Skip to contentSkip to conversation

no wireless interfaces?

Bridge [email protected] 2 participants 2 messages Apr 29, 2011 Ethernet bridge

lore
Share & tools
lore
#0 lore raw

I tried to bridge a wireless interface to a wired Ethernet interface, and it failed with "Operation not supported."

Looking at the kernel code, it seems like this is intentional. I noticed the following in br_add_if:

        /* No bridging devices that dislike that (e.g. wireless) */
        if (dev->priv_flags & IFF_DONT_BRIDGE)
                return -EOPNOTSUPP;

I'm curious to know why this is not supported.

Signature · 2 lines
---
Joe
#1 lore raw
Quoted 11 lines · On Fri, 29 Apr 2011 11:36:28 -0500 "[email protected]"…

I tried to bridge a wireless interface to a wired Ethernet interface, and it failed with "Operation not supported."

Looking at the kernel code, it seems like this is intentional. I noticed the following in br_add_if:

        /* No bridging devices that dislike that (e.g. wireless) */
        if (dev->priv_flags & IFF_DONT_BRIDGE)
                return -EOPNOTSUPP;

I'm curious to know why this is not supported.

See discussion on netdev. Basically without some form of MAC spoofing (NAT at level 2); it is not possible to bridge in station mode.