XFS TESTS: Add Punch Hole to FSX
PATCH v5 1/3 XFS TESTS: Add Punch Hole to FSX
This patch adds punch hole tests to the fsx stress test.
v1 -> v2:
Corrections to the Makefile have been backed out. This patch needs to be applied on top of
the "xfstests: clean up fallocate configuration tests" patch
The punch hole tests can be disabled with the
-H flag, and will also be disabled if it is
detected that the filesystem does not support
punch hole
v2 -> v4
Punch hole tests and functionality tests have been moved into their own functions. Existing dofallocate routine has been renamed to do_preallocate.
v4 -> v5
The code to test fallocate functionality changed slightly, so the patch has been updated to apply with out err
---
:100644 100644 0eebc70... 0683853... M ltp/fsx.c
ltp/fsx.c | 143 ++++++++++++++++++++++++++++++++++++++++++++++++++++-------- 1 files changed, 124 insertions(+), 19 deletions(-)
ltp/fsx.c +124 -19
@@ -69,6 +69,7 @@ int logcount = 0; /* total ops */#define OP_MAPWRITE 6#define OP_SKIPPED 7#define OP_FALLOCATE 8 +#define OP_PUNCH_HOLE 9#undef PAGE_SIZE#define PAGE_SIZE getpagesize()
@@ -110,6 +111,7 @@ int randomoplen = 1; /* -O flag disables it */int seed =1 ;/* -S flag */ int mapped_writes =1 ;/* -W flag disables */ int fallocate_calls =1 ;/* -F flag disables */ +int punch_hole_calls =1 ;/* -H flag disables */ int mapped_reads =1 ;/* -R flag disables it */ int fsxgoodfd =0 ;int o_direct;/* -Z */
@@ -279,6 +281,14 @@ logdump(void) badoff < lp->args[0] + lp->args[1])prt ("\t******FFFF" );break ; +case OP_PUNCH_HOLE : +prt ("PUNCH HOLE\t0x%x thru 0x%x\t(0x%x bytes)" , + lp->args[0 ], lp->args[0 ] + lp->args[1 ] -1 , + lp->args[1 ]); +if (badoff >= lp->args[0 ] && badoff < + lp->args[0 ] + lp->args[1 ]) +prt ("\t******PPPP" ); +break ;case OP_SKIPPED :prt ("SKIPPED (no operation)" );break ;
@@ -784,10 +794,67 @@ dotruncate(unsigned size) } } +#ifdef FALLOC_FL_PUNCH_HOLE +void +do_punch_hole (unsigned offset,unsigned length) +{ +unsigned end_offset; +int max_offset =0 ; +int max_len =0 ; +int mode =FALLOC_FL_PUNCH_HOLE |FALLOC_FL_KEEP_SIZE ; + +if (length ==0 ) { +if (!quiet && testcalls > simulatedopcount) +prt ("skipping zero length punch hole\n" ); +log4 (OP_SKIPPED ,OP_PUNCH_HOLE , offset, length); +return ; + } + +if (file_size <= (loff_t )offset) { +if (!quiet && testcalls > simulatedopcount) +prt ("skipping hole punch off the end of the file\n" ); +log4 (OP_SKIPPED ,OP_PUNCH_HOLE , offset, length); +return ; + } + + end_offset = offset + length; + +log4 (OP_PUNCH_HOLE , offset, length,0 ); + +if (testcalls <= simulatedopcount) +return ; + +if ((progressinterval && testcalls % progressinterval ==0 ) || + (debug && (monitorstart ==-1 || monitorend ==-1 || + end_offset <= monitorend))) { +prt ("%lu punch\tfrom 0x%x to 0x%x, (0x%x bytes)\n" , testcalls, + offset, offset+length, length); + } +if (fallocate (fd, mode, (loff_t )offset, (loff_t )length) ==-1 ) { +prt ("%punch hole: %x to %x\n" , offset, length); +prterr ("do_punch_hole: fallocate" ); +report_failure (161 ); + } + + + max_offset = offset < file_size ? offset : file_size; + max_len = max_offset + length <= file_size ? length : + file_size - max_offset; +memset (good_buf + max_offset,'\0' , max_len); +} + +#else +void +do_punch_hole (unsigned offset,unsigned length) +{ +return ; +} +#endif +#ifdef FALLOCATE /* fallocate is basically a no-op unless extending, then a lot like a truncate */ void -dofallocate (unsigned offset,unsigned length) +do_preallocate (unsigned offset,unsigned length) {unsigned end_offset;int keep_size;
@@ -831,13 +898,13 @@ dofallocate(unsigned offset, unsigned length)prt ("%lu falloc\tfrom 0x%x to 0x%x\n" , testcalls, offset, length);if (fallocate (fd, keep_size ?FALLOC_FL_KEEP_SIZE :0 , (loff_t )offset, (loff_t )length) ==-1 ) {prt ("fallocate: %x to %x\n" , offset, length); -prterr ("dofallocate: fallocate" ); +prterr ("do_preallocate: fallocate" );report_failure (161 ); } }#else void -dofallocate (unsigned offset,unsigned length) +do_preallocate (unsigned offset,unsigned length) {return ; }
@@ -895,8 +962,7 @@ test(void)unsigned long offset;unsigned long size = maxoplen;unsigned long rv =random (); -unsigned long op = rv % (3 + !lite + mapped_writes + fallocate_calls); - +unsigned long op = rv % (3 + !lite + mapped_writes + fallocate_calls + punch_hole_calls);/* turn off the map read if necessary */ if (op ==2 && !mapped_reads)
@@ -924,6 +990,7 @@ test(void)* TRUNCATE: op = - 3 * MAPWRITE: op = 3 4 * FALLOCATE: op = - 5 +* PUNCH HOLE: op = - 6 */ if (lite ?0 : op ==3 && (style &1 ) ==0 )/* vanilla truncate? */ dotruncate (random () % maxfilelen);
@@ -941,7 +1008,12 @@ test(void) offset %= maxfilelen;if (offset + size > maxfilelen) size = maxfilelen - offset; -dofallocate (offset, size); +do_preallocate (offset, size); + }else if (op ==6 ) { + offset %= maxfilelen; +if (offset + size > maxfilelen) + size = maxfilelen - offset; +do_punch_hole (offset, size); }else if (op ==1 || op == (lite ?3 :4 )) {/* write / mapwrite */ offset %= maxfilelen;
@@ -1013,6 +1085,9 @@ usage(void)#ifdef FALLOCATE " -F: Do not use fallocate (preallocation) calls\n"#endif +#ifdef FALLOC_FL_PUNCH_HOLE +" -H: Do not use punch hole calls\n" +#endif" -L: fsxLite - no file creations & no file size changes\n\ -N numops: total # operations to do (default infinity)\n\ -O: use oplen (see -o flag) for every op (default random)\n\
@@ -1161,6 +1236,43 @@ int aio_rw(int rw, int fd, char *buf, unsigned len, unsigned offset)#endif +void +test_fallocate () +{ +#ifdef FALLOCATE +if (!lite && fallocate_calls) { +if (fallocate (fd,0 ,0 ,1 ) && errno ==EOPNOTSUPP ) { +if (!quiet) +prt ("fsx: main: filesystem does not support fallocate, disabling\n" ); + fallocate_calls =0 ; + }else { +ftruncate (fd,0 ); + } + } +#else /* ! FALLOCATE */ + fallocate_calls =0 ; +#endif + +} + +void +test_punch_hole () +{ +#ifdef FALLOC_FL_PUNCH_HOLE +if (!lite && punch_hole_calls) { +if (fallocate (fd,0 ,0 , +FALLOC_FL_KEEP_SIZE |FALLOC_FL_PUNCH_HOLE ) && + errno ==EOPNOTSUPP ) { + +warn ("main: filesystem does not support fallocate punch hole, disabling" ); + punch_hole_calls =0 ; + } + } +#else /* ! PUNCH HOLE */ + punch_hole_calls =0 ; +#endif +} +int main (int argc,char **argv) {
@@ -1179,7 +1291,7 @@ main(int argc, char **argv)setvbuf (stdout, (char *)0 , _IOLBF,0 );/* line buffered stdout */ -while ((ch =getopt (argc, argv,"b:c:dfl:m:no:p:qr:s:t:w:xyAD:FLN:OP:RS:WZ" )) +while ((ch =getopt (argc, argv,"b:c:dfl:m:no:p:qr:s:t:w:xyAD:FHLN:OP:RS:WZ" )) !=EOF )switch (ch) {case 'b' :
@@ -1276,6 +1388,9 @@ main(int argc, char **argv)case 'F' : fallocate_calls =0 ;break ; +case 'H' : + punch_hole_calls =0 ; +break ;case 'L' : lite =1 ;break ;
@@ -1421,18 +1536,8 @@ main(int argc, char **argv) }else check_trunc_hack (); -#ifdef FALLOCATE -if (!lite && fallocate_calls) { -if (fallocate (fd,0 ,0 ,1 ) && errno ==EOPNOTSUPP ) { -if (!quiet) -prt ("fsx: main: filesystem does not support fallocate, disabling\n" ); - fallocate_calls =0 ; - }else -ftruncate (fd,0 ); - } -#else /* ! FALLOCATE */ - fallocate_calls =0 ; -#endif +test_fallocate (); +test_punch_hole ();while (numops ==-1 || numops--)test ();
Signature · 1 line
1.7.1
Quoted 4 lines · Allison Henderson
This patch adds punch hole tests to the fsx stress test.
Signed-off-by Allison Henderson <[email protected]>
Hey Allison, there are two things you can do that will make life much easier for people to review and apply your patches. First of all, move the version information below to after the "---" line. If you want to keep this information in the git commit log, just move the "---" line after you run the "git format-patch" command.
Secondly, run the command "git config format.thread true"; this is the default in newer versions of git, but apparently you're not using a new enough version of git. You can also use "git send-email --thread" if you don't want to set the git configuration variable. The other possibility is that your mailer is stripping the in-reply-to: and
references: header, so the mail threading is disappearing. I never used vnet.ibm.com's mailer, so I don't know if it's responsible for stripping mail headers, but I tend not to trust VM or Lotus Notes' standard adherence... fortunately for IBM the CIO's who make the purchasing decisions tend not to know the first thing about Internet Mail Standers or RFC's. :-)
- Ted
Quoted 26 lines
v1 -> v2:
Corrections to theMakefilehave been backed out. This patch needs to be applied on top of
the "xfstests: clean up fallocate configuration tests" patchThe punch hole tests can be disabled with the
-H flag, and will also be disabled if it is
detected that the filesystem does not support
punch holev2 -> v4
Punch hole tests and functionality tests have been moved into their own functions. Existing dofallocate routine has been renamed todo_preallocate.v4 -> v5
The code to test fallocate functionality changed slightly, so the patch has been updated to apply with out err
---
:100644 100644 0eebc70... 0683853... Mltp/fsx.cltp/fsx.c | 143 ++++++++++++++++++++++++++++++++++++++++++++++++++++-------- 1 files changed, 124 insertions(+), 19 deletions(-)ltp/fsx.c +0
-0
...
Quoted 18 lines · Ted Ts'o
Hey Allison, there are two things you can do that will make life much easier for people to review and apply your patches. First of all, move the version information below to after the "---" line. If you want to keep this information in the git commit log, just move the "---" line after you run the "git format-patch" command.
Secondly, run the command "git config format.thread true"; this is the default in newer versions of git, but apparently you're not using a new enough version of git. You can also use "git send-email --thread" if you don't want to set the git configuration variable. The other possibility is that your mailer is stripping the in-reply-to: and
references: header, so the mail threading is disappearing. I never used vnet.ibm.com's mailer, so I don't know if it's responsible for stripping mail headers, but I tend not to trust VM or Lotus Notes' standard adherence... fortunately for IBM the CIO's who make the purchasing decisions tend not to know the first thing about Internet Mail Standers or RFC's.:-)
Quoted 1 line
- Ted
Thx Ted! I didn't realize the patches were hard for people to read. I will see if I can get those commands to work, and I will make sure the "---" comes before the version info. Initially I had tried the send-email, but not all of the patches seemed to make it to the lists, so I started using Thunderbird, but I will see if I can figure out what went wrong with send-email. Thx!
Allison Henderson
I'm a bit worried about adding more and more local hacks to our FSX version before resyncing with the official Apple variant that actual has clear licensing. But we didn't let other recent patches be affected by that, so I guess I can't complain this time either and will put it in.