw_scan, iwl3945_mod_params.disable_hw_scan,
 		int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 0)");
+MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
 #ifdef CONFIG_IWLWIFI_LEGACY_DEBUG
 module_param_named(debug, iwlegacy_debug_level, uint, S_IRUGO | S_IWUSR);
 MODULE_PARM_DESC(debug, "debug output mask");

1.7.1