x86_64
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Thanks!
Jaap
Quoted 4 lines · Jaap de Jong
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Can we settle on a name please for i want to add a qemu machine for testing x86_64?
x8664
amd64
...
Opinions?
thanks,
HI,
Quoted 6 lines · Bernhard Reutner-Fischer
Quoted 4 lines · Jaap de Jong
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Quoted 9 lines
Can we settle on a name please for i want to add a qemu machine for testing
x86_64?x8664
amd64
...Opinions?
amd64 like debian, gentoo & co
Eric
Quoted 6 lines · Bernhard Reutner-Fischer
Quoted 4 lines · Jaap de Jong
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Quoted 8 lines
Can we settle on a name please for i want to add a qemu machine for testing
x86_64?x8664
amd64
...Opinions?
"x86_64" seems to be what's currently used as the architecture name. If you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.
p.
Quoted 13 lines · Phil Blundell
Quoted 12 lines · Bernhard Reutner-Fischer
Quoted 4 lines · Jaap de Jong
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Can we settle on a name please for i want to add a qemu machine for testing
x86_64?x8664
amd64
...
Quoted 7 lines
Quoted 1 line
Opinions?
"
x86_64" seems to be what's currently used as the architecture name. If you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.p.
So I'm guessing it is not possible at this very moment?
Jaap.
Quoted 16 lines · Jaap de Jong
Quoted 14 lines · Phil Blundell
Quoted 13 lines · Bernhard Reutner-Fischer
Quoted 4 lines · Jaap de Jong
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Can we settle on a name please for i want to add a qemu machine for testing
x86_64?x8664
amd64
...Opinions?
Quoted 8 lines
Quoted 6 lines
"
x86_64" seems to be what's currently used as the architecture name. If you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.p.
So I'm guessing it is not possible at this very moment?
Depends what you mean by "not possible". There doesn't seem to be any existing machine config file which targets x86_64, but I don't think there is any reason that you couldn't trivially create one; something along the lines of:
$ cat >conf/machine/x84_64-generic.conf <<EOF TARGET_ARCH = "x86_64" GLIBC_ADDONS = "nptl" GLIBC_EXTRA_OECONF = "--with-tls" PREFERRED_PROVIDER_virtual/kernel = "linux" KERNEL_IMAGETYPE = "bzImage" EOF $
p.
Quoted 32 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Can we settle on a name please for i want to add a qemu machine for testing
x86_64?x8664
amd64
...Quoted 8 lines
Quoted 7 lines
Quoted 1 line
Opinions?
"
x86_64" seems to be what's currently used as the architecture name. If you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.p.
So I'm guessing it is not possible at this very moment?
Depends what you mean by "not possible". There doesn't seem to be any existing machine config file which targets
x86_64, but I don't think there is any reason that you couldn't trivially create one; something along the lines of:$ cat>conf/machine/x84_64-generic.conf<<EOF TARGET_ARCH = "x86_64" GLIBC_ADDONS = "nptl" GLIBC_EXTRA_OECONF = "--with-tls" PREFERRED_PROVIDER_virtual/kernel = "linux" KERNEL_IMAGETYPE = "bzImage" EOF $
Quoted 1 line
p.
Will try that; is there any 64 bit output to be expected? Jaap.
Quoted 32 lines
Quoted 32 lines
Quoted 10 lines
Quoted 10 lines
Quoted 10 lines
Quoted 3 lines
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Can we settle on a name please for i want to add a qemu machine for testing
x86_64?x8664
amd64
...Quoted 8 lines
Quoted 7 lines
Quoted 1 line
Opinions?
"
x86_64" seems to be what's currently used as the architecture name. If you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.p.
So I'm guessing it is not possible at this very moment?
Depends what you mean by "not possible". There doesn't seem to be any existing machine config file which targets
x86_64, but I don't think there is any reason that you couldn't trivially create one; something along the lines of:$ cat>conf/machine/x84_64-generic.conf<<EOF TARGET_ARCH = "x86_64" GLIBC_ADDONS = "nptl" GLIBC_EXTRA_OECONF = "--with-tls" PREFERRED_PROVIDER_virtual/kernel = "linux" KERNEL_IMAGETYPE = "bzImage" EOF $
Quoted 4 lines
Quoted 1 line
p.
Will try that; is there any 64 bit output to be expected? Jaap.
bitbake ends with
| /media/OpenEmbedded/release-2010.12/tmp/sysroots/i686-linux/usr/x86_64/x86_64-angstrom-linux/bin/ld: cannot find /lib64/libc.so.6 inside /media/OpenEmbedded/release-2010.12/tmp/sysroots/x86_64-angstrom-linux
There is only a lib directory and no lib64 directory...
Jaap
Quoted 7 lines · Jaap de Jong
bitbake ends with
| /media/OpenEmbedded/release-2010.12/tmp/sysroots/i686-linux/usr/x86_64/x86_64-angstrom-linux/bin/ld:
cannot find/lib64/libc.so.6inside /media/OpenEmbedded/release-2010.12/tmp/sysroots/x86_64-angstrom-linuxThere is only a lib directory and no lib64 directory...
It seems that there is some disagreement between binutils and your C library about where the libs should be stored. Which DISTRO configuration are you using?
If you make a symlink from lib -> lib64 inside the sysroot, does that allow the build to continue?
p.
Quoted 11 lines · Phil Blundell
Quoted 7 lines · Jaap de Jong
bitbake ends with
| /media/OpenEmbedded/release-2010.12/tmp/sysroots/i686-linux/usr/x86_64/x86_64-angstrom-linux/bin/ld:
cannot find/lib64/libc.so.6inside /media/OpenEmbedded/release-2010.12/tmp/sysroots/x86_64-angstrom-linuxThere is only a lib directory and no lib64 directory...
It seems that there is some disagreement between binutils and your C library about where the libs should be stored. Which DISTRO configuration are you using?
Build Configuration:BB_VERSION = "1.8.18"METADATA_BRANCH = "release-2010.12"METADATA_REVISION = "dec3967"
TARGET_ARCH = "x86_64" TARGET_OS = "linux" MACHINE = "x86_64-generic" DISTRO = "angstrom" DISTRO_VERSION = "2010.12"
Quoted 3 lines
If you make a symlink from lib -> lib64 inside the sysroot, does that allow the build to continue?
Tried that one...
| /media/OpenEmbedded/release-2010.12/tmp/sysroots/i686-linux/usr/x86_64/x86_64-angstrom-linux/bin/ld: cannot find /lib64/libc.so.6 inside /media/OpenEmbedded/release-2010.12/tmp/sysroots/x86_64-angstrom-linux
so the answer is: no...
Jaap
Quoted 1 line · Jaap de Jong
TARGET_ARCH= "x86_64"
did this ever work? OE uses hardcoded 'lib' (instead of 'lib64') at various places. At least gcc has
| #define GLIBC_DYNAMIC_LINKER64 "/lib64/ld-linux-x86-64.so.2"
which causes 64 bit binaries to look for the interpreter at /lib64.
I recall issues with openssl too which autodetects lib64 directories but OE packages lib only.
Enrico
Quoted 6 lines · Enrico Scholz
Quoted 1 line · Jaap de Jong
TARGET_ARCH= "x86_64"did this ever work? OE uses hardcoded 'lib' (instead of 'lib64') at various places.
Hi Enrico,
This is my MACHINE config:
TARGET_ARCH = "x86_64"
# We can't reuse the same -native builds as 32-bit machines, because
# ours need to be staged into staging/blah/lib64 instead of lib. # Set blah to x86_64-buildoe64-linux to keep them separate. BUILD_VENDOR = "-buildoe64"
base_libdir = "${base_prefix}/lib64"
libdir = "${exec_prefix}/lib64"
# Some packages install files into /lib/packagename, not /lib64/packagename. FILES_${PN} += "${prefix}/lib/${PN}/*"
FILES_${PN}-dbg += "${prefix}/lib/${PN}/.debug"
# glibc's sysdeps/unix/sysv/linux/configure script only fixes
# libc_cv_slibdir if prefix is "/usr". With prefix of "", we need to fix it # so libc libs don't get installed into /lib. export libc_cv_slibdir="/lib64"
--------
I had to amend gcc-cross-intermediate:
do_compile_prepend() {
# On x86_64, glibc-initial stages crti.o to
# x86_64-oe-linux/lib64/crti.o.
# When gcc-cross-intermediate tries to build libgcc, it looks
# for x86_64-oe-linux/lib/../lib64/crti.o.
# Create the "lib" dir so this shenanigan works.
install -d ${STAGING_DIR_TARGET}/lib
}And gcc-cross:
# glibc only built the 64-bit stubs, so don't try to build a 32-bit gcc # XXX maybe belongs in oe recipes/gcc/gcc-cross4.inc EXTRA_OECONF_append_x86_64 = " --disable-multilib"
I think that's it - for the recipes I build, all the other fixes have been pushed long ago.
Mike
Quoted 8 lines · Michael Smith
Quoted 2 lines
did this ever work? OE uses hardcoded 'lib' (instead of 'lib64') at various places.
This is my MACHINE config:
...
# Some packages install files into/lib/packagename, not/lib64/packagename. FILES_${PN} += "${prefix}/lib/${PN}/*"
FILES_${PN}-dbg += "${prefix}/lib/${PN}/.debug"
I think, this will break/change some packages...
After creating (manually) lib64 -> lib symlinks in the sysroot, I managed to build a non trivial 64-bit system (e.g. with vdr and perl stuff) with (nearly) standard settings (2011.03-maintenance). But necessary tricks like the BUILD_VENDOR and some minor fixes (like these in openssl) caused me to see this as very experimental.
Quoted 2 lines
And gcc-cross:
EXTRA_OECONF_append_x86_64= " --disable-multilib"
should not be needed anymore; flag is set by847c0dadb9f55af5cc4556486cde3d9dcc2129af
Enrico
Quoted 10 lines · Phil Blundell
Quoted 9 lines · Bernhard Reutner-Fischer
Quoted 4 lines · Jaap de Jong
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
Can we settle on a name please for i want to add a qemu machine for testing
x86_64?
Quoted 7 lines
Quoted 5 lines
x8664
amd64
...Opinions?
"
x86_64" seems to be what's currently used as the architecture name. If
That doesn't work as arch-dependent e.g. append, does it.
FOO_append_x86_64 = '-mcpu=barcelona'
Quoted 3 lines
you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.
Well, I was talking about the arch.
------- Original message -------
Quoted 8 lines
From: Bernhard Reutner-Fischer <[email protected]>
Quoted 2 lines · Phil Blundell
"
x86_64" seems to be what's currently used as the architecture name. IfThat doesn't work as arch-dependent e.g. append, does it.
FOO_append_x86_64= '-mcpu=barcelona'
I believe it does work.
Mike
Quoted 6 lines · Bernhard Reutner-Fischer
Quoted 1 line · Phil Blundell
"
x86_64" seems to be what's currently used as the architecture name. IfThat doesn't work as arch-dependent e.g. append, does it.
FOO_append_x86_64= '-mcpu=barcelona'
It seems to work just fine for me. What goes wrong for you?
$ cat >t.bb <<EOF TARGET_ARCH = "x86_64" x = "a" x_append_x86_64 = "b" x_append_x87_65 = "c" EOF $ bitbake -e -b t.bb |grep ^x x="ab" $
p.
Quoted 9 lines · Phil Blundell
Quoted 6 lines · Bernhard Reutner-Fischer
Quoted 1 line · Phil Blundell
"
x86_64" seems to be what's currently used as the architecture name. IfThat doesn't work as arch-dependent e.g. append, does it.
FOO_append_x86_64= '-mcpu=barcelona'It seems to work just fine for me. What goes wrong for you?
It was OVERRIDES as Enrico mentioned.
Given that both khem in (IIRC) 2009 and me a year later stumbled across the name and abandoned the thing in consequence, settling on an example name would be nice -- nowadays i would just use amd64 but that won't happen anytime soon, unfortunately.
Both patches should be in the old patchwork, for reference.
cheers,
Quoted 4 lines · Phil Blundell
"
x86_64" seems to be what's currently used as the architecture name. If you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.
OVERRIDES don't work correctly with this. E.g. (bitbake 1.10) a recipe with
| xx = "default"
| xx_x86_64 = "XX"
results into
| OVERRIDES="...:x86_64:..." | # xx_x86_64=XX | xx_x86_64="XX" | # xx=default | xx="default"
Adding an additional "x86-64" to OVERRIDES in the machine configuration and using it by
| xx_x86-64 = "XX"
gives the expected
| # xx_x86-64=XX | xx_x86-64="XX" | # xx=XX | xx="XX"
Enrico
Quoted 13 lines · Enrico Scholz
Quoted 4 lines · Phil Blundell
"
x86_64" seems to be what's currently used as the architecture name. If you want a value for ${MACHINE} then I guess something like "x86_64-generic" would do. I don't think there's any prohibition against underscores in machine names.OVERRIDES don't work correctly with this. E.g. (bitbake 1.10) a recipe with
| xx = "default"
|xx_x86_64= "XX"
Quoted 7 lines
results into
| OVERRIDES="...:x86_64:..." | # xx_x86_64=XX | xx_x86_64="XX" | # xx=default | xx="default"
Yes, you're right. But it seems as though _append overrides do work (see my other mail to Bernhard Reutner-Fischer), and I don't think the bitbake documentation notes that underscores are prohibited in OVERRIDES. So I think this is a bug in bitbake and should be fixed there.
Changing the architecture to x86-64 would be a possibility, but clearly there are already folks using x86_64 (since there are files in site/ with that naming, for example) so this seems like it would be best avoided. Also it would require a tmpdir version bump to take care of BUILD_SYS for all the people who are cross compiling from x86_64, and that also seems like something best avoided if possible.
p.
Quoted 1 line · Phil Blundell
Changing the architecture to x86-64 would be a possibility,
no; will cause too much pain because all the ./config.guess scripts expect 'x86_64'.
I kept TARGET_ARCH='x86_64' but added an additional OVERRIDES where '_' is replaced by '-'.
Enrico
Quoted 4 lines · Jaap de Jong
Hi All,
is there any support for 64 bit intel/amd machines? And if so, how to build for them?
classic oe does not have it but there are patches posted look through mailing list archives
fwiw. oe-core has a working support for x86_64 architecture it will be worthwhile looking at that
-Khem
Quoted 2 lines · Khem Raj
fwiw. oe-core has a working support for
x86_64architecture it will be worthwhile looking at that
How did oe-core solve the problem with OVERRIDES?
p.