Skip to contentSkip to conversation

apol and active modules

DISCUSSION Russell Coker 3 participants 7 messages Jul 24, 2011 – Jul 25, 2011 SELinux security module

lore
Share & tools
lore
#0 lore raw

Why can't apol (at least version 3.3.6.ds) parse the files in /etc/selinux/$SELINUXTYPE/modules/active/modules? Is this considered a bug or a wontfix thing?

Signature · 7 lines
My Main Blog         http://etbe.coker.com.au/
My Documents Blog    http://doc.coker.com.au/

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#1 lore raw
Quoted 3 lines · Russell Coker

Why can't apol (at least version 3.3.6.ds) parse the files in /etc/selinux/$SELINUXTYPE/modules/active/modules? Is this considered a bug or a wontfix thing?

Can you be more specific about your usage? There shouldn't be a problem looking at those, since they're just a copy of what you install via semodule -i/-b.

Signature · 8 lines
Chris PeBenito
Tresys Technology, LLC
www.tresys.com | oss.tresys.com

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#2 lore raw
Quoted 8 lines · Christopher J. PeBenito
Quoted 3 lines · Russell Coker

Why can't apol (at least version 3.3.6.ds) parse the files in /etc/selinux/$SELINUXTYPE/modules/active/modules? Is this considered a bug or a wontfix thing?

Can you be more specific about your usage? There shouldn't be a problem looking at those, since they're just a copy of what you install via semodule -i/-b.

# diff /usr/share/selinux/default/base.pp \ 
/etc/selinux/default/modules/active/base.pp 
Binary files /usr/share/selinux/default/base.pp and 
/etc/selinux/default/modules/active/base.pp differ

The files are not just a copy.

When /tmp/base.pp is a copy of /etc/selinux/default/modules/active/base.pp I get the following:

$ apol  /tmp/base.pp 
Initializing libqpol... done.
Initializing libapol... done.
Initializing libsefs... done.
Initializing libapol_tcl... done.
Initializing Tk... done.
(unknown source)::ERROR 'syntax error' at token 'BZh91AY' on line 1:
Signature · 7 lines
My Main Blog         http://etbe.coker.com.au/
My Documents Blog    http://doc.coker.com.au/

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#3 lore raw
Quoted 10 lines · Russell Coker
Quoted 8 lines · Christopher J. PeBenito
Quoted 3 lines · Russell Coker

Why can't apol (at least version 3.3.6.ds) parse the files in /etc/selinux/$SELINUXTYPE/modules/active/modules? Is this considered a bug or a wontfix thing?

Can you be more specific about your usage? There shouldn't be a problem looking at those, since they're just a copy of what you install via semodule -i/-b.

Quoted 6 lines
# diff /usr/share/selinux/default/base.pp \
/etc/selinux/default/modules/active/base.pp
Binary files /usr/share/selinux/default/base.pp and
/etc/selinux/default/modules/active/base.pp differ

The files are not just a copy.

It sounds like there might be some corruption. I did the same diff on my system and came up with no changes.

Signature · 8 lines
Chris PeBenito
Tresys Technology, LLC
www.tresys.com | oss.tresys.com

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#4 lore raw
Quoted 4 lines · Christopher J. PeBenito
Quoted 1 line

The files are not just a copy.

It sounds like there might be some corruption. I did the same diff on my system and came up with no changes.

On Debian/Squeeze and Debian/Unstable I can reliably rebuild the policy (via the selinux-policy-upgrade script that runs semodule to reinsert all modules from the original policy tree) and get the same result. Every time it results in different files in the active tree and apol not liking them.

It must be an issue of which versions of the libraries etc are being used. The systems work quite well like this, I just have to use the original .pp files for apol.

Signature · 8 lines
My Main Blog         http://etbe.coker.com.au/
My Documents Blog    http://doc.coker.com.au/


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#5 lore raw
In reply to Russell Coker
Quoted 20 lines · Russell Coker
Quoted 8 lines · Christopher J. PeBenito
Quoted 3 lines · Russell Coker

Why can't apol (at least version 3.3.6.ds) parse the files in /etc/selinux/$SELINUXTYPE/modules/active/modules? Is this considered a bug or a wontfix thing?

Can you be more specific about your usage? There shouldn't be a problem looking at those, since they're just a copy of what you install via semodule -i/-b.

# diff /usr/share/selinux/default/base.pp \ 
/etc/selinux/default/modules/active/base.pp 
Binary files /usr/share/selinux/default/base.pp and 
/etc/selinux/default/modules/active/base.pp differ

The files are not just a copy.

When /tmp/base.pp is a copy of /etc/selinux/default/modules/active/base.pp I get the following:

Quoted 7 lines
$ apol  /tmp/base.pp 
Initializing libqpol... done.
Initializing libapol... done.
Initializing libsefs... done.
Initializing libapol_tcl... done.
Initializing Tk... done.
(unknown source)::ERROR 'syntax error' at token 'BZh91AY' on line 1:

BZh is the bzip2 magic string. I'd guess your installed modules are compressed (the default) and thus can't be opened by apol unless it knows to decompress them first?

Signature · 8 lines
Stephen Smalley
National Security Agency


--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.
#6 lore raw
Quoted 29 lines · Stephen Smalley
Quoted 20 lines · Russell Coker
Quoted 8 lines · Christopher J. PeBenito
Quoted 3 lines · Russell Coker

Why can't apol (at least version 3.3.6.ds) parse the files in /etc/selinux/$SELINUXTYPE/modules/active/modules? Is this considered a bug or a wontfix thing?

Can you be more specific about your usage? There shouldn't be a problem looking at those, since they're just a copy of what you install via semodule -i/-b.

# diff /usr/share/selinux/default/base.pp \
/etc/selinux/default/modules/active/base.pp
Binary files /usr/share/selinux/default/base.pp and
/etc/selinux/default/modules/active/base.pp differ

The files are not just a copy.

When /tmp/base.pp is a copy of /etc/selinux/default/modules/active/base.pp I get the following:

Quoted 7 lines
$ apol  /tmp/base.pp
Initializing libqpol... done.
Initializing libapol... done.
Initializing libsefs... done.
Initializing libapol_tcl... done.
Initializing Tk... done.
(unknown source)::ERROR 'syntax error' at token 'BZh91AY' on line 1:
Quoted 3 lines

BZh is the bzip2 magic string. I'd guess your installed modules are compressed (the default) and thus can't be opened by apol unless it knows to decompress them first?

Ah, I forgot about that. SETools gained the bzip2 support in 3.3.7.

Signature · 8 lines
Chris PeBenito
Tresys Technology, LLC
www.tresys.com | oss.tresys.com

--
This message was distributed to subscribers of the selinux mailing list.
If you no longer wish to subscribe, send mail to [email protected] with
the words "unsubscribe selinux" without quotes as the message.