Skip to contentSkip to conversation

ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage

PATCH New Ben Dooks 3 participants 3 messages Aug 4, 2011 – Aug 5, 2011

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape
lore
Share & tools
lore

Ben Dooks

author
#0 lore raw

PATCH 1/1 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage

irq_to_gpio() is being called on a GPIO so change to using gpio_to_irq() instead.

Signed-off-by Ben Dooks <[email protected]>
---
 arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-mx5/board-cpuimx51.c +1 -1
index 7c893fa..68934ea 100644
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
Signature · 1 line
1.7.1
#1 lore raw

PATCH 1/1 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage

Quoted 4 lines · Ben Dooks

irq_to_gpio() is being called on a GPIO so change to using gpio_to_irq() instead.

Signed-off-by Ben Dooks <[email protected]>

cc'ing board maintainer.

Acked-by Amit Kucheria <[email protected]>
Quoted 20 lines
---
 arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-mx5/board-cpuimx51.c +1 -1
index 7c893fa..68934ea 100644
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
Signature · 1 line
1.7.1
Signature · 3 lines
----------------------------------------------------------------------
Amit Kucheria, Kernel Engineer || amit.kucheria at canonical.com
----------------------------------------------------------------------
maintainer Applied
#2 lore raw

PATCH 1/1 ARM: mx5: board-cpuimx51.c fixup irq_to_gpio() usage

In reply to Ben Dooks
Quoted 4 lines · Ben Dooks

irq_to_gpio() is being called on a GPIO so change to using gpio_to_irq() instead.

Signed-off-by Ben Dooks <[email protected]>

Applied, thanks

Sascha

Quoted 26 lines
---
 arch/arm/mach-mx5/board-cpuimx51.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
arch/arm/mach-mx5/board-cpuimx51.c +1 -1
index 7c893fa..68934ea 100644
@@ -81,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
 	}, {
 		.mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000),
-		.irq = irq_to_gpio(CPUIMX51_QUARTD_GPIO),
+		.irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO),
 		.irqflags = IRQF_TRIGGER_HIGH,
 		.uartclk = CPUIMX51_QUART_XTAL,
 		.regshift = CPUIMX51_QUART_REGSHIFT,
Signature · 7 lines
1.7.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Signature · 4 lines
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |