Skip to contentSkip to conversation

pata_efar: fix register naming used in efar_set_piomode()

PATCH New Bartlomiej Zolnierkiewicz 1 participant 1 message Oct 13, 2011 libata

lore
Share & tools
lore

Bartlomiej Zolnierkiewicz

author
#0 lore raw

PATCH v2 1/1 pata_efar: fix register naming used in efar_set_piomode()

From: Bartlomiej Zolnierkiewicz <[email protected]>
Subject: [PATCH v2] pata_efar: fix register naming used in efar_set_piomode()

Rename 'idetm_port' and 'idetm_data' variables to 'master_port' and 'master_data' respectively to match register naming used in efar_set_dmamode() and in ata_piix.c.

Fix efar_set_piomode() documentation while at it.

Signed-off-by Bartlomiej Zolnierkiewicz <[email protected]>

---
v2: don't change idetm_port type

earlier references:
https://lkml.org/lkml/2011/2/8/100

 drivers/ata/pata_efar.c |   22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
drivers/ata/pata_efar.c +11 -11
Index: b/drivers/ata/pata_efar.c
===================================================================
@@ -73,7 +73,7 @@ static DEFINE_SPINLOCK(efar_lock);
 /**
  *	efar_set_piomode - Initialize host controller PATA PIO timings
  *	@ap: Port whose timings we are configuring
- *	@adev: um
+ *	@adev: Device to program
  *
  *	Set PIO mode for device, in host controller PCI config space.
  *

@@ -85,9 +85,9 @@ static void efar_set_piomode (struct ata
 {
 	unsigned int pio	= adev->pio_mode - XFER_PIO_0;
 	struct pci_dev *dev	= to_pci_dev(ap->host->dev);
-	unsigned int idetm_port= ap->port_no ? 0x42 : 0x40;
+	unsigned int master_port = ap->port_no ? 0x42 : 0x40;
 	unsigned long flags;
-	u16 idetm_data;
+	u16 master_data;
 	u8 udma_enable;
 	int control = 0;
 

@@ -113,20 +113,20 @@ static void efar_set_piomode (struct ata
 
 	spin_lock_irqsave(&efar_lock, flags);
 
-	pci_read_config_word(dev, idetm_port, &idetm_data);
+	pci_read_config_word(dev, master_port, &master_data);
 
 	/* Set PPE, IE, and TIME as appropriate */
 	if (adev->devno == 0) {
-		idetm_data &= 0xCCF0;
-		idetm_data |= control;
-		idetm_data |= (timings[pio][0] << 12) |
+		master_data &= 0xCCF0;
+		master_data |= control;
+		master_data |= (timings[pio][0] << 12) |
 			(timings[pio][1] << 8);
 	} else {
 		int shift = 4 * ap->port_no;
 		u8 slave_data;
 
-		idetm_data &= 0xFF0F;
-		idetm_data |= (control << 4);
+		master_data &= 0xFF0F;
+		master_data |= (control << 4);
 
 		/* Slave timing in separate register */
 		pci_read_config_byte(dev, 0x44, &slave_data);

@@ -135,8 +135,8 @@ static void efar_set_piomode (struct ata
 		pci_write_config_byte(dev, 0x44, slave_data);
 	}
 
-	idetm_data |= 0x4000;	/* Ensure SITRE is set */
-	pci_write_config_word(dev, idetm_port, idetm_data);
+	master_data |= 0x4000;	/* Ensure SITRE is set */
+	pci_write_config_word(dev, master_port, master_data);
 
 	pci_read_config_byte(dev, 0x48, &udma_enable);
 	udma_enable &= ~(1 << (2 * ap->port_no + adev->devno));