ata_piix: SITRE handling fix
PATCH v2 1/4 ata_piix: SITRE handling fix
From: Bartlomiej Zolnierkiewicz <[email protected]>
Subject: [PATCH v2] ata_piix: SITRE handling fix
Set SITRE (separate slave timing register) bit also in master-only configurations to match other PIIX-alike drivers and make further changes easier.
Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>
---
v2: updated patch description
earlier references:
https://lkml.org/lkml/2011/2/8/98
drivers/ata/ata_piix.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
drivers/ata/ata_piix.c +3 -2
@@ -750,8 +750,6 @@ static void piix_set_timings(struct ata_if (is_slave) {/* clear TIME1|IE1|PPE1|DTE1 */ master_data &=0xff0f ; -/* Enable SITRE (separate slave timing register) */ - master_data |=0x4000 ;/* enable PPE1, IE1 and TIME1 as needed */ master_data |= (control <<4 );pci_read_config_byte (dev, slave_port, &slave_data);
@@ -769,6 +767,9 @@ static void piix_set_timings(struct ata_ (timings[pio][0 ] <<12 ) | (timings[pio][1 ] <<8 ); } + +/* Enable SITRE (separate slave timing register) */ + master_data |=0x4000 ;pci_write_config_word (dev, master_port, master_data);if (is_slave)pci_write_config_byte (dev, slave_port, slave_data);