Skip to contentSkip to conversation

ti-syslink: Add TI Syslink Common include file.

PATCH In review Siddharth Heroor 3 participants 13 messages Apr 9, 2011 – Apr 18, 2011

lore
Share & tools
lore
#0 lore raw

PATCH v3 1/5 ti-syslink: Add TI Syslink Common include file.

From: Siddharth Heroor <[email protected]>

* TI Syslink is an IPC layer for ARM-DSP Communication.
* Add a common include file for the different Syslink environment variables.

---
 recipes/ti/ti-syslink-common.inc |   25 +++++++++++++++++++++++++
 1 files changed, 25 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-common.inc
recipes/ti/ti-syslink-common.inc new file +25 -0
new file mode 100644
index 0000000..584fe8e
@@ -0,0 +1,25 @@
+# Define all enviroment variables required by syslink.
+
+SYSLINK_ROOT           ?= "${WORKDIR}/syslink_${PV}"
+SYSLINKHLOSSAMPLES     ?= "procMgr frameq gateMP heapBufMP heapMemMP listMP messageQ notify ringIO ringIO_gpp sharedRegion"
+SYSLINKPLATFORM        ?= "TI81XX"
+SYSLINKSUFFIX          ?= "xe674"
+SYSLINKLOADER          ?= "ELF"
+
+SYSLINKVARIANT_ti816x   = "TI816X"
+SYSLINKVARIANT_ti814x   = "TI814X"
+SYSLINKVARIANT         ?= "<UNDEFINED_SYSLINKVARIANT>"
+
+XDCTARGETS             ?= "ti.targets.elf.C674"
+XDCPATH                ?= "${IPC_INSTALL_DIR}/packages;${SYSBIOS_INSTALL_DIR}/packages" 
+XDCBUILDCFG            ?= "${SYSLINK_ROOT}/config.bld"
+
+export SYSLINK_ROOT
+export SYSLINKHLOSSAMPLES
+export SYSLINKPLATFORM
+export SYSLINKSUFFIX
+export SYSLINKLOADER
+export SYSLINKVARIANT
+export XDCTARGETS
+export XDCPATH
+export XDCBUILDCFG
Signature · 1 line
1.7.0.4
#1 lore raw

PATCH v3 2/5 ti-syslink: Add include file for Syslink Module.

From: Siddharth Heroor <[email protected]>

* Add Syslink Kernel Module include file for TI816x and TI814x device families.

---
 recipes/ti/ti-syslink-module.inc |   31 +++++++++++++++++++++++++++++++
 1 files changed, 31 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-module.inc
recipes/ti/ti-syslink-module.inc new file +31 -0
new file mode 100644
index 0000000..10c2d6e
@@ -0,0 +1,31 @@
+DESCRIPTION = "SYSLINK Inter-Processor Communications (IPC) Kernel module for TI ARM/DSP processors"
+HOMEPAGE = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/syslink/index.html"
+SECTION = "devel"
+LICENSE = "BSD"
+
+COMPATIBLE_MACHINE = "(ti816x|ti814x)"
+
+require ti-paths.inc
+require ti-staging.inc
+require ti-syslink-common.inc
+
+inherit module
+
+S = "${WORKDIR}/syslink_${PV}/ti/syslink/utils/hlos/knl/Linux"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}/exports/syslink_${PV}.tar.gz;name=syslinktarball"
+
+DEPENDS =+ "ti-ipc"
+
+EXTRA_OEMAKE = "ARCH='${TARGET_ARCH}' \
+    CROSS_COMPILE='${TARGET_PREFIX}' \
+    SYSLINK_PLATFORM='${SYSLINKPLATFORM}' \
+    SYSLINK_VARIANT='${SYSLINKVARIANT}' \
+    SYSLINK_LOADER='${SYSLINKLOADER}' \
+    SYSLINK_PKGPATH='${IPC_INSTALL_DIR}/packages' \
+    KDIR='${STAGING_KERNEL_DIR}'"
+
+do_install () {
+    install -d ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp
+    install -m 0755 ${SYSLINK_ROOT}/ti/syslink/bin/${SYSLINKVARIANT}/syslink.ko ${D}/lib/modules/${KERNEL_VERSION}/kernel/drivers/dsp/
+}
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH v3 3/5 ti-syslink: Add include file for Syslink Libraries.

In reply to Siddharth Heroor

From: Siddharth Heroor <[email protected]>

* Add Syslink libraries for TI816x and TI814x device families.
* Build and stage both Linux and DSP side library files.

---
 recipes/ti/ti-syslink-libs.inc |   45 ++++++++++++++++++++++++++++++++++++++++
 1 files changed, 45 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-libs.inc
recipes/ti/ti-syslink-libs.inc new file +45 -0
new file mode 100644
index 0000000..fff36b6
@@ -0,0 +1,45 @@
+DESCRIPTION = "SYSLINK Inter-Processor Communications (IPC) libraries for TI ARM/DSP processors"
+HOMEPAGE = "http://software-dl.ti.com/dsps/dsps_public_sw/sdo_sb/targetcontent/syslink/index.html"
+SECTION = "devel"
+LICENSE = "BSD"
+
+COMPATIBLE_MACHINE = "(ti816x|ti814x)"
+
+require ti-paths.inc
+require ti-staging.inc
+require ti-syslink-common.inc
+
+S = "${WORKDIR}/syslink_${PV}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}/exports/syslink_${PV}.tar.gz;name=syslinktarball"
+
+DEPENDS = "ti-sysbios ti-xdctools ti-cgt6x ti-ipc"
+
+EXTRA_OEMAKE = "ARCH='${TARGET_ARCH}' \
+    CROSS_COMPILE='${TARGET_PREFIX}' \
+    SYSLINK_PLATFORM='${SYSLINKPLATFORM}' \
+    SYSLINK_VARIANT='${SYSLINKVARIANT}' \
+    SYSLINK_LOADER='${SYSLINKLOADER}' \
+    SYSLINK_PKGPATH='${IPC_INSTALL_DIR}/packages' \
+    KDIR='${STAGING_KERNEL_DIR}'"
+
+do_compilexdc() {
+    cd ${S}/ti/syslink 
+    ${XDC_INSTALL_DIR}/xdc .make -PR .
+    ${XDC_INSTALL_DIR}/xdc clean -PR .
+    ${XDC_INSTALL_DIR}/xdc .interfaces -PR .
+    ${XDC_INSTALL_DIR}/xdc -PR . 
+}
+
+addtask compilexdc after do_configure before do_compile
+
+do_compile() {
+    cd ${S}/ti/syslink/utils/hlos/usr/Linux
+    oe_runmake
+}
+
+do_install () {
+    # Install/Stage the Source Tree
+    install -d ${D}${SYSLINK_INSTALL_DIR_RECIPE}
+    cp -pPrf ${S}/* ${D}${SYSLINK_INSTALL_DIR_RECIPE}
+}
Signature · 1 line
1.7.0.4
#3 lore raw

PATCH v3 4/5 ti-syslink-module: Add Syslink version 02.00.00.68 Beta1

In reply to Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...-syslink-module_02.00.00.67+02.00.00.68beta1.bb |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb
recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb new file +11 -0
new file mode 100644
index 0000000..f7bcb35
@@ -0,0 +1,11 @@
+require ti-syslink-module.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}/ti/syslink/utils/hlos/knl/Linux"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
Signature · 1 line
1.7.0.4
#4 lore raw

Re: [PATCHv3 4/5] ti-syslink-module: Add Syslink version 02.00.00.68 Beta1

Quoted 8 lines · Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...-syslink-module_02.00.00.67+02.00.00.68beta1.bb |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb

Sid,

Renaming the file with the proper versioning doesn't do any good, when you set the actual PV inside the recipe to the wrong value anyway - bitbake and opkg will sort by PV and not the recipe name! Hence, you are setting the version to 02_00_00_68 and what happens when the real 02_00_00_68 gets released?

I did some quick editing and will send the updated patches for #4 and #5 - please review and provide feedback. Thanks.

Signature · 1 line
Denys
Quoted 25 lines
recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb new file +11 -0
new file mode 100644
index 0000000..f7bcb35
@@ -0,0 +1,11 @@
+require ti-syslink-module.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}/ti/syslink/utils/hlos/knl/Linux"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
Signature · 7 lines
1.7.0.4


_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
#5 lore raw

PATCH v4 4/5 ti-syslink-module: Add Syslink version 02.00.00.68 Beta1

From: Siddharth Heroor <[email protected]>

---
 ...syslink-module_02.00.00.67+02.00.00.68-beta1.bb |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68-beta1.bb
recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68-beta1.bb new file +11 -0
new file mode 100644
index 0000000..723969d
@@ -0,0 +1,11 @@
+require ti-syslink-module.inc
+
+SYSLINKVER = "02_00_00_68_beta1"
+PV = "02_00_00_67+02_00_00_68-beta1"
+
+S = "${WORKDIR}/syslink_${SYSLINKVER}/ti/syslink/utils/hlos/knl/Linux"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${SYSLINKVER}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${SYSLINKVER}/exports/syslink_${SYSLINKVER}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
Signature · 1 line
1.7.0.4
#6 lore raw

Re: [PATCHv3 4/5] ti-syslink-module: Add Syslink version 02.00.00.68 Beta1

In reply to Denys Dmytriyenko
Quoted 10 lines · Denys Dmytriyenko
Quoted 8 lines · Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...-syslink-module_02.00.00.67+02.00.00.68beta1.bb |   11 +++++++++++

 1 files changed, 11 insertions(+), 0 deletions(-)

 create mode 100644 recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb

Quoted 7 lines

Sid,

Renaming the file with the proper versioning doesn't do any good, when you set the actual PV inside the recipe to the wrong value anyway - bitbake and opkg will sort by PV and not the recipe name! Hence, you are setting the version to 02_00_00_68 and what happens when the real 02_00_00_68 gets released?

Hi Denys,

Thank you for correcting my understanding.

The next version of syslink is expected to be 02_00_00_69 Beta2. I don't think there will be
a 02_00_00_68_beta2. The version numbering followed by syslink appends beta1 to 02_00_00_68. In such a case, should the next version recipe be 02_00_00_68+02_00_00_69_beta2?

Quoted 37 lines

I did some quick editing and will send the updated patches for #4 and #5 - please review and provide feedback. Thanks.

--
Denys

Quoted 21 lines
recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb new file +11 -1
new file mode 100644
index 0000000..f7bcb35
@@ -0,0 +1,11 @@
+require ti-syslink-module.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}/ti/syslink/utils/hlos/knl/Linux"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
--

1.7.0.4

Quoted 4 lines

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 1 line
Sid
#7 lore raw

Re: [PATCHv3 4/5] ti-syslink-module: Add Syslink version 02.00.00.68 Beta1

Quoted 20 lines · Siddharth Heroor
Quoted 10 lines · Denys Dmytriyenko
Quoted 8 lines · Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...-syslink-module_02.00.00.67+02.00.00.68beta1.bb |   11 +++++++++++

 1 files changed, 11 insertions(+), 0 deletions(-)

 create mode 100644 recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb

Quoted 7 lines

Sid,

Renaming the file with the proper versioning doesn't do any good, when you set the actual PV inside the recipe to the wrong value anyway - bitbake and opkg will sort by PV and not the recipe name! Hence, you are setting the version to 02_00_00_68 and what happens when the real 02_00_00_68 gets released?

Hi Denys,

Quoted 7 lines

Thank you for correcting my understanding.

The next version of syslink is expected to be 02_00_00_69 Beta2. I don't think there will be
a 02_00_00_68_beta2. The version numbering followed by syslink appends beta1 to 02_00_00_68. In such a case, should the next version recipe be 02_00_00_68+02_00_00_69_beta2?

Sid,

Are you saying the versioning schema for this component is like this:

02_00_00_68_beta1
02_00_00_69_beta2
etc?

It's quite weird... Anyway, for proper sorting and ordering of versions, it's still recommended to use OE's versioning policy...

Signature · 1 line
Denys
Quoted 47 lines
Quoted 37 lines

I did some quick editing and will send the updated patches for #4 and #5 - please review and provide feedback. Thanks.

--
Denys

Quoted 21 lines
recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb new file +11 -1
new file mode 100644
index 0000000..f7bcb35
@@ -0,0 +1,11 @@
+require ti-syslink-module.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}/ti/syslink/utils/hlos/knl/Linux"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
--

1.7.0.4

Quoted 4 lines

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 6 lines
Sid

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel
#8 lore raw

Re: [PATCHv3 4/5] ti-syslink-module: Add Syslink version 02.00.00.68 Beta1

Quoted 31 lines · Denys Dmytriyenko
Quoted 20 lines · Siddharth Heroor
Quoted 10 lines · Denys Dmytriyenko
Quoted 8 lines · Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...-syslink-module_02.00.00.67+02.00.00.68beta1.bb |   11 +++++++++++

 1 files changed, 11 insertions(+), 0 deletions(-)

 create mode 100644 recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb

Quoted 7 lines

Sid,

Renaming the file with the proper versioning doesn't do any good, when you set the actual PV inside the recipe to the wrong value anyway - bitbake and opkg will sort by PV and not the recipe name! Hence, you are setting the version to 02_00_00_68 and what happens when the real 02_00_00_68 gets released?

Hi Denys,

Quoted 7 lines

Thank you for correcting my understanding.

The next version of syslink is expected to be 02_00_00_69 Beta2. I don't think there will be
a 02_00_00_68_beta2. The version numbering followed by syslink appends beta1 to 02_00_00_68. In such a case, should the next version recipe be 02_00_00_68+02_00_00_69_beta2?

Sid,

Quoted 8 lines

Are you saying the versioning schema for this component is like this:

02_00_00_68_beta1
02_00_00_69_beta2
etc?

It's quite weird... Anyway, for proper sorting and ordering of versions, it's still recommended to use OE's versioning policy...

Hi Denys,

Yes, the versioning for this component is exactly how you point out. I will follow OE's versioning for any new versions I submit going forward.

Quoted 58 lines

--
Denys

Quoted 40 lines
Quoted 27 lines

I did some quick editing and will send the updated patches for #4 and #5 - please review and provide feedback. Thanks.

--
Denys

Quoted 21 lines
recipes/ti/ti-syslink-module_02.00.00.67+02.00.00.68beta1.bb new file +11 -1
new file mode 100644
index 0000000..f7bcb35
@@ -0,0 +1,11 @@
+require ti-syslink-module.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}/ti/syslink/utils/hlos/knl/Linux"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
--

1.7.0.4

Quoted 10 lines
Quoted 4 lines

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Quoted 7 lines

--
Sid

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

Signature · 1 line
Sid
#9 lore raw

PATCH v3 5/5 ti-syslink-libs: Add Syslink version 02.00.00.68 Beta1

In reply to Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb |   24 ++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb
recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb new file +24 -0
new file mode 100644
index 0000000..4a88f28
@@ -0,0 +1,24 @@
+require ti-syslink-libs.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
+
+do_configure() {
+    # Update config.bld
+    sed -i \
+        -e s:^C674_ELF.rootDir.*:C674_ELF.rootDir\ =\ \"${CODEGEN_INSTALL_DIR}\":g \
+        -e s:C64P_COFF,://C64P_COFF:g \
+        -e s:C64P_ELF,://C64P_ELF:g \
+        -e s:C674_COFF,://C674P_COFF:g \
+        -e s:M3_ELF,://M3_ELF:g \
+        -e s:A8_ELF$://A8_ELF:g \
+        ${S}/config.bld
+}
+
Signature · 1 line
1.7.0.4
#10 lore raw

Re: [PATCHv3 5/5] ti-syslink-libs: Add Syslink version 02.00.00.68 Beta1

This recipe includes a SRC URI that is not accessible for the public, why is that?

Quoted 48 lines · Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb |   24 ++++++++++++++++++++

 1 files changed, 24 insertions(+), 0 deletions(-)

 create mode 100644 recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb

recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb new file +24 -1
new file mode 100644
index 0000000..4a88f28
@@ -0,0 +1,24 @@
+require ti-syslink-libs.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
+
+do_configure() {
+    # Update config.bld
+    sed -i \
+        -e s:^C674_ELF.rootDir.*:C674_ELF.rootDir\ =\ \"${CODEGEN_INSTALL_DIR}\":g \
+        -e s:C64P_COFF,://C64P_COFF:g \
+        -e s:C64P_ELF,://C64P_ELF:g \
+        -e s:C674_COFF,://C674P_COFF:g \
+        -e s:M3_ELF,://M3_ELF:g \
+        -e s:A8_ELF$://A8_ELF:g \
+        ${S}/config.bld
+}
+
--

1.7.0.4

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

#11 lore raw

Re: [PATCHv3 5/5] ti-syslink-libs: Add Syslink version 02.00.00.68 Beta1

Quoted 2 lines · Xianghua Xiao

This recipe includes a SRC URI that is not accessible for the public, why is that?

Actually, it is publicly downloadable. How did you try it and what was the error message?

Signature · 1 line
Denys
Quoted 54 lines · Siddharth Heroor
Quoted 43 lines

From: Siddharth Heroor <[email protected]>

---
 ...ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb |   24 ++++++++++++++++++++

 1 files changed, 24 insertions(+), 0 deletions(-)

 create mode 100644 recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb

recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68beta1.bb new file +24 -1
new file mode 100644
index 0000000..4a88f28
@@ -0,0 +1,24 @@
+require ti-syslink-libs.inc
+
+PV = "02_00_00_68"
+PVExtra = "_beta1"
+
+S = "${WORKDIR}/syslink_${PV}${PVExtra}"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${PV}${PVExtra}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${PV}${PVExtra}/exports/syslink_${PV}${PVExtra}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
+
+do_configure() {
+    # Update config.bld
+    sed -i \
+        -e s:^C674_ELF.rootDir.*:C674_ELF.rootDir\ =\ \"${CODEGEN_INSTALL_DIR}\":g \
+        -e s:C64P_COFF,://C64P_COFF:g \
+        -e s:C64P_ELF,://C64P_ELF:g \
+        -e s:C674_COFF,://C674P_COFF:g \
+        -e s:M3_ELF,://M3_ELF:g \
+        -e s:A8_ELF$://A8_ELF:g \
+        ${S}/config.bld
+}
+
--

1.7.0.4

Quoted 5 lines

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

_______________________________________________
Openembedded-devel mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/openembedded-devel

#12 lore raw

PATCH v4 5/5 ti-syslink-libs: Add Syslink version 02.00.00.68 Beta1

In reply to Siddharth Heroor

From: Siddharth Heroor <[email protected]>

---
 ...i-syslink-libs_02.00.00.67+02.00.00.68-beta1.bb |   23 ++++++++++++++++++++
 1 files changed, 23 insertions(+), 0 deletions(-)
 create mode 100644 recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68-beta1.bb
recipes/ti/ti-syslink-libs_02.00.00.67+02.00.00.68-beta1.bb new file +23 -0
new file mode 100644
index 0000000..a5ec783
@@ -0,0 +1,23 @@
+require ti-syslink-libs.inc
+
+SYSLINKVER = "02_00_00_68_beta1"
+PV = "02_00_00_67+02_00_00_68-beta1"
+
+S = "${WORKDIR}/syslink_${SYSLINKVER}"
+SYSLINK_ROOT = "${WORKDIR}/syslink_${SYSLINKVER}"
+
+SRC_URI = "http://software-dl.ti.com/dsps/dsps_public_sw/SysLink/${SYSLINKVER}/exports/syslink_${SYSLINKVER}.tar.gz;name=syslinktarball"
+SRC_URI[syslinktarball.md5sum] = "468034372124f70f82b60cfb5f11c8e8"
+SRC_URI[syslinktarball.sha256sum] = "ed574dcb3a5477cfbc69a1c9e768d5197291cb057d19fd791e16e1c89af3e8e1"
+
+do_configure() {
+    # Update config.bld
+    sed -i \
+        -e s:^C674_ELF.rootDir.*:C674_ELF.rootDir\ =\ \"${CODEGEN_INSTALL_DIR}\":g \
+        -e s:C64P_COFF,://C64P_COFF:g \
+        -e s:C64P_ELF,://C64P_ELF:g \
+        -e s:C674_COFF,://C674P_COFF:g \
+        -e s:M3_ELF,://M3_ELF:g \
+        -e s:A8_ELF$://A8_ELF:g \
+        ${S}/config.bld
+}
Signature · 1 line
1.7.0.4