powerpc/pseries: Enable iSCSI support for a number of cards
PATCH 1/1 powerpc/pseries: Enable iSCSI support for a number of cards
Enable iSCSI support for a number of cards. We had the base networking devices enabled but forgot to enable iSCSI.
Signed-off-by Anton Blanchard <[email protected]>
---
arch/powerpc/configs/pseries_defconfig +6 -0
@@ -146,12 +146,18 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m CONFIG_SCSI_IBMVSCSI=y CONFIG_SCSI_IBMVFC=m CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_IPR=y CONFIG_SCSI_QLA_FC=m +CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m CONFIG_ATA=y # CONFIG_ATA_SFF is not set
PATCH 1/1 powerpc/pseries: Enable iSCSI support for a number of cards
Enable iSCSI support for a number of cards. We had the base networking devices enabled but forgot to enable iSCSI.
Signed-off-by Anton Blanchard <[email protected]>
---
v2: I added the bnx2 iscsi twice.
arch/powerpc/configs/pseries_defconfig +5 -0
@@ -146,12 +146,17 @@ CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SAS_ATTRS=m +CONFIG_SCSI_CXGB3_ISCSI=m +CONFIG_SCSI_CXGB4_ISCSI=m +CONFIG_SCSI_BNX2_ISCSI=m +CONFIG_BE2ISCSI=m CONFIG_SCSI_IBMVSCSI=y CONFIG_SCSI_IBMVFC=m CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_IPR=y CONFIG_SCSI_QLA_FC=m +CONFIG_SCSI_QLA_ISCSI=m CONFIG_SCSI_LPFC=m CONFIG_ATA=y # CONFIG_ATA_SFF is not set