sky2 bridge hw csum error since 3.0.6
Subsystems (2)
A message that is not in the archive (sent off-list or not yet received): [email protected]
Quoted 54 lines · On Wed, 05 Oct 2011 15:37:12 +0200 Tobias Powalowski…
Hi,
here the log of the new 3.0.6 kernel and my sky2 ethernet card:
eth0: hw csum failure.[ 47.462091] Pid: 0, comm: swapper Not tainted 3.0-ARCH #1 [ 47.462094] Call Trace: [ 47.462097] <IRQ> [<ffffffff81334ca2>] netdev_rx_csum_fault+0x42/0x50 [ 47.462112] [<ffffffff8132b700>] __skb_checksum_complete_head+0x60/0x70 [ 47.462116] [<ffffffff8132b721>] __skb_checksum_complete+0x11/0x20 [ 47.462128] [<ffffffffa05bcfba>] br_multicast_rcv+0x32a/0x1350 [bridge] [ 47.462134] [<ffffffff8136758e>] ? ip_rcv+0x21e/0x2f0 [ 47.462140] [<ffffffff8121aa96>] ? cpumask_next_and+0x36/0x50 [ 47.462145] [<ffffffff8104a64d>] ? select_task_rq_fair+0x53d/0x9e0 [ 47.462152] [<ffffffffa05b3fd0>] ? br_handle_local_finish+0x50/0x50 [bridge] [ 47.462159] [<ffffffffa05b3fd0>] ? br_handle_local_finish+0x50/0x50 [bridge] [ 47.462165] [<ffffffffa05b4087>] br_handle_frame_finish+0xb7/0x2a0 [bridge] [ 47.462172] [<ffffffffa05b9e88>] br_nf_pre_routing_finish_ipv6+0x108/0x160 [bridge] [ 47.462178] [<ffffffffa05ba8dc>] br_nf_pre_routing+0x55c/0x710 [bridge] [ 47.462183] [<ffffffff81055b10>] ? try_to_wake_up+0x290/0x290 [ 47.462188] [<ffffffff8135f7f5>] nf_iterate+0x85/0xc0 [ 47.462194] [<ffffffffa05b3fd0>] ? br_handle_local_finish+0x50/0x50 [bridge] [ 47.462198] [<ffffffff8135f8ae>] nf_hook_slow+0x7e/0x130 [ 47.462204] [<ffffffffa05b3fd0>] ? br_handle_local_finish+0x50/0x50 [bridge] [ 47.462210] [<ffffffff81380da1>] ? tcp_rcv_established+0x4d1/0x830 [ 47.462216] [<ffffffffa05b4420>] br_handle_frame+0x1b0/0x270 [bridge] [ 47.462222] [<ffffffffa05b4270>] ? br_handle_frame_finish+0x2a0/0x2a0 [bridge] [ 47.462227] [<ffffffff8133415e>] __netif_receive_skb+0x16e/0x660 [ 47.462232] [<ffffffff81334e2d>] netif_receive_skb+0xad/0xc0 [ 47.462236] [<ffffffff813357a0>] napi_skb_finish+0x50/0x70 [ 47.462240] [<ffffffff81335875>] napi_gro_receive+0xb5/0xc0 [ 47.462256] [<ffffffffa028cce3>] sky2_poll+0x693/0xce0 [sky2] [ 47.462260] [<ffffffff8136758e>] ? ip_rcv+0x21e/0x2f0 [ 47.462265] [<ffffffff81334302>] ? __netif_receive_skb+0x312/0x660 [ 47.462269] [<ffffffff81335109>] net_rx_action+0x149/0x300 [ 47.462274] [<ffffffff81063e40>] __do_softirq+0xb0/0x270 [ 47.462279] [<ffffffff813f711c>] call_softirq+0x1c/0x30 [ 47.462283] [<ffffffff8100da75>] do_softirq+0x65/0xa0 [ 47.462287] [<ffffffff8106434e>] irq_exit+0x9e/0xc0 [ 47.462291] [<ffffffff813f7973>] do_IRQ+0x63/0xe0 [ 47.462296] [<ffffffff813f5653>] common_interrupt+0x13/0x13 [ 47.462298] <EOI> [<ffffffff81014375>] ? mwait_idle+0x95/0x2e0 [ 47.462307] [<ffffffff8100a21a>] cpu_idle+0xba/0x100 [ 47.462311] [<ffffffff813d31f2>] rest_init+0x96/0xa4 [ 47.462315] [<ffffffff81748c23>] start_kernel+0x3de/0x3eb [ 47.462319] [<ffffffff81748347>] x86_64_start_reservations+0x132/0x136 [ 47.462323] [<ffffffff81748140>] ? early_idt_handlers+0x140/0x140 [ 47.462327] [<ffffffff8174844d>] x86_64_start_kernel+0x102/0x111
Quoted 4 lines
thanks for your help,
kernel 3.0.4 is not affected by this.
greetings
tpowa
There were no changes to the sky2 driver between 3.0.4 and 3.0.6 but there were changes to multicast tracking. A couple of other pieces of information that might help. First, what is the chip type:
dmesg | grep sky2
And could you try 'git bisect' to narrow the problem down to a particular change.
Thanks
P.s: adding netdev list to this to make discussion public.