add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgi
A message that is not in the archive (sent off-list or not yet received): add fcgi-2.4.0 package to buildroot
PATCH 1/1 add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgi
--- package/Config.in | 1 + package/libfcgi/Config.in | 5 +++++ package/libfcgi/libfcgi.mk | 13 +++++++++++++ 3 files changed, 19 insertions(+), 0 deletions(-) create mode 100755 package/libfcgi/Config.in create mode 100755 package/libfcgi/libfcgi.mk
package/Config.in +1 -0
@@ -325,6 +325,7 @@ source "package/libcgicc/Config.in" source "package/libcurl/Config.in" source "package/libdnet/Config.in" source "package/libeXosip2/Config.in" +source "package/libfcgi/Config.in" source "package/libidn/Config.in" source "package/libmicrohttpd/Config.in" source "package/neon/Config.in"
package/libfcgi/Config.in new file +5 -0
@@ -0,0 +1,5 @@ +config BR2_PACKAGE_LIBFCGI + bool "libfcgi" + help + fastcgi developerslibrary + http://www.fastcgi.com/
package/libfcgi/libfcgi.mk new file +13 -0
@@ -0,0 +1,13 @@ +############################################################################## +# +# libfcgi +# +############################################################################## +LIBFCGI_VERSION = 2.4.0 +LIBFCGI_SOURCE = fcgi-$(LIBFCGI_VERSION).tar.gz +LIBFCGI_SITE = http://www.fastcgi.com/dist +LIBFCGI_INSTALL_STAGING = YES +LIBFCGI_INSTALL_TARGET = YES +LIBFCGI_CONF_OPT = --enable-shared + +$(eval $(call AUTOTARGETS,package,libfcgi))
Signature · 1 line
1.7.2.5
PATCH 1/1 add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgi
Hello,
Good for the usage of git send-email!
The patch title is too long. There should be one first line of < 80 characters, and then if you need to put some other details: one blank line, and then some other paragraphs.
And the -lm problem should be fixed rather than explained in the commit log :-)
Le Wed, 28 Sep 2011 16:13:20 +0200,
Rico Bachmann <[email protected]> a ?crit :
package/libfcgi/libfcgi.mk line 10
Quoted 10 lines
package/libfcgi/libfcgi.mk new file +10
-0+############################################################################## +# +# libfcgi +# +############################################################################## +LIBFCGI_VERSION = 2.4.0 +LIBFCGI_SOURCE = fcgi-$(LIBFCGI_VERSION).tar.gz +LIBFCGI_SITE = http://www.fastcgi.com/dist +LIBFCGI_INSTALL_STAGING = YES +LIBFCGI_INSTALL_TARGET = YES
Line not needed, this is the default.
Quoted 1 line
+LIBFCGI_CONF_OPT = --enable-shared
Line not needed, this is already part of the default configuration options.
Regards,
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgi
Quoted 9 lines
-----Urspr?ngliche Nachricht-----
Von: buildroot-bounces at busybox.net [mailto:buildroot- bounces at busybox.net] Im Auftrag von Thomas Petazzoni
Gesendet: Mittwoch, 28. September 2011 16:30
An: buildroot at busybox.net
Betreff: Re: [Buildroot] [PATCH] add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgi
Quoted 7 lines
Hello,
Good for the usage of git send-email!
The patch title is too long. There should be one first line of < 80 characters, and then if you need to put some other details: one blank line, and then some other paragraphs.
that wasn't planed ^^ i didn't know that all my comments get i to the subject.
next time i will use the blank line. Did i have to commit the patch a second time, because of the long subject?
Quoted 4 lines
And the -lm problem should be fixed rather than explained in the commit log :-)
i have 2 patches that fix that problem, but i don't know how to add patches to buildroot for files that are created in the build/fcgi-2.4.0/ when fcgi-2.4.0.tar.gz is unpacked
http://lists.busybox.net/pipermail/buildroot/2011-September/046084.html
in this link you can see the patches for 2 makefiles (they're attached to the mail). It is the solution to the -lm problem, but i don't know how to add that to buildroot.
Quoted 37 lines
Le Wed, 28 Sep 2011 16:13:20 +0200,
Rico Bachmann <[email protected]> a ?crit :Quoted 1 line
+######################################################################
########package/libfcgi/libfcgi.mk line 4
Quoted 4 lines
package/libfcgi/libfcgi.mk new file +3
-0+# +# libfcgi +#+######################################################################
########package/libfcgi/libfcgi.mk line 10
Quoted 5 lines
package/libfcgi/libfcgi.mk new file +5
-0+LIBFCGI_VERSION = 2.4.0 +LIBFCGI_SOURCE = fcgi-$(LIBFCGI_VERSION).tar.gz +LIBFCGI_SITE = http://www.fastcgi.com/dist +LIBFCGI_INSTALL_STAGING = YES +LIBFCGI_INSTALL_TARGET = YESLine not needed, this is the default.
Quoted 1 line
+LIBFCGI_CONF_OPT = --enable-shared
Line not needed, this is already part of the default configuration options.
Regards,
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot
PATCH 1/1 add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgi
Hello,
Le Wed, 28 Sep 2011 17:02:21 +0200,
"Rico Bachmann" <[email protected]> a ?crit :
Quoted 2 lines
that wasn't planed ^^ i didn't know that all my comments get i to the subject.
next time i will use the blank line. Did i have to commit the patch a second time, because of the long subject?
You can simply do a :
git commit --amend
to modify the commit message of the topmost commit.
Quoted 5 lines
i have 2 patches that fix that problem, but i don't know how to add patches to buildroot for files that are created in the build/fcgi-2.4.0/ when fcgi-2.4.0.tar.gz is unpacked
http://lists.busybox.net/pipermail/buildroot/2011-September/046084.html
in this link you can see the patches for 2 makefiles (they're attached to the mail). It is the solution to the -lm problem, but i don't know how to add that to buildroot.
Simply add them in package/fcgi/, under a name like fcgi-2.4.0-some-useful-description.patch.
Thomas
Signature · 4 lines
Thomas Petazzoni, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com
PATCH 1/1 add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgi
In reply to Rico BachmannQuoted 43 lines
-----Urspr?ngliche Nachricht-----
Von: buildroot-bounces at busybox.net [mailto:buildroot- bounces at busybox.net] Im Auftrag von Rico Bachmann
Gesendet: Mittwoch, 28. September 2011 17:02
An: buildroot at busybox.net
Cc: 'Thomas Petazzoni'
Betreff: Re: [Buildroot] [PATCH] add libfcgi to buildroot it will have compiling errors as long as -lm isnt added to the buildsystem of libfcgiQuoted 6 lines
-----Urspr?ngliche Nachricht-----
Von: buildroot-bounces at busybox.net [mailto:buildroot- bounces at busybox.net] Im Auftrag von Thomas Petazzoni
Gesendet: Mittwoch, 28. September 2011 16:30
An: buildroot at busybox.net
Betreff: Re: [Buildroot] [PATCH] add libfcgi to buildroot it willhave
Quoted 10 lines
compiling errors as long as -lm isnt added to the buildsystem of libfcgi
Hello,
Good for the usage of git send-email!
The patch title is too long. There should be one first line of < 80 characters, and then if you need to put some other details: one blank line, and then some other paragraphs.
that wasn't planed ^^ i didn't know that all my comments get i to the subject.
next time i will use the blank line. Did i have to commit the patch a second time, because of the long subject?Quoted 2 lines
And the -lm problem should be fixed rather than explained in the
commit
Quoted 2 lines
log :-)
i have 2 patches that fix that problem, but i don't know how to add patches to buildroot for files that are created in the build/fcgi- 2.4.0/ when fcgi-2.4.0.tar.gz is unpacked
Quoted 5 lines
http://lists.busybox.net/pipermail/buildroot/2011-September/046084.html
in this link you can see the patches for 2 makefiles (they're attached to the mail). It is the solution to the -lm problem, but i don't know how to add that to buildroot.
Did I see that right? i just have to add a libfcgi.patch file to the package/libfcgi/ folder? If it is that way, i will upload tomorrow a full functional patch, and the libfcgi will be included to buildroot
Quoted 45 lines
Quoted 6 lines
Le Wed, 28 Sep 2011 16:13:20 +0200,
Rico Bachmann <[email protected]> a ?crit :Quoted 1 line
+######################################################################
Quoted 6 lines
########
package/libfcgi/libfcgi.mk line 4
Quoted 4 lines
package/libfcgi/libfcgi.mk new file +3
-0+# +# libfcgi +#+######################################################################
Quoted 16 lines
########
package/libfcgi/libfcgi.mk line 10
Quoted 5 lines
package/libfcgi/libfcgi.mk new file +5
-0+LIBFCGI_VERSION = 2.4.0 +LIBFCGI_SOURCE = fcgi-$(LIBFCGI_VERSION).tar.gz +LIBFCGI_SITE = http://www.fastcgi.com/dist +LIBFCGI_INSTALL_STAGING = YES +LIBFCGI_INSTALL_TARGET = YESLine not needed, this is the default.
Quoted 1 line
+LIBFCGI_CONF_OPT = --enable-shared
Line not needed, this is already part of the default configuration options.
Regards,
Quoted 10 lines
Thomas
--
Thomas Petazzoni, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot_______________________________________________
buildroot mailing list
buildroot at busybox.net
http://lists.busybox.net/mailman/listinfo/buildroot