2.6.32.40-longterm review

@@ -195,6 +195,7 @@ static struct reg_dmn_pair_mapping regDo
 	{APL9_WORLD, CTL_ETSI, CTL_ETSI},
 
 	{APL3_FCCA, CTL_FCC, CTL_FCC},
+	{APL7_FCCA, CTL_FCC, CTL_FCC},
 	{APL1_ETSIC, CTL_FCC, CTL_ETSI},
 	{APL2_ETSIC, CTL_FCC, CTL_ETSI},
 	{APL2_APLD, CTL_FCC, NO_CTL},

@@ -440,8 +440,10 @@ int blk_register_queue(struct gendisk *d
 		return ret;
 
 	ret = kobject_add(&q->kobj, kobject_get(&dev->kobj), "%s", "queue");
-	if (ret < 0)
+	if (ret < 0) {
+		blk_trace_remove_sysfs(dev);
 		return ret;
+	}
 
 	kobject_uevent(&q->kobj, KOBJ_ADD);
 

@@ -703,7 +703,7 @@ int p54_tx_80211(struct ieee80211_hw *de
 	struct p54_tx_info *p54info;
 	struct p54_hdr *hdr;
 	struct p54_tx_data *txhdr;
-	unsigned int padding, len, extra_len;
+	unsigned int padding, len, extra_len = 0;
 	int i, j, ridx;
 	u16 hdr_flags = 0, aid = 0;
 	u8 rate, queue = 0, crypt_offset = 0;

@@ -3244,9 +3244,15 @@ static int device_notifier(struct notifi
 	if (!domain)
 		return 0;
 
-	if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through)
+	if (action == BUS_NOTIFY_UNBOUND_DRIVER && !iommu_pass_through) {
 		domain_remove_one_dev_info(domain, pdev);
 
+		if (!(domain->flags & DOMAIN_FLAG_VIRTUAL_MACHINE) &&
+		    !(domain->flags & DOMAIN_FLAG_STATIC_IDENTITY) &&
+		    list_empty(&domain->devices))
+			domain_exit(domain);
+	}
+
 	return 0;
 }
 

@@ -3393,6 +3399,11 @@ static void domain_remove_one_dev_info(s
 		domain->iommu_count--;
 		domain_update_iommu_cap(domain);
 		spin_unlock_irqrestore(&domain->iommu_lock, tmp_flags);
+
+		spin_lock_irqsave(&iommu->lock, tmp_flags);
+		clear_bit(domain->id, iommu->domain_ids);
+		iommu->domains[domain->id] = NULL;
+		spin_unlock_irqrestore(&iommu->lock, tmp_flags);
 	}
 
 	spin_unlock_irqrestore(&device_domain_lock, flags);

@@ -1858,7 +1858,7 @@ static struct dmar_domain *get_domain_fo
 
 	ret = iommu_attach_domain(domain, iommu);
 	if (ret) {
-		domain_exit(domain);
+		free_domain_mem(domain);
 		goto error;
 	}
 

@@ -126,7 +126,7 @@ static uint32_t atom_iio_execute(struct
 		case ATOM_IIO_MOVE_INDEX:
 			temp &=
 			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
-			      CU8(base + 2));
+			      CU8(base + 3));
 			temp |=
 			    ((index >> CU8(base + 2)) &
 			     (0xFFFFFFFF >> (32 - CU8(base + 1)))) << CU8(base +

@@ -136,7 +136,7 @@ static uint32_t atom_iio_execute(struct
 		case ATOM_IIO_MOVE_DATA:
 			temp &=
 			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
-			      CU8(base + 2));
+			      CU8(base + 3));
 			temp |=
 			    ((data >> CU8(base + 2)) &
 			     (0xFFFFFFFF >> (32 - CU8(base + 1)))) << CU8(base +

@@ -146,7 +146,7 @@ static uint32_t atom_iio_execute(struct
 		case ATOM_IIO_MOVE_ATTR:
 			temp &=
 			    ~((0xFFFFFFFF >> (32 - CU8(base + 1))) <<
-			      CU8(base + 2));
+			      CU8(base + 3));
 			temp |=
 			    ((ctx->
 			      io_attr >> CU8(base + 2)) & (0xFFFFFFFF >> (32 -

@@ -861,9 +861,10 @@ out:
 	return ret;
 }
 
-static void nfs_wcc_update_inode(struct inode *inode, struct nfs_fattr *fattr)
+static unsigned long nfs_wcc_update_inode(struct inode *inode, struct nfs_fattr *fattr)
 {
 	struct nfs_inode *nfsi = NFS_I(inode);
+	unsigned long ret = 0;
 
 	if ((fattr->valid & NFS_ATTR_FATTR_PRECHANGE)
 			&& (fattr->valid & NFS_ATTR_FATTR_CHANGE)

@@ -871,25 +872,32 @@ static void nfs_wcc_update_inode(struct
 		nfsi->change_attr = fattr->change_attr;
 		if (S_ISDIR(inode->i_mode))
 			nfsi->cache_validity |= NFS_INO_INVALID_DATA;
+		ret |= NFS_INO_INVALID_ATTR;
 	}
 	/* If we have atomic WCC data, we may update some attributes */
 	if ((fattr->valid & NFS_ATTR_FATTR_PRECTIME)
 			&& (fattr->valid & NFS_ATTR_FATTR_CTIME)
-			&& timespec_equal(&inode->i_ctime, &fattr->pre_ctime))
-			memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime));
+			&& timespec_equal(&inode->i_ctime, &fattr->pre_ctime)) {
+		memcpy(&inode->i_ctime, &fattr->ctime, sizeof(inode->i_ctime));
+		ret |= NFS_INO_INVALID_ATTR;
+	}
 
 	if ((fattr->valid & NFS_ATTR_FATTR_PREMTIME)
 			&& (fattr->valid & NFS_ATTR_FATTR_MTIME)
 			&& timespec_equal(&inode->i_mtime, &fattr->pre_mtime)) {
-			memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime));
-			if (S_ISDIR(inode->i_mode))
-				nfsi->cache_validity |= NFS_INO_INVALID_DATA;
+		memcpy(&inode->i_mtime, &fattr->mtime, sizeof(inode->i_mtime));
+		if (S_ISDIR(inode->i_mode))
+			nfsi->cache_validity |= NFS_INO_INVALID_DATA;
+		ret |= NFS_INO_INVALID_ATTR;
 	}
 	if ((fattr->valid & NFS_ATTR_FATTR_PRESIZE)
 			&& (fattr->valid & NFS_ATTR_FATTR_SIZE)
 			&& i_size_read(inode) == nfs_size_to_loff_t(fattr->pre_size)
-			&& nfsi->npages == 0)
-			i_size_write(inode, nfs_size_to_loff_t(fattr->size));
+			&& nfsi->npages == 0) {
+		i_size_write(inode, nfs_size_to_loff_t(fattr->size));
+		ret |= NFS_INO_INVALID_ATTR;
+	}
+	return ret;
 }
 
 /**

@@ -1183,7 +1191,7 @@ static int nfs_update_inode(struct inode
 			| NFS_INO_REVAL_PAGECACHE);
 
 	/* Do atomic weak cache consistency updates */
-	nfs_wcc_update_inode(inode, fattr);
+	invalid |= nfs_wcc_update_inode(inode, fattr);
 
 	/* More cache consistency checks */
 	if (fattr->valid & NFS_ATTR_FATTR_CHANGE) {

@@ -382,12 +382,13 @@ static void imx_start_tx(struct uart_por
 static irqreturn_t imx_rtsint(int irq, void *dev_id)
 {
 	struct imx_port *sport = dev_id;
-	unsigned int val = readl(sport->port.membase + USR1) & USR1_RTSS;
+	unsigned int val;
 	unsigned long flags;
 
 	spin_lock_irqsave(&sport->port.lock, flags);
 
 	writel(USR1_RTSD, sport->port.membase + USR1);
+	val = readl(sport->port.membase + USR1) & USR1_RTSS;
 	uart_handle_cts_change(&sport->port, !!val);
 	wake_up_interruptible(&sport->port.state->port.delta_msr_wait);
 

@@ -593,12 +593,12 @@ static const struct snd_soc_dapm_route a
 
 	{ "SPKL", "Input Switch", "MIXINL" },
 	{ "SPKL", "IN1LP Switch", "IN1LP" },
-	{ "SPKL", "Output Switch", "Left Output Mixer" },
+	{ "SPKL", "Output Switch", "Left Output PGA" },
 	{ "SPKL", NULL, "TOCLK" },
 
 	{ "SPKR", "Input Switch", "MIXINR" },
 	{ "SPKR", "IN1RP Switch", "IN1RP" },
-	{ "SPKR", "Output Switch", "Right Output Mixer" },
+	{ "SPKR", "Output Switch", "Right Output PGA" },
 	{ "SPKR", NULL, "TOCLK" },
 
 	{ "SPKL Boost", "Direct Voice Switch", "Direct Voice" },

@@ -620,8 +620,8 @@ static const struct snd_soc_dapm_route a
 	{ "SPKOUTRP", NULL, "SPKR Driver" },
 	{ "SPKOUTRN", NULL, "SPKR Driver" },
 
-	{ "Left Headphone Mux", "Mixer", "Left Output Mixer" },
-	{ "Right Headphone Mux", "Mixer", "Right Output Mixer" },
+	{ "Left Headphone Mux", "Mixer", "Left Output PGA" },
+	{ "Right Headphone Mux", "Mixer", "Right Output PGA" },
 
 	{ "Headphone PGA", NULL, "Left Headphone Mux" },
 	{ "Headphone PGA", NULL, "Right Headphone Mux" },

@@ -330,7 +330,7 @@ static int conf_choice(struct menu *menu
 		}
 		if (!child)
 			continue;
-		if (line[strlen(line) - 1] == '?') {
+		if (line[0] && line[strlen(line) - 1] == '?') {
 			print_help(child);
 			continue;
 		}

@@ -299,6 +299,32 @@ int ubifs_recover_master_node(struct ubi
 			goto out_free;
 		}
 		memcpy(c->rcvrd_mst_node, c->mst_node, UBIFS_MST_NODE_SZ);
+
+		/*
+		 * We had to recover the master node, which means there was an
+		 * unclean reboot. However, it is possible that the master node
+		 * is clean at this point, i.e., %UBIFS_MST_DIRTY is not set.
+		 * E.g., consider the following chain of events:
+		 *
+		 * 1. UBIFS was cleanly unmounted, so the master node is clean
+		 * 2. UBIFS is being mounted R/W and starts changing the master
+		 *    node in the first (%UBIFS_MST_LNUM). A power cut happens,
+		 *    so this LEB ends up with some amount of garbage at the
+		 *    end.
+		 * 3. UBIFS is being mounted R/O. We reach this place and
+		 *    recover the master node from the second LEB
+		 *    (%UBIFS_MST_LNUM + 1). But we cannot update the media
+		 *    because we are being mounted R/O. We have to defer the
+		 *    operation.
+		 * 4. However, this master node (@c->mst_node) is marked as
+		 *    clean (since the step 1). And if we just return, the
+		 *    mount code will be confused and won't recover the master
+		 *    node when it is re-mounter R/W later.
+		 *
+		 *    Thus, to force the recovery by marking the master node as
+		 *    dirty.
+		 */
+		c->mst_node->flags |= cpu_to_le32(UBIFS_MST_DIRTY);
 	} else {
 		/* Write the recovered master node */
 		c->max_sqnum = le64_to_cpu(mst->ch.sqnum) - 1;

@@ -125,7 +125,6 @@ struct igbvf_buffer {
 			unsigned int page_offset;
 		};
 	};
-	struct page *page;
 };
 
 union igbvf_desc {

@@ -63,7 +63,7 @@ static struct dasd_discipline dasd_eckd_
 static struct ccw_device_id dasd_eckd_ids[] = {
 	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3390, 0), .driver_info = 0x1},
 	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3390, 0), .driver_info = 0x2},
-	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3390, 0), .driver_info = 0x3},
+	{ CCW_DEVICE_DEVTYPE (0x3880, 0, 0x3380, 0), .driver_info = 0x3},
 	{ CCW_DEVICE_DEVTYPE (0x3990, 0, 0x3380, 0), .driver_info = 0x4},
 	{ CCW_DEVICE_DEVTYPE (0x2105, 0, 0x3380, 0), .driver_info = 0x5},
 	{ CCW_DEVICE_DEVTYPE (0x9343, 0, 0x9345, 0), .driver_info = 0x6},

@@ -47,7 +47,7 @@
 #include "iwl-6000-hw.h"
 
 /* Highest firmware API version supported */
-#define IWL5000_UCODE_API_MAX 2
+#define IWL5000_UCODE_API_MAX 5
 #define IWL5150_UCODE_API_MAX 2
 
 /* Lowest firmware API version supported */

@@ -1976,8 +1976,6 @@ static void atl1c_tx_map(struct atl1c_ad
 		else {
 			use_tpd = atl1c_get_tpd(adapter, type);
 			memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
-			use_tpd = atl1c_get_tpd(adapter, type);
-			memcpy(use_tpd, tpd, sizeof(struct atl1c_tpd_desc));
 		}
 		buffer_info = atl1c_get_tx_buffer(adapter, use_tpd);
 		buffer_info->length = buf_len - mapped_len;

@@ -867,8 +867,10 @@ int ip_append_data(struct sock *sk,
 	    !exthdrlen)
 		csummode = CHECKSUM_PARTIAL;
 
+	skb = skb_peek_tail(&sk->sk_write_queue);
+
 	inet->cork.length += length;
-	if (((length> mtu) || !skb_queue_empty(&sk->sk_write_queue)) &&
+	if (((length > mtu) || (skb && skb_is_gso(skb))) &&
 	    (sk->sk_protocol == IPPROTO_UDP) &&
 	    (rt->u.dst.dev->features & NETIF_F_UFO)) {
 		err = ip_ufo_append_data(sk, getfrag, from, length, hh_len,

@@ -886,7 +888,7 @@ int ip_append_data(struct sock *sk,
 	 * adding appropriate IP header.
 	 */
 
-	if ((skb = skb_peek_tail(&sk->sk_write_queue)) == NULL)
+	if (!skb)
 		goto alloc_new_skb;
 
 	while (length > 0) {

@@ -1115,7 +1117,8 @@ ssize_t	ip_append_page(struct sock *sk,
 		return -EINVAL;
 
 	inet->cork.length += size;
-	if ((sk->sk_protocol == IPPROTO_UDP) &&
+	if ((size + skb->len > mtu) &&
+	    (sk->sk_protocol == IPPROTO_UDP) &&
 	    (rt->u.dst.dev->features & NETIF_F_UFO)) {
 		skb_shinfo(skb)->gso_size = mtu - fragheaderlen;
 		skb_shinfo(skb)->gso_type = SKB_GSO_UDP;

@@ -265,8 +265,10 @@ static void __init setup_bootmem(void)
 	}
 	memset(pfnnid_map, 0xff, sizeof(pfnnid_map));
 
-	for (i = 0; i < npmem_ranges; i++)
+	for (i = 0; i < npmem_ranges; i++) {
+		node_set_state(i, N_NORMAL_MEMORY);
 		node_set_online(i);
+	}
 #endif
 
 	/*

@@ -38,7 +38,7 @@ MODULE_PARM_DESC(debug,
 	DEBSTATUS);
 
 #define DRIVER_VERSION "0.1"
-#define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver"
+#define DRIVER_NAME "flexcop-pci"
 #define DRIVER_AUTHOR "Patrick Boettcher <[email protected]>"
 
 struct flexcop_pci {

@@ -299,6 +299,8 @@ void __init paging_init(void)
 		zones_size[ZONE_DMA] = m68k_memory[i].size >> PAGE_SHIFT;
 		free_area_init_node(i, zones_size,
 				    m68k_memory[i].addr >> PAGE_SHIFT, NULL);
+		if (node_present_pages(i))
+			node_set_state(i, N_NORMAL_MEMORY);
 	}
 }
 

@@ -1925,6 +1925,15 @@ nfs_remount(struct super_block *sb, int
 	if (error < 0)
 		goto out;
 
+	/*
+	 * noac is a special case. It implies -o sync, but that's not
+	 * necessarily reflected in the mtab options. do_remount_sb
+	 * will clear MS_SYNCHRONOUS if -o sync wasn't specified in the
+	 * remount options, so we have to explicitly reset it.
+	 */
+	if (data->flags & NFS_MOUNT_NOAC)
+		*flags |= MS_SYNCHRONOUS;
+
 	/* compare new mount options with old ones */
 	error = nfs_compare_remount_data(nfss, data);
 out:

@@ -1228,7 +1228,7 @@ static void nfs4_state_manager(struct nf
 	int status = 0;
 
 	/* Ensure exclusive access to NFSv4 state */
-	for(;;) {
+	do {
 		if (test_and_clear_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state)) {
 			/* We're going to have to re-establish a clientid */
 			status = nfs4_reclaim_lease(clp);

@@ -1304,7 +1304,7 @@ static void nfs4_state_manager(struct nf
 			break;
 		if (test_and_set_bit(NFS4CLNT_MANAGER_RUNNING, &clp->cl_state) != 0)
 			break;
-	}
+	} while (atomic_read(&clp->cl_count) > 1);
 	return;
 out_error:
 	printk(KERN_WARNING "Error: state manager failed on NFSv4 server %s"

@@ -1123,8 +1123,8 @@ int agp_generic_insert_memory(struct agp
 		return -EINVAL;
 	}
 
-	/* AK: could wrap */
-	if ((pg_start + mem->page_count) > num_entries)
+	if (((pg_start + mem->page_count) > num_entries) ||
+	    ((pg_start + mem->page_count) < pg_start))
 		return -EINVAL;
 
 	j = pg_start;

@@ -1158,7 +1158,7 @@ int agp_generic_remove_memory(struct agp
 {
 	size_t i;
 	struct agp_bridge_data *bridge;
-	int mask_type;
+	int mask_type, num_entries;
 
 	bridge = mem->bridge;
 	if (!bridge)

@@ -1170,6 +1170,11 @@ int agp_generic_remove_memory(struct agp
 	if (type != mem->type)
 		return -EINVAL;
 
+	num_entries = agp_num_entries();
+	if (((pg_start + mem->page_count) > num_entries) ||
+	    ((pg_start + mem->page_count) < pg_start))
+		return -EINVAL;
+
 	mask_type = bridge->driver->agp_type_to_mask_type(bridge, type);
 	if (mask_type != 0) {
 		/* The generic routines know nothing of memory types */

@@ -123,6 +123,9 @@ static struct agp_memory *agp_create_use
 	struct agp_memory *new;
 	unsigned long alloc_size = num_agp_pages*sizeof(struct page *);
 
+	if (INT_MAX/sizeof(struct page *) < num_agp_pages)
+		return NULL;
+
 	new = kzalloc(sizeof(struct agp_memory), GFP_KERNEL);
 	if (new == NULL)
 		return NULL;

@@ -242,11 +245,14 @@ struct agp_memory *agp_allocate_memory(s
 	int scratch_pages;
 	struct agp_memory *new;
 	size_t i;
+	int cur_memory;
 
 	if (!bridge)
 		return NULL;
 
-	if ((atomic_read(&bridge->current_memory_agp) + page_count) > bridge->max_memory_agp)
+	cur_memory = atomic_read(&bridge->current_memory_agp);
+	if ((cur_memory + page_count > bridge->max_memory_agp) ||
+	    (cur_memory + page_count < page_count))
 		return NULL;
 
 	if (type >= AGP_USER_TYPES) {

@@ -281,7 +281,7 @@ static void xenkbd_backend_changed(struc
 				   enum xenbus_state backend_state)
 {
 	struct xenkbd_info *info = dev_get_drvdata(&dev->dev);
-	int val;
+	int ret, val;
 
 	switch (backend_state) {
 	case XenbusStateInitialising:

@@ -292,6 +292,16 @@ static void xenkbd_backend_changed(struc
 
 	case XenbusStateInitWait:
 InitWait:
+		ret = xenbus_scanf(XBT_NIL, info->xbdev->otherend,
+				   "feature-abs-pointer", "%d", &val);
+		if (ret < 0)
+			val = 0;
+		if (val) {
+			ret = xenbus_printf(XBT_NIL, info->xbdev->nodename,
+					    "request-abs-pointer", "1");
+			if (ret)
+				pr_warning("can't request abs-pointer\n");
+		}
 		xenbus_switch_state(dev, XenbusStateConnected);
 		break;
 

@@ -3508,6 +3508,9 @@ static long pmcraid_ioctl_passthrough(
 			rc = -EFAULT;
 			goto out_free_buffer;
 		}
+	} else if (request_size < 0) {
+		rc = -EINVAL;
+		goto out_free_buffer;
 	}
 
 	/* check if we have any additional command parameters */

@@ -636,6 +636,13 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPT
 	data_out_sz = karg.data_out_size;
 	data_in_sz = karg.data_in_size;
 
+	/* Check for overflow and wraparound */
+	if (karg.data_sge_offset * 4 > ioc->request_sz ||
+	    karg.data_sge_offset > (UINT_MAX / 4)) {
+		ret = -EINVAL;
+		goto out;
+	}
+
 	/* copy in request message frame from user */
 	if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) {
 		printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__,

@@ -1809,7 +1816,7 @@ _ctl_diag_read_buffer(void __user *arg,
 	Mpi2DiagBufferPostReply_t *mpi_reply;
 	int rc, i;
 	u8 buffer_type;
-	unsigned long timeleft;
+	unsigned long timeleft, request_size, copy_size;
 	u16 smid;
 	u16 ioc_status;
 	u8 issue_reset = 0;

@@ -1845,6 +1852,8 @@ _ctl_diag_read_buffer(void __user *arg,
 		return -ENOMEM;
 	}
 
+	request_size = ioc->diag_buffer_sz[buffer_type];
+
 	if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) {
 		printk(MPT2SAS_ERR_FMT "%s: either the starting_offset "
 		    "or bytes_to_read are not 4 byte aligned\n", ioc->name,

@@ -1852,13 +1861,23 @@ _ctl_diag_read_buffer(void __user *arg,
 		return -EINVAL;
 	}
 
+	if (karg.starting_offset > request_size)
+		return -EINVAL;
+
 	diag_data = (void *)(request_data + karg.starting_offset);
 	dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: diag_buffer(%p), "
 	    "offset(%d), sz(%d)\n", ioc->name, __func__,
 	    diag_data, karg.starting_offset, karg.bytes_to_read));
 
+	/* Truncate data on requests that are too large */
+	if ((diag_data + karg.bytes_to_read < diag_data) ||
+	    (diag_data + karg.bytes_to_read > request_data + request_size))
+		copy_size = request_size - karg.starting_offset;
+	else
+		copy_size = karg.bytes_to_read;
+
 	if (copy_to_user((void __user *)uarg->diagnostic_data,
-	    diag_data, karg.bytes_to_read)) {
+	    diag_data, copy_size)) {
 		printk(MPT2SAS_ERR_FMT "%s: Unable to write "
 		    "mpt_diag_read_buffer_t data @ %p\n", ioc->name,
 		    __func__, diag_data);

@@ -318,14 +318,8 @@ static void scsi_device_dev_release_user
 		kfree(evt);
 	}
 
-	if (sdev->request_queue) {
-		sdev->request_queue->queuedata = NULL;
-		/* user context needed to free queue */
-		scsi_free_queue(sdev->request_queue);
-		/* temporary expedient, try to catch use of queue lock
-		 * after free of sdev */
-		sdev->request_queue = NULL;
-	}
+	/* NULL queue means the device can't be used */
+	sdev->request_queue = NULL;
 
 	scsi_target_reap(scsi_target(sdev));
 

@@ -925,6 +919,12 @@ void __scsi_remove_device(struct scsi_de
 	if (sdev->host->hostt->slave_destroy)
 		sdev->host->hostt->slave_destroy(sdev);
 	transport_destroy_device(dev);
+
+	/* cause the request function to reject all I/O requests */
+	sdev->request_queue->queuedata = NULL;
+
+	/* Freeing the queue signals to block that we're done */
+	scsi_free_queue(sdev->request_queue);
 	put_device(dev);
 }
 

@@ -569,6 +569,7 @@ static struct sdhci_pci_slot * __devinit
 	host->ioaddr = pci_ioremap_bar(pdev, bar);
 	if (!host->ioaddr) {
 		dev_err(&pdev->dev, "failed to remap registers\n");
+		ret = -ENOMEM;
 		goto release;
 	}
 

@@ -1277,7 +1277,7 @@ static void sdhci_tasklet_finish(unsigne
 	 * upon error conditions.
 	 */
 	if (!(host->flags & SDHCI_DEVICE_DEAD) &&
-		(mrq->cmd->error ||
+	    ((mrq->cmd && mrq->cmd->error) ||
 		 (mrq->data && (mrq->data->error ||
 		  (mrq->data->stop && mrq->data->stop->error))) ||
 		   (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {

@@ -1266,6 +1266,13 @@ static void sdhci_tasklet_finish(unsigne
 
 	host = (struct sdhci_host*)param;
 
+        /*
+         * If this tasklet gets rescheduled while running, it will
+         * be run again afterwards but without any active request.
+         */
+	if (!host->mrq)
+		return;
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	del_timer(&host->timer);

@@ -1134,7 +1134,7 @@ static int vhci_hcd_probe(struct platfor
 		usbip_uerr("create hcd failed\n");
 		return -ENOMEM;
 	}
-
+	hcd->has_tt = 1;
 
 	/* this is private data for vhci_hcd */
 	the_controller = hcd_to_vhci(hcd);

@@ -653,7 +653,7 @@ cpu_dev_register(amd_cpu_dev);
  */
 
 const int amd_erratum_400[] =
-	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0xf, 0x41, 0x2, 0xff, 0xf),
+	AMD_OSVW_ERRATUM(1, AMD_MODEL_RANGE(0x0f, 0x4, 0x2, 0xff, 0xf),
 			    AMD_MODEL_RANGE(0x10, 0x2, 0x1, 0xff, 0xf));
 
 

@@ -503,6 +503,8 @@ static int unix_dgram_connect(struct soc
 			      int, int);
 static int unix_seqpacket_sendmsg(struct kiocb *, struct socket *,
 				  struct msghdr *, size_t);
+static int unix_seqpacket_recvmsg(struct kiocb *, struct socket *,
+				  struct msghdr *, size_t, int);
 
 static const struct proto_ops unix_stream_ops = {
 	.family =	PF_UNIX,

@@ -562,7 +564,7 @@ static const struct proto_ops unix_seqpa
 	.setsockopt =	sock_no_setsockopt,
 	.getsockopt =	sock_no_getsockopt,
 	.sendmsg =	unix_seqpacket_sendmsg,
-	.recvmsg =	unix_dgram_recvmsg,
+	.recvmsg =	unix_seqpacket_recvmsg,
 	.mmap =		sock_no_mmap,
 	.sendpage =	sock_no_sendpage,
 };

@@ -1639,6 +1641,18 @@ static int unix_seqpacket_sendmsg(struct
 	return unix_dgram_sendmsg(kiocb, sock, msg, len);
 }
 
+static int unix_seqpacket_recvmsg(struct kiocb *iocb, struct socket *sock,
+			      struct msghdr *msg, size_t size,
+			      int flags)
+{
+	struct sock *sk = sock->sk;
+
+	if (sk->sk_state != TCP_ESTABLISHED)
+		return -ENOTCONN;
+
+	return unix_dgram_recvmsg(iocb, sock, msg, size, flags);
+}
+
 static void unix_copy_addr(struct msghdr *msg, struct sock *sk)
 {
 	struct unix_sock *u = unix_sk(sk);

@@ -311,7 +311,7 @@ asmlinkage long sys_oabi_semtimedop(int
 	long err;
 	int i;
 
-	if (nsops < 1)
+	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
 	sops = kmalloc(sizeof(*sops) * nsops, GFP_KERNEL);
 	if (!sops)

@@ -141,7 +141,7 @@ static int i8k_smm(struct smm_regs *regs
 		"lahf\n\t"
 		"shrl $8,%%eax\n\t"
 		"andl $1,%%eax\n"
-		:"=a"(rc)
+		:"=a"(rc), "+m" (*regs)
 		:    "a"(regs)
 		:    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #else

@@ -166,7 +166,8 @@ static int i8k_smm(struct smm_regs *regs
 	    "movl %%edx,0(%%eax)\n\t"
 	    "lahf\n\t"
 	    "shrl $8,%%eax\n\t"
-	    "andl $1,%%eax\n":"=a"(rc)
+	    "andl $1,%%eax\n"
+	    :"=a"(rc), "+m" (*regs)
 	    :    "a"(regs)
 	    :    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #endif

@@ -119,7 +119,7 @@ static int i8k_smm(struct smm_regs *regs
 	int eax = regs->eax;
 
 #if defined(CONFIG_X86_64)
-	asm("pushq %%rax\n\t"
+	asm volatile("pushq %%rax\n\t"
 		"movl 0(%%rax),%%edx\n\t"
 		"pushq %%rdx\n\t"
 		"movl 4(%%rax),%%ebx\n\t"

@@ -141,11 +141,11 @@ static int i8k_smm(struct smm_regs *regs
 		"lahf\n\t"
 		"shrl $8,%%eax\n\t"
 		"andl $1,%%eax\n"
-		:"=a"(rc), "+m" (*regs)
+		:"=a"(rc)
 		:    "a"(regs)
 		:    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #else
-	asm("pushl %%eax\n\t"
+	asm volatile("pushl %%eax\n\t"
 	    "movl 0(%%eax),%%edx\n\t"
 	    "push %%edx\n\t"
 	    "movl 4(%%eax),%%ebx\n\t"

@@ -167,7 +167,7 @@ static int i8k_smm(struct smm_regs *regs
 	    "lahf\n\t"
 	    "shrl $8,%%eax\n\t"
 	    "andl $1,%%eax\n"
-	    :"=a"(rc), "+m" (*regs)
+	    :"=a"(rc)
 	    :    "a"(regs)
 	    :    "%ebx", "%ecx", "%edx", "%esi", "%edi", "memory");
 #endif

@@ -1379,7 +1379,7 @@ nfsd_create_v3(struct svc_rqst *rqstp, s
 		goto out;
 	if (!(iap->ia_valid & ATTR_MODE))
 		iap->ia_mode = 0;
-	err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_CREATE);
+	err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_EXEC);
 	if (err)
 		goto out;
 

@@ -1401,6 +1401,13 @@ nfsd_create_v3(struct svc_rqst *rqstp, s
 	if (IS_ERR(dchild))
 		goto out_nfserr;
 
+	/* If file doesn't exist, check for permissions to create one */
+	if (!dchild->d_inode) {
+		err = fh_verify(rqstp, fhp, S_IFDIR, NFSD_MAY_CREATE);
+		if (err)
+			goto out;
+	}
+
 	err = fh_compose(resfhp, fhp->fh_export, dchild, fhp);
 	if (err)
 		goto out;

@@ -1425,9 +1425,14 @@ static int bcm_init(struct sock *sk)
 static int bcm_release(struct socket *sock)
 {
 	struct sock *sk = sock->sk;
-	struct bcm_sock *bo = bcm_sk(sk);
+	struct bcm_sock *bo;
 	struct bcm_op *op, *next;
 
+	if (sk == NULL)
+		return 0;
+
+	bo = bcm_sk(sk);
+
 	/* remove bcm_ops, timer, rx_unregister(), etc. */
 
 	unregister_netdevice_notifier(&bo->notifier);

@@ -1299,6 +1299,11 @@ static bool ldm_frag_add (const u8 *data
 
 	BUG_ON (!data || !frags);
 
+	if (size < 2 * VBLK_SIZE_HEAD) {
+		ldm_error("Value of size is to small.");
+		return false;
+	}
+
 	group = get_unaligned_be32(data + 0x08);
 	rec   = get_unaligned_be16(data + 0x0C);
 	num   = get_unaligned_be16(data + 0x0E);

@@ -1306,6 +1311,10 @@ static bool ldm_frag_add (const u8 *data
 		ldm_error ("A VBLK claims to have %d parts.", num);
 		return false;
 	}
+	if (rec >= num) {
+		ldm_error("REC value (%d) exceeds NUM value (%d)", rec, num);
+		return false;
+	}
 
 	list_for_each (item, frags) {
 		f = list_entry (item, struct frag, list);

@@ -1334,10 +1343,9 @@ found:
 
 	f->map |= (1 << rec);
 
-	if (num > 0) {
-		data += VBLK_SIZE_HEAD;
-		size -= VBLK_SIZE_HEAD;
-	}
+	data += VBLK_SIZE_HEAD;
+	size -= VBLK_SIZE_HEAD;
+
 	memcpy (f->data+rec*(size-VBLK_SIZE_HEAD)+VBLK_SIZE_HEAD, data, size);
 
 	return true;

@@ -487,6 +487,12 @@ struct status_desc {
 #define NX_P3_MN_ROMIMAGE	2
 #define NX_FLASH_ROMIMAGE	3
 
+#define NX_P2_MN_ROMIMAGE_NAME		"nxromimg.bin"
+#define NX_P3_CT_ROMIMAGE_NAME		"nx3fwct.bin"
+#define NX_P3_MN_ROMIMAGE_NAME		"nx3fwmn.bin"
+#define NX_UNIFIED_ROMIMAGE_NAME	"phanfw.bin"
+#define NX_FLASH_ROMIMAGE_NAME		"flash"
+
 extern char netxen_nic_driver_name[];
 
 /* Number of status descriptors to handle per interrupt */

@@ -673,7 +673,11 @@ netxen_need_fw_reset(struct netxen_adapt
 }
 
 static char *fw_name[] = {
-	"nxromimg.bin", "nx3fwct.bin", "nx3fwmn.bin", "flash",
+	NX_P2_MN_ROMIMAGE_NAME,
+	NX_P3_CT_ROMIMAGE_NAME,
+	NX_P3_MN_ROMIMAGE_NAME,
+	NX_UNIFIED_ROMIMAGE_NAME,
+	NX_FLASH_ROMIMAGE_NAME,
 };
 
 int

@@ -38,6 +38,10 @@
 MODULE_DESCRIPTION("NetXen Multi port (1/10) Gigabit Network Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(NETXEN_NIC_LINUX_VERSIONID);
+MODULE_FIRMWARE(NX_P2_MN_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_P3_CT_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_P3_MN_ROMIMAGE_NAME);
+MODULE_FIRMWARE(NX_UNIFIED_ROMIMAGE_NAME);
 
 char netxen_nic_driver_name[] = "netxen_nic";
 static char netxen_nic_driver_string[] = "NetXen Network Driver version "

@@ -49,6 +49,7 @@
 #include <linux/prefetch.h>
 #include <linux/zlib.h>
 #include <linux/io.h>
+#include <linux/stringify.h>
 
 
 #include "bnx2x.h"

@@ -63,8 +64,13 @@
 #include <linux/firmware.h>
 #include "bnx2x_fw_file_hdr.h"
 /* FW files */
-#define FW_FILE_PREFIX_E1	"bnx2x-e1-"
-#define FW_FILE_PREFIX_E1H	"bnx2x-e1h-"
+#define FW_FILE_VERSION					\
+	__stringify(BCM_5710_FW_MAJOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_MINOR_VERSION) "."	\
+	__stringify(BCM_5710_FW_REVISION_VERSION) "."	\
+	__stringify(BCM_5710_FW_ENGINEERING_VERSION)
+#define FW_FILE_NAME_E1		"bnx2x-e1-" FW_FILE_VERSION ".fw"
+#define FW_FILE_NAME_E1H	"bnx2x-e1h-" FW_FILE_VERSION ".fw"
 
 /* Time in jiffies before concluding the transmitter is hung */
 #define TX_TIMEOUT		(5*HZ)

@@ -77,6 +83,8 @@ MODULE_AUTHOR("Eliezer Tamir");
 MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_FIRMWARE(FW_FILE_NAME_E1);
+MODULE_FIRMWARE(FW_FILE_NAME_E1H);
 
 static int multi_mode = 1;
 module_param(multi_mode, int, 0);

@@ -11830,21 +11838,14 @@ static inline void be16_to_cpu_n(const u
 
 static int __devinit bnx2x_init_firmware(struct bnx2x *bp, struct device *dev)
 {
-	char fw_file_name[40] = {0};
+	const char *fw_file_name;
 	struct bnx2x_fw_file_hdr *fw_hdr;
-	int rc, offset;
+	int rc;
 
-	/* Create a FW file name */
 	if (CHIP_IS_E1(bp))
-		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1);
+		fw_file_name = FW_FILE_NAME_E1;
 	else
-		offset = sprintf(fw_file_name, FW_FILE_PREFIX_E1H);
-
-	sprintf(fw_file_name + offset, "%d.%d.%d.%d.fw",
-		BCM_5710_FW_MAJOR_VERSION,
-		BCM_5710_FW_MINOR_VERSION,
-		BCM_5710_FW_REVISION_VERSION,
-		BCM_5710_FW_ENGINEERING_VERSION);
+		fw_file_name = FW_FILE_NAME_E1H;
 
 	printk(KERN_INFO PFX "Loading %s\n", fw_file_name);
 

@@ -125,11 +125,9 @@ enum {				/* adapter interrupt-maintaine
 	IRQ_NUM_STATS		/* keep last */
 };
 
-enum {
-	TP_VERSION_MAJOR	= 1,
-	TP_VERSION_MINOR	= 1,
-	TP_VERSION_MICRO	= 0
-};
+#define TP_VERSION_MAJOR	1
+#define TP_VERSION_MINOR	1
+#define TP_VERSION_MICRO	0
 
 #define S_TP_VERSION_MAJOR		16
 #define M_TP_VERSION_MAJOR		0xFF

@@ -44,6 +44,7 @@
 #include <linux/rtnetlink.h>
 #include <linux/firmware.h>
 #include <linux/log2.h>
+#include <linux/stringify.h>
 #include <asm/uaccess.h>
 
 #include "common.h"

@@ -989,11 +990,21 @@ static int bind_qsets(struct adapter *ad
 	return err;
 }
 
-#define FW_FNAME "cxgb3/t3fw-%d.%d.%d.bin"
-#define TPSRAM_NAME "cxgb3/t3%c_psram-%d.%d.%d.bin"
+#define FW_VERSION __stringify(FW_VERSION_MAJOR) "."			\
+	__stringify(FW_VERSION_MINOR) "." __stringify(FW_VERSION_MICRO)
+#define FW_FNAME "cxgb3/t3fw-" FW_VERSION ".bin"
+#define TPSRAM_VERSION __stringify(TP_VERSION_MAJOR) "."		\
+	__stringify(TP_VERSION_MINOR) "." __stringify(TP_VERSION_MICRO)
+#define TPSRAM_NAME "cxgb3/t3%c_psram-" TPSRAM_VERSION ".bin"
 #define AEL2005_OPT_EDC_NAME "cxgb3/ael2005_opt_edc.bin"
 #define AEL2005_TWX_EDC_NAME "cxgb3/ael2005_twx_edc.bin"
 #define AEL2020_TWX_EDC_NAME "cxgb3/ael2020_twx_edc.bin"
+MODULE_FIRMWARE(FW_FNAME);
+MODULE_FIRMWARE("cxgb3/t3b_psram-" TPSRAM_VERSION ".bin");
+MODULE_FIRMWARE("cxgb3/t3c_psram-" TPSRAM_VERSION ".bin");
+MODULE_FIRMWARE(AEL2005_OPT_EDC_NAME);
+MODULE_FIRMWARE(AEL2005_TWX_EDC_NAME);
+MODULE_FIRMWARE(AEL2020_TWX_EDC_NAME);
 
 static inline const char *get_edc_fw_name(int edc_idx)
 {

@@ -1064,16 +1075,13 @@ int t3_get_edc_fw(struct cphy *phy, int
 static int upgrade_fw(struct adapter *adap)
 {
 	int ret;
-	char buf[64];
 	const struct firmware *fw;
 	struct device *dev = &adap->pdev->dev;
 
-	snprintf(buf, sizeof(buf), FW_FNAME, FW_VERSION_MAJOR,
-		 FW_VERSION_MINOR, FW_VERSION_MICRO);
-	ret = request_firmware(&fw, buf, dev);
+	ret = request_firmware(&fw, FW_FNAME, dev);
 	if (ret < 0) {
 		dev_err(dev, "could not upgrade firmware: unable to load %s\n",
-			buf);
+			FW_FNAME);
 		return ret;
 	}
 	ret = t3_load_fw(adap, fw->data, fw->size);

@@ -1117,8 +1125,7 @@ static int update_tpsram(struct adapter
 	if (!rev)
 		return 0;
 
-	snprintf(buf, sizeof(buf), TPSRAM_NAME, rev,
-		 TP_VERSION_MAJOR, TP_VERSION_MINOR, TP_VERSION_MICRO);
+	snprintf(buf, sizeof(buf), TPSRAM_NAME, rev);
 
 	ret = request_firmware(&tpsram, buf, dev);
 	if (ret < 0) {

@@ -264,6 +264,10 @@ static char *myri10ge_fw_unaligned = "my
 static char *myri10ge_fw_aligned = "myri10ge_eth_z8e.dat";
 static char *myri10ge_fw_rss_unaligned = "myri10ge_rss_ethp_z8e.dat";
 static char *myri10ge_fw_rss_aligned = "myri10ge_rss_eth_z8e.dat";
+MODULE_FIRMWARE("myri10ge_ethp_z8e.dat");
+MODULE_FIRMWARE("myri10ge_eth_z8e.dat");
+MODULE_FIRMWARE("myri10ge_rss_ethp_z8e.dat");
+MODULE_FIRMWARE("myri10ge_rss_eth_z8e.dat");
 
 static char *myri10ge_fw_name = NULL;
 module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);

@@ -510,3 +510,6 @@ module_exit(netx_eth_cleanup);
 MODULE_AUTHOR("Sascha Hauer, Pengutronix");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS("platform:" CARDNAME);
+MODULE_FIRMWARE("xc0.bin");
+MODULE_FIRMWARE("xc1.bin");
+MODULE_FIRMWARE("xc2.bin");

@@ -1768,6 +1768,13 @@ static struct pcmcia_device_id pcnet_ids
 	PCMCIA_DEVICE_NULL
 };
 MODULE_DEVICE_TABLE(pcmcia, pcnet_ids);
+MODULE_FIRMWARE("cis/PCMLM28.cis");
+MODULE_FIRMWARE("cis/DP83903.cis");
+MODULE_FIRMWARE("cis/LA-PCM.cis");
+MODULE_FIRMWARE("PE520.cis");
+MODULE_FIRMWARE("cis/NE2K.cis");
+MODULE_FIRMWARE("cis/PE-200.cis");
+MODULE_FIRMWARE("cis/tamarack.cis");
 
 static struct pcmcia_driver pcnet_driver = {
 	.drv		= {

@@ -57,6 +57,7 @@ MODULE_AUTHOR("Utz Bacher <utz.bacher@de
 MODULE_DESCRIPTION("Spider Southbridge Gigabit Ethernet driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(VERSION);
+MODULE_FIRMWARE(SPIDER_NET_FIRMWARE_NAME);
 
 static int rx_descriptors = SPIDER_NET_RX_DESCRIPTORS_DEFAULT;
 static int tx_descriptors = SPIDER_NET_TX_DESCRIPTORS_DEFAULT;

@@ -1364,6 +1364,8 @@ static int tms380tr_reset_adapter(struct
 	return (-1);
 }
 
+MODULE_FIRMWARE("tms380tr.bin");
+
 /*
  * Starts bring up diagnostics of token ring adapter and evaluates
  * diagnostic results.

@@ -135,7 +135,8 @@ static int synaptics_capability(struct p
 	if (synaptics_send_cmd(psmouse, SYN_QUE_CAPABILITIES, cap))
 		return -1;
 	priv->capabilities = (cap[0] << 16) | (cap[1] << 8) | cap[2];
-	priv->ext_cap = 0;
+	priv->ext_cap = priv->ext_cap_0c = 0;
+
 	if (!SYN_CAP_VALID(priv->capabilities))
 		return -1;
 

@@ -148,7 +149,7 @@ static int synaptics_capability(struct p
 	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 1) {
 		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB, cap)) {
 			printk(KERN_ERR "Synaptics claims to have extended capabilities,"
-			       " but I'm not able to read them.");
+			       " but I'm not able to read them.\n");
 		} else {
 			priv->ext_cap = (cap[0] << 16) | (cap[1] << 8) | cap[2];
 

@@ -160,6 +161,16 @@ static int synaptics_capability(struct p
 				priv->ext_cap &= 0xff0fff;
 		}
 	}
+
+	if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 4) {
+		if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_CAPAB_0C, cap)) {
+			printk(KERN_ERR "Synaptics claims to have extended capability 0x0c,"
+			       " but I'm not able to read it.\n");
+		} else {
+			priv->ext_cap_0c = (cap[0] << 16) | (cap[1] << 8) | cap[2];
+		}
+	}
+
 	return 0;
 }
 

@@ -346,7 +357,15 @@ static void synaptics_parse_hw_state(uns
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
-		if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
+		if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+			/*
+			 * Clickpad's button is transmitted as middle button,
+			 * however, since it is primary button, we will report
+			 * it as BTN_LEFT.
+			 */
+			hw->left = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
+
+		} else if (SYN_CAP_MIDDLE_BUTTON(priv->capabilities)) {
 			hw->middle = ((buf[0] ^ buf[3]) & 0x01) ? 1 : 0;
 			if (hw->w == 2)
 				hw->scroll = (signed char)(buf[1]);

@@ -591,6 +610,12 @@ static void set_input_params(struct inpu
 
 	dev->absres[ABS_X] = priv->x_res;
 	dev->absres[ABS_Y] = priv->y_res;
+
+	if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+		/* Clickpads report only left button */
+		__clear_bit(BTN_RIGHT, dev->keybit);
+		__clear_bit(BTN_MIDDLE, dev->keybit);
+	}
 }
 
 static void synaptics_disconnect(struct psmouse *psmouse)

@@ -689,10 +714,10 @@ int synaptics_init(struct psmouse *psmou
 
 	priv->pkt_type = SYN_MODEL_NEWABS(priv->model_id) ? SYN_NEWABS : SYN_OLDABS;
 
-	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx\n",
+	printk(KERN_INFO "Synaptics Touchpad, model: %ld, fw: %ld.%ld, id: %#lx, caps: %#lx/%#lx/%#lx\n",
 		SYN_ID_MODEL(priv->identity),
 		SYN_ID_MAJOR(priv->identity), SYN_ID_MINOR(priv->identity),
-		priv->model_id, priv->capabilities, priv->ext_cap);
+		priv->model_id, priv->capabilities, priv->ext_cap, priv->ext_cap_0c);
 
 	set_input_params(psmouse->dev, priv);
 

@@ -18,6 +18,7 @@
 #define SYN_QUE_SERIAL_NUMBER_SUFFIX	0x07
 #define SYN_QUE_RESOLUTION		0x08
 #define SYN_QUE_EXT_CAPAB		0x09
+#define SYN_QUE_EXT_CAPAB_0C		0x0c
 
 /* synatics modes */
 #define SYN_BIT_ABSOLUTE_MODE		(1 << 7)

@@ -48,6 +49,8 @@
 #define SYN_CAP_VALID(c)		((((c) & 0x00ff00) >> 8) == 0x47)
 #define SYN_EXT_CAP_REQUESTS(c)		(((c) & 0x700000) >> 20)
 #define SYN_CAP_MULTI_BUTTON_NO(ec)	(((ec) & 0x00f000) >> 12)
+#define SYN_CAP_PRODUCT_ID(ec)		(((ec) & 0xff0000) >> 16)
+#define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100100)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))

@@ -96,6 +99,7 @@ struct synaptics_data {
 	unsigned long int model_id;		/* Model-ID */
 	unsigned long int capabilities;		/* Capabilities */
 	unsigned long int ext_cap;		/* Extended Capabilities */
+	unsigned long int ext_cap_0c;		/* Ext Caps from 0x0c query */
 	unsigned long int identity;		/* Identification */
 	int x_res;				/* X resolution in units/mm */
 	int y_res;				/* Y resolution in units/mm */

@@ -420,6 +420,7 @@ static void elantech_set_input_params(st
 
 	__set_bit(EV_KEY, dev->evbit);
 	__set_bit(EV_ABS, dev->evbit);
+	__clear_bit(EV_REL, dev->evbit);
 
 	__set_bit(BTN_LEFT, dev->keybit);
 	__set_bit(BTN_RIGHT, dev->keybit);

@@ -665,7 +665,8 @@ int elantech_init(struct psmouse *psmous
 	 * Assume every version greater than this is new EeePC style
 	 * hardware with 6 byte packets
 	 */
-	if (etd->fw_version_maj >= 0x02 && etd->fw_version_min >= 0x30) {
+	if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) ||
+	    etd->fw_version_maj > 0x02) {
 		etd->hw_version = 2;
 		/* For now show extra debug information */
 		etd->debug = 1;

@@ -24,6 +24,10 @@
 			printk(KERN_DEBUG format, ##arg);	\
 	} while (0)
 
+static bool force_elantech;
+module_param_named(force_elantech, force_elantech, bool, 0644);
+MODULE_PARM_DESC(force_elantech, "Force the Elantech PS/2 protocol extension to be used, 1 = enabled, 0 = disabled (default).");
+
 /*
  * Send a Synaptics style sliced query command
  */

@@ -595,8 +599,12 @@ int elantech_detect(struct psmouse *psmo
 		 param[0], param[1], param[2]);
 
 	if (param[0] == 0 || param[1] != 0) {
-		pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
-		return -1;
+		if (!force_elantech) {
+			pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
+			return -1;
+		}
+
+		pr_debug("elantech.c: Probably not a real Elantech touchpad. Enabling anyway due to force_elantech.\n");
 	}
 
 	if (set_properties) {

@@ -185,13 +185,17 @@ static void elantech_report_absolute_v1(
 	static int old_fingers;
 
 	if (etd->fw_version_maj == 0x01) {
-		/* byte 0:  D   U  p1  p2   1  p3   R   L
-		   byte 1:  f   0  th  tw  x9  x8  y9  y8 */
+		/*
+		 * byte 0:  D   U  p1  p2   1  p3   R   L
+		 * byte 1:  f   0  th  tw  x9  x8  y9  y8
+		 */
 		fingers = ((packet[1] & 0x80) >> 7) +
 				((packet[1] & 0x30) >> 4);
 	} else {
-		/* byte 0: n1  n0  p2  p1   1  p3   R   L
-		   byte 1:  0   0   0   0  x9  x8  y9  y8 */
+		/*
+		 * byte 0: n1  n0  p2  p1   1  p3   R   L
+		 * byte 1:  0   0   0   0  x9  x8  y9  y8
+		 */
 		fingers = (packet[0] & 0xc0) >> 6;
 	}
 

@@ -205,13 +209,15 @@ static void elantech_report_absolute_v1(
 
 	input_report_key(dev, BTN_TOUCH, fingers != 0);
 
-	/* byte 2: x7  x6  x5  x4  x3  x2  x1  x0
-	   byte 3: y7  y6  y5  y4  y3  y2  y1  y0 */
+	/*
+	 * byte 2: x7  x6  x5  x4  x3  x2  x1  x0
+	 * byte 3: y7  y6  y5  y4  y3  y2  y1  y0
+	 */
 	if (fingers) {
 		input_report_abs(dev, ABS_X,
 			((packet[1] & 0x0c) << 6) | packet[2]);
-		input_report_abs(dev, ABS_Y, ETP_YMAX_V1 -
-			(((packet[1] & 0x03) << 8) | packet[3]));
+		input_report_abs(dev, ABS_Y,
+			ETP_YMAX_V1 - (((packet[1] & 0x03) << 8) | packet[3]));
 	}
 
 	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);

@@ -250,34 +256,47 @@ static void elantech_report_absolute_v2(
 
 	switch (fingers) {
 	case 1:
-		/* byte 1: x15 x14 x13 x12 x11 x10 x9  x8
-		   byte 2: x7  x6  x5  x4  x4  x2  x1  x0 */
-		input_report_abs(dev, ABS_X, (packet[1] << 8) | packet[2]);
-		/* byte 4: y15 y14 y13 y12 y11 y10 y8  y8
-		   byte 5: y7  y6  y5  y4  y3  y2  y1  y0 */
-		input_report_abs(dev, ABS_Y, ETP_YMAX_V2 -
-			((packet[4] << 8) | packet[5]));
+		/*
+		 * byte 1:  .   .   .   .   .  x10 x9  x8
+		 * byte 2: x7  x6  x5  x4  x4  x2  x1  x0
+		 */
+		input_report_abs(dev, ABS_X,
+			((packet[1] & 0x07) << 8) | packet[2]);
+		/*
+		 * byte 4:  .   .   .   .   .   .  y9  y8
+		 * byte 5: y7  y6  y5  y4  y3  y2  y1  y0
+		 */
+		input_report_abs(dev, ABS_Y,
+			ETP_YMAX_V2 - (((packet[4] & 0x03) << 8) | packet[5]));
 		break;
 
 	case 2:
-		/* The coordinate of each finger is reported separately with
-		   a lower resolution for two finger touches */
-		/* byte 0:  .   .  ay8 ax8  .   .   .   .
-		   byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0 */
+		/*
+		 * The coordinate of each finger is reported separately
+		 * with a lower resolution for two finger touches:
+		 * byte 0:  .   .  ay8 ax8  .   .   .   .
+		 * byte 1: ax7 ax6 ax5 ax4 ax3 ax2 ax1 ax0
+		 */
 		x1 = ((packet[0] & 0x10) << 4) | packet[1];
 		/* byte 2: ay7 ay6 ay5 ay4 ay3 ay2 ay1 ay0 */
 		y1 = ETP_2FT_YMAX - (((packet[0] & 0x20) << 3) | packet[2]);
-		/* byte 3:  .   .  by8 bx8  .   .   .   .
-		   byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0 */
+		/*
+		 * byte 3:  .   .  by8 bx8  .   .   .   .
+		 * byte 4: bx7 bx6 bx5 bx4 bx3 bx2 bx1 bx0
+		 */
 		x2 = ((packet[3] & 0x10) << 4) | packet[4];
 		/* byte 5: by7 by8 by5 by4 by3 by2 by1 by0 */
 		y2 = ETP_2FT_YMAX - (((packet[3] & 0x20) << 3) | packet[5]);
-		/* For compatibility with the X Synaptics driver scale up one
-		   coordinate and report as ordinary mouse movent */
+		/*
+		 * For compatibility with the X Synaptics driver scale up
+		 * one coordinate and report as ordinary mouse movent
+		 */
 		input_report_abs(dev, ABS_X, x1 << 2);
 		input_report_abs(dev, ABS_Y, y1 << 2);
-		/* For compatibility with the proprietary X Elantech driver
-		   report both coordinates as hat coordinates */
+		/*
+		 * For compatibility with the proprietary X Elantech driver
+		 * report both coordinates as hat coordinates
+		 */
 		input_report_abs(dev, ABS_HAT0X, x1);
 		input_report_abs(dev, ABS_HAT0Y, y1);
 		input_report_abs(dev, ABS_HAT1X, x2);

@@ -184,7 +184,7 @@ static void elantech_report_absolute_v1(
 	int fingers;
 	static int old_fingers;
 
-	if (etd->fw_version_maj == 0x01) {
+	if (etd->fw_version < 0x020000) {
 		/*
 		 * byte 0:  D   U  p1  p2   1  p3   R   L
 		 * byte 1:  f   0  th  tw  x9  x8  y9  y8

@@ -226,7 +226,7 @@ static void elantech_report_absolute_v1(
 	input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
 	input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
 
-	if ((etd->fw_version_maj == 0x01) &&
+	if (etd->fw_version < 0x020000 &&
 	    (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
 		/* rocker up */
 		input_report_key(dev, BTN_FORWARD, packet[0] & 0x40);

@@ -320,7 +320,7 @@ static int elantech_check_parity_v1(stru
 	unsigned char p1, p2, p3;
 
 	/* Parity bits are placed differently */
-	if (etd->fw_version_maj == 0x01) {
+	if (etd->fw_version < 0x020000) {
 		/* byte 0:  D   U  p1  p2   1  p3   R   L */
 		p1 = (packet[0] & 0x20) >> 5;
 		p2 = (packet[0] & 0x10) >> 4;

@@ -456,7 +456,7 @@ static void elantech_set_input_params(st
 	switch (etd->hw_version) {
 	case 1:
 		/* Rocker button */
-		if ((etd->fw_version_maj == 0x01) &&
+		if (etd->fw_version < 0x020000 &&
 		    (etd->capabilities & ETP_CAP_HAS_ROCKER)) {
 			__set_bit(BTN_FORWARD, dev->keybit);
 			__set_bit(BTN_BACK, dev->keybit);

@@ -685,15 +685,14 @@ int elantech_init(struct psmouse *psmous
 		pr_err("elantech.c: failed to query firmware version.\n");
 		goto init_fail;
 	}
-	etd->fw_version_maj = param[0];
-	etd->fw_version_min = param[2];
+
+	etd->fw_version = (param[0] << 16) | (param[1] << 8) | param[2];
 
 	/*
 	 * Assume every version greater than this is new EeePC style
 	 * hardware with 6 byte packets
 	 */
-	if ((etd->fw_version_maj == 0x02 && etd->fw_version_min >= 0x30) ||
-	    etd->fw_version_maj > 0x02) {
+	if (etd->fw_version >= 0x020030) {
 		etd->hw_version = 2;
 		/* For now show extra debug information */
 		etd->debug = 1;

@@ -703,8 +702,9 @@ int elantech_init(struct psmouse *psmous
 		etd->hw_version = 1;
 		etd->paritycheck = 1;
 	}
-	pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d\n",
-		etd->hw_version, etd->fw_version_maj, etd->fw_version_min);
+
+	pr_info("elantech.c: assuming hardware version %d, firmware version %d.%d.%d\n",
+		etd->hw_version, param[0], param[1], param[2]);
 
 	if (synaptics_send_cmd(psmouse, ETP_CAPABILITIES_QUERY, param)) {
 		pr_err("elantech.c: failed to query capabilities.\n");

@@ -719,8 +719,8 @@ int elantech_init(struct psmouse *psmous
 	 * a touch action starts causing the mouse cursor or scrolled page
 	 * to jump. Enable a workaround.
 	 */
-	if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
-		pr_info("elantech.c: firmware version 2.34 detected, "
+	if (etd->fw_version == 0x020022) {
+		pr_info("elantech.c: firmware version 2.0.34 detected, "
 			"enabling jumpy cursor workaround\n");
 		etd->jumpy_cursor = 1;
 	}

@@ -100,11 +100,10 @@ struct elantech_data {
 	unsigned char reg_26;
 	unsigned char debug;
 	unsigned char capabilities;
-	unsigned char fw_version_maj;
-	unsigned char fw_version_min;
-	unsigned char hw_version;
 	unsigned char paritycheck;
 	unsigned char jumpy_cursor;
+	unsigned char hw_version;
+	unsigned int  fw_version;
 	unsigned char parity[256];
 };
 

@@ -574,6 +574,24 @@ static struct attribute_group elantech_a
 	.attrs = elantech_attrs,
 };
 
+static bool elantech_is_signature_valid(const unsigned char *param)
+{
+	static const unsigned char rates[] = { 200, 100, 80, 60, 40, 20, 10 };
+	int i;
+
+	if (param[0] == 0)
+		return false;
+
+	if (param[1] == 0)
+		return true;
+
+	for (i = 0; i < ARRAY_SIZE(rates); i++)
+		if (param[2] == rates[i])
+			return false;
+
+	return true;
+}
+
 /*
  * Use magic knock to detect Elantech touchpad
  */

@@ -617,7 +635,7 @@ int elantech_detect(struct psmouse *psmo
 	pr_debug("elantech.c: Elantech version query result 0x%02x, 0x%02x, 0x%02x.\n",
 		 param[0], param[1], param[2]);
 
-	if (param[0] == 0 || param[1] != 0) {
+	if (!elantech_is_signature_valid(param)) {
 		if (!force_elantech) {
 			pr_debug("elantech.c: Probably not a real Elantech touchpad. Aborting.\n");
 			return -1;

@@ -182,7 +182,6 @@ static void elantech_report_absolute_v1(
 	struct elantech_data *etd = psmouse->private;
 	unsigned char *packet = psmouse->packet;
 	int fingers;
-	static int old_fingers;
 
 	if (etd->fw_version < 0x020000) {
 		/*

@@ -200,10 +199,13 @@ static void elantech_report_absolute_v1(
 	}
 
 	if (etd->jumpy_cursor) {
-		/* Discard packets that are likely to have bogus coordinates */
-		if (fingers > old_fingers) {
+		if (fingers != 1) {
+			etd->single_finger_reports = 0;
+		} else if (etd->single_finger_reports < 2) {
+			/* Discard first 2 reports of one finger, bogus */
+			etd->single_finger_reports++;
 			elantech_debug("elantech.c: discarding packet\n");
-			goto discard_packet_v1;
+			return;
 		}
 	}
 

@@ -235,9 +237,6 @@ static void elantech_report_absolute_v1(
 	}
 
 	input_sync(dev);
-
- discard_packet_v1:
-	old_fingers = fingers;
 }
 
 /*

@@ -733,14 +732,14 @@ int elantech_init(struct psmouse *psmous
 	etd->capabilities = param[0];
 
 	/*
-	 * This firmware seems to suffer from misreporting coordinates when
+	 * This firmware suffers from misreporting coordinates when
 	 * a touch action starts causing the mouse cursor or scrolled page
 	 * to jump. Enable a workaround.
 	 */
-	if (etd->fw_version == 0x020022) {
-		pr_info("elantech.c: firmware version 2.0.34 detected, "
+	if (etd->fw_version == 0x020022 || etd->fw_version == 0x020600) {
+		pr_info("elantech.c: firmware version 2.0.34/2.6.0 detected, "
 			"enabling jumpy cursor workaround\n");
-		etd->jumpy_cursor = 1;
+		etd->jumpy_cursor = true;
 	}
 
 	if (elantech_set_absolute_mode(psmouse)) {

@@ -100,10 +100,11 @@ struct elantech_data {
 	unsigned char reg_26;
 	unsigned char debug;
 	unsigned char capabilities;
-	unsigned char paritycheck;
-	unsigned char jumpy_cursor;
+	bool paritycheck;
+	bool jumpy_cursor;
 	unsigned char hw_version;
-	unsigned int  fw_version;
+	unsigned int fw_version;
+	unsigned int single_finger_reports;
 	unsigned char parity[256];
 };
 

@@ -68,6 +68,11 @@ bool FirmwareDownloadCode(struct net_dev
 
 		/* Allocate skb buffer to contain firmware info and tx descriptor info. */
 		skb  = dev_alloc_skb(frag_length);
+		if (skb == NULL) {
+			RT_TRACE(COMP_ERR, "(%s): unable to alloc skb buffer\n",
+								__func__);
+			goto cmdsend_downloadcode_fail;
+		}
 		memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
 
 		tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);

@@ -56,6 +56,12 @@ SendTxCommandPacket(
 
 	//Get TCB and local buffer from common pool. (It is shared by CmdQ, MgntQ, and USB coalesce DataQ)
 	skb  = dev_alloc_skb(USB_HWDESC_HEADER_LEN + DataLen + 4);
+	if (skb == NULL) {
+		RT_TRACE(COMP_ERR, "(%s): unable to alloc skb buffer\n",
+								__func__);
+		rtStatus = false;
+		return rtStatus;
+	}
 	memcpy((unsigned char *)(skb->cb),&dev,sizeof(dev));
 	tcb_desc = (cb_desc*)(skb->cb + MAX_DEV_ADDR_SIZE);
 	tcb_desc->queue_index = TXCMD_QUEUE;

@@ -959,10 +959,11 @@ static int proc_get_stats_rx(char *page,
 	return len;
 }
 
-void rtl8192_proc_module_init(void)
+int rtl8192_proc_module_init(void)
 {
 	RT_TRACE(COMP_INIT, "Initializing proc filesystem");
 	rtl8192_proc=create_proc_entry(RTL819xU_MODULE_NAME, S_IFDIR, init_net.proc_net);
+	return rtl8192_proc ? 0 : -ENOMEM;
 }
 
 

@@ -7564,35 +7565,63 @@ static int __init rtl8192_usb_module_ini
 	ret = ieee80211_crypto_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_init() failed %d\n", ret);
-		return ret;
+		goto fail_crypto;
 	}
 
 	ret = ieee80211_crypto_tkip_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_tkip_init() failed %d\n",
 			ret);
-		return ret;
+		goto fail_crypto_tkip;
 	}
 
 	ret = ieee80211_crypto_ccmp_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_ccmp_init() failed %d\n",
 			ret);
-		return ret;
+		goto fail_crypto_ccmp;
 	}
 
 	ret = ieee80211_crypto_wep_init();
 	if (ret) {
 		printk(KERN_ERR "ieee80211_crypto_wep_init() failed %d\n", ret);
-		return ret;
+		goto fail_crypto_wep;
 	}
 
 	printk(KERN_INFO "\nLinux kernel driver for RTL8192 based WLAN cards\n");
 	printk(KERN_INFO "Copyright (c) 2007-2008, Realsil Wlan\n");
 	RT_TRACE(COMP_INIT, "Initializing module");
 	RT_TRACE(COMP_INIT, "Wireless extensions version %d", WIRELESS_EXT);
-	rtl8192_proc_module_init();
-	return usb_register(&rtl8192_usb_driver);
+
+	ret = rtl8192_proc_module_init();
+	if (ret) {
+		pr_err("rtl8192_proc_module_init() failed %d\n", ret);
+		goto fail_proc;
+	}
+
+	ret = usb_register(&rtl8192_usb_driver);
+	if (ret) {
+		pr_err("usb_register() failed %d\n", ret);
+		goto fail_usb;
+	}
+
+	return 0;
+
+fail_usb:
+	rtl8192_proc_module_remove();
+fail_proc:
+	ieee80211_crypto_wep_exit();
+fail_crypto_wep:
+	ieee80211_crypto_ccmp_exit();
+fail_crypto_ccmp:
+	ieee80211_crypto_tkip_exit();
+fail_crypto_tkip:
+	ieee80211_crypto_deinit();
+fail_crypto:
+#ifdef CONFIG_IEEE80211_DEBUG
+	ieee80211_debug_exit();
+#endif
+	return ret;
 }
 
 

@@ -25,6 +25,7 @@
  */
 
 #include <linux/vmalloc.h>
+#include <linux/notifier.h>
 
 #undef LOOP_TEST
 #undef DUMP_RX

@@ -160,6 +161,8 @@ MODULE_PARM_DESC(channels," Channel bitm
 static int __devinit rtl8192_usb_probe(struct usb_interface *intf,
 			 const struct usb_device_id *id);
 static void __devexit rtl8192_usb_disconnect(struct usb_interface *intf);
+static const struct net_device_ops rtl8192_netdev_ops;
+static struct notifier_block proc_netdev_notifier;
 
 static struct usb_driver rtl8192_usb_driver = {
 	.name		= RTL819xU_MODULE_NAME,	          /* Driver name   */

@@ -961,14 +964,22 @@ static int proc_get_stats_rx(char *page,
 
 int rtl8192_proc_module_init(void)
 {
+	int ret;
+
 	RT_TRACE(COMP_INIT, "Initializing proc filesystem");
 	rtl8192_proc=create_proc_entry(RTL819xU_MODULE_NAME, S_IFDIR, init_net.proc_net);
-	return rtl8192_proc ? 0 : -ENOMEM;
+	if (!rtl8192_proc)
+		return -ENOMEM;
+	ret = register_netdevice_notifier(&proc_netdev_notifier);
+	if (ret)
+		remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
+	return ret;
 }
 
 
 void rtl8192_proc_module_remove(void)
 {
+	unregister_netdevice_notifier(&proc_netdev_notifier);
 	remove_proc_entry(RTL819xU_MODULE_NAME, init_net.proc_net);
 }
 

@@ -996,8 +1007,7 @@ void rtl8192_proc_remove_one(struct net_
 		remove_proc_entry("registers-e", priv->dir_dev);
 	//	remove_proc_entry("cck-registers",priv->dir_dev);
 	//	remove_proc_entry("ofdm-registers",priv->dir_dev);
-		//remove_proc_entry(dev->name, rtl8192_proc);
-		remove_proc_entry("wlan0", rtl8192_proc);
+		remove_proc_entry(priv->dir_dev->name, rtl8192_proc);
 		priv->dir_dev = NULL;
 	}
 }

@@ -1114,6 +1124,25 @@ void rtl8192_proc_init_one(struct net_de
 		      dev->name);
 	}
 }
+
+static int proc_netdev_event(struct notifier_block *this,
+			     unsigned long event, void *ptr)
+{
+	struct net_device *net_dev = ptr;
+
+	if (net_dev->netdev_ops == &rtl8192_netdev_ops &&
+	    event == NETDEV_CHANGENAME) {
+		rtl8192_proc_remove_one(net_dev);
+		rtl8192_proc_init_one(net_dev);
+	}
+
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block proc_netdev_notifier = {
+	.notifier_call = proc_netdev_event,
+};
+
 /****************************************************************************
    -----------------------------MISC STUFF-------------------------
 *****************************************************************************/

@@ -114,22 +114,8 @@ u32 rt_global_debug_component = \
 static struct usb_device_id rtl8192_usb_id_tbl[] = {
 	/* Realtek */
 	{USB_DEVICE(0x0bda, 0x8171)},
-	{USB_DEVICE(0x0bda, 0x8192)},
-	{USB_DEVICE(0x0bda, 0x8709)},
-	/* Corega */
-	{USB_DEVICE(0x07aa, 0x0043)},
-	/* Belkin */
-	{USB_DEVICE(0x050d, 0x805E)},
 	{USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
-	/* Sitecom */
-	{USB_DEVICE(0x0df6, 0x0031)},
 	{USB_DEVICE(0x0df6, 0x004b)},	/* WL-349 */
-	/* EnGenius */
-	{USB_DEVICE(0x1740, 0x9201)},
-	/* Dlink */
-	{USB_DEVICE(0x2001, 0x3301)},
-	/* Zinwell */
-	{USB_DEVICE(0x5a57, 0x0290)},
 	/* Guillemot */
 	{USB_DEVICE(0x06f8, 0xe031)},
 	//92SU

@@ -112,14 +112,30 @@ u32 rt_global_debug_component = \
 #define CAM_CONTENT_COUNT 8
 
 static struct usb_device_id rtl8192_usb_id_tbl[] = {
-	/* Realtek */
-	{USB_DEVICE(0x0bda, 0x8171)},
-	{USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
-	{USB_DEVICE(0x0df6, 0x004b)},	/* WL-349 */
-	/* Guillemot */
-	{USB_DEVICE(0x06f8, 0xe031)},
-	//92SU
+	{USB_DEVICE(0x0bda, 0x8171)}, /* Realtek */
 	{USB_DEVICE(0x0bda, 0x8172)},
+	{USB_DEVICE(0x0bda, 0x8173)},
+	{USB_DEVICE(0x0bda, 0x8174)},
+	{USB_DEVICE(0x0bda, 0x8712)},
+	{USB_DEVICE(0x0bda, 0x8713)},
+	{USB_DEVICE(0x07aa, 0x0047)},
+	{USB_DEVICE(0x07d1, 0x3303)},
+	{USB_DEVICE(0x07d1, 0x3302)},
+	{USB_DEVICE(0x07d1, 0x3300)},
+	{USB_DEVICE(0x1740, 0x9603)},
+	{USB_DEVICE(0x1740, 0x9605)},
+	{USB_DEVICE(0x050d, 0x815F)},
+	{USB_DEVICE(0x06f8, 0xe031)},
+	{USB_DEVICE(0x7392, 0x7611)},
+	{USB_DEVICE(0x7392, 0x7612)},
+	{USB_DEVICE(0x7392, 0x7622)},
+	{USB_DEVICE(0x0DF6, 0x0045)},
+	{USB_DEVICE(0x0E66, 0x0015)},
+	{USB_DEVICE(0x0E66, 0x0016)},
+	{USB_DEVICE(0x0b05, 0x1786)},
+	/* these are not in the official list */
+	{USB_DEVICE(0x050d, 0x815F)}, /* Belkin F5D8053 v6 */
+	{USB_DEVICE(0x0df6, 0x004b)}, /* WL-349 */
 	{}
 };
 

@@ -1424,11 +1424,11 @@ void usb_set_device_state(struct usb_dev
 					|| new_state == USB_STATE_SUSPENDED)
 				;	/* No change to wakeup settings */
 			else if (new_state == USB_STATE_CONFIGURED)
-				device_init_wakeup(&udev->dev,
+				device_set_wakeup_capable(&udev->dev,
 					(udev->actconfig->desc.bmAttributes
 					 & USB_CONFIG_ATT_WAKEUP));
 			else
-				device_init_wakeup(&udev->dev, 0);
+				device_set_wakeup_capable(&udev->dev, 0);
 		}
 		if (udev->state == USB_STATE_SUSPENDED &&
 			new_state != USB_STATE_SUSPENDED)

@@ -1786,10 +1786,18 @@ int usb_new_device(struct usb_device *ud
 {
 	int err;
 
-	/* Increment the parent's count of unsuspended children */
-	if (udev->parent)
+	if (udev->parent) {
+		/* Increment the parent's count of unsuspended children */
 		usb_autoresume_device(udev->parent);
 
+		/* Initialize non-root-hub device wakeup to disabled;
+		 * device (un)configuration controls wakeup capable
+		 * sysfs power/wakeup controls wakeup enabled/disabled
+		 */
+		device_init_wakeup(&udev->dev, 0);
+		device_set_wakeup_enable(&udev->dev, 1);
+	}
+
 	err = usb_enumerate_device(udev);	/* Read descriptors */
 	if (err < 0)
 		goto fail;

@@ -1795,7 +1795,6 @@ int usb_new_device(struct usb_device *ud
 		 * sysfs power/wakeup controls wakeup enabled/disabled
 		 */
 		device_init_wakeup(&udev->dev, 0);
-		device_set_wakeup_enable(&udev->dev, 1);
 	}
 
 	err = usb_enumerate_device(udev);	/* Read descriptors */

@@ -65,8 +65,8 @@
 #define ALLOW_SERIAL_NUMBER
 
 static const char *format_topo =
-/* T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd */
-"\nT:  Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%3s MxCh=%2d\n";
+/* T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=dddd MxCh=dd */
+"\nT:  Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%-4s MxCh=%2d\n";
 
 static const char *format_string_manufacturer =
 /* S:  Manufacturer=xxxx */

@@ -510,11 +510,13 @@ static ssize_t usb_device_dump(char __us
 		speed = "1.5"; break;
 	case USB_SPEED_UNKNOWN:		/* usb 1.1 root hub code */
 	case USB_SPEED_FULL:
-		speed = "12 "; break;
+		speed = "12"; break;
 	case USB_SPEED_HIGH:
 		speed = "480"; break;
+	case USB_SPEED_SUPER:
+		speed = "5000"; break;
 	default:
-		speed = "?? ";
+		speed = "??";
 	}
 	data_end = pages_start + sprintf(pages_start, format_topo,
 			bus->busnum, level, parent_devnum,

@@ -15,7 +15,7 @@
  * fuzziness in the current usage value of IDs that are being used on different
  * nodes in the cluster simultaneously.  So, it is possible for a user on
  * multiple nodes to overrun their quota, but that overrun is controlable.
- * Since quota tags are part of transactions, there is no need to a quota check
+ * Since quota tags are part of transactions, there is no need for a quota check
  * program to be run on node crashes or anything like that.
  *
  * There are couple of knobs that let the administrator manage the quota

@@ -65,13 +65,6 @@
 #define QUOTA_USER 1
 #define QUOTA_GROUP 0
 
-struct gfs2_quota_host {
-	u64 qu_limit;
-	u64 qu_warn;
-	s64 qu_value;
-	u32 qu_ll_next;
-};
-
 struct gfs2_quota_change_host {
 	u64 qc_change;
 	u32 qc_flags; /* GFS2_QCF_... */

@@ -617,33 +610,19 @@ static void do_qc(struct gfs2_quota_data
 	mutex_unlock(&sdp->sd_quota_mutex);
 }
 
-static void gfs2_quota_in(struct gfs2_quota_host *qu, const void *buf)
-{
-	const struct gfs2_quota *str = buf;
-
-	qu->qu_limit = be64_to_cpu(str->qu_limit);
-	qu->qu_warn = be64_to_cpu(str->qu_warn);
-	qu->qu_value = be64_to_cpu(str->qu_value);
-	qu->qu_ll_next = be32_to_cpu(str->qu_ll_next);
-}
-
-static void gfs2_quota_out(const struct gfs2_quota_host *qu, void *buf)
-{
-	struct gfs2_quota *str = buf;
-
-	str->qu_limit = cpu_to_be64(qu->qu_limit);
-	str->qu_warn = cpu_to_be64(qu->qu_warn);
-	str->qu_value = cpu_to_be64(qu->qu_value);
-	str->qu_ll_next = cpu_to_be32(qu->qu_ll_next);
-	memset(&str->qu_reserved, 0, sizeof(str->qu_reserved));
-}
-
 /**
- * gfs2_adjust_quota
+ * gfs2_adjust_quota - adjust record of current block usage
+ * @ip: The quota inode
+ * @loc: Offset of the entry in the quota file
+ * @change: The amount of change to record
+ * @qd: The quota data
  *
  * This function was mostly borrowed from gfs2_block_truncate_page which was
  * in turn mostly borrowed from ext3
+ *
+ * Returns: 0 or -ve on error
  */
+
 static int gfs2_adjust_quota(struct gfs2_inode *ip, loff_t loc,
 			     s64 change, struct gfs2_quota_data *qd)
 {

@@ -655,8 +634,7 @@ static int gfs2_adjust_quota(struct gfs2
 	struct buffer_head *bh;
 	struct page *page;
 	void *kaddr;
-	char *ptr;
-	struct gfs2_quota_host qp;
+	struct gfs2_quota *qp;
 	s64 value;
 	int err = -EIO;
 

@@ -700,18 +678,13 @@ static int gfs2_adjust_quota(struct gfs2
 	gfs2_trans_add_bh(ip->i_gl, bh, 0);
 
 	kaddr = kmap_atomic(page, KM_USER0);
-	ptr = kaddr + offset;
-	gfs2_quota_in(&qp, ptr);
-	qp.qu_value += change;
-	value = qp.qu_value;
-	gfs2_quota_out(&qp, ptr);
+	qp = kaddr + offset;
+	value = (s64)be64_to_cpu(qp->qu_value) + change;
+	qp->qu_value = cpu_to_be64(value);
+	qd->qd_qb.qb_value = qp->qu_value;
 	flush_dcache_page(page);
 	kunmap_atomic(kaddr, KM_USER0);
 	err = 0;
-	qd->qd_qb.qb_magic = cpu_to_be32(GFS2_MAGIC);
-	qd->qd_qb.qb_value = cpu_to_be64(value);
-	((struct gfs2_quota_lvb*)(qd->qd_gl->gl_lvb))->qb_magic = cpu_to_be32(GFS2_MAGIC);
-	((struct gfs2_quota_lvb*)(qd->qd_gl->gl_lvb))->qb_value = cpu_to_be64(value);
 unlock:
 	unlock_page(page);
 	page_cache_release(page);

@@ -740,8 +713,7 @@ static int do_sync(unsigned int num_qd,
 
 	sort(qda, num_qd, sizeof(struct gfs2_quota_data *), sort_qd, NULL);
 	for (qx = 0; qx < num_qd; qx++) {
-		error = gfs2_glock_nq_init(qda[qx]->qd_gl,
-					   LM_ST_EXCLUSIVE,
+		error = gfs2_glock_nq_init(qda[qx]->qd_gl, LM_ST_EXCLUSIVE,
 					   GL_NOCACHE, &ghs[qx]);
 		if (error)
 			goto out;