ehea: Fix memory hotplug oops
Subsystems (2)
PATCH 1/1 ehea: Fix memory hotplug oops
The ehea driver oopses during memory hotplug if the ports are not up. A simple testcase:
# ifconfig ethX down # echo offline > /sys/devices/system/memory/memory32/state
Oops: Kernel access of bad area, sig: 11 [#1]
last sysfs file: /sys/devices/system/memory/memory32/state
REGS: c000000709393110 TRAP: 0300 Not tainted (2.6.39-rc2-01385-g7ef73bc-dirty)
DAR: 0000000000000000, DSISR: 40000000
...
NIP [c000000000067c98] .__wake_up_common+0x48/0xf0 LR [c00000000006d034] .__wake_up+0x54/0x90
Call Trace: [c00000000006d034] .__wake_up+0x54/0x90 [d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea] [d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea] [c0000000006fc8a8] .notifier_call_chain+0x78/0xf0 [c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0 [c000000000458d78] .memory_notify+0x28/0x40 [c0000000001871d8] .remove_memory+0x208/0x6d0 [c000000000458264] .memory_section_action+0x94/0x140 [c0000000004583ec] .memory_block_change_state+0xdc/0x1d0 [c0000000004585cc] .store_mem_state+0xec/0x160 [c00000000044768c] .sysdev_store+0x3c/0x50 [c00000000020b48c] .sysfs_write_file+0xec/0x1f0 [c00000000018f86c] .vfs_write+0xec/0x1e0 [c00000000018fa88] .SyS_write+0x58/0xd0
To fix this, initialise the waitqueues during port probe instead of port open.
---
drivers/net/ehea/ehea_main.c +3 -3
@@ -2688,9 +2688,6 @@ static int ehea_open(struct net_device *netif_start_queue (dev); } -init_waitqueue_head (&port->swqe_avail_wq); -init_waitqueue_head (&port->restart_wq); -mutex_unlock (&port->port_lock);return ret;
@@ -3278,6 +3275,9 @@ struct ehea_port *ehea_setup_single_portINIT_WORK (&port->reset_task, ehea_reset_port); +init_waitqueue_head (&port->swqe_avail_wq); +init_waitqueue_head (&port->restart_wq); + ret =register_netdev (dev);if (ret) {pr_err ("register_netdev failed. ret=%d\n" , ret);
Quoted 10 lines · Anton Blanchard
The ehea driver oopses during memory hotplug if the ports are not up. A simple testcase:
# ifconfig ethX down # echo offline > /sys/devices/system/memory/memory32/stateOops: Kernel access of bad area, sig: 11 [#1] last sysfs file: /sys/devices/system/memory/memory32/state REGS: c000000709393110 TRAP: 0300 Not tainted
(2.6.39-rc2-01385-g7ef73bc-dirty)
Quoted 20 lines
DAR: 0000000000000000, DSISR: 40000000
...
NIP [c000000000067c98] .__wake_up_common+0x48/0xf0 LR [c00000000006d034] .__wake_up+0x54/0x90Call Trace: [c00000000006d034] .__wake_up+0x54/0x90 [d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea] [d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea] [c0000000006fc8a8] .notifier_call_chain+0x78/0xf0 [c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0 [c000000000458d78] .memory_notify+0x28/0x40 [c0000000001871d8] .remove_memory+0x208/0x6d0 [c000000000458264] .memory_section_action+0x94/0x140 [c0000000004583ec] .memory_block_change_state+0xdc/0x1d0 [c0000000004585cc] .store_mem_state+0xec/0x160 [c00000000044768c] .sysdev_store+0x3c/0x50 [c00000000020b48c] .sysfs_write_file+0xec/0x1f0 [c00000000018f86c] .vfs_write+0xec/0x1e0 [c00000000018fa88] .SyS_write+0x58/0xd0
Quoted 4 lines
To fix this, initialise the waitqueues during port probe instead of port open.
Signed-off-by Anton Blanchard <[email protected]>
From: Breno Leitao <[email protected]>
Date: Wed, 11 May 2011 09:46:51 -0300
Quoted 32 lines · Anton Blanchard
Quoted 10 lines
The ehea driver oopses during memory hotplug if the ports are not up. A simple testcase:
# ifconfig ethX down # echo offline > /sys/devices/system/memory/memory32/stateOops: Kernel access of bad area, sig: 11 [#1] last sysfs file: /sys/devices/system/memory/memory32/state REGS: c000000709393110 TRAP: 0300 Not tainted(2.6.39-rc2-01385-g7ef73bc-dirty)
Quoted 20 lines
DAR: 0000000000000000, DSISR: 40000000
...
NIP [c000000000067c98] .__wake_up_common+0x48/0xf0 LR [c00000000006d034] .__wake_up+0x54/0x90Call Trace: [c00000000006d034] .__wake_up+0x54/0x90 [d000000006bb6270] .ehea_rereg_mrs+0x140/0x730 [ehea] [d000000006bb69c4] .ehea_mem_notifier+0x164/0x170 [ehea] [c0000000006fc8a8] .notifier_call_chain+0x78/0xf0 [c0000000000b3d70] .__blocking_notifier_call_chain+0x70/0xb0 [c000000000458d78] .memory_notify+0x28/0x40 [c0000000001871d8] .remove_memory+0x208/0x6d0 [c000000000458264] .memory_section_action+0x94/0x140 [c0000000004583ec] .memory_block_change_state+0xdc/0x1d0 [c0000000004585cc] .store_mem_state+0xec/0x160 [c00000000044768c] .sysdev_store+0x3c/0x50 [c00000000020b48c] .sysfs_write_file+0xec/0x1f0 [c00000000018f86c] .vfs_write+0xec/0x1e0 [c00000000018fa88] .SyS_write+0x58/0xd0
Quoted 5 lines
Quoted 4 lines
To fix this, initialise the waitqueues during port probe instead of port open.
Signed-off-by Anton Blanchard <[email protected]>Acked-by Breno Leitao <[email protected]>
Applied to net-2.6, thanks.