punt unused clean/distclean targets
Subsystems (6)
PATCH 1/1 punt unused clean/distclean targets
The top level Makefile does not do any recursion into subdirs when cleaning, so these clean/distclean targets in random arch/board dirs never get used. Punt them all.
MAKEALL didn't report any errors related to this that I could see.
Signed-off-by Mike Frysinger <[email protected]>
--- arch/arm/cpu/arm926ejs/spear/Makefile | 6 ------ arch/sh/cpu/sh2/Makefile | 6 ------ arch/sh/cpu/sh3/Makefile | 6 ------ arch/sh/cpu/sh4/Makefile | 6 ------ board/BuS/eb_cpux9k2/Makefile | 6 ------ board/LaCie/edminiv2/Makefile | 6 ------ board/LaCie/netspace_v2/Makefile | 6 ------ board/Marvell/aspenite/Makefile | 6 ------ board/Marvell/dkb/Makefile | 6 ------ board/Marvell/gplugd/Makefile | 6 ------ board/Marvell/guruplug/Makefile | 6 ------ board/Marvell/mv88f6281gtw_ge/Makefile | 6 ------ board/Marvell/openrd/Makefile | 6 ------ board/Marvell/rd6281a/Makefile | 6 ------ board/Marvell/sheevaplug/Makefile | 6 ------ board/Seagate/dockstar/Makefile | 6 ------ board/a4m072/Makefile | 6 ------ board/actux1/Makefile | 6 ------ board/actux2/Makefile | 6 ------ board/actux3/Makefile | 6 ------ board/actux4/Makefile | 6 ------ board/adder/Makefile | 6 ------ board/afeb9260/Makefile | 6 ------ board/alaska/Makefile | 6 ------ board/altera/nios2-generic/Makefile | 6 ------ board/amcc/acadia/Makefile | 6 ------ board/amcc/bamboo/Makefile | 6 ------ board/amcc/bluestone/Makefile | 6 ------ board/amcc/bubinga/Makefile | 6 ------ board/amcc/canyonlands/Makefile | 6 ------ board/amcc/ebony/Makefile | 6 ------ board/amcc/katmai/Makefile | 6 ------ board/amcc/kilauea/Makefile | 6 ------ board/amcc/luan/Makefile | 6 ------ board/amcc/makalu/Makefile | 6 ------ board/amcc/ocotea/Makefile | 6 ------ board/amcc/redwood/Makefile | 6 ------ board/amcc/sequoia/Makefile | 6 ------ board/amcc/taihu/Makefile | 6 ------ board/amcc/taishan/Makefile | 6 ------ board/amcc/walnut/Makefile | 6 ------ board/amcc/yosemite/Makefile | 6 ------ board/amcc/yucca/Makefile | 6 ------ board/amirix/ap1000/Makefile | 6 ------ board/apollon/Makefile | 6 ------ board/armltd/integrator/Makefile | 6 ------ board/armltd/versatile/Makefile | 6 ------ board/armltd/vexpress/Makefile | 6 ------ board/atmel/at91rm9200ek/Makefile | 6 ------ board/atmel/at91sam9260ek/Makefile | 6 ------ board/atmel/at91sam9261ek/Makefile | 6 ------ board/atmel/at91sam9263ek/Makefile | 6 ------ board/atmel/at91sam9m10g45ek/Makefile | 6 ------ board/atmel/at91sam9rlek/Makefile | 6 ------ board/balloon3/Makefile | 6 ------ board/bc3450/Makefile | 6 ------ board/bct-brettl2/Makefile | 6 ------ board/bf506f-ezkit/Makefile | 6 ------ board/bf518f-ezbrd/Makefile | 6 ------ board/bf525-ucr2/Makefile | 6 ------ board/bf526-ezbrd/Makefile | 6 ------ board/bf527-ad7160-eval/Makefile | 6 ------ board/bf527-ezkit/Makefile | 6 ------ board/bf527-sdp/Makefile | 6 ------ board/bf533-ezkit/Makefile | 6 ------ board/bf533-stamp/Makefile | 6 ------ board/bf537-minotaur/Makefile | 6 ------ board/bf537-pnav/Makefile | 6 ------ board/bf537-srv1/Makefile | 6 ------ board/bf537-stamp/Makefile | 6 ------ board/bf538f-ezkit/Makefile | 6 ------ board/bf548-ezkit/Makefile | 6 ------ board/bf561-acvilon/Makefile | 6 ------ board/bf561-ezkit/Makefile | 6 ------ board/blackstamp/Makefile | 6 ------ board/blackvme/Makefile | 6 ------ board/bluewater/snapper9260/Makefile | 6 ------ board/calao/sbc35_a9g20/Makefile | 6 ------ board/calao/tny_a9260/Makefile | 6 ------ board/canmb/Makefile | 6 ------ board/cerf250/Makefile | 6 ------ board/cm-bf527/Makefile | 6 ------ board/cm-bf533/Makefile | 6 ------ board/cm-bf537e/Makefile | 6 ------ board/cm-bf537u/Makefile | 6 ------ board/cm-bf548/Makefile | 6 ------ board/cm-bf561/Makefile | 6 ------ board/cm4008/Makefile | 6 ------ board/cm41xx/Makefile | 6 ------ board/cm5200/Makefile | 6 ------ board/cm_t35/Makefile | 6 ------ board/cmi/Makefile | 6 ------ board/cogent/Makefile | 6 ------ board/colibri_pxa270/Makefile | 6 ------ board/comelit/dig297/Makefile | 6 ------ board/cradle/Makefile | 6 ------ board/cray/L1/Makefile | 7 ------- board/csb226/Makefile | 6 ------ board/csb272/Makefile | 6 ------ board/csb472/Makefile | 6 ------ board/dave/PPChameleonEVB/Makefile | 6 ------ board/davedenx/aria/Makefile | 6 ------ board/davedenx/qong/Makefile | 6 ------ board/davinci/common/Makefile | 6 ------ board/davinci/da8xxevm/Makefile | 6 ------ board/davinci/dm355evm/Makefile | 6 ------ board/davinci/dm355leopard/Makefile | 6 ------ board/davinci/dm365evm/Makefile | 6 ------ board/davinci/dm6467evm/Makefile | 6 ------ board/davinci/dvevm/Makefile | 6 ------ board/davinci/ea20/Makefile | 6 ------ board/davinci/schmoogie/Makefile | 6 ------ board/davinci/sffsdr/Makefile | 6 ------ board/davinci/sonata/Makefile | 6 ------ board/dnp5370/Makefile | 6 ------ board/dvlhost/Makefile | 6 ------ board/eNET/Makefile | 6 ------ board/efikamx/Makefile | 6 ------ board/eltec/bab7xx/Makefile | 6 ------ board/eltec/elppc/Makefile | 6 ------ board/emk/top5200/Makefile | 6 ------ board/emk/top9000/Makefile | 6 ------ board/ep8248/Makefile | 6 ------ board/ep8260/Makefile | 6 ------ board/ep82xxm/Makefile | 6 ------ board/ep88x/Makefile | 6 ------ board/esd/adciop/Makefile | 6 ------ board/esd/apc405/Makefile | 6 ------ board/esd/ar405/Makefile | 6 ------ board/esd/ash405/Makefile | 6 ------ board/esd/canbt/Makefile | 6 ------ board/esd/cms700/Makefile | 6 ------ board/esd/cpci2dp/Makefile | 6 ------ board/esd/cpci405/Makefile | 6 ------ board/esd/cpci5200/Makefile | 6 ------ board/esd/cpciiser4/Makefile | 6 ------ board/esd/dasa_sim/Makefile | 6 ------ board/esd/dp405/Makefile | 6 ------ board/esd/du405/Makefile | 6 ------ board/esd/du440/Makefile | 6 ------ board/esd/hh405/Makefile | 6 ------ board/esd/hub405/Makefile | 6 ------ board/esd/mecp5123/Makefile | 6 ------ board/esd/mecp5200/Makefile | 6 ------ board/esd/meesc/Makefile | 6 ------ board/esd/ocrtc/Makefile | 6 ------ board/esd/otc570/Makefile | 6 ------ board/esd/pci405/Makefile | 6 ------ board/esd/pf5200/Makefile | 6 ------ board/esd/plu405/Makefile | 6 ------ board/esd/pmc405/Makefile | 6 ------ board/esd/pmc405de/Makefile | 6 ------ board/esd/pmc440/Makefile | 6 ------ board/esd/vme8349/Makefile | 6 ------ board/esd/voh405/Makefile | 6 ------ board/esd/vom405/Makefile | 6 ------ board/esd/wuh405/Makefile | 6 ------ board/espt/Makefile | 6 ------ board/eukrea/cpu9260/Makefile | 6 ------ board/eukrea/cpuat91/Makefile | 6 ------ board/faraday/a320evb/Makefile | 6 ------ board/freescale/common/Makefile | 6 ------ board/freescale/corenet_ds/Makefile | 6 ------ board/freescale/mpc5121ads/Makefile | 6 ------ board/freescale/mpc7448hpc2/Makefile | 7 ------- board/freescale/mpc8260ads/Makefile | 6 ------ board/freescale/mpc8266ads/Makefile | 6 ------ board/freescale/mpc8308rdb/Makefile | 6 ------ board/freescale/mpc8313erdb/Makefile | 6 ------ board/freescale/mpc8315erdb/Makefile | 6 ------ board/freescale/mpc8323erdb/Makefile | 6 ------ board/freescale/mpc832xemds/Makefile | 6 ------ board/freescale/mpc8349emds/Makefile | 6 ------ board/freescale/mpc8349itx/Makefile | 6 ------ board/freescale/mpc8360emds/Makefile | 6 ------ board/freescale/mpc8360erdk/Makefile | 6 ------ board/freescale/mpc837xemds/Makefile | 6 ------ board/freescale/mpc837xerdb/Makefile | 6 ------ board/freescale/mpc8536ds/Makefile | 6 ------ board/freescale/mpc8540ads/Makefile | 6 ------ board/freescale/mpc8541cds/Makefile | 6 ------ board/freescale/mpc8544ds/Makefile | 6 ------ board/freescale/mpc8548cds/Makefile | 6 ------ board/freescale/mpc8555cds/Makefile | 6 ------ board/freescale/mpc8560ads/Makefile | 6 ------ board/freescale/mpc8568mds/Makefile | 6 ------ board/freescale/mpc8569mds/Makefile | 6 ------ board/freescale/mpc8572ds/Makefile | 6 ------ board/freescale/mpc8610hpcd/Makefile | 7 ------- board/freescale/mpc8641hpcn/Makefile | 7 ------- board/freescale/mx31ads/Makefile | 6 ------ board/freescale/mx31pdk/Makefile | 6 ------ board/freescale/mx35pdk/Makefile | 6 ------ board/freescale/mx51evk/Makefile | 6 ------ board/freescale/mx53ard/Makefile | 6 ------ board/freescale/mx53evk/Makefile | 6 ------ board/freescale/mx53loco/Makefile | 6 ------ board/freescale/mx53smd/Makefile | 6 ------ board/freescale/p1022ds/Makefile | 6 ------ board/freescale/p1023rds/Makefile | 6 ------ board/freescale/p1_p2_rdb/Makefile | 6 ------ board/freescale/p2020ds/Makefile | 6 ------ board/freescale/p2041rdb/Makefile | 6 ------ board/funkwerk/vovpn-gw/Makefile | 6 ------ board/g2000/Makefile | 6 ------ board/gaisler/gr_cpci_ax2000/Makefile | 6 ------ board/gaisler/gr_ep2s60/Makefile | 6 ------ board/gaisler/gr_xc3s_1500/Makefile | 6 ------ board/gaisler/grsim/Makefile | 6 ------ board/gaisler/grsim_leon2/Makefile | 6 ------ board/galaxy5200/Makefile | 6 ------ board/gdsys/405ep/Makefile | 6 ------ board/gdsys/common/Makefile | 6 ------ board/gdsys/dlvision/Makefile | 6 ------ board/gdsys/gdppc440etx/Makefile | 6 ------ board/gdsys/intip/Makefile | 6 ------ board/gdsys/neo/Makefile | 6 ------ board/gw8260/Makefile | 6 ------ board/ibf-dsp561/Makefile | 6 ------ board/icecube/Makefile | 6 ------ board/imx31_phycore/Makefile | 6 ------ board/inka4x0/Makefile | 6 ------ board/innokom/Makefile | 6 ------ board/intercontrol/digsy_mtc/Makefile | 6 ------ board/ip04/Makefile | 6 ------ board/ipek01/Makefile | 6 ------ board/iphase4539/Makefile | 6 ------ board/isee/igep0020/Makefile | 6 ------ board/isee/igep0030/Makefile | 6 ------ board/ispan/Makefile | 6 ------ board/ixdp425/Makefile | 6 ------ board/jornada/Makefile | 6 ------ board/jse/Makefile | 6 ------ board/jupiter/Makefile | 6 ------ board/karo/tx25/Makefile | 6 ------ board/keymile/km82xx/Makefile | 6 ------ board/keymile/km83xx/Makefile | 6 ------ board/keymile/km_arm/Makefile | 6 ------ board/korat/Makefile | 6 ------ board/logicpd/am3517evm/Makefile | 6 ------ board/logicpd/imx27lite/Makefile | 6 ------ board/logicpd/imx31_litekit/Makefile | 6 ------ board/logicpd/zoom1/Makefile | 6 ------ board/logicpd/zoom2/Makefile | 6 ------ board/lubbock/Makefile | 6 ------ board/lwmon5/Makefile | 6 ------ board/manroland/hmi1001/Makefile | 6 ------ board/manroland/mucmc52/Makefile | 6 ------ board/manroland/uc101/Makefile | 6 ------ board/matrix_vision/common/Makefile | 6 ------ board/matrix_vision/mergerbox/Makefile | 6 ------ board/matrix_vision/mvbc_p/Makefile | 6 ------ board/matrix_vision/mvblm7/Makefile | 6 ------ board/matrix_vision/mvsmr/Makefile | 6 ------ board/mcc200/Makefile | 6 ------ board/mercury/mpq101/Makefile | 6 ------ board/micronas/vct/Makefile | 6 ------ board/ml2/Makefile | 6 ------ board/mosaixtech/icon/Makefile | 6 ------ board/motionpro/Makefile | 6 ------ board/mpc8308_p1m/Makefile | 6 ------ board/mpl/mip405/Makefile | 6 ------ board/mpl/pati/Makefile | 6 ------ board/mpl/pip405/Makefile | 6 ------ board/mpl/vcma9/Makefile | 6 ------ board/mpr2/Makefile | 6 ------ board/ms7720se/Makefile | 6 ------ board/ms7722se/Makefile | 6 ------ board/ms7750se/Makefile | 6 ------ board/muas3001/Makefile | 6 ------ board/munices/Makefile | 6 ------ board/mx1ads/Makefile | 6 ------ board/ns9750dev/Makefile | 6 ------ board/nvidia/harmony/Makefile | 6 ------ board/nvidia/seaboard/Makefile | 6 ------ board/o2dnt/Makefile | 6 ------ board/overo/Makefile | 6 ------ board/palmld/Makefile | 6 ------ board/palmtc/Makefile | 6 ------ board/pandora/Makefile | 6 ------ board/pcs440ep/Makefile | 6 ------ board/pdm360ng/Makefile | 6 ------ board/phytec/pcm030/Makefile | 6 ------ board/pleb2/Makefile | 6 ------ board/pm520/Makefile | 6 ------ board/ppmc7xx/Makefile | 6 ------ board/ppmc8260/Makefile | 6 ------ board/prodrive/alpr/Makefile | 6 ------ board/prodrive/p3mx/Makefile | 6 ------ board/prodrive/p3p440/Makefile | 6 ------ board/prodrive/pdnb3/Makefile | 6 ------ board/psyent/pci5441/Makefile | 6 ------ board/psyent/pk1c20/Makefile | 6 ------ board/pxa255_idp/Makefile | 6 ------ board/quad100hd/Makefile | 6 ------ board/rattler/Makefile | 6 ------ board/renesas/MigoR/Makefile | 6 ------ board/renesas/ap325rxa/Makefile | 6 ------ board/renesas/r2dplus/Makefile | 6 ------ board/renesas/r7780mp/Makefile | 6 ------ board/renesas/rsk7203/Makefile | 6 ------ board/renesas/rsk7264/Makefile | 6 ------ board/renesas/sh7757lcr/Makefile | 6 ------ board/renesas/sh7763rdp/Makefile | 6 ------ board/renesas/sh7785lcr/Makefile | 6 ------ board/ronetix/pm9261/Makefile | 6 ------ board/ronetix/pm9263/Makefile | 6 ------ board/ronetix/pm9g45/Makefile | 6 ------ board/rpxsuper/Makefile | 6 ------ board/rsdproto/Makefile | 6 ------ board/sacsng/Makefile | 6 ------ board/samsung/goni/Makefile | 6 ------ board/samsung/smdk2410/Makefile | 6 ------ board/samsung/smdk6400/Makefile | 6 ------ board/samsung/smdkc100/Makefile | 6 ------ board/samsung/universal_c210/Makefile | 6 ------ board/sandburst/karef/Makefile | 6 ------ board/sandburst/metrobox/Makefile | 6 ------ board/sbc405/Makefile | 6 ------ board/sbc8260/Makefile | 6 ------ board/sbc8349/Makefile | 6 ------ board/sbc8548/Makefile | 6 ------ board/sbc8560/Makefile | 6 ------ board/sbc8641d/Makefile | 7 ------- board/sc3/Makefile | 6 ------ board/scb9328/Makefile | 6 ------ board/sheldon/simpc8313/Makefile | 6 ------ board/shmin/Makefile | 6 ------ board/siemens/SCM/Makefile | 6 ------ board/socrates/Makefile | 6 ------ board/sorcery/Makefile | 6 ------ board/spear/common/Makefile | 6 ------ board/spear/spear300/Makefile | 6 ------ board/spear/spear310/Makefile | 6 ------ board/spear/spear320/Makefile | 6 ------ board/spear/spear600/Makefile | 6 ------ board/st-ericsson/u8500/Makefile | 6 ------ board/st/nhk8815/Makefile | 6 ------ board/stx/stxgp3/Makefile | 6 ------ board/stx/stxssa/Makefile | 6 ------ board/sx1/Makefile | 6 ------ board/syteco/jadecpu/Makefile | 6 ------ board/syteco/zmx25/Makefile | 6 ------ board/t3corp/Makefile | 6 ------ board/tcm-bf518/Makefile | 6 ------ board/tcm-bf537/Makefile | 6 ------ board/ti/am3517crane/Makefile | 6 ------ board/ti/beagle/Makefile | 6 ------ board/ti/evm/Makefile | 6 ------ board/ti/omap1510inn/Makefile | 6 ------ board/ti/omap1610inn/Makefile | 6 ------ board/ti/omap2420h4/Makefile | 6 ------ board/ti/omap5912osk/Makefile | 6 ------ board/ti/omap730p2/Makefile | 6 ------ board/ti/panda/Makefile | 6 ------ board/ti/sdp3430/Makefile | 6 ------ board/ti/sdp4430/Makefile | 6 ------ board/ti/tnetv107xevm/Makefile | 6 ------ board/timll/devkit8000/Makefile | 6 ------ board/total5200/Makefile | 6 ------ board/tqc/tqm5200/Makefile | 6 ------ board/tqc/tqm834x/Makefile | 6 ------ board/tqc/tqm85xx/Makefile | 6 ------ board/trizepsiv/Makefile | 6 ------ board/ttcontrol/vision2/Makefile | 6 ------ board/v38b/Makefile | 6 ------ board/ve8313/Makefile | 6 ------ board/vpac270/Makefile | 6 ------ board/w7o/Makefile | 6 ------ board/xaeniax/Makefile | 6 ------ board/xes/common/Makefile | 6 ------ board/xes/xpedite1000/Makefile | 6 ------ board/xes/xpedite517x/Makefile | 6 ------ board/xes/xpedite520x/Makefile | 6 ------ board/xes/xpedite537x/Makefile | 6 ------ board/xes/xpedite550x/Makefile | 6 ------ board/xilinx/microblaze-generic/Makefile | 6 ------ board/xilinx/ppc405-generic/Makefile | 6 ------ board/xilinx/ppc440-generic/Makefile | 6 ------ board/xm250/Makefile | 6 ------ board/zeus/Makefile | 6 ------ board/zipitz2/Makefile | 6 ------ board/zpc1900/Makefile | 6 ------ 383 files changed, 0 insertions(+), 2303 deletions(-)
arch/arm/cpu/arm926ejs/spear/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
arch/sh/cpu/sh2/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
arch/sh/cpu/sh3/Makefile +0 -6
@@ -41,12 +41,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
arch/sh/cpu/sh4/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/BuS/eb_cpux9k2/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/LaCie/edminiv2/Makefile +0 -6
@@ -37,12 +37,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/LaCie/netspace_v2/Makefile +0 -6
@@ -33,12 +33,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/aspenite/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/dkb/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/gplugd/Makefile +0 -6
@@ -41,12 +41,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/guruplug/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/mv88f6281gtw_ge/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/openrd/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/rd6281a/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/sheevaplug/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Seagate/dockstar/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/a4m072/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux1/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux2/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux3/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux4/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/adder/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/afeb9260/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/alaska/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/altera/nios2-generic/Makefile +0 -6
@@ -44,12 +44,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/acadia/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/bamboo/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/bluestone/Makefile +0 -6
@@ -38,12 +38,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/bubinga/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/canyonlands/Makefile +0 -6
@@ -39,12 +39,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/ebony/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/katmai/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/kilauea/Makefile +0 -6
@@ -35,12 +35,6 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/luan/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/makalu/Makefile +0 -6
@@ -34,12 +34,6 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/ocotea/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/redwood/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend *~ - ######################################################################### include $(SRCTREE)/rules.mk
board/amcc/sequoia/Makefile +0 -6
@@ -39,12 +39,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/taihu/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/taishan/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/walnut/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/yosemite/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/yucca/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amirix/ap1000/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/apollon/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/armltd/integrator/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(COBJS) $(SOBJS) $(call cmd_link_o_target, $(COBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(COBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/armltd/versatile/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/armltd/vexpress/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91rm9200ek/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9260ek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9261ek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9263ek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9m10g45ek/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9rlek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/balloon3/Makefile +0 -6
@@ -31,12 +31,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bc3450/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bct-brettl2/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - # defines $(obj).depend target include $(SRCTREE)/rules.mk
board/bf506f-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf518f-ezbrd/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf525-ucr2/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf526-ezbrd/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf527-ad7160-eval/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf527-ezkit/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf527-sdp/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf533-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf533-stamp/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-minotaur/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-pnav/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-srv1/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-stamp/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf538f-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf548-ezkit/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf561-acvilon/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf561-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/blackstamp/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/blackvme/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bluewater/snapper9260/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/calao/sbc35_a9g20/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/calao/tny_a9260/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/canmb/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cerf250/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf527/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf533/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf537e/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf537u/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf548/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf561/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm4008/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm41xx/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm5200/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm_t35/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cmi/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cogent/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/colibri_pxa270/Makefile +0 -6
@@ -31,12 +31,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/comelit/dig297/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cradle/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cray/L1/Makefile +0 -7
@@ -38,13 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(obj)bootscript.o $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) $(obj)bootscript.c \ - $(obj)bootscript.image $(obj)bootscript.o - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - $(obj)$(BOARD).o : $(src)$(BOARD).c $(obj)bootscript.o $(obj)bootscript.c: $(obj)bootscript.image
board/csb226/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/csb272/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/csb472/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/dave/PPChameleonEVB/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/davedenx/aria/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/davedenx/qong/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/davinci/common/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/da8xxevm/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak *~ .depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm355evm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm355leopard/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm365evm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm6467evm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dvevm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/ea20/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak *~ .depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/schmoogie/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/sffsdr/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/sonata/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/dnp5370/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/dvlhost/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eNET/Makefile +0 -6
@@ -42,12 +42,6 @@ OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/efikamx/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/eltec/bab7xx/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eltec/elppc/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/emk/top5200/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/emk/top9000/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep8248/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep8260/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep82xxm/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep88x/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/adciop/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/apc405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/ar405/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/ash405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/canbt/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cms700/Makefile +0 -6
@@ -45,12 +45,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpci2dp/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpci405/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpci5200/Makefile +0 -6
@@ -43,12 +43,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpciiser4/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/dasa_sim/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/dp405/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/du405/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/du440/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/hh405/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/hub405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/mecp5123/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/mecp5200/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/meesc/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/ocrtc/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/otc570/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pci405/Makefile +0 -6
@@ -39,12 +39,6 @@ $(LIB): $(OBJS) $(SOBJS) # $(call cmd_link_o_target, $(OBJS)) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pf5200/Makefile +0 -6
@@ -44,12 +44,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/plu405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pmc405/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pmc405de/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pmc440/Makefile +0 -6
@@ -42,12 +42,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/vme8349/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/voh405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/vom405/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/wuh405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/espt/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eukrea/cpu9260/Makefile +0 -6
@@ -43,12 +43,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eukrea/cpuat91/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/faraday/a320evb/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/common/Makefile +0 -6
@@ -59,12 +59,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/corenet_ds/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc5121ads/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc7448hpc2/Makefile +0 -7
@@ -35,13 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8260ads/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8266ads/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8308rdb/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8313erdb/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8315erdb/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8323erdb/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc832xemds/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8349emds/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8349itx/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/freescale/mpc8360emds/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8360erdk/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc837xemds/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc837xerdb/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8536ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8540ads/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8541cds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8544ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8548cds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8555cds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8560ads/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8568mds/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8569mds/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8572ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8610hpcd/Makefile +0 -7
@@ -36,13 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8641hpcn/Makefile +0 -7
@@ -36,13 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx31ads/Makefile +0 -6
@@ -31,12 +31,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx31pdk/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx35pdk/Makefile +0 -6
@@ -33,12 +33,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx51evk/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53ard/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53evk/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53loco/Makefile +0 -6
@@ -31,12 +31,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53smd/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1022ds/Makefile +0 -6
@@ -25,12 +25,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1023rds/Makefile +0 -6
@@ -22,12 +22,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1_p2_rdb/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p2020ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p2041rdb/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/funkwerk/vovpn-gw/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/g2000/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/gr_cpci_ax2000/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/gr_ep2s60/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/gr_xc3s_1500/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/grsim/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/grsim_leon2/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/galaxy5200/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/405ep/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/common/Makefile +0 -6
@@ -43,12 +43,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/dlvision/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/gdppc440etx/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/intip/Makefile +0 -6
@@ -39,12 +39,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/neo/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gw8260/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ibf-dsp561/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/icecube/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/imx31_phycore/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/inka4x0/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/innokom/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/intercontrol/digsy_mtc/Makefile +0 -6
@@ -17,12 +17,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/ip04/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ipek01/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/iphase4539/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/isee/igep0020/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/isee/igep0030/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ispan/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ixdp425/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/jornada/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/jse/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/jupiter/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/karo/tx25/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/keymile/km82xx/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/keymile/km83xx/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/keymile/km_arm/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/korat/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/am3517evm/Makefile +0 -6
@@ -32,12 +32,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/imx27lite/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/logicpd/imx31_litekit/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/zoom1/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/zoom2/Makefile +0 -6
@@ -37,12 +37,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/lubbock/Makefile +0 -6
@@ -34,12 +34,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/lwmon5/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/manroland/hmi1001/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/manroland/mucmc52/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/manroland/uc101/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/matrix_vision/common/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend
Lines of this file are not shown. View the raw message.
board/xilinx/microblaze-generic/Makefile +0 -6
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.7.6
Part of the diff is not shown here. View the raw message.
PATCH 1/1 punt unused clean/distclean targets
Dear Mike Frysinger,
Quoted 3 lines · In message <[email protected]> you wrote:
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.
I think this is the wrong approach. Would it not be better to get rid of the 60 lines of clean/clobber target in the top level Makefile, including it's brute force methods of "find ... | xargs rm -f" and actually remove the files from the Makefiles in the respective directories instead?
This would for example allow that a board maintainer can fix the clean / clobber rules for his code without having to edit the top level Makefile.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "What is wanted is not the will to believe, but the will to find out, which is the exact opposite." - Bertrand Russell, _Sceptical_Essays_, 1928
PATCH 1/1 punt unused clean/distclean targets
Quoted 11 lines · On Sunday, September 18, 2011 03:26:38 Wolfgang Denk wrote:
Quoted 3 lines · Mike Frysinger
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.I think this is the wrong approach. Would it not be better to get rid of the 60 lines of clean/clobber target in the top level
Makefile, including it's brute force methods of "find ... | xargs rm -f" and actually remove the files from the Makefiles in the respective directories instead?
Quoted 3 lines
This would for example allow that a board maintainer can fix the clean / clobber rules for his code without having to edit the top level
Makefile.
yes & no. i think we should have 1 clean/distclean target, but also have a way for board maintainers to inject their own custom clean files. preferably via a .mk file in their board subdir. this is moving in the direction of non- recursive make like the kernel does -- the top level would source all the subfiles to figure out the master clean list.
however, the current build system has one advantage which i think we should retain in the short term: make distclean always cleans out the targets regardless of the current config. for example, if you do make bf537-stamp followed by make harmony followed by make distclean, Blackfin-specific objects will still get cleaned out.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110918/5e992134/attachment.pgp
PATCH 1/1 punt unused clean/distclean targets
Quoted 22 lines · Mike Frysinger
Quoted 11 lines · On Sunday, September 18, 2011 03:26:38 Wolfgang Denk wrote:
Quoted 3 lines · Mike Frysinger
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.I think this is the wrong approach. Would it not be better to get rid of the 60 lines of clean/clobber target in the top level
Makefile, including it's brute force methods of "find ... | xargs rm -f" and actually remove the files from the Makefiles in the respective directories instead?Quoted 3 lines
This would for example allow that a board maintainer can fix the clean / clobber rules for his code without having to edit the top level
Makefile.yes & no. i think we should have 1 clean/distclean target, but also have a way for board maintainers to inject their own custom clean files. preferably via a .mk file in their board subdir. this is moving in the direction of non- recursive make like the kernel does -- the top level would source all the subfiles to figure out the master clean list.
Quoted 5 lines
however, the current build system has one advantage which i think we should retain in the short term:
make distcleanalways cleans out the targets regardless of the current config. for example, if you domake bf537-stampfollowed bymake harmonyfollowed bymake distclean, Blackfin-specific objects will still get cleaned out.
Can we not have make distclean/mrproper traverse ALL arch/SoC/board directories and call their distclean/mrproper? Or have distclean/mrproper read the .mk file for all arch/SoC/board directories?
Sure, it would be a little slower, but IMHO one would expect a speed penalty from distclean/mrproper
I think that over the course of the next few releases, we will see more and more granulation of the code - more distinct boundaries put in place around 'arches', 'SoCs', 'boards', etc - making each less dependent on each other. My nirvana is for the ability to create an entirely new arch/SoC/board/driver/lib/whatever and have bare minimal (ideally zero) impact on anyone else.
I mean, it irks me to no end that /common/serial.c, /drivers/serial.c and /include/serial.h are such an ugly mess of #ifdef's - I'm working on a new SoC at the moment, and it just plain weird that I have to touch these :(
Regards,
Graeme
PATCH 1/1 punt unused clean/distclean targets
Quoted 29 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
Quoted 22 lines · Mike Frysinger
Quoted 11 lines · On Sunday, September 18, 2011 03:26:38 Wolfgang Denk wrote:
Quoted 3 lines · Mike Frysinger
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.I think this is the wrong approach. Would it not be better to get rid of the 60 lines of clean/clobber target in the top level
Makefile, including it's brute force methods of "find ... | xargs rm -f" and actually remove the files from the Makefiles in the respective directories instead?Quoted 3 lines
This would for example allow that a board maintainer can fix the clean / clobber rules for his code without having to edit the top level
Makefile.yes & no. i think we should have 1 clean/distclean target, but also have a way for board maintainers to inject their own custom clean files. preferably via a .mk file in their board subdir. this is moving in the direction of non- recursive make like the kernel does -- the top level would source all the subfiles to figure out the master clean list.
Quoted 5 lines
however, the current build system has one advantage which i think we should retain in the short term:
make distcleanalways cleans out the targets regardless of the current config. for example, if you domake bf537-stampfollowed bymake harmonyfollowed bymake distclean, Blackfin-specific objects will still get cleaned out.
Quoted 3 lines
Can we not have make distclean/mrproper traverse ALL
arch/SoC/boarddirectories and call their distclean/mrproper? Or have distclean/mrproper read the .mk file for allarch/SoC/boarddirectories?
if it wasn't clear in my last e-mail, i want to move in the direction of .mk files that the top level would include them and thus all the specific cruft would be kept there
after all, the list of things to clean should be obvious once we have more kbuild style system: if it's listed as a file to build, then it should get cleaned.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110919/8e2ccc03/attachment.pgp
PATCH 1/1 punt unused clean/distclean targets
Quoted 35 lines · Mike Frysinger
Quoted 30 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
Quoted 23 lines · Mike Frysinger
Quoted 11 lines · On Sunday, September 18, 2011 03:26:38 Wolfgang Denk wrote:
Quoted 3 lines · Mike Frysinger
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.I think this is the wrong approach. Would it not be better to get rid of the 60 lines of clean/clobber target in the top level
Makefile, including it's brute force methods of "find ... | xargs rm -f" and actually remove the files from the Makefiles in the respective directories instead?Quoted 3 lines
This would for example allow that a board maintainer can fix the clean / clobber rules for his code without having to edit the top level
Makefile.yes & no. i think we should have 1 clean/distclean target, but also have a way for board maintainers to inject their own custom clean files. preferably via a .mk file in their board subdir. this is moving in the direction of non- recursive make like the kernel does -- the top level would source all the subfiles to figure out the master clean list.
Quoted 5 lines
however, the current build system has one advantage which i think we should retain in the short term:
make distcleanalways cleans out the targets regardless of the current config. for example, if you domake bf537-stampfollowed bymake harmonyfollowed bymake distclean, Blackfin-specific objects will still get cleaned out.Quoted 3 lines
Can we not have make distclean/mrproper traverse ALL
arch/SoC/boarddirectories and call their distclean/mrproper? Or have distclean/mrproper read the .mk file for allarch/SoC/boarddirectories?
Quoted 7 lines
if it wasn't clear in my last e-mail, i want to move in the direction of .mk files that the top level would include them and thus all the specific cruft would be kept there
after all, the list of things to clean should be obvious once we have more kbuild style system: if it's listed as a file to build, then it should get cleaned.
And who's porting the kbuild style system to uboot, is there something like that going on already ?
Cheers
Quoted 1 line
-mike
PATCH 1/1 punt unused clean/distclean targets
Quoted 7 lines · On Monday, September 19, 2011 01:10:57 Marek Vasut wrote:
Quoted 3 lines · Mike Frysinger
after all, the list of things to clean should be obvious once we have more kbuild style system: if it's listed as a file to build, then it should get cleaned.
And who's porting the kbuild style system to uboot, is there something like that going on already ?
it's already being done in small steps. witness include/autoconf.mk and the proliferation of COBJS-$(FOO) in Makefiles.
but there isnt anyone driving it strongly ... just as someone hits a piece that'd be helpful, they implement it.
i think the next itch i'll scratch is unifying board/*/Makefile into like board/board.mk ... then it'll be a lot easier to migrate these further. -mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110919/11e131b0/attachment.pgp
PATCH 1/1 punt unused clean/distclean targets
Dear Mike Frysinger,
Quoted 3 lines · In message <[email protected]> you wrote:
i think the next itch i'll scratch is unifying board/*/Makefile into like
board/board.mk... then it'll be a lot easier to migrate these further.
This needs discussion. As mentioned before, I feat this will make the build system even more complex.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
There is is no reason for any individual to have a computer in their
home. -- Ken Olsen (President of Digital Equipment Corporation),
Convention of the World Future Society, in Boston, 1977PATCH 1/1 punt unused clean/distclean targets
In reply to Mike FrysingerHi Mike
Quoted 7 lines · Mike Frysinger
Quoted 6 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
Quoted 5 lines · Mike Frysinger
Quoted 4 lines · On Sunday, September 18, 2011 03:26:38 Wolfgang Denk wrote:
Quoted 3 lines · Mike Frysinger
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.
[snip]
Quoted 11 lines
Quoted 3 lines
Can we not have make distclean/mrproper traverse ALL
arch/SoC/boarddirectories and call their distclean/mrproper? Or have distclean/mrproper read the .mk file for allarch/SoC/boarddirectories?if it wasn't clear in my last e-mail, i want to move in the direction of .mk files that the top level would include them and thus all the specific cruft would be kept there
after all, the list of things to clean should be obvious once we have more kbuild style system: if it's listed as a file to build, then it should get cleaned.
'make distclean' and 'make mrproper' should delete ALL intermediate build files and basically return the local git repository to the same state that it would be in if you did a fresh git-clone regardless of what config options git set. So if one does:
make board_x-config
make all
cp u-boot.bin <somewhere>
make board_y-config
make all
cp u-boot.bin <somewhere else>
make mrproper
nothing should be left over from the build of 'board_x', even if it is a completely different arch that 'board_y'
The list of files to delete should be in the board_x and board_y config.mk files. Similiarly for arches and SoCs
Regards,
Graeme
PATCH 1/1 punt unused clean/distclean targets
Quoted 22 lines · On Monday, September 19, 2011 01:11:17 Graeme Russ wrote:
Hi Mike
Quoted 7 lines · Mike Frysinger
Quoted 6 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
Quoted 5 lines · Mike Frysinger
Quoted 4 lines · On Sunday, September 18, 2011 03:26:38 Wolfgang Denk wrote:
Quoted 3 lines · Mike Frysinger
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.[snip]
Quoted 9 lines
Quoted 4 lines
Can we not have make distclean/mrproper traverse ALL
arch/SoC/boarddirectories and call their distclean/mrproper? Or have distclean/mrproper read the .mk file for allarch/SoC/boarddirectories?if it wasn't clear in my last e-mail, i want to move in the direction of .mk files that the top level would include them and thus all the specific cruft would be kept there
Quoted 8 lines
Quoted 3 lines
after all, the list of things to clean should be obvious once we have more kbuild style system: if it's listed as a file to build, then it should get cleaned.
'make distclean' and 'make mrproper' should delete ALL intermediate build files and basically return the local git repository to the same state that it would be in if you did a fresh git-clone regardless of what config options git set.
yes. i dont believe i said anything differently.
remember that just because you have COBJS-$(FOO) doesnt mean you need FOO to be defined to have access to that item. you can just as easily do rm -f $(COBJS-) $(COBJS-y).
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110919/5fec8e57/attachment.pgp
PATCH 1/1 punt unused clean/distclean targets
In reply to Mike FrysingerDear Mike Frysinger,
Quoted 4 lines · In message <[email protected]> you wrote:
if it wasn't clear in my last e-mail, i want to move in the direction of .mk files that the top level would include them and thus all the specific cruft would be kept there
Why should we do that?
Having all build rules in a single, huge Makefile does not sound like something that is desirable (and in this context it does not make any difference if the file is actually a concatenation of all these build rules, or if it's hidden in a set of [probably even nested] includes).
I'm still a big friend of organizing complex stuff in small, hierarchical structured pieces, so I have to u nderstand it only a small bit at a time.
Yes, running a number of nested makes may have some performance penalty. But frankly: I care a ship about that when I can have the sofware design simpler and easier to maintain.
Quoted 3 lines
after all, the list of things to clean should be obvious once we have more kbuild style system: if it's listed as a file to build, then it should get cleaned.
Keep in mind that you said yourslef we always want to remove _all_ build results - this includes evne those not "listed as a file to buil" for a specific configuration setting.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Here is an Appalachian version of management's answer to those who are concerned with the fate of the project: "Don't worry about the mule. Just load the wagon." - Mike Dennison's hillbilly uncle
PATCH 1/1 punt unused clean/distclean targets
Quoted 12 lines · On Monday, September 19, 2011 02:54:35 Wolfgang Denk wrote:
Quoted 3 lines · Mike Frysinger
if it wasn't clear in my last e-mail, i want to move in the direction of .mk files that the top level would include them and thus all the specific cruft would be kept there
Why should we do that?
Having all build rules in a single, huge
Makefiledoes not sound like something that is desirable (and in this context it does not make any difference if the file is actually a concatenation of all these build rules, or if it's hidden in a set of [probably even nested] includes).
Quoted 7 lines
I'm still a big friend of organizing complex stuff in small, hierarchical structured pieces, so I have to u nderstand it only a small bit at a time.
Yes, running a number of nested makes may have some performance penalty. But frankly: I care a ship about that when I can have the sofware design simpler and easier to maintain.
i dont think my proposal will be more complex. however, i do think copying & pasting almost the same exact lines over and over across literally hundreds of Makefile's is a broken design.
Quoted 7 lines
Quoted 3 lines
after all, the list of things to clean should be obvious once we have more kbuild style system: if it's listed as a file to build, then it should get cleaned.
Keep in mind that you said yourslef we always want to remove _all_ build results - this includes evne those not "listed as a file to buil" for a specific configuration setting.
as i mentioned in another e-mail, you do get access to the complete list regardless of config. COBJS-$(FOO) evaluates to one of two lists: $(COBJS-y) or $(COBJS-).
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110919/c3698430/attachment.pgp
PATCH 1/1 punt unused clean/distclean targets
In reply to Wolfgang DenkQuoted 15 lines · Wolfgang Denk
Dear Mike Frysinger,
Quoted 4 lines · In message <[email protected]> you wrote:
if it wasn't clear in my last e-mail, i want to move in the direction of .mk files that the top level would include them and thus all the specific cruft would be kept there
Why should we do that?
Having all build rules in a single, huge
Makefiledoes not sound like something that is desirable (and in this context it does not make any difference if the file is actually a concatenation of all these build rules, or if it's hidden in a set of [probably even nested] includes).
Quoted 7 lines
I'm still a big friend of organizing complex stuff in small, hierarchical structured pieces, so I have to u nderstand it only a small bit at a time.
Yes, running a number of nested makes may have some performance penalty. But frankly: I care a ship about that when I can have the sofware design simpler and easier to maintain.
It's not just about build time. Recursive make adds complexity -- you not only need to know what you want to build, but which directory holds the makefile.
See http://lists.denx.de/pipermail/u-boot/2011-September/101551.html
You also get to play the game of which variables are passed on as variables, which are passed on as overrides, etc.
While dealing with make is never pleasant, I've found dealing with non-recursive setups to be in general less unpleasant than dealing with recursive make.
-Scott
[U-Boot] serial ifdef mess
In reply to Graeme RussQuoted 3 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
I mean, it irks me to no end that /common/serial.c, /drivers/serial.c and /include/serial.h are such an ugly mess of #ifdef's - I'm working on a new SoC at the moment, and it just plain weird that I have to touch these :(
well, there's two things there. the init mess which could get fixed in two diff ways: part of your larger init cleanup, or turn it into board callbacks like most of the other frameworks we have atm.
the second thing is the CONFIG_SERIAL_MULTI hell. that mess i'd like to gut with a dull blade at some point.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110919/2844b184/attachment.pgp
[U-Boot] serial ifdef mess
Hi Mike,
Quoted 8 lines · Mike Frysinger
Quoted 3 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
I mean, it irks me to no end that /common/serial.c, /drivers/serial.c and /include/serial.h are such an ugly mess of #ifdef's - I'm working on a new SoC at the moment, and it just plain weird that I have to touch these :(
well, there's two things there. the init mess which could get fixed in two diff ways: part of your larger init cleanup, or turn it into board callbacks like most of the other frameworks we have atm.
I don't think the serial mess is related to the init sequence at all (but I could be wrong)
Quoted 3 lines
the second thing is the
CONFIG_SERIAL_MULTIhell. that mess i'd like to gut with a dull blade at some point.
Or a sledgehammer!
The big question I suppose is where we are at with the _MULTI interfaces.
[U-Boot] serial ifdef mess
Quoted 9 lines · On Monday, September 19, 2011 20:41:20 Graeme Russ wrote:
Hi Mike,
Quoted 6 lines · Mike Frysinger
Quoted 4 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
I mean, it irks me to no end that /common/serial.c, /drivers/serial.c and /include/serial.h are such an ugly mess of #ifdef's - I'm working on a new SoC at the moment, and it just plain weird that I have to touch these :(
Quoted 6 lines
Quoted 3 lines
well, there's two things there. the init mess which could get fixed in two diff ways: part of your larger init cleanup, or turn it into board callbacks like most of the other frameworks we have atm.
I don't think the serial mess is related to the init sequence at all (but I could be wrong)
the only way to register a new serial device is to add a call to it in common/serial.c:serial_initialize(). and the only thing that func does is call all the various register funcs which are simply init calls.
Quoted 11 lines
Quoted 2 lines
the second thing is the
CONFIG_SERIAL_MULTIhell. that mess i'd like to gut with a dull blade at some point.Or a sledgehammer!
The big question I suppose is where we are at with the
_MULTIinterfaces. From what I can gather, these should now be the only ones in use and we should start to apply pressure on board maintainers (i.e. break their boards) to fix any depricated usage. I think the same philosophy should be applied to the various boards with 'flash.c' which should all be using CFI by now.
i dont have a problem with non-multi instances since it produces thinner code
i dont think there is anyone driving the serial core atm though ... i dont recall seeing any patches there other than new device drivers since ive been watching the list ...
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110919/898aa680/attachment.pgp
[U-Boot] serial ifdef mess
Hi Mike,
Quoted 14 lines · Mike Frysinger
Quoted 13 lines · On Monday, September 19, 2011 20:41:20 Graeme Russ wrote:
Hi Mike,
Quoted 9 lines · Mike Frysinger
Quoted 4 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
I mean, it irks me to no end that /common/serial.c, /drivers/serial.c and /include/serial.h are such an ugly mess of #ifdef's - I'm working on a new SoC at the moment, and it just plain weird that I have to touch these :(
well, there's two things there. the init mess which could get fixed in two diff ways: part of your larger init cleanup, or turn it into board callbacks like most of the other frameworks we have atm.
Quoted 6 lines
Quoted 2 lines
I don't think the serial mess is related to the init sequence at all (but I could be wrong)
the only way to register a new serial device is to add a call to it in common/serial.c:serial_initialize(). and the only thing that func does is call all the various register funcs which are simply init calls.
Ah, I see - I think I see an architectural thunk! about to happen ;)
Quoted 12 lines
Quoted 11 lines
Quoted 2 lines
the second thing is the
CONFIG_SERIAL_MULTIhell. that mess i'd like to gut with a dull blade at some point.Or a sledgehammer!
The big question I suppose is where we are at with the
_MULTIinterfaces. From what I can gather, these should now be the only ones in use and we should start to apply pressure on board maintainers (i.e. break their boards) to fix any depricated usage. I think the same philosophy should be applied to the various boards with 'flash.c' which should all be using CFI by now.
Quoted 5 lines
i dont have a problem with non-multi instances since it produces thinner code
i dont think there is anyone driving the serial core atm though ... i dont recall seeing any patches there other than new device drivers since ive been watching the list ...
Hmmm, so let me ponder (keep in mind I am not familiar with the serial code and do not have it in front of me)...
I can see two implementations that a board could decide to use
a) Use a particular serial driver directly - perfect if you have only one serial port (or don't care about the others)
b) Use the SERIAL_MULTI 'management layer' and 'register' each relavent serial port on the board. The board will need to define a (probably hard-coded) a default to handle I/O until the environment can be read and the hardware initialised to actually make the serial ports operational.
So in theory, we should be able to register an arbitrary number of serial ports, each with potentially different hardware and therefore different drivers. The board (or SoC) init function should be able to simply call serial_register() for each serial port with a name and info into how to talk to the hardware (hardware type, base address etc). The SERIAL_MULTI framework should then simply manage the list of serial devices and redirect I/O based on environment settings
Regards,
Graeme
[U-Boot] serial ifdef mess
Hi Graeme & Mike,
Quoted 44 lines · Graeme Russ
Hi Mike,
Quoted 14 lines · Mike Frysinger
Quoted 13 lines · On Monday, September 19, 2011 20:41:20 Graeme Russ wrote:
Hi Mike,
Quoted 9 lines · Mike Frysinger
Quoted 4 lines · On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
I mean, it irks me to no end that /common/serial.c, /drivers/serial.c and /include/serial.h are such an ugly mess of #ifdef's - I'm working on a new SoC at the moment, and it just plain weird that I have to touch these :(
well, there's two things there. ?the init mess which could get fixed in two diff ways: part of your larger init cleanup, or turn it into board callbacks like most of the other frameworks we have atm.
Quoted 6 lines
Quoted 2 lines
I don't think the serial mess is related to the init sequence at all (but I could be wrong)
the only way to register a new serial device is to add a call to it in common/serial.c:serial_initialize(). ?and the only thing that func does is call all the various register funcs which are simply init calls.
Ah, I see - I think I see an architectural thunk! about to happen ;)
Quoted 12 lines
Quoted 11 lines
Quoted 2 lines
the second thing is the
CONFIG_SERIAL_MULTIhell. ?that mess i'd like to gut with a dull blade at some point.Or a sledgehammer!
The big question I suppose is where we are at with the
_MULTIinterfaces. From what I can gather, these should now be the only ones in use and we should start to apply pressure on board maintainers (i.e. break their boards) to fix any depricated usage. I think the same philosophy should be applied to the various boards with 'flash.c' which should all be using CFI by now.Quoted 5 lines
i dont have a problem with non-multi instances since it produces thinner code
i dont think there is anyone driving the serial core atm though ... i dont recall seeing any patches there other than new device drivers since ive been watching the list ...
Quoted 7 lines
Hmmm, so let me ponder (keep in mind I am not familiar with the serial code and do not have it in front of me)...
I can see two implementations that a board could decide to use
a) Use a particular serial driver directly - perfect if you have only one ? serial port (or don't care about the others)
Do we really want this? Is the code overhead of SERIAL_MULTI so bad that people insist on not defining it? If so, can we reduce that code overhead? It doesn't seem like it should be large. Perhaps non-MULTI could be implemented by macros and inline functions in the header file?
Quoted 5 lines
b) Use the
SERIAL_MULTI'management layer' and 'register' each relavent ? serial port on the board. The board will need to define a (probably ? hard-coded) a default to handle I/O until the environment can be read ? and the hardware initialised to actually make the serial ports ? operational.
Prior to relocation there is a single console UART. I wonder whether it would be acceptable to buffer all output until after relocation? Serial init is the one peripheral still needed prior to reloc. At least this could be the default option, with something like CONFIG_EARLY_UART defined to revert to current behavior for debugging reasons.
Slightly more radical: just move the U-Boot banner, etc. into board_init_r. What could possible go wrong?
?
But to truly deal with your point, I don't think the environment tells the serial ports much. They get their registers address and settings from other places (normally hard-coded in the driver, perhaps in future through an fdt). It should be possible for any serial driver to output things before the env is loaded. To implement an early UART we simply need the serial layer to pass serial calls straight onto the selected driver without going through the mux or anything else that needs state. That bit already works...
Quoted 8 lines
So in theory, we should be able to register an arbitrary number of serial ports, each with potentially different hardware and therefore different drivers. The board (or SoC) init function should be able to simply call
serial_register()for each serial port with a name and info into how to talk to the hardware (hardware type, base address etc). TheSERIAL_MULTIframework should then simply manage the list of serial devices and redirect I/O based on environment settings
The main bugbear for me is that there is no handle passed to the serial functions. All of the serial devices should have an extra parameter at the start which is perhaps struct seral_device *, and that structure should have a ->priv member, pointing to a driver-specific structure which we can
use to store things like the port number / register address. So in
other words make it like most other driver layers in U-Boot.
This would clean up the eserial macros for one thing.
I don't think this is a huge job. What is a huge job is managing the resulting centithread, laundry costs for the asbestos suit, falling back to the status quo in stages, and Mike's mention of a dull gutting blade...
Perhaps we can avoid that by finding out if there is a real consensus on the list for a jolly good refactoring in the U-Boot serial code. I'll start the count:
1
Regards,
Simon
Quoted 9 lines
Regards,
Graeme
_______________________________________________
U-Boot mailing list
U-Boot at lists.denx.de
http://lists.denx.de/mailman/listinfo/u-boot
[U-Boot] serial ifdef mess
Quoted 9 lines · On Tuesday, September 20, 2011 00:28:30 Simon Glass wrote:
Quoted 2 lines · Graeme Russ
a) Use a particular serial driver directly - perfect if you have only one serial port (or don't care about the others)
Do we really want this? Is the code overhead of
SERIAL_MULTIso bad that people insist on not defining it? If so, can we reduce that code overhead? It doesn't seem like it should be large. Perhaps non-MULTI could be implemented by macros and inline functions in the header file?
MULTI: serial_puts looks up a struct in a linked list to find the device before calling the func pointer in that struct to the device-specific serial_puts
!MULTI: serial_puts writes char to hardware register
the latter sounds a lot more robust to me :). it might not be a recommended or default setting, but i think we should strive to keep that simplicity around.
Quoted 6 lines
Quoted 5 lines
b) Use the
SERIAL_MULTI'management layer' and 'register' each relavent serial port on the board. The board will need to define a (probably hard-coded) a default to handle I/O until the environment can be read and the hardware initialised to actually make the serial ports operational.
Quoted 6 lines
Prior to relocation there is a single console UART. I wonder whether it would be acceptable to buffer all output until after relocation? Serial init is the one peripheral still needed prior to reloc. At least this could be the default option, with something like
CONFIG_EARLY_UARTdefined to revert to current behavior for debugging reasons.
as a debugging tool, any buffer is not interesting. after that, it might be.
Quoted 8 lines
But to truly deal with your point, I don't think the environment tells the serial ports much. They get their registers address and settings from other places (normally hard-coded in the driver, perhaps in future through an fdt). It should be possible for any serial driver to output things before the env is loaded. To implement an early UART we simply need the serial layer to pass serial calls straight onto the selected driver without going through the mux or anything else that needs state. That bit already works...
!MULTI gives us a working early UART now. i know because the Blackfin port can output info to the serial port at pretty much power on.
Quoted 7 lines
The main bugbear for me is that there is no handle passed to the serial functions. All of the serial devices should have an extra parameter at the start which is perhaps struct
seral_device*, and that structure should have a ->priv member, pointing to a driver-specific structure which we can
use to store things like the port number / register address. So in
other words make it like most other driver layers in U-Boot.
yes, this would be the first thing i'd fix
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110920/e0ccf1e3/attachment.pgp
[U-Boot] serial ifdef mess
In reply to Simon GlassHi Simon,
Quoted 11 lines · Simon Glass
Hi Graeme & Mike,
Quoted 8 lines · Graeme Russ
Hi Mike,
Quoted 5 lines · Mike Frysinger
Quoted 4 lines · On Monday, September 19, 2011 20:41:20 Graeme Russ wrote:
Hi Mike,
Quoted 1 line · Mike Frysinger
On Sunday, September 18, 2011 09:08:35 Graeme Russ wrote:
[snip]
Quoted 11 lines
Quoted 5 lines
I can see two implementations that a board could decide to use
a) Use a particular serial driver directly - perfect if you have only one serial port (or don't care about the others)
Do we really want this? Is the code overhead of
SERIAL_MULTIso bad that people insist on not defining it? If so, can we reduce that code overhead? It doesn't seem like it should be large. Perhaps non-MULTI could be implemented by macros and inline functions in the header file?
Having a quick look via git web, no, SERIAL_MULTI does not look to add too much
Quoted 9 lines
Quoted 6 lines
b) Use the
SERIAL_MULTI'management layer' and 'register' each relavent serial port on the board. The board will need to define a (probably hard-coded) a default to handle I/O until the environment can be read and the hardware initialised to actually make the serial ports operational.Prior to relocation there is a single console UART. I wonder whether it would be acceptable to buffer all output until after relocation?
Nope - Some arches simply do not have the room for such a buffer. But for boards that can implement a pre-console buffer, you can buffer until environment is initialised and then output everything to the configured serial port
Quoted 1 line
Serial init is the one peripheral still needed prior to reloc. At
Timers are also needed pre-reloc
Quoted 3 lines
least this could be the default option, with something like
CONFIG_EARLY_UARTdefined to revert to current behavior for debugging reasons.
Yes, I like this idea. Even when using the pre-console buffer, pre- console output can still be sent to the 'early' UART so you get real-time output on the serial port as U-Boot is booting. You can then use your favourite serial terminal to look at the timing.
Quoted 2 lines
Slightly more radical: just move the U-Boot banner, etc. into
board_init_r. What could possible go wrong?
Agree - I think there is some pre-reloc output which could be moved to post-reloc
Quoted 2 lines
But to truly deal with your point, I don't think the environment tells the serial ports much. They get their registers address and settings
The environment can specify which port is used for console and the baud rate. So environement needs to be up before redirecting output through SERIAL_MULTI
Quoted 6 lines
from other places (normally hard-coded in the driver, perhaps in future through an fdt). It should be possible for any serial driver to output things before the env is loaded. To implement an early UART we simply need the serial layer to pass serial calls straight onto the selected driver without going through the mux or anything else that needs state. That bit already works...
That can be done via putc() in console.c - That is where I redirect to the pre-console buffer prior to console init. It would be trivial to also add an #ifdef CONFIG_EARLY_UART to redirect to early_uart_putc()
Quoted 16 lines
Quoted 7 lines
So in theory, we should be able to register an arbitrary number of serial ports, each with potentially different hardware and therefore different drivers. The board (or SoC) init function should be able to simply call
serial_register()for each serial port with a name and info into how to talk to the hardware (hardware type, base address etc). TheSERIAL_MULTIframework should then simply manage the list of serial devices and redirect I/O based on environment settingsThe main bugbear for me is that there is no handle passed to the serial functions. All of the serial devices should have an extra parameter at the start which is perhaps struct
seral_device*, and that structure should have a ->priv member, pointing to a driver-specific structure which we can
use to store things like the port number / register address. So in
other words make it like most other driver layers in U-Boot.
Quoted 1 line
This would clean up the eserial macros for one thing.
Yes, I hate them with a passion - I really dislike how all the serial port permutations are hard-coded. The extern mess in /include/serial.h really highlights the problem. And /drivers/serial/serial.c being so 16550 centric is so confusing when you also have /drivers/serial/ns16550.c And then you have /common/serial.c...
So maybe we trash externs in /include/serial.h and move the implementation of serial_initialize() out of /common/serial.c and into board/SoC files by define a weak alias at SoC level so a board can still call it and register additional serial ports on top. I think the initcall method I put forward before can get around that more cleanly (YMMV)
And tidy up /drivers/serial/serial.c to not reference ns16550
Quoted 4 lines
I don't think this is a huge job. What is a huge job is managing the resulting centithread, laundry costs for the asbestos suit, falling back to the status quo in stages, and Mike's mention of a dull gutting blade...
LOL - and mine is only just now dry from initcall :)
Quoted 5 lines
Perhaps we can avoid that by finding out if there is a real consensus on the list for a jolly good refactoring in the U-Boot serial code. I'll start the count:
1
2
[U-Boot] serial ifdef mess
In reply to Simon GlassDear Simon Glass,
Quoted 3 lines · In message <CAPnjgZ0hSsbvAH_5EEDBn5R92mPJCibOi-iWBz=neL8GVVwXFA@mail.gmail.com>…
Do we really want this? Is the code overhead of
SERIAL_MULTIso bad that people insist on not defining it? If so, can we reduce that code
I have not seen a single case yet where the overhead was a problem. It was always only the effort to change the code and re-test. For any new boards this is a non-issue.
Quoted 2 lines
Prior to relocation there is a single console UART. I wonder whether it would be acceptable to buffer all output until after relocation?
Strict no here.
Quoted 4 lines
Serial init is the one peripheral still needed prior to reloc. At least this could be the default option, with something like
CONFIG_EARLY_UARTdefined to revert to current behavior for debugging reasons.
That would just add complexity.
Quoted 2 lines
Slightly more radical: just move the U-Boot banner, etc. into
board_init_r. What could possible go wrong?
Serial output is an important debug tool during board bringup. I want to have serial output as soon as possible. This is one of the fundamental principles of U-Boot design I will not give up easily.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Never put off until tomorrow what you can put off indefinitely.
[U-Boot] serial ifdef mess
In reply to Graeme RussQuoted 2 lines · On Monday, September 19, 2011 21:07:48 Graeme Russ wrote:
a) Use a particular serial driver directly - perfect if you have only one serial port (or don't care about the others)
yes. this is what we have today with !SERIAL_MULTI. every serial driver implements serial_{init,puts,putc,tstc,getc,setbrg,set_baud}. this code works for exactly one device and is extremely thin. in the case of Blackfin UARTs, serial_putc() does two things: wait for the hardware FIFO to free up, and then writes the char to the hardware registers. serial_tstc() is a bit test of a single hardware status register read. you really can't get any simpler than this.
Quoted 5 lines
b) Use the
SERIAL_MULTI'management layer' and 'register' each relavent serial port on the board. The board will need to define a (probably hard-coded) a default to handle I/O until the environment can be read and the hardware initialised to actually make the serial ports operational.
atm, SERIAL_MULTI provides support for "early" output by means of the default_serial_console() function. but even this requires going through the .data section in order to lookup the func pointer to the device pointers. which means i dont think it works for the ports which do relocation on the fly. but i dont know as i havent worked at that level with the relevant arches before.
Quoted 3 lines
So in theory, we should be able to register an arbitrary number of serial ports, each with potentially different hardware and therefore different drivers.
this works today
Quoted 3 lines
The board (or SoC) init function should be able to simply call
serial_register()for each serial port with a name and info into how to talk to the hardware (hardware type, base address etc).
this is doable today, but the standard is to add all devices to common/serial.c:serial_initialize()
Quoted 2 lines
The
SERIAL_MULTIframework should then simply manage the list of serial devices and redirect I/O based on environment settings
which is what it does
one limitation of the current serial/stdio framework is that the serial multi core can only have one active device at a time. the stdio core can have one per channel: stdin, stderr, stdout. so this reminds me of the other goal:
merge serial framework into stdio framework.
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20110920/cd5b4bad/attachment.pgp
PATCH v2 1/1 punt unused clean/distclean targets
In reply to Mike FrysingerThe top level Makefile does not do any recursion into subdirs when cleaning, so these clean/distclean targets in random arch/board dirs never get used. Punt them all.
MAKEALL didn't report any errors related to this that I could see.
Signed-off-by Mike Frysinger <[email protected]>
---
v2
- add a few more makefiles since last patch
arch/arm/cpu/arm926ejs/spear/Makefile | 6 ------ arch/sh/cpu/sh2/Makefile | 6 ------ arch/sh/cpu/sh3/Makefile | 6 ------ arch/sh/cpu/sh4/Makefile | 6 ------ board/BuS/eb_cpux9k2/Makefile | 6 ------ board/LaCie/edminiv2/Makefile | 6 ------ board/LaCie/netspace_v2/Makefile | 6 ------ board/Marvell/aspenite/Makefile | 6 ------ board/Marvell/dkb/Makefile | 6 ------ board/Marvell/gplugd/Makefile | 6 ------ board/Marvell/guruplug/Makefile | 6 ------ board/Marvell/mv88f6281gtw_ge/Makefile | 6 ------ board/Marvell/openrd/Makefile | 6 ------ board/Marvell/rd6281a/Makefile | 6 ------ board/Marvell/sheevaplug/Makefile | 6 ------ board/Seagate/dockstar/Makefile | 6 ------ board/a4m072/Makefile | 6 ------ board/actux1/Makefile | 6 ------ board/actux2/Makefile | 6 ------ board/actux3/Makefile | 6 ------ board/actux4/Makefile | 6 ------ board/adder/Makefile | 6 ------ board/afeb9260/Makefile | 6 ------ board/alaska/Makefile | 6 ------ board/altera/nios2-generic/Makefile | 6 ------ board/amcc/acadia/Makefile | 6 ------ board/amcc/bamboo/Makefile | 6 ------ board/amcc/bluestone/Makefile | 6 ------ board/amcc/bubinga/Makefile | 6 ------ board/amcc/canyonlands/Makefile | 6 ------ board/amcc/ebony/Makefile | 6 ------ board/amcc/katmai/Makefile | 6 ------ board/amcc/kilauea/Makefile | 6 ------ board/amcc/luan/Makefile | 6 ------ board/amcc/makalu/Makefile | 6 ------ board/amcc/ocotea/Makefile | 6 ------ board/amcc/redwood/Makefile | 6 ------ board/amcc/sequoia/Makefile | 6 ------ board/amcc/taihu/Makefile | 6 ------ board/amcc/taishan/Makefile | 6 ------ board/amcc/walnut/Makefile | 6 ------ board/amcc/yosemite/Makefile | 6 ------ board/amcc/yucca/Makefile | 6 ------ board/amirix/ap1000/Makefile | 6 ------ board/apollon/Makefile | 6 ------ board/armltd/integrator/Makefile | 6 ------ board/armltd/versatile/Makefile | 6 ------ board/armltd/vexpress/Makefile | 6 ------ board/atmel/at91rm9200ek/Makefile | 6 ------ board/atmel/at91sam9260ek/Makefile | 6 ------ board/atmel/at91sam9261ek/Makefile | 6 ------ board/atmel/at91sam9263ek/Makefile | 6 ------ board/atmel/at91sam9m10g45ek/Makefile | 6 ------ board/atmel/at91sam9rlek/Makefile | 6 ------ board/balloon3/Makefile | 6 ------ board/bc3450/Makefile | 6 ------ board/bct-brettl2/Makefile | 6 ------ board/bf506f-ezkit/Makefile | 6 ------ board/bf518f-ezbrd/Makefile | 6 ------ board/bf525-ucr2/Makefile | 6 ------ board/bf526-ezbrd/Makefile | 6 ------ board/bf527-ad7160-eval/Makefile | 6 ------ board/bf527-ezkit/Makefile | 6 ------ board/bf527-sdp/Makefile | 6 ------ board/bf533-ezkit/Makefile | 6 ------ board/bf533-stamp/Makefile | 6 ------ board/bf537-minotaur/Makefile | 6 ------ board/bf537-pnav/Makefile | 6 ------ board/bf537-srv1/Makefile | 6 ------ board/bf537-stamp/Makefile | 6 ------ board/bf538f-ezkit/Makefile | 6 ------ board/bf548-ezkit/Makefile | 6 ------ board/bf561-acvilon/Makefile | 6 ------ board/bf561-ezkit/Makefile | 6 ------ board/blackstamp/Makefile | 6 ------ board/blackvme/Makefile | 6 ------ board/bluewater/snapper9260/Makefile | 6 ------ board/calao/sbc35_a9g20/Makefile | 6 ------ board/calao/tny_a9260/Makefile | 6 ------ board/canmb/Makefile | 6 ------ board/cerf250/Makefile | 6 ------ board/cm-bf527/Makefile | 6 ------ board/cm-bf533/Makefile | 6 ------ board/cm-bf537e/Makefile | 6 ------ board/cm-bf537u/Makefile | 6 ------ board/cm-bf548/Makefile | 6 ------ board/cm-bf561/Makefile | 6 ------ board/cm4008/Makefile | 6 ------ board/cm41xx/Makefile | 6 ------ board/cm5200/Makefile | 6 ------ board/cm_t35/Makefile | 6 ------ board/cmi/Makefile | 6 ------ board/cogent/Makefile | 6 ------ board/colibri_pxa270/Makefile | 6 ------ board/comelit/dig297/Makefile | 6 ------ board/cradle/Makefile | 6 ------ board/cray/L1/Makefile | 7 ------- board/csb226/Makefile | 6 ------ board/csb272/Makefile | 6 ------ board/csb472/Makefile | 6 ------ board/dave/PPChameleonEVB/Makefile | 6 ------ board/davedenx/aria/Makefile | 6 ------ board/davedenx/qong/Makefile | 6 ------ board/davinci/common/Makefile | 6 ------ board/davinci/da8xxevm/Makefile | 6 ------ board/davinci/dm355evm/Makefile | 6 ------ board/davinci/dm355leopard/Makefile | 6 ------ board/davinci/dm365evm/Makefile | 6 ------ board/davinci/dm6467evm/Makefile | 6 ------ board/davinci/dvevm/Makefile | 6 ------ board/davinci/ea20/Makefile | 6 ------ board/davinci/schmoogie/Makefile | 6 ------ board/davinci/sffsdr/Makefile | 6 ------ board/davinci/sonata/Makefile | 6 ------ board/dnp5370/Makefile | 6 ------ board/dvlhost/Makefile | 6 ------ board/eNET/Makefile | 6 ------ board/efikamx/Makefile | 6 ------ board/eltec/bab7xx/Makefile | 6 ------ board/eltec/elppc/Makefile | 6 ------ board/emk/top5200/Makefile | 6 ------ board/emk/top9000/Makefile | 6 ------ board/ep8248/Makefile | 6 ------ board/ep8260/Makefile | 6 ------ board/ep82xxm/Makefile | 6 ------ board/ep88x/Makefile | 6 ------ board/esd/adciop/Makefile | 6 ------ board/esd/apc405/Makefile | 6 ------ board/esd/ar405/Makefile | 6 ------ board/esd/ash405/Makefile | 6 ------ board/esd/canbt/Makefile | 6 ------ board/esd/cms700/Makefile | 6 ------ board/esd/cpci2dp/Makefile | 6 ------ board/esd/cpci405/Makefile | 6 ------ board/esd/cpci5200/Makefile | 6 ------ board/esd/cpciiser4/Makefile | 6 ------ board/esd/dasa_sim/Makefile | 6 ------ board/esd/dp405/Makefile | 6 ------ board/esd/du405/Makefile | 6 ------ board/esd/du440/Makefile | 6 ------ board/esd/hh405/Makefile | 6 ------ board/esd/hub405/Makefile | 6 ------ board/esd/mecp5123/Makefile | 6 ------ board/esd/mecp5200/Makefile | 6 ------ board/esd/meesc/Makefile | 6 ------ board/esd/ocrtc/Makefile | 6 ------ board/esd/otc570/Makefile | 6 ------ board/esd/pci405/Makefile | 6 ------ board/esd/pf5200/Makefile | 6 ------ board/esd/plu405/Makefile | 6 ------ board/esd/pmc405/Makefile | 6 ------ board/esd/pmc405de/Makefile | 6 ------ board/esd/pmc440/Makefile | 6 ------ board/esd/vme8349/Makefile | 6 ------ board/esd/voh405/Makefile | 6 ------ board/esd/vom405/Makefile | 6 ------ board/esd/wuh405/Makefile | 6 ------ board/espt/Makefile | 6 ------ board/eukrea/cpu9260/Makefile | 6 ------ board/eukrea/cpuat91/Makefile | 6 ------ board/faraday/a320evb/Makefile | 6 ------ board/freescale/common/Makefile | 6 ------ board/freescale/corenet_ds/Makefile | 6 ------ board/freescale/mpc5121ads/Makefile | 6 ------ board/freescale/mpc7448hpc2/Makefile | 7 ------- board/freescale/mpc8260ads/Makefile | 6 ------ board/freescale/mpc8266ads/Makefile | 6 ------ board/freescale/mpc8308rdb/Makefile | 6 ------ board/freescale/mpc8313erdb/Makefile | 6 ------ board/freescale/mpc8315erdb/Makefile | 6 ------ board/freescale/mpc8323erdb/Makefile | 6 ------ board/freescale/mpc832xemds/Makefile | 6 ------ board/freescale/mpc8349emds/Makefile | 6 ------ board/freescale/mpc8349itx/Makefile | 6 ------ board/freescale/mpc8360emds/Makefile | 6 ------ board/freescale/mpc8360erdk/Makefile | 6 ------ board/freescale/mpc837xemds/Makefile | 6 ------ board/freescale/mpc837xerdb/Makefile | 6 ------ board/freescale/mpc8536ds/Makefile | 6 ------ board/freescale/mpc8540ads/Makefile | 6 ------ board/freescale/mpc8541cds/Makefile | 6 ------ board/freescale/mpc8544ds/Makefile | 6 ------ board/freescale/mpc8548cds/Makefile | 6 ------ board/freescale/mpc8555cds/Makefile | 6 ------ board/freescale/mpc8560ads/Makefile | 6 ------ board/freescale/mpc8568mds/Makefile | 6 ------ board/freescale/mpc8569mds/Makefile | 6 ------ board/freescale/mpc8572ds/Makefile | 6 ------ board/freescale/mpc8610hpcd/Makefile | 7 ------- board/freescale/mpc8641hpcn/Makefile | 7 ------- board/freescale/mx25pdk/Makefile | 6 ------ board/freescale/mx31ads/Makefile | 6 ------ board/freescale/mx31pdk/Makefile | 6 ------ board/freescale/mx35pdk/Makefile | 6 ------ board/freescale/mx51evk/Makefile | 6 ------ board/freescale/mx53ard/Makefile | 6 ------ board/freescale/mx53evk/Makefile | 6 ------ board/freescale/mx53loco/Makefile | 6 ------ board/freescale/mx53smd/Makefile | 6 ------ board/freescale/p1010rdb/Makefile | 6 ------ board/freescale/p1022ds/Makefile | 6 ------ board/freescale/p1023rds/Makefile | 6 ------ board/freescale/p1_p2_rdb/Makefile | 6 ------ board/freescale/p1_p2_rdb_pc/Makefile | 6 ------ board/freescale/p2020ds/Makefile | 6 ------ board/freescale/p2041rdb/Makefile | 6 ------ board/funkwerk/vovpn-gw/Makefile | 6 ------ board/g2000/Makefile | 6 ------ board/gaisler/gr_cpci_ax2000/Makefile | 6 ------ board/gaisler/gr_ep2s60/Makefile | 6 ------ board/gaisler/gr_xc3s_1500/Makefile | 6 ------ board/gaisler/grsim/Makefile | 6 ------ board/gaisler/grsim_leon2/Makefile | 6 ------ board/galaxy5200/Makefile | 6 ------ board/gdsys/405ep/Makefile | 6 ------ board/gdsys/common/Makefile | 6 ------ board/gdsys/dlvision/Makefile | 6 ------ board/gdsys/gdppc440etx/Makefile | 6 ------ board/gdsys/intip/Makefile | 6 ------ board/gdsys/neo/Makefile | 6 ------ board/gw8260/Makefile | 6 ------ board/ibf-dsp561/Makefile | 6 ------ board/icecube/Makefile | 6 ------ board/imx31_phycore/Makefile | 6 ------ board/inka4x0/Makefile | 6 ------ board/innokom/Makefile | 6 ------ board/intercontrol/digsy_mtc/Makefile | 6 ------ board/ip04/Makefile | 6 ------ board/ipek01/Makefile | 6 ------ board/iphase4539/Makefile | 6 ------ board/isee/igep0020/Makefile | 6 ------ board/isee/igep0030/Makefile | 6 ------ board/ispan/Makefile | 6 ------ board/jornada/Makefile | 6 ------ board/jse/Makefile | 6 ------ board/jupiter/Makefile | 6 ------ board/karo/tx25/Makefile | 6 ------ board/keymile/km82xx/Makefile | 6 ------ board/keymile/km83xx/Makefile | 6 ------ board/keymile/km_arm/Makefile | 6 ------ board/korat/Makefile | 6 ------ board/logicpd/am3517evm/Makefile | 6 ------ board/logicpd/imx27lite/Makefile | 6 ------ board/logicpd/imx31_litekit/Makefile | 6 ------ board/logicpd/zoom1/Makefile | 6 ------ board/logicpd/zoom2/Makefile | 6 ------ board/lubbock/Makefile | 6 ------ board/lwmon5/Makefile | 6 ------ board/manroland/hmi1001/Makefile | 6 ------ board/manroland/mucmc52/Makefile | 6 ------ board/manroland/uc101/Makefile | 6 ------ board/matrix_vision/common/Makefile | 6 ------ board/matrix_vision/mergerbox/Makefile | 6 ------ board/matrix_vision/mvbc_p/Makefile | 6 ------ board/matrix_vision/mvblm7/Makefile | 6 ------ board/matrix_vision/mvsmr/Makefile | 6 ------ board/mcc200/Makefile | 6 ------ board/mercury/mpq101/Makefile | 6 ------ board/micronas/vct/Makefile | 6 ------ board/ml2/Makefile | 6 ------ board/mosaixtech/icon/Makefile | 6 ------ board/motionpro/Makefile | 6 ------ board/mpc8308_p1m/Makefile | 6 ------ board/mpl/mip405/Makefile | 6 ------ board/mpl/pati/Makefile | 6 ------ board/mpl/pip405/Makefile | 6 ------ board/mpl/vcma9/Makefile | 6 ------ board/mpr2/Makefile | 6 ------ board/ms7720se/Makefile | 6 ------ board/ms7722se/Makefile | 6 ------ board/ms7750se/Makefile | 6 ------ board/muas3001/Makefile | 6 ------ board/munices/Makefile | 6 ------ board/mx1ads/Makefile | 6 ------ board/ns9750dev/Makefile | 6 ------ board/nvidia/harmony/Makefile | 6 ------ board/nvidia/seaboard/Makefile | 6 ------ board/o2dnt/Makefile | 6 ------ board/overo/Makefile | 6 ------ board/palmld/Makefile | 6 ------ board/palmtc/Makefile | 6 ------ board/pandora/Makefile | 6 ------ board/pcs440ep/Makefile | 6 ------ board/pdm360ng/Makefile | 6 ------ board/phytec/pcm030/Makefile | 6 ------ board/pleb2/Makefile | 6 ------ board/pm520/Makefile | 6 ------ board/ppmc7xx/Makefile | 6 ------ board/ppmc8260/Makefile | 6 ------ board/prodrive/alpr/Makefile | 6 ------ board/prodrive/p3mx/Makefile | 6 ------ board/prodrive/p3p440/Makefile | 6 ------ board/prodrive/pdnb3/Makefile | 6 ------ board/psyent/pci5441/Makefile | 6 ------ board/psyent/pk1c20/Makefile | 6 ------ board/pxa255_idp/Makefile | 6 ------ board/qi/qi_lb60/Makefile | 5 ----- board/quad100hd/Makefile | 6 ------ board/rattler/Makefile | 6 ------ board/renesas/MigoR/Makefile | 6 ------ board/renesas/ap325rxa/Makefile | 6 ------ board/renesas/r2dplus/Makefile | 6 ------ board/renesas/r7780mp/Makefile | 6 ------ board/renesas/rsk7203/Makefile | 6 ------ board/renesas/rsk7264/Makefile | 6 ------ board/renesas/sh7757lcr/Makefile | 6 ------ board/renesas/sh7763rdp/Makefile | 6 ------ board/renesas/sh7785lcr/Makefile | 6 ------ board/ronetix/pm9261/Makefile | 6 ------ board/ronetix/pm9263/Makefile | 6 ------ board/ronetix/pm9g45/Makefile | 6 ------ board/rpxsuper/Makefile | 6 ------ board/rsdproto/Makefile | 6 ------ board/sacsng/Makefile | 6 ------ board/samsung/goni/Makefile | 6 ------ board/samsung/smdk2410/Makefile | 6 ------ board/samsung/smdk6400/Makefile | 6 ------ board/samsung/smdkc100/Makefile | 6 ------ board/samsung/universal_c210/Makefile | 6 ------ board/sandburst/karef/Makefile | 6 ------ board/sandburst/metrobox/Makefile | 6 ------ board/sbc405/Makefile | 6 ------ board/sbc8349/Makefile | 6 ------ board/sbc8548/Makefile | 6 ------ board/sbc8560/Makefile | 6 ------ board/sbc8641d/Makefile | 7 ------- board/sc3/Makefile | 6 ------ board/scb9328/Makefile | 6 ------ board/sheldon/simpc8313/Makefile | 6 ------ board/shmin/Makefile | 6 ------ board/siemens/SCM/Makefile | 6 ------ board/socrates/Makefile | 6 ------ board/sorcery/Makefile | 6 ------ board/spear/common/Makefile | 6 ------ board/spear/spear300/Makefile | 6 ------ board/spear/spear310/Makefile | 6 ------ board/spear/spear320/Makefile | 6 ------ board/spear/spear600/Makefile | 6 ------ board/st-ericsson/u8500/Makefile | 6 ------ board/st/nhk8815/Makefile | 6 ------ board/stx/stxgp3/Makefile | 6 ------ board/stx/stxssa/Makefile | 6 ------ board/sx1/Makefile | 6 ------ board/syteco/jadecpu/Makefile | 6 ------ board/syteco/zmx25/Makefile | 6 ------ board/t3corp/Makefile | 6 ------ board/tcm-bf518/Makefile | 6 ------ board/tcm-bf537/Makefile | 6 ------ board/ti/am3517crane/Makefile | 6 ------ board/ti/beagle/Makefile | 6 ------ board/ti/evm/Makefile | 6 ------ board/ti/omap1510inn/Makefile | 6 ------ board/ti/omap1610inn/Makefile | 6 ------ board/ti/omap2420h4/Makefile | 6 ------ board/ti/omap5912osk/Makefile | 6 ------ board/ti/omap730p2/Makefile | 6 ------ board/ti/panda/Makefile | 6 ------ board/ti/sdp3430/Makefile | 6 ------ board/ti/sdp4430/Makefile | 6 ------ board/ti/tnetv107xevm/Makefile | 6 ------ board/timll/devkit8000/Makefile | 6 ------ board/total5200/Makefile | 6 ------ board/tqc/tqm5200/Makefile | 6 ------ board/tqc/tqm834x/Makefile | 6 ------ board/tqc/tqm85xx/Makefile | 6 ------ board/trizepsiv/Makefile | 6 ------ board/ttcontrol/vision2/Makefile | 6 ------ board/v38b/Makefile | 6 ------ board/ve8313/Makefile | 6 ------ board/vpac270/Makefile | 6 ------ board/w7o/Makefile | 6 ------ board/xaeniax/Makefile | 6 ------ board/xes/common/Makefile | 6 ------ board/xes/xpedite1000/Makefile | 6 ------ board/xes/xpedite517x/Makefile | 6 ------ board/xes/xpedite520x/Makefile | 6 ------ board/xes/xpedite537x/Makefile | 6 ------ board/xes/xpedite550x/Makefile | 6 ------ board/xilinx/microblaze-generic/Makefile | 6 ------ board/xilinx/ppc405-generic/Makefile | 6 ------ board/xilinx/ppc440-generic/Makefile | 6 ------ board/xm250/Makefile | 6 ------ board/zeus/Makefile | 6 ------ board/zipitz2/Makefile | 6 ------ board/zpc1900/Makefile | 6 ------ fs/yaffs2/Makefile | 7 ------- 386 files changed, 0 insertions(+), 2321 deletions(-)
arch/arm/cpu/arm926ejs/spear/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
arch/sh/cpu/sh2/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
arch/sh/cpu/sh3/Makefile +0 -6
@@ -41,12 +41,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
arch/sh/cpu/sh4/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/BuS/eb_cpux9k2/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/LaCie/edminiv2/Makefile +0 -6
@@ -37,12 +37,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/LaCie/netspace_v2/Makefile +0 -6
@@ -33,12 +33,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/aspenite/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/dkb/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/gplugd/Makefile +0 -6
@@ -41,12 +41,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/guruplug/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/mv88f6281gtw_ge/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/openrd/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/rd6281a/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Marvell/sheevaplug/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/Seagate/dockstar/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/a4m072/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux1/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux2/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux3/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/actux4/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/adder/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/afeb9260/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/alaska/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/altera/nios2-generic/Makefile +0 -6
@@ -44,12 +44,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/acadia/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/bamboo/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/bluestone/Makefile +0 -6
@@ -38,12 +38,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/bubinga/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/canyonlands/Makefile +0 -6
@@ -39,12 +39,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/ebony/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/katmai/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/kilauea/Makefile +0 -6
@@ -35,12 +35,6 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/luan/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/makalu/Makefile +0 -6
@@ -34,12 +34,6 @@ OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/ocotea/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/redwood/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend *~ - ######################################################################### include $(SRCTREE)/rules.mk
board/amcc/sequoia/Makefile +0 -6
@@ -39,12 +39,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/taihu/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/taishan/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/walnut/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/yosemite/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amcc/yucca/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/amirix/ap1000/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/apollon/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/armltd/integrator/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(COBJS) $(SOBJS) $(call cmd_link_o_target, $(COBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(COBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/armltd/versatile/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/armltd/vexpress/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91rm9200ek/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9260ek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9261ek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9263ek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9m10g45ek/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/atmel/at91sam9rlek/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/balloon3/Makefile +0 -6
@@ -31,12 +31,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bc3450/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bct-brettl2/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - # defines $(obj).depend target include $(SRCTREE)/rules.mk
board/bf506f-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf518f-ezbrd/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf525-ucr2/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf526-ezbrd/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf527-ad7160-eval/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf527-ezkit/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf527-sdp/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf533-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf533-stamp/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-minotaur/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-pnav/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-srv1/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf537-stamp/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf538f-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf548-ezkit/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf561-acvilon/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bf561-ezkit/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/blackstamp/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/blackvme/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/bluewater/snapper9260/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/calao/sbc35_a9g20/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/calao/tny_a9260/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/canmb/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cerf250/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf527/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf533/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf537e/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf537u/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf548/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm-bf561/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm4008/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm41xx/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm5200/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cm_t35/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(AR) $(ARFLAGS) $@ $(OBJS) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cmi/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cogent/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/colibri_pxa270/Makefile +0 -6
@@ -31,12 +31,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/comelit/dig297/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cradle/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/cray/L1/Makefile +0 -7
@@ -38,13 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(obj)bootscript.o $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) $(obj)bootscript.c \ - $(obj)bootscript.image $(obj)bootscript.o - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - $(obj)$(BOARD).o : $(src)$(BOARD).c $(obj)bootscript.o $(obj)bootscript.c: $(obj)bootscript.image
board/csb226/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/csb272/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/csb472/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/dave/PPChameleonEVB/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/davedenx/aria/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/davedenx/qong/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/davinci/common/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/da8xxevm/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak *~ .depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm355evm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm355leopard/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm365evm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dm6467evm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/dvevm/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/ea20/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak *~ .depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/schmoogie/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/sffsdr/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/davinci/sonata/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # This is for $(obj).depend target include $(SRCTREE)/rules.mk
board/dnp5370/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/dvlhost/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eNET/Makefile +0 -6
@@ -42,12 +42,6 @@ OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/efikamx/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/eltec/bab7xx/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eltec/elppc/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/emk/top5200/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/emk/top9000/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep8248/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep8260/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep82xxm/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ep88x/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/adciop/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/apc405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/ar405/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/ash405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/canbt/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cms700/Makefile +0 -6
@@ -45,12 +45,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpci2dp/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpci405/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpci5200/Makefile +0 -6
@@ -43,12 +43,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/cpciiser4/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/dasa_sim/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/dp405/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/du405/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/du440/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/hh405/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/hub405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/mecp5123/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/mecp5200/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/meesc/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/ocrtc/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/otc570/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pci405/Makefile +0 -6
@@ -39,12 +39,6 @@ $(LIB): $(OBJS) $(SOBJS) # $(call cmd_link_o_target, $(OBJS)) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pf5200/Makefile +0 -6
@@ -44,12 +44,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/plu405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pmc405/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pmc405de/Makefile +0 -6
@@ -40,12 +40,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/pmc440/Makefile +0 -6
@@ -42,12 +42,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/vme8349/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/voh405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/vom405/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/esd/wuh405/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/espt/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eukrea/cpu9260/Makefile +0 -6
@@ -43,12 +43,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/eukrea/cpuat91/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/faraday/a320evb/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/common/Makefile +0 -6
@@ -70,12 +70,6 @@ $(LIB): $(obj).depend $(OBJS) $(SUBLIB) $(SUBLIB): $(obj).depend $(MAKE) -C $(dir $(subst $(obj),,$@)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/corenet_ds/Makefile +0 -6
@@ -42,12 +42,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc5121ads/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc7448hpc2/Makefile +0 -7
@@ -35,13 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8260ads/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8266ads/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8308rdb/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8313erdb/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8315erdb/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8323erdb/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc832xemds/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8349emds/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8349itx/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/freescale/mpc8360emds/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8360erdk/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc837xemds/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc837xerdb/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8536ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8540ads/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8541cds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8544ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8548cds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8555cds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8560ads/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8568mds/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8569mds/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8572ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8610hpcd/Makefile +0 -7
@@ -36,13 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mpc8641hpcn/Makefile +0 -7
@@ -36,13 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -.PHONY: distclean -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx25pdk/Makefile +0 -6
@@ -33,12 +33,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx31ads/Makefile +0 -6
@@ -31,12 +31,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx31pdk/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx35pdk/Makefile +0 -6
@@ -33,12 +33,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx51evk/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53ard/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53evk/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53loco/Makefile +0 -6
@@ -31,12 +31,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/mx53smd/Makefile +0 -6
@@ -32,12 +32,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1010rdb/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1022ds/Makefile +0 -6
@@ -25,12 +25,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1023rds/Makefile +0 -6
@@ -22,12 +22,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(AR) $(ARFLAGS) $@ $(OBJS) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1_p2_rdb/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p1_p2_rdb_pc/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p2020ds/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/freescale/p2041rdb/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/funkwerk/vovpn-gw/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/g2000/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/gr_cpci_ax2000/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/gr_ep2s60/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/gr_xc3s_1500/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/grsim/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gaisler/grsim_leon2/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/galaxy5200/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/405ep/Makefile +0 -6
@@ -39,12 +39,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/common/Makefile +0 -6
@@ -43,12 +43,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/dlvision/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/gdppc440etx/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/intip/Makefile +0 -6
@@ -39,12 +39,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gdsys/neo/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/gw8260/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ibf-dsp561/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/icecube/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/imx31_phycore/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/inka4x0/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/innokom/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/intercontrol/digsy_mtc/Makefile +0 -6
@@ -17,12 +17,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/ip04/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS-y)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ipek01/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/iphase4539/Makefile +0 -6
@@ -36,12 +36,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/isee/igep0020/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/isee/igep0030/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/ispan/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/jornada/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/jse/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/jupiter/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/karo/tx25/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/keymile/km82xx/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/keymile/km83xx/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/keymile/km_arm/Makefile +0 -6
@@ -38,12 +38,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target
board/korat/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/am3517evm/Makefile +0 -6
@@ -32,12 +32,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/imx27lite/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### include $(SRCTREE)/rules.mk
board/logicpd/imx31_litekit/Makefile +0 -6
@@ -35,12 +35,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(SOBJS) $(call cmd_link_o_target, $(OBJS) $(SOBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/zoom1/Makefile +0 -6
@@ -33,12 +33,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/logicpd/zoom2/Makefile +0 -6
@@ -37,12 +37,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/lubbock/Makefile +0 -6
@@ -34,12 +34,6 @@ OBJS := $(addprefix $(obj),$(COBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/lwmon5/Makefile +0 -6
@@ -37,12 +37,6 @@ all: $(LIB) $(SOBJS) $(LIB): $(OBJS) $(call cmd_link_o_target, $^) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/manroland/hmi1001/Makefile +0 -6
@@ -34,12 +34,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak $(obj).depend - ######################################################################### # defines $(obj).depend target
board/manroland/mucmc52/Makefile +0 -6
@@ -37,12 +37,6 @@ SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(SOBJS) $(OBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend
Lines of this file are not shown. View the raw message.
board/xilinx/microblaze-generic/Makefile +0 -6
Lines of this file are not shown. View the raw message.
The rest of this diff is not shown. View the raw message.
Signature · 1 line
1.7.6.1
Part of the diff is not shown here. View the raw message.
Wolfgang Denk
AppliedPATCH v2 1/1 punt unused clean/distclean targets
Dear Mike Frysinger,
Quoted 10 lines · In message <[email protected]> you wrote:
The top level
Makefiledoes not do any recursion into subdirs when cleaning, so these clean/distclean targets in randomarch/boarddirs never get used. Punt them all.MAKEALL didn't report any errors related to this that I could see.
Signed-off-by Mike Frysinger <[email protected]>---
v2
- add a few more makefiles since last patch
Applied, thanks.
Best regards,
Wolfgang Denk
Signature · 7 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Romulan women are not like Vulcan females. We are not dedicated to pure logic and the sterility of non-emotion. -- Romulan Commander, "The Enterprise Incident", stardate 5027.3