vxge: make function table const
Subsystems (2)
PATCH 1/1 vxge: make function table const
All tables of function pointers should be const. The pre-existing code has lots of needless indirection...
Inspired by similar change in PAX.
Compile tested only.
Signed-off-by Stephen Hemminger <[email protected]>
--- drivers/net/ethernet/neterion/vxge/vxge-config.c | 11 +++++------ drivers/net/ethernet/neterion/vxge/vxge-config.h | 4 ++-- drivers/net/ethernet/neterion/vxge/vxge-main.c | 10 +++++++--- drivers/net/ethernet/neterion/vxge/vxge-traffic.c | 12 ++++++------ 4 files changed, 20 insertions(+), 17 deletions(-)
drivers/net/ethernet/neterion/vxge/vxge-config.c +5 -6
@@ -1342,9 +1342,7 @@ vxge_hw_device_initialize( hldev->bar0 = attr->bar0; hldev->pdev = attr->pdev; - hldev->uld_callbacks.link_up = attr->uld_callbacks.link_up; - hldev->uld_callbacks.link_down = attr->uld_callbacks.link_down; - hldev->uld_callbacks.crit_err = attr->uld_callbacks.crit_err; + hldev->uld_callbacks = attr->uld_callbacks;__vxge_hw_device_pci_e_init (hldev);
@@ -2633,7 +2631,7 @@ __vxge_hw_mempool_create(struct __vxge_hu32 items_priv_size, u32 items_initial, u32 items_max, - struct vxge_hw_mempool_cbs *mp_callback, + const struct vxge_hw_mempool_cbs *mp_callback, void *userdata) { enum vxge_hw_status status = VXGE_HW_OK;
@@ -2817,7 +2815,9 @@ __vxge_hw_ring_create(struct __vxge_hw_vstruct vxge_hw_ring_config *config;struct __vxge_hw_device *hldev;u32 vp_id; -struct vxge_hw_mempool_cbs ring_mp_callback; +static const struct vxge_hw_mempool_cbs ring_mp_callback = { + .item_func_alloc = __vxge_hw_ring_mempool_item_alloc, + };if ((vp ==NULL ) || (attr ==NULL )) { status =VXGE_HW_FAIL ;
@@ -2872,7 +2872,6 @@ __vxge_hw_ring_create(struct __vxge_hw_v/* calculate actual RxD block private size */ ring->rxdblock_priv_size = ring->rxd_priv_size * ring->rxds_per_block; - ring_mp_callback.item_func_alloc = __vxge_hw_ring_mempool_item_alloc; ring->mempool = __vxge_hw_mempool_create(hldev, VXGE_HW_BLOCK_SIZE, VXGE_HW_BLOCK_SIZE,
drivers/net/ethernet/neterion/vxge/vxge-config.h +2 -2
@@ -740,7 +740,7 @@ struct __vxge_hw_device {struct vxge_hw_device_config config;enum vxge_hw_device_link_state link_state; -struct vxge_hw_uld_cbs uld_callbacks; +const struct vxge_hw_uld_cbs *uld_callbacks;u32 host_type;u32 func_id;
@@ -840,7 +840,7 @@ struct vxge_hw_device_hw_info {struct vxge_hw_device_attr {void __iomem *bar0;struct pci_dev *pdev; -struct vxge_hw_uld_cbs uld_callbacks; +const struct vxge_hw_uld_cbs *uld_callbacks; };#define VXGE_HW_DEVICE_LINK_STATE_SET (hldev, ls) (hldev->link_state = ls)
drivers/net/ethernet/neterion/vxge/vxge-main.c +7 -3
@@ -4284,6 +4284,12 @@ static int __devinit is_sriov_initializereturn 0 ; } +static const struct vxge_hw_uld_cbs vxge_callbacks = { + .link_up = vxge_callback_link_up, + .link_down = vxge_callback_link_down, + .crit_err = vxge_callback_crit_err, +}; +/** * vxge_probe * @pdev : structure containing the PCI related information of the device.
@@ -4494,9 +4500,7 @@ vxge_probe(struct pci_dev *pdev, const s }/* Setting driver callbacks */ - attr.uld_callbacks.link_up = vxge_callback_link_up; - attr.uld_callbacks.link_down = vxge_callback_link_down; - attr.uld_callbacks.crit_err = vxge_callback_crit_err; + attr.uld_callbacks = &vxge_callbacks; status =vxge_hw_device_initialize (&hldev, &attr, device_config);if (status !=VXGE_HW_OK ) {
drivers/net/ethernet/neterion/vxge/vxge-traffic.c +6 -6
@@ -532,8 +532,8 @@ __vxge_hw_device_handle_error(struct __v }/* notify driver */ -if (hldev->uld_callbacks.crit_err) - hldev->uld_callbacks.crit_err ( +if (hldev->uld_callbacks->crit_err) + hldev->uld_callbacks->crit_err ( (struct __vxge_hw_device *)hldev, type, vp_id); out:
@@ -560,8 +560,8 @@ __vxge_hw_device_handle_link_down_ind(st hldev->link_state =VXGE_HW_LINK_DOWN ;/* notify driver */ -if (hldev->uld_callbacks.link_down) - hldev->uld_callbacks.link_down (hldev); +if (hldev->uld_callbacks->link_down) + hldev->uld_callbacks->link_down (hldev); exit:return VXGE_HW_OK ; }
@@ -585,8 +585,8 @@ __vxge_hw_device_handle_link_up_ind(stru hldev->link_state =VXGE_HW_LINK_UP ;/* notify driver */ -if (hldev->uld_callbacks.link_up) - hldev->uld_callbacks.link_up (hldev); +if (hldev->uld_callbacks->link_up) + hldev->uld_callbacks->link_up (hldev); exit:return VXGE_HW_OK ; }
From: Stephen Hemminger <[email protected]>
Date: Fri, 16 Sep 2011 14:10:01 -0700
Quoted 8 lines
All tables of function pointers should be const. The pre-existing code has lots of needless indirection...
Inspired by similar change in PAX.
Compile tested only.Signed-off-by Stephen Hemminger <[email protected]>
Applied.