Skip to contentSkip to conversation

Linux 3.0-rc4: regression reconnecting bluetooth headset (A2DP fails)

DISCUSSION Jeremy Fitzhardinge 2 participants 5 messages Jun 24, 2011 – Aug 4, 2011 Bluetooth drivers

lore
Share & tools
lore
#0 lore raw

I have a Nokia BH-905i headset. With a stock F15 kernel, it all works well. With current linux-2.6.git, it fails to reconnect properly.

On connection, the headphones only beep once, whereas they normally beep twice; I think this is one beep per profile, and its only connecting HSP and failing A2DP. In the sound control panel, it either comes up with "profile: off" or with the HSP/HFP (Telephony) profile rather than A2DP, and it fails to switch if I try to change profiles via the sound control panel.

However, if I re-pair the device from scratch each time I use it, it connects properly and it all works fine.

pactl list shows:

Card #2
Name: bluez_card.00_0B_E4_A6_6C_0D
Driver: module-bluetooth-device.c
Owner Module: 23
Properties:
device.description = "Nokia BH-905i"
device.string = "00:0B:E4:A6:6C:0D"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/843/hci0/dev_00_0B_E4_A6_6C_0D" bluez.class = "0x240404"
bluez.name = "Nokia BH-905i"
device.icon_name = "audio-headset-bluetooth" device.intended_roles = "phone"
Profiles:
a2dp: High Fidelity Playback (A2DP) (sinks: 1, sources: 0, priority. 10)
hsp: Telephony Duplex (HSP/HFP) (sinks: 1, sources: 1, priority. 20)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: hsp

If I try to switch profiles on the command line it says:

$ pactl set-card-profile 2 a2dp
Failure: Input/Output error

and /var/log/messages shows:
module-bluetooth-device.c: A2DP is not connected, refused to switch profile

Why isn't A2DP connecting? How can I debug this further?

Thanks,
J

#1 lore raw

Hi Jeremy,

Quoted 37 lines · Jeremy Fitzhardinge

I have a Nokia BH-905i headset. With a stock F15 kernel, it all works well. With current linux-2.6.git, it fails to reconnect properly.

On connection, the headphones only beep once, whereas they normally beep twice; I think this is one beep per profile, and its only connecting HSP and failing A2DP. In the sound control panel, it either comes up with "profile: off" or with the HSP/HFP (Telephony) profile rather than A2DP, and it fails to switch if I try to change profiles via the sound control panel.

However, if I re-pair the device from scratch each time I use it, it connects properly and it all works fine.

pactl list shows:

Card #2
Name: bluez_card.00_0B_E4_A6_6C_0D
Driver: module-bluetooth-device.c
Owner Module: 23
Properties:
device.description = "Nokia BH-905i"
device.string = "00:0B:E4:A6:6C:0D"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/843/hci0/dev_00_0B_E4_A6_6C_0D" bluez.class = "0x240404"
bluez.name = "Nokia BH-905i"
device.icon_name = "audio-headset-bluetooth" device.intended_roles = "phone"
Profiles:
a2dp: High Fidelity Playback (A2DP) (sinks: 1, sources: 0, priority. 10)
hsp: Telephony Duplex (HSP/HFP) (sinks: 1, sources: 1, priority. 20)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: hsp

Quoted 8 lines

If I try to switch profiles on the command line it says:

$ pactl set-card-profile 2 a2dp
Failure: Input/Output error

and /var/log/messages shows:
module-bluetooth-device.c: A2DP is not connected, refused to switch profile

Why isn't A2DP connecting? How can I debug this further?

Can you send the output of hcidump with F15 kernel and with linux-2.6.git kernel?

Gustavo

#2 lore raw
Quoted 45 lines · Gustavo F. Padovan

Hi Jeremy,

Quoted 41 lines · Jeremy Fitzhardinge

I have a Nokia BH-905i headset. With a stock F15 kernel, it all works well. With current linux-2.6.git, it fails to reconnect properly.

On connection, the headphones only beep once, whereas they normally beep twice; I think this is one beep per profile, and its only connecting HSP and failing A2DP. In the sound control panel, it either comes up with "profile: off" or with the HSP/HFP (Telephony) profile rather than A2DP, and it fails to switch if I try to change profiles via the sound control panel.

However, if I re-pair the device from scratch each time I use it, it connects properly and it all works fine.

pactl list shows:

Card #2
Name: bluez_card.00_0B_E4_A6_6C_0D
Driver: module-bluetooth-device.c
Owner Module: 23
Properties:
device.description = "Nokia BH-905i"
device.string = "00:0B:E4:A6:6C:0D"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/843/hci0/dev_00_0B_E4_A6_6C_0D" bluez.class = "0x240404"
bluez.name = "Nokia BH-905i"
device.icon_name = "audio-headset-bluetooth" device.intended_roles = "phone"
Profiles:
a2dp: High Fidelity Playback (A2DP) (sinks: 1, sources: 0, priority. 10)
hsp: Telephony Duplex (HSP/HFP) (sinks: 1, sources: 1, priority. 20)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: hsp

If I try to switch profiles on the command line it says:

$ pactl set-card-profile 2 a2dp
Failure: Input/Output error
Quoted 6 lines
Quoted 4 lines

and /var/log/messages shows:
module-bluetooth-device.c: A2DP is not connected, refused to switch profile

Why isn't A2DP connecting? How can I debug this further?

Can you send the output of hcidump with F15 kernel and with linux-2.6.git kernel?

This is already fixed in
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git

Thanks,
J

#3 lore raw
Quoted 49 lines · Jeremy Fitzhardinge
Quoted 48 lines · Gustavo F. Padovan

Hi Jeremy,

Quoted 44 lines · Jeremy Fitzhardinge

I have a Nokia BH-905i headset. With a stock F15 kernel, it all works well. With current linux-2.6.git, it fails to reconnect properly.

On connection, the headphones only beep once, whereas they normally beep twice; I think this is one beep per profile, and its only connecting HSP and failing A2DP. In the sound control panel, it either comes up with "profile: off" or with the HSP/HFP (Telephony) profile rather than A2DP, and it fails to switch if I try to change profiles via the sound control panel.

However, if I re-pair the device from scratch each time I use it, it connects properly and it all works fine.

pactl list shows:

Card #2
Name: bluez_card.00_0B_E4_A6_6C_0D
Driver: module-bluetooth-device.c
Owner Module: 23
Properties:
device.description = "Nokia BH-905i"
device.string = "00:0B:E4:A6:6C:0D"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/843/hci0/dev_00_0B_E4_A6_6C_0D" bluez.class = "0x240404"
bluez.name = "Nokia BH-905i"
device.icon_name = "audio-headset-bluetooth" device.intended_roles = "phone"
Profiles:
a2dp: High Fidelity Playback (A2DP) (sinks: 1, sources: 0, priority. 10)
hsp: Telephony Duplex (HSP/HFP) (sinks: 1, sources: 1, priority. 20)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: hsp

If I try to switch profiles on the command line it says:

$ pactl set-card-profile 2 a2dp
Failure: Input/Output error

and /var/log/messages shows:
module-bluetooth-device.c: A2DP is not connected, refused to switch profile

Quoted 6 lines
Quoted 3 lines
Quoted 1 line

Why isn't A2DP connecting? How can I debug this further?

Can you send the output of hcidump with F15 kernel and with linux-2.6.git kernel?

This is already fixed in
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git

Great, these fixes will be in linus-2.6 soon.

Gustavo

#4 lore raw
Quoted 51 lines · Gustavo F. Padovan
Quoted 49 lines · Jeremy Fitzhardinge
Quoted 48 lines · Gustavo F. Padovan

Hi Jeremy,

Quoted 44 lines · Jeremy Fitzhardinge

I have a Nokia BH-905i headset. With a stock F15 kernel, it all works well. With current linux-2.6.git, it fails to reconnect properly.

On connection, the headphones only beep once, whereas they normally beep twice; I think this is one beep per profile, and its only connecting HSP and failing A2DP. In the sound control panel, it either comes up with "profile: off" or with the HSP/HFP (Telephony) profile rather than A2DP, and it fails to switch if I try to change profiles via the sound control panel.

However, if I re-pair the device from scratch each time I use it, it connects properly and it all works fine.

pactl list shows:

Card #2
Name: bluez_card.00_0B_E4_A6_6C_0D
Driver: module-bluetooth-device.c
Owner Module: 23
Properties:
device.description = "Nokia BH-905i"
device.string = "00:0B:E4:A6:6C:0D"
device.api = "bluez"
device.class = "sound"
device.bus = "bluetooth"
device.form_factor = "headset"
bluez.path = "/org/bluez/843/hci0/dev_00_0B_E4_A6_6C_0D" bluez.class = "0x240404"
bluez.name = "Nokia BH-905i"
device.icon_name = "audio-headset-bluetooth" device.intended_roles = "phone"
Profiles:
a2dp: High Fidelity Playback (A2DP) (sinks: 1, sources: 0, priority. 10)
hsp: Telephony Duplex (HSP/HFP) (sinks: 1, sources: 1, priority. 20)
off: Off (sinks: 0, sources: 0, priority. 0)
Active Profile: hsp

If I try to switch profiles on the command line it says:

$ pactl set-card-profile 2 a2dp
Failure: Input/Output error

and /var/log/messages shows:
module-bluetooth-device.c: A2DP is not connected, refused to switch profile

Quoted 6 lines
Quoted 5 lines
Quoted 3 lines
Quoted 1 line

Why isn't A2DP connecting? How can I debug this further?

Can you send the output of hcidump with F15 kernel and with linux-2.6.git kernel?

This is already fixed in
git://git.kernel.org/pub/scm/linux/kernel/git/padovan/bluetooth-2.6.git

Great, these fixes will be in linus-2.6 soon.

There seems to have been a regression since then and the release 3.0 kernel (and the F15 "2.6.40" kernel), which have gone back to showing the original symptoms: I can use my headphones when I first pair them, but I can't reconnect from then.

Thanks,
J