HDMI CEC support
We are interesting in using CEC over HDMI with intel graphics.
Having looked at chip level documents we did not see CEC references.
Is this something that the intel hardware can support? If so is there driver support for CEC?
Barry
Quoted 7 lines · On Thu, 30 Jun 2011 16:07:30 +0100 Barry Scott <[email protected]> wrote:
We are interesting in using CEC over HDMI with intel graphics.
Having looked at chip level documents we did not see CEC references.
Is this something that the intel hardware can support? If so is there driver support for CEC?
There's no driver support for CEC right now; I haven't looked at the feature closely enough yet to know whether current hw can support it. If it mainly involves additional info frames then we can likely handle it with existing stuff...
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Quoted 8 lines · On Thursday 30 June 2011 16:35:05 Jesse Barnes wrote:
Quoted 5 lines · On Thu, 30 Jun 2011 16:07:30 +0100 Barry Scott <[email protected]> wrote:
We are interesting in using CEC over HDMI with intel graphics.
Having looked at chip level documents we did not see CEC references.
Quoted 9 lines
Quoted 2 lines
Is this something that the intel hardware can support? If so is there driver support for CEC?
There's no driver support for CEC right now; I haven't looked at the feature closely enough yet to know whether current hw can support it. If it mainly involves additional info frames then we can likely handle it with existing stuff...
The HW needs to support the 1 wire bidirectional bus using AV.Link prootocol on pin 13.
I bit of googling seems to confirm that Intel Integrated graphic on Windows can operate CEC. (I did not find chip level details).
We may be asked to get this going here. If we have access to the necesssary docs to work on this we'll supply patches for your consideration.
Barry
Quoted 8 lines · On Thu, 30 Jun 2011 18:19:20 +0100 Barry Scott <[email protected]> wrote:
The HW needs to support the 1 wire bidirectional bus using AV.Link prootocol on pin 13.
I bit of googling seems to confirm that Intel Integrated graphic on Windows can operate CEC. (I did not find chip level details).
We may be asked to get this going here. If we have access to the necesssary docs to work on this we'll supply patches for your consideration.
Great. Docs are available at http://www.intellinuxgraphics.org if you want to take a stab at this. It would be a nice feature to have.
Thanks,
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Quoted 9 lines · Jesse Barnes
On Thu, 30 Jun 2011 18:19:20 +0100
Quoted 6 lines · Barry Scott
The HW needs to support the 1 wire bidirectional bus using AV.Link prootocol on pin 13.
I bit of googling seems to confirm that Intel Integrated graphic on Windows can operate CEC. (I did not find chip level details).
Quoted 7 lines
Quoted 3 lines
We may be asked to get this going here. If we have access to the necesssary docs to work on this we'll supply patches for your consideration.
Great. Docs are available at http://www.intellinuxgraphics.org if you want to take a stab at this. It would be a nice feature to have.
Of the available docs, which one should I look in? I can't find any references to pin 13 or CEC in any part of volume 3, and when I look at the search results for HDMI, I can't find anything that even hints that pin 13 is connected to a GPIO line or an AV.Link engine in the hardware.
I can only find references to HDMI in part 3 of volume 3, but, again, nothing that indicates where I'd go hunting to find out how I get at the CEC pin.
Am I looking in the wrong place?
Signature · 4 lines
Simon Farnsworth Software Engineer ONELAN Limited http://www.onelan.com/
Quoted 22 lines · On Thu, 30 Jun 2011 18:37:13 +0100 Simon Farnsworth…
Quoted 9 lines · Jesse Barnes
On Thu, 30 Jun 2011 18:19:20 +0100
Quoted 6 lines · Barry Scott
The HW needs to support the 1 wire bidirectional bus using AV.Link prootocol on pin 13.
I bit of googling seems to confirm that Intel Integrated graphic on Windows can operate CEC. (I did not find chip level details).
Quoted 7 lines
Quoted 3 lines
We may be asked to get this going here. If we have access to the necesssary docs to work on this we'll supply patches for your consideration.
Great. Docs are available at http://www.intellinuxgraphics.org if you want to take a stab at this. It would be a nice feature to have.
Of the available docs, which one should I look in? I can't find any references to pin 13 or CEC in any part of volume 3, and when I look at the search results for HDMI, I can't find anything that even hints that pin 13 is connected to a GPIO line or an AV.Link engine in the hardware.
Quoted 4 lines
I can only find references to HDMI in part 3 of volume 3, but, again, nothing that indicates where I'd go hunting to find out how I get at the CEC pin.
Am I looking in the wrong place?
Hm I don't see any references either. Lemme ask around...
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center
Quoted 22 lines · On Thu, 30 Jun 2011 18:37:13 +0100 Simon Farnsworth…
Quoted 9 lines · Jesse Barnes
On Thu, 30 Jun 2011 18:19:20 +0100
Quoted 6 lines · Barry Scott
The HW needs to support the 1 wire bidirectional bus using AV.Link prootocol on pin 13.
I bit of googling seems to confirm that Intel Integrated graphic on Windows can operate CEC. (I did not find chip level details).
Quoted 7 lines
Quoted 3 lines
We may be asked to get this going here. If we have access to the necesssary docs to work on this we'll supply patches for your consideration.
Great. Docs are available at http://www.intellinuxgraphics.org if you want to take a stab at this. It would be a nice feature to have.
Of the available docs, which one should I look in? I can't find any references to pin 13 or CEC in any part of volume 3, and when I look at the search results for HDMI, I can't find anything that even hints that pin 13 is connected to a GPIO line or an AV.Link engine in the hardware.
Quoted 4 lines
I can only find references to HDMI in part 3 of volume 3, but, again, nothing that indicates where I'd go hunting to find out how I get at the CEC pin.
Am I looking in the wrong place?
Ok so it looks like we expose pin 13 to board vendors. They can attach a separate CEC chip to the HDMI port for use by an external driver. So you'll have to find a board with such a chip and the programming info for it; it's outside the scope of the GPU proper.
Signature · 1 line
Jesse Barnes, Intel Open Source Technology Center